Bluetooth Low Energy / BLE_API

High level Bluetooth Low Energy API and radio abstraction layer

Dependents:   BLE_ANCS_SDAPI BLE_temperature BLE_HeartRate BLE_ANCS_SDAPI_IRC ... more

Overview

The BLE_API is a high level abstraction for using Bluetooth Low Energy on multiple platforms. For details and examples using the BLE_API please see the BLE_API Summary Page. Or click on the API Documentation tab above.

Supported Services

Supported services can be found in the BLE_API/services folder.

ble/BLE.h@1142:a358d0d20f62, 2016-04-06 (annotated)

Committer:
vcoubard
Date:
Wed Apr 06 19:14:07 2016 +0100
Revision:
1142:a358d0d20f62
Parent:
1141:510f5d2d2732
Child:
1144:249843612f87
Synchronized with git rev bd8abfe4

Author: Andres Amaya Garcia

Fix remaining doxygen warnings in BLE.h

Who changed what in which revision?

UserRevisionLine numberNew contents of line
vcoubard 1131:692ddf04fc42 1 /* mbed Microcontroller Library
vcoubard 1131:692ddf04fc42 2 * Copyright (c) 2006-2013 ARM Limited
vcoubard 1131:692ddf04fc42 3 *
vcoubard 1131:692ddf04fc42 4 * Licensed under the Apache License, Version 2.0 (the "License");
vcoubard 1131:692ddf04fc42 5 * you may not use this file except in compliance with the License.
vcoubard 1131:692ddf04fc42 6 * You may obtain a copy of the License at
vcoubard 1131:692ddf04fc42 7 *
vcoubard 1131:692ddf04fc42 8 * http://www.apache.org/licenses/LICENSE-2.0
vcoubard 1131:692ddf04fc42 9 *
vcoubard 1131:692ddf04fc42 10 * Unless required by applicable law or agreed to in writing, software
vcoubard 1131:692ddf04fc42 11 * distributed under the License is distributed on an "AS IS" BASIS,
vcoubard 1131:692ddf04fc42 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
vcoubard 1131:692ddf04fc42 13 * See the License for the specific language governing permissions and
vcoubard 1131:692ddf04fc42 14 * limitations under the License.
vcoubard 1131:692ddf04fc42 15 */
vcoubard 1131:692ddf04fc42 16
vcoubard 1131:692ddf04fc42 17 #ifndef __BLE_H__
vcoubard 1131:692ddf04fc42 18 #define __BLE_H__
vcoubard 1131:692ddf04fc42 19
vcoubard 1131:692ddf04fc42 20 #include "blecommon.h"
vcoubard 1131:692ddf04fc42 21 #include "Gap.h"
vcoubard 1131:692ddf04fc42 22 #include "GattServer.h"
vcoubard 1131:692ddf04fc42 23 #include "GattClient.h"
vcoubard 1131:692ddf04fc42 24
vcoubard 1131:692ddf04fc42 25 #include "ble/FunctionPointerWithContext.h"
vcoubard 1131:692ddf04fc42 26
vcoubard 1131:692ddf04fc42 27 #ifdef YOTTA_CFG_MBED_OS
vcoubard 1131:692ddf04fc42 28 #include "mbed-drivers/mbed_error.h"
vcoubard 1131:692ddf04fc42 29 #else
vcoubard 1131:692ddf04fc42 30 #include "mbed_error.h"
vcoubard 1131:692ddf04fc42 31 #endif
vcoubard 1131:692ddf04fc42 32
vcoubard 1131:692ddf04fc42 33 /* Forward declaration for the implementation class */
vcoubard 1131:692ddf04fc42 34 class BLEInstanceBase;
vcoubard 1131:692ddf04fc42 35
vcoubard 1131:692ddf04fc42 36 /**
vcoubard 1131:692ddf04fc42 37 * The base class used to abstract away BLE-capable radio transceivers or SOCs,
vcoubard 1131:692ddf04fc42 38 * so that the BLE API can work with any radio transparently.
vcoubard 1131:692ddf04fc42 39 */
vcoubard 1131:692ddf04fc42 40 class BLE
vcoubard 1131:692ddf04fc42 41 {
vcoubard 1131:692ddf04fc42 42 public:
vcoubard 1141:510f5d2d2732 43 typedef unsigned InstanceID_t; /**< The type returned by BLE::getInstanceID(). */
vcoubard 1131:692ddf04fc42 44
vcoubard 1131:692ddf04fc42 45 /**
vcoubard 1131:692ddf04fc42 46 * The context provided to init-completion-callbacks (see init() below).
