BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: source/BlueNRGDevice.cpp
- Branch:
- e9fb3e390284c3f7ef8e1d21cc55deef7558ca3d
- Revision:
- 264:1e754a01869e
- Parent:
- 253:9665a6f8bbdb
- Child:
- 273:00205952d841
--- a/source/BlueNRGDevice.cpp Thu Sep 15 10:51:17 2016 +0100 +++ b/source/BlueNRGDevice.cpp Thu Sep 15 10:51:26 2016 +0100 @@ -229,9 +229,7 @@ bool must_return = false; do { - BlueNRGGap::getInstance().Process(); - - HCI_Process(); + bluenrgDeviceInstance.processEvents(); if(must_return) return; @@ -469,3 +467,7 @@ { irq_.enable_irq(); } + +void BlueNRGDevice::processEvents() { + btle_handler(); +} \ No newline at end of file