BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: x-nucleo-idb0xa1/bluenrg-hci/debug.h
- Branch:
- d59b3ff26ea2c44094a53ec9894b061ebe39e706
- Revision:
- 255:97adb68decd4
- Parent:
- 145:024a552e4715
--- a/x-nucleo-idb0xa1/bluenrg-hci/debug.h Thu Sep 15 10:51:17 2016 +0100 +++ b/x-nucleo-idb0xa1/bluenrg-hci/debug.h Thu Sep 15 10:51:17 2016 +0100 @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file debug.h + * @file debug.h * @author CL * @version V1.0.0 * @date 04-July-2014 @@ -41,7 +41,7 @@ #ifdef __cplusplus extern "C" { -#endif +#endif /* Includes ------------------------------------------------------------------*/ #include <string.h> @@ -56,7 +56,7 @@ #endif /* Print the data travelling over the SPI in the .csv format for the GUI*/ -//#define PRINT_CSV_FORMAT +//#define PRINT_CSV_FORMAT #ifdef PRINT_CSV_FORMAT #include <stdio.h> #define PRINT_CSV(...) printf(__VA_ARGS__) @@ -70,4 +70,4 @@ #endif /* __DEBUG_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ \ No newline at end of file