vcoubard 1131:692ddf04fc42 47 *
vcoubard 1131:692ddf04fc42 48 * @param ble
vcoubard 1131:692ddf04fc42 49 * A reference to the BLE instance being initialized.
vcoubard 1131:692ddf04fc42 50 * @param error
vcoubard 1131:692ddf04fc42 51 * Captures the result of initialization. It is set to
vcoubard 1131:692ddf04fc42 52 * BLE_ERROR_NONE if initialization completed successfully. Else
vcoubard 1131:692ddf04fc42 53 * the error value is implementation specific.
vcoubard 1131:692ddf04fc42 54 */
vcoubard 1131:692ddf04fc42 55 struct InitializationCompleteCallbackContext {
vcoubard 1141:510f5d2d2732 56 BLE& ble; /**< Reference to the BLE object that has been initialized */
vcoubard 1141:510f5d2d2732 57 ble_error_t error; /**< Error status of the initialization. It is set to BLE_ERROR_NONE if initialization completed successfully. */
vcoubard 1131:692ddf04fc42 58 };
vcoubard 1131:692ddf04fc42 59
vcoubard 1131:692ddf04fc42 60 /**
vcoubard 1131:692ddf04fc42 61 * The signature for function-pointer like callbacks for initialization-completion.
vcoubard 1131:692ddf04fc42 62 *
vcoubard 1131:692ddf04fc42 63 * @note There are two versions of init(). In addition to the simple
vcoubard 1131:692ddf04fc42 64 * function-pointer, init() can also take a <Object, member> tuple as its
vcoubard 1131:692ddf04fc42 65 * callback target. In case of the latter, the following declaration doesn't apply.
vcoubard 1131:692ddf04fc42 66 */
vcoubard 1131:692ddf04fc42 67 typedef void (*InitializationCompleteCallback_t)(InitializationCompleteCallbackContext *context);
vcoubard 1131:692ddf04fc42 68
vcoubard 1131:692ddf04fc42 69 /**
vcoubard 1131:692ddf04fc42 70 * Initialize the BLE controller. This should be called before using
vcoubard 1142:a358d0d20f62 71 * anything else in the BLE API.
vcoubard 1131:692ddf04fc42 72 *
vcoubard 1131:692ddf04fc42 73 * init() hands control to the underlying BLE module to accomplish
vcoubard 1131:692ddf04fc42 74 * initialization. This initialization may tacitly depend on other hardware
vcoubard 1131:692ddf04fc42 75 * setup (such as clocks or power-modes) that happens early on during
vcoubard 1131:692ddf04fc42 76 * system startup. It may not be safe to call init() from a global static
vcoubard 1131:692ddf04fc42 77 * context where ordering is compiler-specific and can't be guaranteed - it
vcoubard 1131:692ddf04fc42 78 * is safe to call BLE::init() from within main().
vcoubard 1131:692ddf04fc42 79 *
vcoubard 1131:692ddf04fc42 80 * @param initCompleteCallback
vcoubard 1131:692ddf04fc42 81 * A callback for when initialization completes for a BLE
vcoubard 1131:692ddf04fc42 82 * instance. This is an optional parameter; if no callback is
vcoubard 1131:692ddf04fc42 83 * set up the application can still determine the status of
vcoubard 1131:692ddf04fc42 84 * initialization using BLE::hasInitialized() (see below).
vcoubard 1131:692ddf04fc42 85 *
vcoubard 1131:692ddf04fc42 86 * @return BLE_ERROR_NONE if the initialization procedure was started
vcoubard 1131:692ddf04fc42 87 * successfully.
vcoubard 1131:692ddf04fc42 88 *
vcoubard 1131:692ddf04fc42 89 * @note If init() returns BLE_ERROR_NONE, the underlying stack must invoke
vcoubard 1131:692ddf04fc42 90 * the initialization completion callback at some point.
vcoubard 1131:692ddf04fc42 91 *
vcoubard 1131:692ddf04fc42 92 * @note In some cases, initialization is instantaneous (or blocking); if
vcoubard 1131:692ddf04fc42 93 * so, it is acceptable for the stack-specific implementation of init()
vcoubard 1131:692ddf04fc42 94 * to invoke the completion callback directly (within its own
vcoubard 1131:692ddf04fc42 95 * context).
vcoubard 1131:692ddf04fc42 96 *
vcoubard 1131:692ddf04fc42 97 * @note Nearly all BLE APIs would return
vcoubard 1131:692ddf04fc42 98 * BLE_ERROR_INITIALIZATION_INCOMPLETE if used on an instance before the
vcoubard 1131:692ddf04fc42 99 * corresponding transport is initialized.
