BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: source/BlueNRGGattServer.cpp
- Revision:
- 209:d7cb3b3d0295
- Parent:
- 205:2b4afe8ce1a0
- Parent:
- 207:b9df918d6d5a
- Child:
- 242:058b2e731adc
--- a/source/BlueNRGGattServer.cpp Mon Dec 07 15:47:02 2015 +0100 +++ b/source/BlueNRGGattServer.cpp Tue Dec 15 12:27:48 2015 +0100 @@ -92,8 +92,7 @@ if(type==UUID::UUID_TYPE_LONG) { base_uuid = (service.getUUID()).getBaseUUID(); - COPY_UUID_128(primary_base_uuid, base_uuid[15],base_uuid[14],base_uuid[13],base_uuid[12],base_uuid[11],base_uuid[10],base_uuid[9], - base_uuid[8],base_uuid[7],base_uuid[6],base_uuid[5],base_uuid[4],primary_short_uuid[1],primary_short_uuid[0],base_uuid[1],base_uuid[0]); + COPY_UUID_128(primary_base_uuid, base_uuid[15],base_uuid[14],primary_short_uuid[1],primary_short_uuid[0],base_uuid[11],base_uuid[10],base_uuid[9],base_uuid[8],base_uuid[7],base_uuid[6],base_uuid[5],base_uuid[4],base_uuid[3],base_uuid[2],base_uuid[1],base_uuid[0]); } charsCount = service.getCharacteristicCount(); @@ -133,8 +132,7 @@ if(type==UUID::UUID_TYPE_LONG) { base_char_uuid = (p_char->getValueAttribute().getUUID()).getBaseUUID(); - COPY_UUID_128(char_base_uuid, base_char_uuid[15],base_char_uuid[14],base_char_uuid[13],base_char_uuid[12],base_char_uuid[11],base_char_uuid[10],base_char_uuid[9], - base_char_uuid[8],base_char_uuid[7],base_char_uuid[6],base_char_uuid[5],base_char_uuid[4],int_8_uuid[1],int_8_uuid[0],base_char_uuid[1],base_char_uuid[0]); + COPY_UUID_128(char_base_uuid,base_char_uuid[15],base_char_uuid[14],int_8_uuid[1],int_8_uuid[0],base_char_uuid[11],base_char_uuid[10],base_char_uuid[9],base_char_uuid[8],base_char_uuid[7],base_char_uuid[6],base_char_uuid[5],base_char_uuid[4],base_char_uuid[3],base_char_uuid[2],base_char_uuid[1],base_char_uuid[0]); } PRINTF("Char Properties 0x%x\n\r", p_char->getProperties()); @@ -333,9 +331,14 @@ ret = aci_gatt_update_char_value(bleCharHanldeMap.find(charHandle)->second, charHandle, 0, len, buffer); if (ret != BLE_STATUS_SUCCESS){ - PRINTF("Error while updating characteristic (ret=0x%x).\n\r", ret) ; - return BLE_ERROR_PARAM_OUT_OF_RANGE ; //Not correct Error Value - //FIXME: Define Error values equivalent to BlueNRG Error Codes. + PRINTF("Error while updating characteristic (ret=0x%x).\n\r", ret); + switch (ret) { + case BLE_STATUS_INVALID_HANDLE: + case BLE_STATUS_INVALID_PARAMETER: + return BLE_ERROR_INVALID_PARAM; + default: + return BLE_STACK_BUSY; + } } //Generate Data Sent Event Here? (GattServerEvents::GATT_EVENT_DATA_SENT) //FIXME: Is this correct?