BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: x-nucleo-idb0xa1/BlueNRGGattServer.h
- Revision:
- 205:2b4afe8ce1a0
- Parent:
- 177:65d9b1b75fca
- Parent:
- 204:6a6d2f041905
- Child:
- 242:058b2e731adc
--- a/x-nucleo-idb0xa1/BlueNRGGattServer.h Thu Dec 03 11:37:55 2015 +0100 +++ b/x-nucleo-idb0xa1/BlueNRGGattServer.h Mon Dec 07 15:47:02 2015 +0100 @@ -70,8 +70,8 @@ /* Functions that must be implemented from GattServer */ // <<<ANDREA>>> virtual ble_error_t addService(GattService &); - virtual ble_error_t readValue(GattAttribute::Handle_t attributeHandle, uint8_t buffer[], uint16_t *lengthP); - virtual ble_error_t readValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t buffer[], uint16_t *lengthP); + virtual ble_error_t read(GattAttribute::Handle_t attributeHandle, uint8_t buffer[], uint16_t *lengthP); + virtual ble_error_t read(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t buffer[], uint16_t *lengthP); virtual ble_error_t write(GattAttribute::Handle_t, const uint8_t[], uint16_t, bool localOnly = false); virtual ble_error_t write(Gap::Handle_t connectionHandle, GattAttribute::Handle_t, const uint8_t[], uint16_t, bool localOnly = false); virtual ble_error_t initializeGATTDatabase(void);