vcoubard 1131:692ddf04fc42 100 *
vcoubard 1131:692ddf04fc42 101 * @note There are two versions of init(). In addition to the simple
vcoubard 1131:692ddf04fc42 102 * function-pointer, init() can also take an <Object, member> tuple as its
vcoubard 1131:692ddf04fc42 103 * callback target.
vcoubard 1131:692ddf04fc42 104 */
vcoubard 1131:692ddf04fc42 105 ble_error_t init(InitializationCompleteCallback_t initCompleteCallback = NULL) {
vcoubard 1131:692ddf04fc42 106 FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(initCompleteCallback);
vcoubard 1131:692ddf04fc42 107 return initImplementation(callback);
vcoubard 1131:692ddf04fc42 108 }
vcoubard 1131:692ddf04fc42 109
vcoubard 1131:692ddf04fc42 110 /**
vcoubard 1131:692ddf04fc42 111 * An alternate declaration for init(). This one takes an <Object, member> tuple as its
vcoubard 1131:692ddf04fc42 112 * callback target.
vcoubard 1131:692ddf04fc42 113 */
vcoubard 1131:692ddf04fc42 114 template<typename T>
vcoubard 1131:692ddf04fc42 115 ble_error_t init(T *object, void (T::*initCompleteCallback)(InitializationCompleteCallbackContext *context)) {
vcoubard 1131:692ddf04fc42 116 FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(object, initCompleteCallback);
vcoubard 1131:692ddf04fc42 117 return initImplementation(callback);
vcoubard 1131:692ddf04fc42 118 }
vcoubard 1131:692ddf04fc42 119
vcoubard 1131:692ddf04fc42 120 /**
vcoubard 1131:692ddf04fc42 121 * @return true if initialization has completed for the underlying BLE
vcoubard 1131:692ddf04fc42 122 * transport.
vcoubard 1131:692ddf04fc42 123 *
vcoubard 1131:692ddf04fc42 124 * The application can set up a callback to signal completion of
vcoubard 1131:692ddf04fc42 125 * initialization when using init(). Otherwise, this method can be used to
vcoubard 1131:692ddf04fc42 126 * poll the state of initialization.
vcoubard 1131:692ddf04fc42 127 */
vcoubard 1131:692ddf04fc42 128 bool hasInitialized(void) const;
vcoubard 1131:692ddf04fc42 129
vcoubard 1131:692ddf04fc42 130 /**
vcoubard 1131:692ddf04fc42 131 * Purge the BLE stack of GATT and GAP state. init() must be called
vcoubard 1131:692ddf04fc42 132 * afterwards to re-instate services and GAP state. This API offers a way to
vcoubard 1131:692ddf04fc42 133 * repopulate the GATT database with new services and characteristics.
vcoubard 1131:692ddf04fc42 134 */
vcoubard 1131:692ddf04fc42 135 ble_error_t shutdown(void);
vcoubard 1131:692ddf04fc42 136
vcoubard 1131:692ddf04fc42 137 /**
vcoubard 1131:692ddf04fc42 138 * This call allows the application to get the BLE stack version information.
vcoubard 1131:692ddf04fc42 139 *
vcoubard 1131:692ddf04fc42 140 * @return A pointer to a const string representing the version.
vcoubard 1141:510f5d2d2732 141 *
vcoubard 1142:a358d0d20f62 142 * @note The string returned is owned by BLE API.
vcoubard 1131:692ddf04fc42 143 */
vcoubard 1131:692ddf04fc42 144 const char *getVersion(void);
vcoubard 1131:692ddf04fc42 145
vcoubard 1142:a358d0d20f62 146 /**
vcoubard 1142:a358d0d20f62 147 * Accessor to Gap. All Gap related functionality requires
vcoubard 1131:692ddf04fc42 148 * going through this accessor.
vcoubard 1142:a358d0d20f62 149 *
vcoubard 1142:a358d0d20f62 150 * @return A reference to a Gap object associated to this BLE instance.
vcoubard 1142:a358d0d20f62 151 */
vcoubard 1142:a358d0d20f62 152 Gap &gap();
vcoubard 1142:a358d0d20f62 153
vcoubard 1142:a358d0d20f62 154 /**
vcoubard 1142:a358d0d20f62 155 * A const alternative to gap().
