ST / X_NUCLEO_IDB0XA1

BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)

Dependents:   Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more

Fork of X_NUCLEO_IDB0XA1 by ST Expansion SW Team

Arduino Connector Compatibility Warning

X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13 for the SPI clock, they use pin D3. The default configuration for this library is having the SPI clock on pin D3.

To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.

For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10 and instead soldering zero resistor R11. For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4 and instead soldering zero resistor R6.

In case you patch your board, then you also have to configure this library to use pin D13 to drive the SPI clock (see macro IDB0XA1_D13_PATCH in file x_nucleo_idb0xa1_targets.h).

If you use pin D13 for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13.

Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.

source/BlueNRGDevice.cpp@139:3a75965fd389, 2015-10-08 (annotated)

Committer:
Wolfgang Betz
Date:
Thu Oct 08 08:47:20 2015 +0200
Revision:
139:3a75965fd389
Parent:
132:51056160fa4a
Child:
144:bdf5e8432131
Manually merge modifications as suggested from Rohit & Andrea in Andrea's mail of 10/07/2015 04:20 PM



From: Andrea PALMIERI <andrea.palmieri@st.com>

To: Rohit Grover <rohit.grover@arm.com>, Wolfgang BETZ <wolfgang.betz@st.com>,

	Antonio VILEI <antonio.vilei@st.com>, Mihail Stoyanov

	<Mihail.Stoyanov@arm.com>

CC: Nicola CAPOVILLA <nicola.capovilla@st.com>, Silvio Lucio OLIVA

	<silvio.oliva@st.com>, "jonathan.austin@arm.com" <jonathan.austin@arm.com>

Content-Class: urn:content-classes:message

Date: Wed, 7 Oct 2015 16:20:29 +0200

Subject: RE: Arduino Compatibility of X-NUCLEO-IDB04A1

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Wolfgang Betz 130:770ce14d3d15 1 /* mbed Microcontroller Library
Wolfgang Betz 130:770ce14d3d15 2 * Copyright (c) 2006-2013 ARM Limited
Wolfgang Betz 130:770ce14d3d15 3 *
Wolfgang Betz 130:770ce14d3d15 4 * Licensed under the Apache License, Version 2.0 (the "License");
Wolfgang Betz 130:770ce14d3d15 5 * you may not use this file except in compliance with the License.
Wolfgang Betz 130:770ce14d3d15 6 * You may obtain a copy of the License at
Wolfgang Betz 130:770ce14d3d15 7 *
Wolfgang Betz 130:770ce14d3d15 8 * http://www.apache.org/licenses/LICENSE-2.0
Wolfgang Betz 130:770ce14d3d15 9 *
Wolfgang Betz 130:770ce14d3d15 10 * Unless required by applicable law or agreed to in writing, software
Wolfgang Betz 130:770ce14d3d15 11 * distributed under the License is distributed on an "AS IS" BASIS,
Wolfgang Betz 130:770ce14d3d15 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
Wolfgang Betz 130:770ce14d3d15 13 * See the License for the specific language governing permissions and
Wolfgang Betz 130:770ce14d3d15 14 * limitations under the License.
Wolfgang Betz 130:770ce14d3d15 15 */
Wolfgang Betz 130:770ce14d3d15 16
Wolfgang Betz 130:770ce14d3d15 17 /**
