ST / X_NUCLEO_IDB0XA1

BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)

Dependents:   Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more

Fork of X_NUCLEO_IDB0XA1 by ST Expansion SW Team

Arduino Connector Compatibility Warning

X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13 for the SPI clock, they use pin D3. The default configuration for this library is having the SPI clock on pin D3.

To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.

For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10 and instead soldering zero resistor R11. For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4 and instead soldering zero resistor R6.

In case you patch your board, then you also have to configure this library to use pin D13 to drive the SPI clock (see macro IDB0XA1_D13_PATCH in file x_nucleo_idb0xa1_targets.h).

If you use pin D13 for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13.

Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.

Diff: source/BlueNRGGap.cpp

Revision:
189:30fa96fa8ec4
Parent:
187:2e517d3ddd71
Child:
191:d22cc4715b0c
Child:
201:a9bc2e8b01d7
--- a/source/BlueNRGGap.cpp	Fri Nov 20 12:14:47 2015 +0100
+++ b/source/BlueNRGGap.cpp	Fri Nov 20 15:13:14 2015 +0100
@@ -134,13 +134,15 @@
                 }
             case GapAdvertisingData::INCOMPLETE_LIST_16BIT_SERVICE_IDS:  /**< Incomplete list of 16-bit Service IDs */
             case GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS:    /**< Complete list of 16-bit Service IDs */
+            case GapAdvertisingData::INCOMPLETE_LIST_128BIT_SERVICE_IDS: /**< Incomplete list of 128-bit Service IDs */
+            case GapAdvertisingData::COMPLETE_LIST_128BIT_SERVICE_IDS:   /**< Complete list of 128-bit Service IDs */
                 {
-                PRINTF("Advertising type: INCOMPLETE_LIST_16BIT_SERVICE_IDS/COMPLETE_LIST_16BIT_SERVICE_IDS\n\r");
+                PRINTF("Advertising type: INCOMPLETE_LIST SERVICE_IDS/COMPLETE_LIST SERVICE_IDS\n\r");
                 
                 uint8_t buffSize = *loadPtr.getUnitAtIndex(index).getLenPtr()-1;
                 // The total lenght should include the Data Type Value
                 if(buffSize>UUID_BUFFER_SIZE-1) {
-                    return BLE_ERROR_PARAM_OUT_OF_RANGE;
+                    return BLE_ERROR_INVALID_PARAM;
                 }
                 
                 servUuidlength = buffSize+1; // +1 to include the Data Type Value
@@ -149,7 +151,7 @@
                 PRINTF("servUuidlength=%d servUuidData[0]=%d buffSize=%d\n\r", servUuidlength, servUuidData[0], buffSize);
                 // Save the Service UUID list just after the Data Type Value field
                 memcpy(servUuidData+1, loadPtr.getUnitAtIndex(index).getDataPtr(), buffSize);
-                
+#ifdef DEBUG
                 for(unsigned i=0; i<servUuidlength; i++) {
                     PRINTF("servUuidData[%d] = 0x%x\n\r", i, servUuidData[i]);
                 }
@@ -157,7 +159,7 @@
                 for(unsigned i=0; i<buffSize; i++) {
                     PRINTF("loadPtr.getUnitAtIndex(index).getDataPtr()[%d] = 0x%x\n\r", i, loadPtr.getUnitAtIndex(index).getDataPtr()[i]);
                 }
-
+#endif /* DEBUG */
                 break;
                 }
             case GapAdvertisingData::INCOMPLETE_LIST_32BIT_SERVICE_IDS:  /**< Incomplete list of 32-bit Service IDs (not relevant for Bluetooth 4.0) */
@@ -170,16 +172,6 @@
                 PRINTF("Advertising type: COMPLETE_LIST_32BIT_SERVICE_IDS\n\r");
                 return BLE_ERROR_NOT_IMPLEMENTED;
                 }
-            case GapAdvertisingData::INCOMPLETE_LIST_128BIT_SERVICE_IDS: /**< Incomplete list of 128-bit Service IDs */
-                {
-                PRINTF("Advertising type: INCOMPLETE_LIST_128BIT_SERVICE_IDS\n\r");
-                return BLE_ERROR_NOT_IMPLEMENTED;
-                }
-            case GapAdvertisingData::COMPLETE_LIST_128BIT_SERVICE_IDS:   /**< Complete list of 128-bit Service IDs */
-                {
-                PRINTF("Advertising type: COMPLETE_LIST_128BIT_SERVICE_IDS\n\r");
-                return BLE_ERROR_NOT_IMPLEMENTED;
-                }
             case GapAdvertisingData::SHORTENED_LOCAL_NAME:               /**< Shortened Local Name */
                 {
                 break;