vcoubard 1142:a358d0d20f62 156 *
vcoubard 1142:a358d0d20f62 157 * @return A const reference to a Gap object associated to this BLE instance.
vcoubard 1131:692ddf04fc42 158 */
vcoubard 1131:692ddf04fc42 159 const Gap &gap() const;
vcoubard 1131:692ddf04fc42 160
vcoubard 1142:a358d0d20f62 161 /**
vcoubard 1142:a358d0d20f62 162 * Accessor to GattServer. All GattServer related functionality requires
vcoubard 1142:a358d0d20f62 163 * going through this accessor.
vcoubard 1142:a358d0d20f62 164 *
vcoubard 1142:a358d0d20f62 165 * @return A reference to a GattServer object associated to this BLE instance.
vcoubard 1131:692ddf04fc42 166 */
vcoubard 1131:692ddf04fc42 167 GattServer& gattServer();
vcoubard 1131:692ddf04fc42 168
vcoubard 1142:a358d0d20f62 169 /**
vcoubard 1142:a358d0d20f62 170 * A const alternative to gattServer().
vcoubard 1142:a358d0d20f62 171 *
vcoubard 1142:a358d0d20f62 172 * @return A const reference to a GattServer object associated to this BLE instance.
vcoubard 1131:692ddf04fc42 173 */
vcoubard 1142:a358d0d20f62 174 const GattServer& gattServer() const;
vcoubard 1142:a358d0d20f62 175
vcoubard 1142:a358d0d20f62 176 /**
vcoubard 1142:a358d0d20f62 177 * Accessors to GattClient. All GattClient related functionality requires going
vcoubard 1142:a358d0d20f62 178 * through this accessor.
vcoubard 1142:a358d0d20f62 179 *
vcoubard 1142:a358d0d20f62 180 * @return A reference to a GattClient object associated to this BLE instance.
vcoubard 1142:a358d0d20f62 181 */
vcoubard 1131:692ddf04fc42 182 GattClient& gattClient();
vcoubard 1131:692ddf04fc42 183
vcoubard 1142:a358d0d20f62 184 /**
vcoubard 1142:a358d0d20f62 185 * A const alternative to gattClient().
vcoubard 1142:a358d0d20f62 186 *
vcoubard 1142:a358d0d20f62 187 * @return A const reference to a GattClient object associated to this BLE instance.
vcoubard 1142:a358d0d20f62 188 */
vcoubard 1142:a358d0d20f62 189 const GattClient& gattClient() const;
vcoubard 1142:a358d0d20f62 190
vcoubard 1142:a358d0d20f62 191 /**
vcoubard 1142:a358d0d20f62 192 * Accessors to SecurityManager. All SecurityManager related functionality requires
vcoubard 1142:a358d0d20f62 193 * going through this accessor.
vcoubard 1142:a358d0d20f62 194 *
vcoubard 1142:a358d0d20f62 195 * @return A reference to a SecurityManager object associated to this BLE instance.
vcoubard 1142:a358d0d20f62 196 */
vcoubard 1142:a358d0d20f62 197 SecurityManager& securityManager();
vcoubard 1142:a358d0d20f62 198
vcoubard 1142:a358d0d20f62 199 /**
vcoubard 1142:a358d0d20f62 200 * A const alternative to securityManager().
vcoubard 1142:a358d0d20f62 201 *
vcoubard 1142:a358d0d20f62 202 * @return A const reference to a SecurityManager object associated to this BLE instance.
vcoubard 1131:692ddf04fc42 203 */
vcoubard 1131:692ddf04fc42 204 const SecurityManager& securityManager() const;
vcoubard 1131:692ddf04fc42 205
vcoubard 1131:692ddf04fc42 206 /**
vcoubard 1131:692ddf04fc42 207 * Yield control to the BLE stack or to other tasks waiting for events. This
vcoubard 1131:692ddf04fc42 208 * is a sleep function that will return when there is an application-specific
vcoubard 1131:692ddf04fc42 209 * interrupt, but the MCU might wake up several times before
vcoubard 1131:692ddf04fc42 210 * returning (to service the stack). This is not always interchangeable with
vcoubard 1131:692ddf04fc42 211 * WFE().
vcoubard 1131:692ddf04fc42 212 */
vcoubard 1131:692ddf04fc42 213 void waitForEvent(void);
vcoubard 1131:692ddf04fc42 214
vcoubard 1131:692ddf04fc42 215 public:
vcoubard 1142:a358d0d20f62 216 /**
vcoubard 1142:a358d0d20f62 217 * The value of the BLE::InstanceID_t for the default BLE instance.