Wolfgang Betz 130:770ce14d3d15 18 ******************************************************************************
Wolfgang Betz 130:770ce14d3d15 19 * @file BlueNRGDevice.cpp
Wolfgang Betz 130:770ce14d3d15 20 * @author STMicroelectronics
Wolfgang Betz 130:770ce14d3d15 21 * @brief Implementation of BLEDeviceInstanceBase
Wolfgang Betz 130:770ce14d3d15 22 ******************************************************************************
Wolfgang Betz 130:770ce14d3d15 23 * @copy
Wolfgang Betz 130:770ce14d3d15 24 *
Wolfgang Betz 130:770ce14d3d15 25 * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
Wolfgang Betz 130:770ce14d3d15 26 * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
Wolfgang Betz 130:770ce14d3d15 27 * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
Wolfgang Betz 130:770ce14d3d15 28 * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
Wolfgang Betz 130:770ce14d3d15 29 * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
Wolfgang Betz 130:770ce14d3d15 30 * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
Wolfgang Betz 130:770ce14d3d15 31 *
Wolfgang Betz 130:770ce14d3d15 32 * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
Wolfgang Betz 130:770ce14d3d15 33 */
Wolfgang Betz 130:770ce14d3d15 34
Wolfgang Betz 130:770ce14d3d15 35 /** @defgroup BlueNRGDevice
Wolfgang Betz 130:770ce14d3d15 36 * @brief BlueNRG BLE_API Device Adaptation
Wolfgang Betz 130:770ce14d3d15 37 * @{
Wolfgang Betz 130:770ce14d3d15 38 */
Wolfgang Betz 130:770ce14d3d15 39
Wolfgang Betz 130:770ce14d3d15 40 #include "mbed.h"
Wolfgang Betz 130:770ce14d3d15 41 #include "BlueNRGDevice.h"
Wolfgang Betz 130:770ce14d3d15 42 #include "BlueNRGGap.h"
Wolfgang Betz 130:770ce14d3d15 43 #include "BlueNRGGattServer.h"
Wolfgang Betz 130:770ce14d3d15 44
Wolfgang Betz 130:770ce14d3d15 45 #include "btle.h"
Wolfgang Betz 130:770ce14d3d15 46 #include "Utils.h"
Wolfgang Betz 130:770ce14d3d15 47 #include "osal.h"
Wolfgang Betz 130:770ce14d3d15 48
Wolfgang Betz 130:770ce14d3d15 49 #include "debug.h"
Wolfgang Betz 130:770ce14d3d15 50 #include "stm32_bluenrg_ble.h"
Wolfgang Betz 130:770ce14d3d15 51
Wolfgang Betz 130:770ce14d3d15 52 extern "C" {
Wolfgang Betz 130:770ce14d3d15 53 #include "hci.h"
Wolfgang Betz 130:770ce14d3d15 54 }
Wolfgang Betz 130:770ce14d3d15 55
Wolfgang Betz 130:770ce14d3d15 56 #define HEADER_SIZE 5
Wolfgang Betz 130:770ce14d3d15 57 #define MAX_BUFFER_SIZE 255
Wolfgang Betz 130:770ce14d3d15 58
Wolfgang Betz 130:770ce14d3d15 59 /**
Wolfgang Betz 130:770ce14d3d15 60 * The singleton which represents the BlueNRG transport for the BLEDevice.
Wolfgang Betz 130:770ce14d3d15 61 *
Wolfgang Betz 130:770ce14d3d15 62 * See file 'x_nucleo_idb0xa1_targets.h' for details regarding the peripheral pins used!
Wolfgang Betz 130:770ce14d3d15 63 */
Wolfgang Betz 130:770ce14d3d15 64 #include "x_nucleo_idb0xa1_targets.h"
Wolfgang Betz 130:770ce14d3d15 65
Wolfgang Betz 130:770ce14d3d15 66 BlueNRGDevice bluenrgDeviceInstance(IDB0XA1_PIN_SPI_MOSI,
Wolfgang Betz 130:770ce14d3d15 67 IDB0XA1_PIN_SPI_MISO,
