BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
x-nucleo-idb0xa1/utils/ble_utils.h@307:fa98703ece8e, 2016-09-16 (annotated)
- Committer:
- Andrea Palmieri
- Date:
- Fri Sep 16 12:03:25 2016 +0200
- Revision:
- 307:fa98703ece8e
- Parent:
- 300:85b12e23a7ba
Sync with 21bfd161ace255bb6214d6b74cae1fd30b3e24c9
2016-09-16 11:53:47+02:00: Andrea Palmieri
Get rid of warnings
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Wolfgang Betz |
132:51056160fa4a | 1 | /* mbed Microcontroller Library |
Wolfgang Betz |
132:51056160fa4a | 2 | * Copyright (c) 2006-2013 ARM Limited |
Wolfgang Betz |
132:51056160fa4a | 3 | * |
Wolfgang Betz |
132:51056160fa4a | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
Wolfgang Betz |
132:51056160fa4a | 5 | * you may not use this file except in compliance with the License. |
Wolfgang Betz |
132:51056160fa4a | 6 | * You may obtain a copy of the License at |
Wolfgang Betz |
132:51056160fa4a | 7 | * |
Wolfgang Betz |
132:51056160fa4a | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
Wolfgang Betz |
132:51056160fa4a | 9 | * |
Wolfgang Betz |
132:51056160fa4a | 10 | * Unless required by applicable law or agreed to in writing, software |
Wolfgang Betz |
132:51056160fa4a | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
Wolfgang Betz |
132:51056160fa4a | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
Wolfgang Betz |
132:51056160fa4a | 13 | * See the License for the specific language governing permissions and |
Wolfgang Betz |
132:51056160fa4a | 14 | * limitations under the License. |
Wolfgang Betz |
132:51056160fa4a | 15 | */ |
Wolfgang Betz |
132:51056160fa4a | 16 | |
Wolfgang Betz |
132:51056160fa4a | 17 | |
Wolfgang Betz |
132:51056160fa4a | 18 | // utility functions |
Wolfgang Betz |
132:51056160fa4a | 19 | |
Wolfgang Betz |
132:51056160fa4a | 20 | #ifndef __UTIL_H__ |
Wolfgang Betz |
132:51056160fa4a | 21 | #define __UTIL_H__ |
Wolfgang Betz |
132:51056160fa4a | 22 | |
Andrea Palmieri |
226:be2f4e1d0515 | 23 | #include "ble_status.h" |
Vincent Coubard |
294:fd19310b086d | 24 | #include "ble_hal_types.h" |
Wolfgang Betz |
132:51056160fa4a | 25 | |
Wolfgang Betz |
132:51056160fa4a | 26 | #define STORE_LE_16(buf, val) ( ((buf)[0] = (uint8_t) (val) ) , \ |
Wolfgang Betz |
132:51056160fa4a | 27 | ((buf)[1] = (uint8_t) (val>>8) ) ) |
Wolfgang Betz |
132:51056160fa4a | 28 | |
Wolfgang Betz |
132:51056160fa4a | 29 | #define STORE_LE_32(buf, val) ( ((buf)[0] = (uint8_t) (val) ) , \ |
Wolfgang Betz |
132:51056160fa4a | 30 | ((buf)[1] = (uint8_t) (val>>8) ) , \ |
Wolfgang Betz |
132:51056160fa4a | 31 | ((buf)[2] = (uint8_t) (val>>16) ) , \ |
Wolfgang Betz |
132:51056160fa4a | 32 | ((buf)[3] = (uint8_t) (val>>24) ) ) |
Wolfgang Betz |
132:51056160fa4a | 33 | |
Wolfgang Betz |
132:51056160fa4a | 34 | #define COPY_UUID_128(uuid_struct, uuid_15, uuid_14, uuid_13, uuid_12, uuid_11, uuid_10, uuid_9, uuid_8, uuid_7, uuid_6, uuid_5, uuid_4, uuid_3, uuid_2, uuid_1, uuid_0) \ |
Wolfgang Betz |
132:51056160fa4a | 35 | do {\ |
Wolfgang Betz |
132:51056160fa4a | 36 | uuid_struct[0] = uuid_0; uuid_struct[1] = uuid_1; uuid_struct[2] = uuid_2; uuid_struct[3] = uuid_3; \ |
Wolfgang Betz |
132:51056160fa4a | 37 | uuid_struct[4] = uuid_4; uuid_struct[5] = uuid_5; uuid_struct[6] = uuid_6; uuid_struct[7] = uuid_7; \ |
Wolfgang Betz |
132:51056160fa4a | 38 | uuid_struct[8] = uuid_8; uuid_struct[9] = uuid_9; uuid_struct[10] = uuid_10; uuid_struct[11] = uuid_11; \ |
Wolfgang Betz |
132:51056160fa4a | 39 | uuid_struct[12] = uuid_12; uuid_struct[13] = uuid_13; uuid_struct[14] = uuid_14; uuid_struct[15] = uuid_15; \ |
Wolfgang Betz |
132:51056160fa4a | 40 | }while(0) |
Wolfgang Betz |
132:51056160fa4a | 41 | |
Wolfgang Betz |
132:51056160fa4a | 42 | |
Andrea Palmieri |
226:be2f4e1d0515 | 43 | tBleStatus getHighPowerAndPALevelValue(int8_t dBMLevel, int8_t& EN_HIGH_POWER, int8_t& PA_LEVEL); |
Wolfgang Betz |
132:51056160fa4a | 44 | |
Wolfgang Betz |
132:51056160fa4a | 45 | #endif // __UTIL_H__ |
Vincent Coubard |
278:a5209d8cfd61 | 46 |