BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: source/BlueNRGGap.cpp
- Revision:
- 224:d8669b6b3175
- Parent:
- 223:36df860f7ffc
- Child:
- 228:25368f053411
--- a/source/BlueNRGGap.cpp Fri Apr 08 17:42:38 2016 +0200 +++ b/source/BlueNRGGap.cpp Tue Apr 12 18:07:16 2016 +0200 @@ -1002,64 +1002,6 @@ return BLE_ERROR_NONE; } -/**************************************************************************/ -/*! - @brief Gets the value of maximum advertising interval in ms - - @returns uint16_t - - @retval value of maximum advertising interval in ms - - @section EXAMPLE - - @code - - @endcode -*/ -/**************************************************************************/ -uint16_t BlueNRGGap::getMaxAdvertisingInterval(void) const { - return advtInterval; -} - - -/**************************************************************************/ -/*! - @brief Gets the value of minimum advertising interval in ms - - @returns uint16_t - - @retval value of minimum advertising interval in ms - - @section EXAMPLE - - @code - - @endcode -*/ -/**************************************************************************/ -uint16_t BlueNRGGap::getMinAdvertisingInterval(void) const { - return 0; // minimum Advertising interval is 0 -} - -/**************************************************************************/ -/*! - @brief Gets the value of minimum non connectable advertising interval in ms - - @returns uint16_t - - @retval value of minimum non connectable advertising interval in ms - - @section EXAMPLE - - @code - - @endcode -*/ -/**************************************************************************/ -uint16_t BlueNRGGap::getMinNonConnectableAdvertisingInterval(void) const { - return BLE_GAP_ADV_NONCON_INTERVAL_MIN; -} - GapScanningParams* BlueNRGGap::getScanningParams(void) { return &_scanningParams;