Wolfgang Betz 130:770ce14d3d15 68 IDB0XA1_PIN_SPI_SCK,
Wolfgang Betz 130:770ce14d3d15 69 IDB0XA1_PIN_SPI_nCS,
Wolfgang Betz 130:770ce14d3d15 70 IDB0XA1_PIN_SPI_RESET,
Wolfgang Betz 130:770ce14d3d15 71 IDB0XA1_PIN_SPI_IRQ);
Wolfgang Betz 130:770ce14d3d15 72
Wolfgang Betz 130:770ce14d3d15 73 /**
Wolfgang Betz 130:770ce14d3d15 74 * BLE-API requires an implementation of the following function in order to
Wolfgang Betz 130:770ce14d3d15 75 * obtain its transport handle.
Wolfgang Betz 130:770ce14d3d15 76 */
Wolfgang Betz 130:770ce14d3d15 77 BLEInstanceBase *
Wolfgang Betz 130:770ce14d3d15 78 createBLEInstance(void)
Wolfgang Betz 130:770ce14d3d15 79 {
Wolfgang Betz 130:770ce14d3d15 80 return (&bluenrgDeviceInstance);
Wolfgang Betz 130:770ce14d3d15 81 }
Wolfgang Betz 130:770ce14d3d15 82
Wolfgang Betz 130:770ce14d3d15 83 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 84 /**
Wolfgang Betz 130:770ce14d3d15 85 @brief Constructor
Wolfgang Betz 130:770ce14d3d15 86 * @param mosi mbed pin to use for MOSI line of SPI interface
Wolfgang Betz 130:770ce14d3d15 87 * @param miso mbed pin to use for MISO line of SPI interface
Wolfgang Betz 130:770ce14d3d15 88 * @param sck mbed pin to use for SCK line of SPI interface
Wolfgang Betz 130:770ce14d3d15 89 * @param cs mbed pin to use for not chip select line of SPI interface
Wolfgang Betz 130:770ce14d3d15 90 * @param rst mbed pin to use for BlueNRG reset
Wolfgang Betz 130:770ce14d3d15 91 * @param irq mbed pin for BlueNRG IRQ
Wolfgang Betz 130:770ce14d3d15 92 */
Wolfgang Betz 130:770ce14d3d15 93 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 94 BlueNRGDevice::BlueNRGDevice(PinName mosi,
Wolfgang Betz 130:770ce14d3d15 95 PinName miso,
Wolfgang Betz 130:770ce14d3d15 96 PinName sck,
Wolfgang Betz 130:770ce14d3d15 97 PinName cs,
Wolfgang Betz 130:770ce14d3d15 98 PinName rst,
Wolfgang Betz 130:770ce14d3d15 99 PinName irq) : spi_(mosi, miso, sck), nCS_(cs), rst_(rst), irq_(irq)
Wolfgang Betz 130:770ce14d3d15 100 {
Wolfgang Betz 130:770ce14d3d15 101 isInitialized = false;
Wolfgang Betz 130:770ce14d3d15 102
Wolfgang Betz 130:770ce14d3d15 103 // Setup the spi for 8 bit data, low clock polarity,
Wolfgang Betz 130:770ce14d3d15 104 // 1-edge phase, with an 8MHz clock rate
Wolfgang Betz 130:770ce14d3d15 105 spi_.format(8, 0);
Wolfgang Betz 130:770ce14d3d15 106 spi_.frequency(8000000);
Wolfgang Betz 130:770ce14d3d15 107
Wolfgang Betz 130:770ce14d3d15 108 // Deselect the BlueNRG chip by keeping its nCS signal high
Wolfgang Betz 130:770ce14d3d15 109 nCS_ = 1;
Wolfgang Betz 130:770ce14d3d15 110
Wolfgang Betz 130:770ce14d3d15 111 wait_us(500);
Wolfgang Betz 130:770ce14d3d15 112 }
Wolfgang Betz 130:770ce14d3d15 113
Wolfgang Betz 130:770ce14d3d15 114 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 115 /**
Wolfgang Betz 130:770ce14d3d15 116 @brief Destructor
Wolfgang Betz 130:770ce14d3d15 117 */
Wolfgang Betz 130:770ce14d3d15 118 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 119 BlueNRGDevice::~BlueNRGDevice(void)
Wolfgang Betz 130:770ce14d3d15 120 {
Wolfgang Betz 130:770ce14d3d15 121 }