vcoubard 1142:a358d0d20f62 218 */
vcoubard 1131:692ddf04fc42 219 static const InstanceID_t DEFAULT_INSTANCE = 0;
vcoubard 1131:692ddf04fc42 220 #ifndef YOTTA_CFG_BLE_INSTANCES_COUNT
vcoubard 1142:a358d0d20f62 221 /**
vcoubard 1142:a358d0d20f62 222 * The number of permitted BLE instances for the application.
vcoubard 1142:a358d0d20f62 223 */
vcoubard 1131:692ddf04fc42 224 static const InstanceID_t NUM_INSTANCES = 1;
vcoubard 1131:692ddf04fc42 225 #else
vcoubard 1142:a358d0d20f62 226 /**
vcoubard 1142:a358d0d20f62 227 * The number of permitted BLE instances for the application.
vcoubard 1142:a358d0d20f62 228 */
vcoubard 1131:692ddf04fc42 229 static const InstanceID_t NUM_INSTANCES = YOTTA_CFG_BLE_INSTANCES_COUNT;
vcoubard 1131:692ddf04fc42 230 #endif
vcoubard 1131:692ddf04fc42 231
vcoubard 1131:692ddf04fc42 232 /**
vcoubard 1131:692ddf04fc42 233 * Get a reference to the BLE singleton corresponding to a given interface.
vcoubard 1131:692ddf04fc42 234 * There is a static array of BLE singletons.
vcoubard 1131:692ddf04fc42 235 *
vcoubard 1142:a358d0d20f62 236 * @note Calling Instance() is preferred over constructing a BLE object
vcoubard 1131:692ddf04fc42 237 * directly, as it returns references to singletons.
vcoubard 1131:692ddf04fc42 238 *
vcoubard 1131:692ddf04fc42 239 * @param[in] id
vcoubard 1135:22aada733dbd 240 * Instance-ID. This should be less than NUM_INSTANCES
vcoubard 1131:692ddf04fc42 241 * for the returned BLE singleton to be useful.
vcoubard 1131:692ddf04fc42 242 *
vcoubard 1142:a358d0d20f62 243 * @return A reference to a single object.
vcoubard 1131:692ddf04fc42 244 */
vcoubard 1131:692ddf04fc42 245 static BLE &Instance(InstanceID_t id = DEFAULT_INSTANCE);
vcoubard 1131:692ddf04fc42 246
vcoubard 1131:692ddf04fc42 247 /**
vcoubard 1131:692ddf04fc42 248 * Constructor for a handle to a BLE instance (the BLE stack). BLE handles
vcoubard 1131:692ddf04fc42 249 * are thin wrappers around a transport object (that is, ptr. to
vcoubard 1131:692ddf04fc42 250 * BLEInstanceBase).
vcoubard 1131:692ddf04fc42 251 *
vcoubard 1131:692ddf04fc42 252 * It is better to create BLE objects as singletons accessed through the
vcoubard 1131:692ddf04fc42 253 * Instance() method. If multiple BLE handles are constructed for the same
vcoubard 1131:692ddf04fc42 254 * interface (using this constructor), they will share the same underlying
vcoubard 1131:692ddf04fc42 255 * transport object.
vcoubard 1131:692ddf04fc42 256 */
vcoubard 1131:692ddf04fc42 257 BLE(InstanceID_t instanceID = DEFAULT_INSTANCE);
vcoubard 1131:692ddf04fc42 258
vcoubard 1131:692ddf04fc42 259 /**
vcoubard 1131:692ddf04fc42 260 * Fetch the ID of a BLE instance. Typically there would only be the DEFAULT_INSTANCE.
vcoubard 1131:692ddf04fc42 261 */
vcoubard 1131:692ddf04fc42 262 InstanceID_t getInstanceID(void) const {
vcoubard 1131:692ddf04fc42 263 return instanceID;
vcoubard 1131:692ddf04fc42 264 }
vcoubard 1131:692ddf04fc42 265
vcoubard 1131:692ddf04fc42 266 /*
vcoubard 1131:692ddf04fc42 267 * Deprecation alert!
vcoubard 1131:692ddf04fc42 268 * All of the following are deprecated and may be dropped in a future
vcoubard 1131:692ddf04fc42 269 * release. Documentation should refer to alternative APIs.
vcoubard 1131:692ddf04fc42 270 */
vcoubard 1131:692ddf04fc42 271
vcoubard 1131:692ddf04fc42 272 /* GAP specific APIs. */
vcoubard 1131:692ddf04fc42 273 public:
vcoubard 1131:692ddf04fc42 274 /**
vcoubard 1131:692ddf04fc42 275 * Set the BTLE MAC address and type.
