BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: x-nucleo-idb0xa1/utils/Utils.h
- Revision:
- 226:be2f4e1d0515
- Parent:
- 144:bdf5e8432131
- Child:
- 242:058b2e731adc
--- a/x-nucleo-idb0xa1/utils/Utils.h Tue Apr 26 14:30:17 2016 +0200 +++ b/x-nucleo-idb0xa1/utils/Utils.h Tue Apr 26 14:32:13 2016 +0200 @@ -20,6 +20,7 @@ #ifndef __UTIL_H__ #define __UTIL_H__ +#include "ble_status.h" #include "hal_types.h" #include "mbed-drivers/mbed.h" @@ -40,7 +41,7 @@ }while(0) -double getHighPowerAndPALevelValue(int8_t dBMLevel, int8_t& EN_HIGH_POWER, int8_t& PA_LEVEL); +tBleStatus getHighPowerAndPALevelValue(int8_t dBMLevel, int8_t& EN_HIGH_POWER, int8_t& PA_LEVEL); #endif // __UTIL_H__