Wolfgang Betz 130:770ce14d3d15 122
Wolfgang Betz 130:770ce14d3d15 123
Wolfgang Betz 130:770ce14d3d15 124 /**
Wolfgang Betz 130:770ce14d3d15 125 @brief Initialises anything required to start using BLE
Wolfgang Betz 130:770ce14d3d15 126 @param[in] void
Wolfgang Betz 130:770ce14d3d15 127 @returns ble_error_t
Wolfgang Betz 130:770ce14d3d15 128 */
Wolfgang Betz 130:770ce14d3d15 129 ble_error_t BlueNRGDevice::init(void)
Wolfgang Betz 130:770ce14d3d15 130 {
Wolfgang Betz 130:770ce14d3d15 131 // Set the interrupt handler for the device
Wolfgang Betz 130:770ce14d3d15 132 irq_.mode(PullNone); // betzw: set irq mode
Wolfgang Betz 130:770ce14d3d15 133 irq_.rise(&HCI_Isr);
Wolfgang Betz 130:770ce14d3d15 134
Wolfgang Betz 130:770ce14d3d15 135 /* ToDo: Clear memory contents, reset the SD, etc. */
Wolfgang Betz 132:51056160fa4a 136 // By default, we set the device GAP role to PERIPHERAL
Wolfgang Betz 132:51056160fa4a 137 btle_init(BlueNRGGap::getInstance().getIsSetAddress(), GAP_PERIPHERAL_ROLE_IDB04A1);
Wolfgang Betz 130:770ce14d3d15 138
Wolfgang Betz 130:770ce14d3d15 139 isInitialized = true;
Wolfgang Betz 130:770ce14d3d15 140
Wolfgang Betz 130:770ce14d3d15 141 return BLE_ERROR_NONE;
Wolfgang Betz 130:770ce14d3d15 142 }
Wolfgang Betz 130:770ce14d3d15 143
Wolfgang Betz 130:770ce14d3d15 144
Wolfgang Betz 130:770ce14d3d15 145 /**
Wolfgang Betz 130:770ce14d3d15 146 @brief Resets the BLE HW, removing any existing services and
Wolfgang Betz 130:770ce14d3d15 147 characteristics
Wolfgang Betz 130:770ce14d3d15 148 @param[in] void
Wolfgang Betz 130:770ce14d3d15 149 @returns ble_error_t
Wolfgang Betz 130:770ce14d3d15 150 */
Wolfgang Betz 130:770ce14d3d15 151 ble_error_t BlueNRGDevice::reset(void)
Wolfgang Betz 130:770ce14d3d15 152 {
Wolfgang Betz 130:770ce14d3d15 153 wait_us(500);
Wolfgang Betz 130:770ce14d3d15 154
Wolfgang Betz 130:770ce14d3d15 155 /* Reset BlueNRG SPI interface */
Wolfgang Betz 130:770ce14d3d15 156 rst_ = 0;
Wolfgang Betz 130:770ce14d3d15 157 wait_us(5);
Wolfgang Betz 130:770ce14d3d15 158 rst_ = 1;
Wolfgang Betz 130:770ce14d3d15 159 wait_us(5);
Wolfgang Betz 130:770ce14d3d15 160
Wolfgang Betz 130:770ce14d3d15 161 /* Wait for the radio to come back up */
Wolfgang Betz 130:770ce14d3d15 162 wait_us(500);
Wolfgang Betz 130:770ce14d3d15 163
Wolfgang Betz 130:770ce14d3d15 164 isInitialized = false;
Wolfgang Betz 130:770ce14d3d15 165
Wolfgang Betz 130:770ce14d3d15 166 return BLE_ERROR_NONE;
Wolfgang Betz 130:770ce14d3d15 167 }
Wolfgang Betz 130:770ce14d3d15 168
Wolfgang Betz 139:3a75965fd389 169 // ANDREA: mbedOS
Wolfgang Betz 139:3a75965fd389 170 // betzw: really?
Wolfgang Betz 130:770ce14d3d15 171 /*!
Wolfgang Betz 130:770ce14d3d15 172 @brief Wait for any BLE Event like BLE Connection, Read Request etc.
Wolfgang Betz 130:770ce14d3d15 173 @param[in] void
Wolfgang Betz 130:770ce14d3d15 174 @returns char *
Wolfgang Betz 130:770ce14d3d15 175 */
Wolfgang Betz 130:770ce14d3d15 176 void BlueNRGDevice::waitForEvent(void)
Wolfgang Betz 130:770ce14d3d15 177 {
