BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: x-nucleo-idb0xa1/bluenrg-hci/ble_hci_const.h
- Branch:
- 827fca974a672c59ad43e225f38d1f0c66c46af8
- Revision:
- 285:0e1570840658
- Parent:
- 280:fbee0e3444be
--- a/x-nucleo-idb0xa1/bluenrg-hci/ble_hci_const.h Thu Sep 15 10:51:51 2016 +0100 +++ b/x-nucleo-idb0xa1/bluenrg-hci/ble_hci_const.h Thu Sep 15 10:51:52 2016 +0100 @@ -10,11 +10,11 @@ #ifndef __HCI_INTERNAL_H_ #define __HCI_INTERNAL_H_ -#include "compiler.h" -#include "hal_types.h" -#include "clock.h" -#include "link_layer.h" -#include "hci.h" +#include "ble_compiler.h" +#include "ble_hal_types.h" +#include "ble_clock.h" +#include "ble_link_layer.h" +#include "ble_hci.h" #define DEFAULT_TIMEOUT (CLOCK_SECOND/10) @@ -560,4 +560,4 @@ int hci_send_req(struct hci_request *r, BOOL async); -#endif /* __HCI_INTERNAL_H_ */ +#endif /* __HCI_INTERNAL_H_ */ \ No newline at end of file