vcoubard 1131:692ddf04fc42 276 * @return BLE_ERROR_NONE on success.
vcoubard 1131:692ddf04fc42 277 *
vcoubard 1142:a358d0d20f62 278 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 279 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 280 * ble.setAddress(...) should be replaced with
vcoubard 1131:692ddf04fc42 281 * ble.gap().setAddress(...).
vcoubard 1131:692ddf04fc42 282 */
vcoubard 1135:22aada733dbd 283 ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::AddressBytes_t address) {
vcoubard 1131:692ddf04fc42 284 return gap().setAddress(type, address);
vcoubard 1131:692ddf04fc42 285 }
vcoubard 1131:692ddf04fc42 286
vcoubard 1131:692ddf04fc42 287 /**
vcoubard 1142:a358d0d20f62 288 * Fetch the Bluetooth Low Energy MAC address and type.
vcoubard 1131:692ddf04fc42 289 * @return BLE_ERROR_NONE on success.
vcoubard 1131:692ddf04fc42 290 *
vcoubard 1142:a358d0d20f62 291 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 292 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 293 * ble.getAddress(...) should be replaced with
vcoubard 1131:692ddf04fc42 294 * ble.gap().getAddress(...).
vcoubard 1131:692ddf04fc42 295 */
vcoubard 1135:22aada733dbd 296 ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::AddressBytes_t address) {
vcoubard 1131:692ddf04fc42 297 return gap().getAddress(typeP, address);
vcoubard 1131:692ddf04fc42 298 }
vcoubard 1131:692ddf04fc42 299
vcoubard 1131:692ddf04fc42 300 /**
vcoubard 1131:692ddf04fc42 301 * Set the GAP advertising mode to use for this device.
vcoubard 1131:692ddf04fc42 302 *
vcoubard 1142:a358d0d20f62 303 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 304 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 305 * ble.setAdvertisingType(...) should be replaced with
vcoubard 1131:692ddf04fc42 306 * ble.gap().setAdvertisingType(...).
vcoubard 1131:692ddf04fc42 307 */
vcoubard 1131:692ddf04fc42 308 void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
vcoubard 1131:692ddf04fc42 309 gap().setAdvertisingType(advType);
vcoubard 1131:692ddf04fc42 310 }
vcoubard 1131:692ddf04fc42 311
vcoubard 1131:692ddf04fc42 312 /**
vcoubard 1131:692ddf04fc42 313 * @param[in] interval
vcoubard 1131:692ddf04fc42 314 * Advertising interval in units of milliseconds. Advertising
vcoubard 1131:692ddf04fc42 315 * is disabled if interval is 0. If interval is smaller than
vcoubard 1131:692ddf04fc42 316 * the minimum supported value, then the minimum supported
vcoubard 1131:692ddf04fc42 317 * value is used instead. This minimum value can be discovered
vcoubard 1131:692ddf04fc42 318 * using getMinAdvertisingInterval().
vcoubard 1131:692ddf04fc42 319 *
vcoubard 1131:692ddf04fc42 320 * This field must be set to 0 if connectionMode is equal
vcoubard 1131:692ddf04fc42 321 * to ADV_CONNECTABLE_DIRECTED.
vcoubard 1131:692ddf04fc42 322 *
vcoubard 1142:a358d0d20f62 323 * @note Decreasing this value allows central devices to detect a
vcoubard 1131:692ddf04fc42 324 * peripheral faster, at the expense of more power being used by the radio
vcoubard 1131:692ddf04fc42 325 * due to the higher data transmit rate.
vcoubard 1131:692ddf04fc42 326 *
vcoubard 1142:a358d0d20f62 327 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 328 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 329 * ble.setAdvertisingInterval(...) should be replaced with
vcoubard 1131:692ddf04fc42 330 * ble.gap().setAdvertisingInterval(...).
vcoubard 1131:692ddf04fc42 331 *
vcoubard 1142:a358d0d20f62 332 * @note WARNING: This API previously used 0.625ms as the unit for its
vcoubard 1131:692ddf04fc42 333 * 'interval' argument. That required an explicit conversion from
vcoubard 1131:692ddf04fc42 334 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
vcoubard 1131:692ddf04fc42 335 * no longer required as the new units are milliseconds. Any application
vcoubard 1131:692ddf04fc42 336 * code depending on the old semantics needs to be updated accordingly.
