BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: x-nucleo-idb0xa1/utils/ble_utils.h
- Branch:
- c21998c9579e3c57e3e1619a977b9bc47a36d249
- Revision:
- 300:85b12e23a7ba
- Parent:
- 294:fd19310b086d
--- a/x-nucleo-idb0xa1/utils/ble_utils.h Thu Sep 15 10:52:07 2016 +0100 +++ b/x-nucleo-idb0xa1/utils/ble_utils.h Thu Sep 15 10:52:08 2016 +0100 @@ -22,11 +22,6 @@ #include "ble_status.h" #include "ble_hal_types.h" -#ifdef YOTTA_CFG_MBED_OS - #include "mbed-drivers/mbed.h" -#else - #include "mbed.h" -#endif #define STORE_LE_16(buf, val) ( ((buf)[0] = (uint8_t) (val) ) , \ ((buf)[1] = (uint8_t) (val>>8) ) )