Wolfgang Betz 130:770ce14d3d15 178 bool must_return = false;
Wolfgang Betz 130:770ce14d3d15 179
Wolfgang Betz 130:770ce14d3d15 180 do {
Wolfgang Betz 130:770ce14d3d15 181 BlueNRGGap::getInstance().Process();
Wolfgang Betz 130:770ce14d3d15 182
Wolfgang Betz 130:770ce14d3d15 183 HCI_Process();
Wolfgang Betz 130:770ce14d3d15 184
Wolfgang Betz 130:770ce14d3d15 185 if(must_return) return;
Wolfgang Betz 130:770ce14d3d15 186
Wolfgang Betz 130:770ce14d3d15 187 __WFE(); /* it is recommended that SEVONPEND in the
Wolfgang Betz 130:770ce14d3d15 188 System Control Register is NOT set */
Wolfgang Betz 130:770ce14d3d15 189 must_return = true; /* after returning from WFE we must guarantee
Wolfgang Betz 130:770ce14d3d15 190 that conrol is given back to main loop before next WFE */
Wolfgang Betz 130:770ce14d3d15 191 } while(true);
Wolfgang Betz 130:770ce14d3d15 192
Wolfgang Betz 139:3a75965fd389 193 }
Wolfgang Betz 130:770ce14d3d15 194
Wolfgang Betz 130:770ce14d3d15 195 /*!
Wolfgang Betz 130:770ce14d3d15 196 @brief get GAP version
Wolfgang Betz 130:770ce14d3d15 197 @param[in] void
Wolfgang Betz 130:770ce14d3d15 198 @returns char *
Wolfgang Betz 130:770ce14d3d15 199 */
Wolfgang Betz 130:770ce14d3d15 200 const char *BlueNRGDevice::getVersion(void)
Wolfgang Betz 130:770ce14d3d15 201 {
Wolfgang Betz 130:770ce14d3d15 202 char *version = new char[6];
Wolfgang Betz 130:770ce14d3d15 203 memcpy((void *)version, "1.0.0", 5);
Wolfgang Betz 130:770ce14d3d15 204 return version;
Wolfgang Betz 130:770ce14d3d15 205 }
Wolfgang Betz 130:770ce14d3d15 206
Wolfgang Betz 130:770ce14d3d15 207 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 208 /*!
Wolfgang Betz 130:770ce14d3d15 209 @brief get init state
Wolfgang Betz 130:770ce14d3d15 210 @param[in] void
Wolfgang Betz 130:770ce14d3d15 211 @returns bool
Wolfgang Betz 130:770ce14d3d15 212 */
Wolfgang Betz 130:770ce14d3d15 213 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 214 bool BlueNRGDevice::getIsInitialized(void)
Wolfgang Betz 130:770ce14d3d15 215 {
Wolfgang Betz 130:770ce14d3d15 216 return isInitialized;
Wolfgang Betz 130:770ce14d3d15 217 }
Wolfgang Betz 130:770ce14d3d15 218
Wolfgang Betz 130:770ce14d3d15 219 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 220 /*!
Wolfgang Betz 130:770ce14d3d15 221 @brief get reference to GAP object
Wolfgang Betz 130:770ce14d3d15 222 @param[in] void
Wolfgang Betz 130:770ce14d3d15 223 @returns Gap&
Wolfgang Betz 130:770ce14d3d15 224 */
Wolfgang Betz 130:770ce14d3d15 225 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 226 Gap &BlueNRGDevice::getGap()
Wolfgang Betz 130:770ce14d3d15 227 {
Wolfgang Betz 130:770ce14d3d15 228 return BlueNRGGap::getInstance();
Wolfgang Betz 130:770ce14d3d15 229 }
Wolfgang Betz 130:770ce14d3d15 230
Wolfgang Betz 130:770ce14d3d15 231 const Gap &BlueNRGDevice::getGap() const
Wolfgang Betz 130:770ce14d3d15 232 {
Wolfgang Betz 130:770ce14d3d15 233 return BlueNRGGap::getInstance();
Wolfgang Betz 130:770ce14d3d15 234 }
Wolfgang Betz 130:770ce14d3d15 235