vcoubard 1131:692ddf04fc42 337 */
vcoubard 1131:692ddf04fc42 338 void setAdvertisingInterval(uint16_t interval) {
vcoubard 1131:692ddf04fc42 339 gap().setAdvertisingInterval(interval);
vcoubard 1131:692ddf04fc42 340 }
vcoubard 1131:692ddf04fc42 341
vcoubard 1131:692ddf04fc42 342 /**
vcoubard 1131:692ddf04fc42 343 * @return Minimum Advertising interval in milliseconds.
vcoubard 1131:692ddf04fc42 344 *
vcoubard 1142:a358d0d20f62 345 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 346 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 347 * ble.getMinAdvertisingInterval(...) should be replaced with
vcoubard 1131:692ddf04fc42 348 * ble.gap().getMinAdvertisingInterval(...).
vcoubard 1131:692ddf04fc42 349 */
vcoubard 1131:692ddf04fc42 350 uint16_t getMinAdvertisingInterval(void) const {
vcoubard 1131:692ddf04fc42 351 return gap().getMinAdvertisingInterval();
vcoubard 1131:692ddf04fc42 352 }
vcoubard 1131:692ddf04fc42 353
vcoubard 1131:692ddf04fc42 354 /**
vcoubard 1131:692ddf04fc42 355 * @return Minimum Advertising interval in milliseconds for non-connectible mode.
vcoubard 1131:692ddf04fc42 356 *
vcoubard 1142:a358d0d20f62 357 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 358 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 359 * ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
vcoubard 1131:692ddf04fc42 360 * ble.gap().getMinNonConnectableAdvertisingInterval(...).
vcoubard 1131:692ddf04fc42 361 */
vcoubard 1131:692ddf04fc42 362 uint16_t getMinNonConnectableAdvertisingInterval(void) const {
vcoubard 1131:692ddf04fc42 363 return gap().getMinNonConnectableAdvertisingInterval();
vcoubard 1131:692ddf04fc42 364 }
vcoubard 1131:692ddf04fc42 365
vcoubard 1131:692ddf04fc42 366 /**
vcoubard 1131:692ddf04fc42 367 * @return Maximum Advertising interval in milliseconds.
vcoubard 1131:692ddf04fc42 368 *
vcoubard 1142:a358d0d20f62 369 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 370 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 371 * ble.getMaxAdvertisingInterval(...) should be replaced with
vcoubard 1131:692ddf04fc42 372 * ble.gap().getMaxAdvertisingInterval(...).
vcoubard 1131:692ddf04fc42 373 */
vcoubard 1131:692ddf04fc42 374 uint16_t getMaxAdvertisingInterval(void) const {
vcoubard 1131:692ddf04fc42 375 return gap().getMaxAdvertisingInterval();
vcoubard 1131:692ddf04fc42 376 }
vcoubard 1131:692ddf04fc42 377
vcoubard 1131:692ddf04fc42 378 /**
vcoubard 1131:692ddf04fc42 379 * @param[in] timeout
vcoubard 1131:692ddf04fc42 380 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
vcoubard 1131:692ddf04fc42 381 * and 16383). Use 0 to disable the advertising timeout.
vcoubard 1131:692ddf04fc42 382 *
vcoubard 1142:a358d0d20f62 383 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 384 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 385 * ble.setAdvertisingTimeout(...) should be replaced with
vcoubard 1131:692ddf04fc42 386 * ble.gap().setAdvertisingTimeout(...).
vcoubard 1131:692ddf04fc42 387 */
vcoubard 1131:692ddf04fc42 388 void setAdvertisingTimeout(uint16_t timeout) {
vcoubard 1131:692ddf04fc42 389 gap().setAdvertisingTimeout(timeout);
vcoubard 1131:692ddf04fc42 390 }
vcoubard 1131:692ddf04fc42 391
vcoubard 1131:692ddf04fc42 392 /**
vcoubard 1131:692ddf04fc42 393 * Set up a particular, user-constructed set of advertisement parameters for
vcoubard 1131:692ddf04fc42 394 * the underlying stack. It would be uncommon for this API to be used
vcoubard 1131:692ddf04fc42 395 * directly; there are other APIs to tweak advertisement parameters
vcoubard 1131:692ddf04fc42 396 * individually (see above).
vcoubard 1131:692ddf04fc42 397 *
vcoubard 1142:a358d0d20f62 398 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 399 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 400 * ble.setAdvertisingParams(...) should be replaced with
vcoubard 1131:692ddf04fc42 401 * ble.gap().setAdvertisingParams(...).
