BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
x-nucleo-idb0xa1/bluenrg-hci/ble_clock.h@307:fa98703ece8e, 2016-09-16 (annotated)
- Committer:
- Andrea Palmieri
- Date:
- Fri Sep 16 12:03:25 2016 +0200
- Revision:
- 307:fa98703ece8e
- Parent:
- 297:c26445716704
Sync with 21bfd161ace255bb6214d6b74cae1fd30b3e24c9
2016-09-16 11:53:47+02:00: Andrea Palmieri
Get rid of warnings
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Wolfgang Betz |
132:51056160fa4a | 1 | /******************** (C) COPYRIGHT 2012 STMicroelectronics ******************** |
Vincent Coubard |
297:c26445716704 | 2 | * File Name : ble_clock.h |
Wolfgang Betz |
132:51056160fa4a | 3 | * Author : AMS - HEA&RF BU |
Wolfgang Betz |
132:51056160fa4a | 4 | * Version : V1.0.1 |
Wolfgang Betz |
132:51056160fa4a | 5 | * Date : 19-July-2012 |
Wolfgang Betz |
132:51056160fa4a | 6 | * Description : Header file for clock library, that gives a simple time |
Wolfgang Betz |
132:51056160fa4a | 7 | * reference to the BLE Stack. |
Wolfgang Betz |
132:51056160fa4a | 8 | ******************************************************************************** |
Wolfgang Betz |
132:51056160fa4a | 9 | * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS |
Wolfgang Betz |
132:51056160fa4a | 10 | * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. |
Wolfgang Betz |
132:51056160fa4a | 11 | * AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, |
Wolfgang Betz |
132:51056160fa4a | 12 | * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE |
Wolfgang Betz |
132:51056160fa4a | 13 | * CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING |
Wolfgang Betz |
132:51056160fa4a | 14 | * INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. |
Wolfgang Betz |
132:51056160fa4a | 15 | *******************************************************************************/ |
Wolfgang Betz |
132:51056160fa4a | 16 | |
Wolfgang Betz |
132:51056160fa4a | 17 | #ifndef __CLOCK_H__ |
Wolfgang Betz |
132:51056160fa4a | 18 | #define __CLOCK_H__ |
Wolfgang Betz |
132:51056160fa4a | 19 | |
Vincent Coubard |
286:fb0d75790322 | 20 | #include <ble_hal_types.h> |
Wolfgang Betz |
132:51056160fa4a | 21 | |
Wolfgang Betz |
132:51056160fa4a | 22 | /** |
Wolfgang Betz |
132:51056160fa4a | 23 | * Number of clocks in one seconds. |
Wolfgang Betz |
132:51056160fa4a | 24 | * This value must be set by each platorm implementation, basing on its needs. |
Wolfgang Betz |
132:51056160fa4a | 25 | */ |
Wolfgang Betz |
132:51056160fa4a | 26 | extern const uint32_t CLOCK_SECOND; |
Wolfgang Betz |
132:51056160fa4a | 27 | |
Wolfgang Betz |
132:51056160fa4a | 28 | typedef uint32_t tClockTime; |
Wolfgang Betz |
132:51056160fa4a | 29 | |
Wolfgang Betz |
132:51056160fa4a | 30 | /** |
Wolfgang Betz |
132:51056160fa4a | 31 | * This function initializes the clock library and should be called before |
Wolfgang Betz |
132:51056160fa4a | 32 | * any other Stack functions. |
Wolfgang Betz |
132:51056160fa4a | 33 | * |
Wolfgang Betz |
132:51056160fa4a | 34 | */ |
Wolfgang Betz |
132:51056160fa4a | 35 | void Clock_Init(void); |
Wolfgang Betz |
132:51056160fa4a | 36 | |
Wolfgang Betz |
132:51056160fa4a | 37 | /** |
Wolfgang Betz |
132:51056160fa4a | 38 | * This function returns the current system clock time. it is used by |
Wolfgang Betz |
132:51056160fa4a | 39 | * the host stack and has to be implemented. |
Wolfgang Betz |
132:51056160fa4a | 40 | * |
Wolfgang Betz |
132:51056160fa4a | 41 | * @return The current clock time, measured in system ticks. |
Wolfgang Betz |
132:51056160fa4a | 42 | */ |
Wolfgang Betz |
132:51056160fa4a | 43 | tClockTime Clock_Time(void); |
Wolfgang Betz |
132:51056160fa4a | 44 | |
Wolfgang Betz |
132:51056160fa4a | 45 | /** |
Wolfgang Betz |
132:51056160fa4a | 46 | * This function waits for a given number of milliseconds. |
Wolfgang Betz |
132:51056160fa4a | 47 | * |
Wolfgang Betz |
132:51056160fa4a | 48 | */ |
Wolfgang Betz |
132:51056160fa4a | 49 | void Clock_Wait(uint32_t i); |
Wolfgang Betz |
132:51056160fa4a | 50 | |
Wolfgang Betz |
132:51056160fa4a | 51 | /** |
Wolfgang Betz |
132:51056160fa4a | 52 | * It suspends system clock. |
Wolfgang Betz |
132:51056160fa4a | 53 | * |
Wolfgang Betz |
132:51056160fa4a | 54 | */ |
Wolfgang Betz |
132:51056160fa4a | 55 | void Clock_Suspend(void); |
Wolfgang Betz |
132:51056160fa4a | 56 | |
Wolfgang Betz |
132:51056160fa4a | 57 | |
Wolfgang Betz |
132:51056160fa4a | 58 | #endif /* __CLOCK_H__ */ |