Wolfgang Betz 130:770ce14d3d15 236 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 237 /*!
Wolfgang Betz 130:770ce14d3d15 238 @brief get reference to GATT server object
Wolfgang Betz 130:770ce14d3d15 239 @param[in] void
Wolfgang Betz 130:770ce14d3d15 240 @returns GattServer&
Wolfgang Betz 130:770ce14d3d15 241 */
Wolfgang Betz 130:770ce14d3d15 242 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 243 GattServer &BlueNRGDevice::getGattServer()
Wolfgang Betz 130:770ce14d3d15 244 {
Wolfgang Betz 130:770ce14d3d15 245 return BlueNRGGattServer::getInstance();
Wolfgang Betz 130:770ce14d3d15 246 }
Wolfgang Betz 130:770ce14d3d15 247
Wolfgang Betz 130:770ce14d3d15 248 const GattServer &BlueNRGDevice::getGattServer() const
Wolfgang Betz 130:770ce14d3d15 249 {
Wolfgang Betz 130:770ce14d3d15 250 return BlueNRGGattServer::getInstance();
Wolfgang Betz 130:770ce14d3d15 251 }
Wolfgang Betz 130:770ce14d3d15 252
Wolfgang Betz 130:770ce14d3d15 253 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 254 /*!
Wolfgang Betz 130:770ce14d3d15 255 @brief shut down the the BLE device
Wolfgang Betz 130:770ce14d3d15 256 @param[out] error if any
Wolfgang Betz 130:770ce14d3d15 257 */
Wolfgang Betz 130:770ce14d3d15 258 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 259 ble_error_t BlueNRGDevice::shutdown(void) {
Wolfgang Betz 130:770ce14d3d15 260 return reset();
Wolfgang Betz 130:770ce14d3d15 261 }
Wolfgang Betz 130:770ce14d3d15 262
Wolfgang Betz 130:770ce14d3d15 263 /**
Wolfgang Betz 130:770ce14d3d15 264 * @brief Reads from BlueNRG SPI buffer and store data into local buffer.
Wolfgang Betz 130:770ce14d3d15 265 * @param buffer : Buffer where data from SPI are stored
Wolfgang Betz 130:770ce14d3d15 266 * @param buff_size: Buffer size
Wolfgang Betz 130:770ce14d3d15 267 * @retval int32_t : Number of read bytes
Wolfgang Betz 130:770ce14d3d15 268 */
Wolfgang Betz 130:770ce14d3d15 269 int32_t BlueNRGDevice::spiRead(uint8_t *buffer, uint8_t buff_size)
Wolfgang Betz 130:770ce14d3d15 270 {
Wolfgang Betz 130:770ce14d3d15 271 uint16_t byte_count;
Wolfgang Betz 130:770ce14d3d15 272 uint8_t len = 0;
Wolfgang Betz 130:770ce14d3d15 273 uint8_t char_ff = 0xff;
Wolfgang Betz 130:770ce14d3d15 274 volatile uint8_t read_char;
Wolfgang Betz 130:770ce14d3d15 275
Wolfgang Betz 130:770ce14d3d15 276 uint8_t i = 0;
Wolfgang Betz 130:770ce14d3d15 277 volatile uint8_t tmpreg;
Wolfgang Betz 130:770ce14d3d15 278
Wolfgang Betz 130:770ce14d3d15 279 uint8_t header_master[HEADER_SIZE] = {0x0b, 0x00, 0x00, 0x00, 0x00};
Wolfgang Betz 130:770ce14d3d15 280 uint8_t header_slave[HEADER_SIZE];
Wolfgang Betz 130:770ce14d3d15 281
Wolfgang Betz 130:770ce14d3d15 282 /* Select the chip */
Wolfgang Betz 130:770ce14d3d15 283 nCS_ = 0;
Wolfgang Betz 130:770ce14d3d15 284
Wolfgang Betz 130:770ce14d3d15 285 /* Read the header */
Wolfgang Betz 130:770ce14d3d15 286 for (i = 0; i < 5; i++)
Wolfgang Betz 130:770ce14d3d15 287 {
Wolfgang Betz 130:770ce14d3d15 288 tmpreg = spi_.write(header_master[i]);
Wolfgang Betz 130:770ce14d3d15 289 header_slave[i] = (uint8_t)(tmpreg);
