ST / X_NUCLEO_IDB0XA1

BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)

Dependents:   Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more

Fork of X_NUCLEO_IDB0XA1 by ST Expansion SW Team

Arduino Connector Compatibility Warning

X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13 for the SPI clock, they use pin D3. The default configuration for this library is having the SPI clock on pin D3.

To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.

For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10 and instead soldering zero resistor R11. For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4 and instead soldering zero resistor R6.

In case you patch your board, then you also have to configure this library to use pin D13 to drive the SPI clock (see macro IDB0XA1_D13_PATCH in file x_nucleo_idb0xa1_targets.h).

If you use pin D13 for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13.

Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.

x-nucleo-idb0xa1/platform/stm32_bluenrg_ble.h

Committer:
Wolfgang Betz
Date:
2015-10-07
Revision:
132:51056160fa4a
Child:
289:980efe0d2975

File content as of revision 132:51056160fa4a:

/**
  ******************************************************************************
  * @file    stm32_bluenrg_ble.h
  * @author  CL
  * @version V1.0.1
  * @date    15-June-2014
  * @brief   
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */ 
  
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32_BLUENRG_BLE_H
#define __STM32_BLUENRG_BLE_H

#ifdef __cplusplus
 extern "C" {
#endif 	 
	 

#include <stdint.h>
#include "gp_timer.h"
#include "hal.h"

/** @addtogroup BSP
 *  @{
 */

/** @addtogroup X-NUCLEO-IDB04A1
 *  @{
 */
 
/** @addtogroup STM32_BLUENRG_BLE
 *  @{
 */

/** @defgroup STM32_BLUENRG_BLE_Exported_Functions 
 * @{
 */
  
// FIXME: add prototypes for BlueNRG here
void BlueNRG_RST(void);
uint8_t BlueNRG_DataPresent(void);
void    BlueNRG_HW_Bootloader(void);
int32_t BlueNRG_SPI_Read_All(uint8_t *buffer,
                             uint8_t buff_size);
int32_t BlueNRG_SPI_Write(uint8_t* data1,
                          uint8_t* data2,
                          uint8_t Nb_bytes1,
                          uint8_t Nb_bytes2);
void Clear_SPI_EXTI_Flag(void);

void print_csv_time(void);

/**
 * @}
 */

/**
 * @}
 */

/**
 * @}
 */
 
/**
 * @}
 */
 
#ifdef __cplusplus
}
#endif

#endif /* __STM32_BLUENRG_BLE_H */
    
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/