BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: source/BlueNRGGap.cpp
- Revision:
- 135:f0b6cf8ac4fc
- Parent:
- 132:51056160fa4a
- Child:
- 138:32e3c4ca7a45
--- a/source/BlueNRGGap.cpp Wed Oct 07 14:34:24 2015 +0200 +++ b/source/BlueNRGGap.cpp Wed Oct 07 15:35:34 2015 +0200 @@ -261,7 +261,7 @@ { PRINTF("Advertising type: ADVERTISING_INTERVAL\n\r"); advtInterval = (uint16_t)(*loadPtr.getUnitAtIndex(index).getDataPtr()); - PRINTF("advtInterval=%d\n\r", advtInterval); + PRINTF("advtInterval=%d\n\r", (int)advtInterval); break; } case GapAdvertisingData::MANUFACTURER_SPECIFIC_DATA: /**< Manufacturer Specific Data */ @@ -289,7 +289,7 @@ * ADV timeout callback */ // ANDREA: mbedOS -#ifdef YOTTA_CFG +#ifdef YOTTA_CFG_MBED_OS static void advTimeoutCB(void) { Gap::GapState_t state; @@ -316,7 +316,7 @@ } } -#endif /* YOTTA_CFG */ +#endif /* YOTTA_CFG_MBED_OS */ /**************************************************************************/ /*! @@ -456,7 +456,7 @@ if(params.getTimeout() != 0) { PRINTF("!!! attaching to!!!\n"); // ANDREA: mbedOS -#ifdef YOTTA_CFG +#ifdef YOTTA_CFG_MBED_OS minar::Scheduler::postCallback(advTimeoutCB).delay(minar::milliseconds(params.getTimeout())); #else advTimeout.attach(advTimeoutCB, params.getTimeout());