Wolfgang Betz 130:770ce14d3d15 290 }
Wolfgang Betz 130:770ce14d3d15 291
Wolfgang Betz 130:770ce14d3d15 292 if (header_slave[0] == 0x02) {
Wolfgang Betz 130:770ce14d3d15 293 /* device is ready */
Wolfgang Betz 130:770ce14d3d15 294 byte_count = (header_slave[4]<<8)|header_slave[3];
Wolfgang Betz 130:770ce14d3d15 295
Wolfgang Betz 130:770ce14d3d15 296 if (byte_count > 0) {
Wolfgang Betz 130:770ce14d3d15 297
Wolfgang Betz 130:770ce14d3d15 298 /* avoid to read more data that size of the buffer */
Wolfgang Betz 130:770ce14d3d15 299 if (byte_count > buff_size){
Wolfgang Betz 130:770ce14d3d15 300 byte_count = buff_size;
Wolfgang Betz 130:770ce14d3d15 301 }
Wolfgang Betz 130:770ce14d3d15 302
Wolfgang Betz 130:770ce14d3d15 303 for (len = 0; len < byte_count; len++){
Wolfgang Betz 130:770ce14d3d15 304 read_char = spi_.write(char_ff);
Wolfgang Betz 130:770ce14d3d15 305 buffer[len] = read_char;
Wolfgang Betz 130:770ce14d3d15 306 }
Wolfgang Betz 130:770ce14d3d15 307 }
Wolfgang Betz 130:770ce14d3d15 308 }
Wolfgang Betz 130:770ce14d3d15 309 /* Release CS line to deselect the chip */
Wolfgang Betz 130:770ce14d3d15 310 nCS_ = 1;
Wolfgang Betz 130:770ce14d3d15 311
Wolfgang Betz 130:770ce14d3d15 312 // Add a small delay to give time to the BlueNRG to set the IRQ pin low
Wolfgang Betz 130:770ce14d3d15 313 // to avoid a useless SPI read at the end of the transaction
Wolfgang Betz 130:770ce14d3d15 314 for(volatile int i = 0; i < 2; i++)__NOP();
Wolfgang Betz 130:770ce14d3d15 315
Wolfgang Betz 130:770ce14d3d15 316 #ifdef PRINT_CSV_FORMAT
Wolfgang Betz 130:770ce14d3d15 317 if (len > 0) {
Wolfgang Betz 130:770ce14d3d15 318 print_csv_time();
Wolfgang Betz 130:770ce14d3d15 319 for (int i=0; i<len; i++) {
Wolfgang Betz 130:770ce14d3d15 320 PRINT_CSV(" %02x", buffer[i]);
Wolfgang Betz 130:770ce14d3d15 321 }
Wolfgang Betz 130:770ce14d3d15 322 PRINT_CSV("\n");
Wolfgang Betz 130:770ce14d3d15 323 }
Wolfgang Betz 130:770ce14d3d15 324 #endif
Wolfgang Betz 130:770ce14d3d15 325
Wolfgang Betz 130:770ce14d3d15 326 return len;
Wolfgang Betz 130:770ce14d3d15 327 }
Wolfgang Betz 130:770ce14d3d15 328
Wolfgang Betz 130:770ce14d3d15 329 /**
Wolfgang Betz 130:770ce14d3d15 330 * @brief Writes data from local buffer to SPI.
Wolfgang Betz 130:770ce14d3d15 331 * @param data1 : First data buffer to be written
Wolfgang Betz 130:770ce14d3d15 332 * @param data2 : Second data buffer to be written
Wolfgang Betz 130:770ce14d3d15 333 * @param Nb_bytes1: Size of first data buffer to be written
Wolfgang Betz 130:770ce14d3d15 334 * @param Nb_bytes2: Size of second data buffer to be written
Wolfgang Betz 130:770ce14d3d15 335 * @retval Number of read bytes
Wolfgang Betz 130:770ce14d3d15 336 */
Wolfgang Betz 130:770ce14d3d15 337 int32_t BlueNRGDevice::spiWrite(uint8_t* data1,
Wolfgang Betz 130:770ce14d3d15 338 uint8_t* data2, uint8_t Nb_bytes1, uint8_t Nb_bytes2)
Wolfgang Betz 130:770ce14d3d15 339 {
Wolfgang Betz 130:770ce14d3d15 340 int32_t result = 0;
Wolfgang Betz 130:770ce14d3d15 341 uint32_t i;
Wolfgang Betz 130:770ce14d3d15 342 volatile uint8_t tmpreg;
