ST / X_NUCLEO_IDB0XA1

BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)

Dependents:   Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more

Fork of X_NUCLEO_IDB0XA1 by ST Expansion SW Team

Arduino Connector Compatibility Warning

X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13 for the SPI clock, they use pin D3. The default configuration for this library is having the SPI clock on pin D3.

To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.

For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10 and instead soldering zero resistor R11. For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4 and instead soldering zero resistor R6.

In case you patch your board, then you also have to configure this library to use pin D13 to drive the SPI clock (see macro IDB0XA1_D13_PATCH in file x_nucleo_idb0xa1_targets.h).

If you use pin D13 for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13.

Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.

x-nucleo-idb0xa1/bluenrg-hci/ble_list.h

Committer:
Andrea Palmieri
Date:
2016-09-16
Revision:
307:fa98703ece8e
Parent:
280:fbee0e3444be

File content as of revision 307:fa98703ece8e:

/******************** (C) COPYRIGHT 2012 STMicroelectronics ********************
* File Name          : list.h
* Author             : AMS - HEA&RF BU
* Version            : V1.0.0
* Date               : 19-July-2012
* Description        : Header file for linked list library.
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/
#ifndef _LIST_H_
#define _LIST_H_

typedef struct _tListNode {
	struct _tListNode * next;
	struct _tListNode * prev;
}tListNode, *pListNode;

void list_init_head (tListNode * listHead);

uint8_t list_is_empty (tListNode * listHead);

void list_insert_head (tListNode * listHead, tListNode * node);

void list_insert_tail (tListNode * listHead, tListNode * node);

void list_remove_node (tListNode * node);

void list_remove_head (tListNode * listHead, tListNode ** node );

void list_remove_tail (tListNode * listHead, tListNode ** node );

void list_insert_node_after (tListNode * node, tListNode * ref_node);

void list_insert_node_before (tListNode * node, tListNode * ref_node);

int list_get_size (tListNode * listHead);

void list_get_next_node (tListNode * ref_node, tListNode ** node);

void list_get_prev_node (tListNode * ref_node, tListNode ** node);

#endif /* _LIST_H_ */