Wolfgang Betz 130:770ce14d3d15 343
Wolfgang Betz 130:770ce14d3d15 344 unsigned char header_master[HEADER_SIZE] = {0x0a, 0x00, 0x00, 0x00, 0x00};
Wolfgang Betz 130:770ce14d3d15 345 unsigned char header_slave[HEADER_SIZE] = {0xaa, 0x00, 0x00, 0x00, 0x00};
Wolfgang Betz 130:770ce14d3d15 346
Wolfgang Betz 130:770ce14d3d15 347 disable_irq();
Wolfgang Betz 130:770ce14d3d15 348
Wolfgang Betz 130:770ce14d3d15 349 /* CS reset */
Wolfgang Betz 130:770ce14d3d15 350 nCS_ = 0;
Wolfgang Betz 130:770ce14d3d15 351
Wolfgang Betz 130:770ce14d3d15 352 /* Exchange header */
Wolfgang Betz 130:770ce14d3d15 353 for (i = 0; i < 5; i++)
Wolfgang Betz 130:770ce14d3d15 354 {
Wolfgang Betz 130:770ce14d3d15 355 tmpreg = spi_.write(header_master[i]);
Wolfgang Betz 130:770ce14d3d15 356 header_slave[i] = tmpreg;
Wolfgang Betz 130:770ce14d3d15 357 }
Wolfgang Betz 130:770ce14d3d15 358
Wolfgang Betz 130:770ce14d3d15 359 if (header_slave[0] == 0x02) {
Wolfgang Betz 130:770ce14d3d15 360 /* SPI is ready */
Wolfgang Betz 130:770ce14d3d15 361 if (header_slave[1] >= (Nb_bytes1+Nb_bytes2)) {
Wolfgang Betz 130:770ce14d3d15 362
Wolfgang Betz 130:770ce14d3d15 363 /* Buffer is big enough */
Wolfgang Betz 130:770ce14d3d15 364 for (i = 0; i < Nb_bytes1; i++) {
Wolfgang Betz 130:770ce14d3d15 365 spi_.write(*(data1 + i));
Wolfgang Betz 130:770ce14d3d15 366 }
Wolfgang Betz 130:770ce14d3d15 367 for (i = 0; i < Nb_bytes2; i++) {
Wolfgang Betz 130:770ce14d3d15 368 spi_.write(*(data2 + i));
Wolfgang Betz 130:770ce14d3d15 369 }
Wolfgang Betz 130:770ce14d3d15 370 } else {
Wolfgang Betz 130:770ce14d3d15 371 /* Buffer is too small */
Wolfgang Betz 130:770ce14d3d15 372 result = -2;
Wolfgang Betz 130:770ce14d3d15 373 }
Wolfgang Betz 130:770ce14d3d15 374 } else {
Wolfgang Betz 130:770ce14d3d15 375 /* SPI is not ready */
Wolfgang Betz 130:770ce14d3d15 376 result = -1;
Wolfgang Betz 130:770ce14d3d15 377 }
Wolfgang Betz 130:770ce14d3d15 378
Wolfgang Betz 130:770ce14d3d15 379 /* Release CS line */
Wolfgang Betz 130:770ce14d3d15 380 //HAL_GPIO_WritePin(BNRG_SPI_CS_PORT, BNRG_SPI_CS_PIN, GPIO_PIN_SET);
Wolfgang Betz 130:770ce14d3d15 381 nCS_ = 1;
Wolfgang Betz 130:770ce14d3d15 382
Wolfgang Betz 130:770ce14d3d15 383 enable_irq();
Wolfgang Betz 130:770ce14d3d15 384
Wolfgang Betz 130:770ce14d3d15 385 return result;
Wolfgang Betz 130:770ce14d3d15 386 }
Wolfgang Betz 130:770ce14d3d15 387
Wolfgang Betz 130:770ce14d3d15 388 bool BlueNRGDevice::dataPresent()
Wolfgang Betz 130:770ce14d3d15 389 {
Wolfgang Betz 130:770ce14d3d15 390 return (irq_ == 1);
Wolfgang Betz 130:770ce14d3d15 391 }
Wolfgang Betz 130:770ce14d3d15 392
Wolfgang Betz 130:770ce14d3d15 393 void BlueNRGDevice::disable_irq()
Wolfgang Betz 130:770ce14d3d15 394 {
Wolfgang Betz 130:770ce14d3d15 395 irq_.disable_irq();
Wolfgang Betz 130:770ce14d3d15 396 }
Wolfgang Betz 130:770ce14d3d15 397
Wolfgang Betz 130:770ce14d3d15 398 void BlueNRGDevice::enable_irq()
Wolfgang Betz 130:770ce14d3d15 399 {
Wolfgang Betz 130:770ce14d3d15 400 irq_.enable_irq();
Wolfgang Betz 130:770ce14d3d15 401 }