vcoubard 1131:692ddf04fc42 402 */
vcoubard 1131:692ddf04fc42 403 void setAdvertisingParams(const GapAdvertisingParams &advParams) {
vcoubard 1131:692ddf04fc42 404 gap().setAdvertisingParams(advParams);
vcoubard 1131:692ddf04fc42 405 }
vcoubard 1131:692ddf04fc42 406
vcoubard 1131:692ddf04fc42 407 /**
vcoubard 1131:692ddf04fc42 408 * @return Read back advertising parameters. Useful for storing and
vcoubard 1131:692ddf04fc42 409 * restoring parameters rapidly.
vcoubard 1131:692ddf04fc42 410 *
vcoubard 1142:a358d0d20f62 411 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 412 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 413 * ble.getAdvertisingParams(...) should be replaced with
vcoubard 1131:692ddf04fc42 414 * ble.gap().getAdvertisingParams(...).
vcoubard 1131:692ddf04fc42 415 */
vcoubard 1131:692ddf04fc42 416 const GapAdvertisingParams &getAdvertisingParams(void) const {
vcoubard 1131:692ddf04fc42 417 return gap().getAdvertisingParams();
vcoubard 1131:692ddf04fc42 418 }
vcoubard 1131:692ddf04fc42 419
vcoubard 1131:692ddf04fc42 420 /**
vcoubard 1131:692ddf04fc42 421 * Accumulate an AD structure in the advertising payload. Please note that
vcoubard 1131:692ddf04fc42 422 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1131:692ddf04fc42 423 * as an additional 31 bytes if the advertising payload is too
vcoubard 1131:692ddf04fc42 424 * small.
vcoubard 1131:692ddf04fc42 425 *
vcoubard 1131:692ddf04fc42 426 * @param[in] flags
vcoubard 1131:692ddf04fc42 427 * The flags to add. Please refer to
vcoubard 1131:692ddf04fc42 428 * GapAdvertisingData::Flags for valid flags. Multiple
vcoubard 1131:692ddf04fc42 429 * flags may be specified in combination.
vcoubard 1131:692ddf04fc42 430 *
vcoubard 1142:a358d0d20f62 431 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 432 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 433 * ble.accumulateAdvertisingPayload(flags) should be replaced with
vcoubard 1131:692ddf04fc42 434 * ble.gap().accumulateAdvertisingPayload(flags).
vcoubard 1131:692ddf04fc42 435 */
vcoubard 1131:692ddf04fc42 436 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
vcoubard 1131:692ddf04fc42 437 return gap().accumulateAdvertisingPayload(flags);
vcoubard 1131:692ddf04fc42 438 }
vcoubard 1131:692ddf04fc42 439
vcoubard 1131:692ddf04fc42 440 /**
vcoubard 1131:692ddf04fc42 441 * Accumulate an AD structure in the advertising payload. Please note that
vcoubard 1131:692ddf04fc42 442 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1131:692ddf04fc42 443 * as an additional 31 bytes if the advertising payload is too
vcoubard 1131:692ddf04fc42 444 * small.
vcoubard 1131:692ddf04fc42 445 *
vcoubard 1131:692ddf04fc42 446 * @param[in] app
vcoubard 1131:692ddf04fc42 447 * The appearance of the peripheral.
vcoubard 1131:692ddf04fc42 448 *
vcoubard 1142:a358d0d20f62 449 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 450 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 451 * ble.accumulateAdvertisingPayload(appearance) should be replaced with
vcoubard 1131:692ddf04fc42 452 * ble.gap().accumulateAdvertisingPayload(appearance).
vcoubard 1131:692ddf04fc42 453 */
vcoubard 1131:692ddf04fc42 454 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
vcoubard 1131:692ddf04fc42 455 return gap().accumulateAdvertisingPayload(app);
vcoubard 1131:692ddf04fc42 456 }
vcoubard 1131:692ddf04fc42 457
vcoubard 1131:692ddf04fc42 458 /**
vcoubard 1131:692ddf04fc42 459 * Accumulate an AD structure in the advertising payload. Please note that
vcoubard 1131:692ddf04fc42 460 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1131:692ddf04fc42 461 * as an additional 31 bytes if the advertising payload is too
vcoubard 1131:692ddf04fc42 462 * small.
vcoubard 1131:692ddf04fc42 463 *
vcoubard 1142:a358d0d20f62 464 * @param[in] power
vcoubard 1131:692ddf04fc42 465 * The max transmit power to be used by the controller. This
vcoubard 1131:692ddf04fc42 466 * is only a hint.
vcoubard 1131:692ddf04fc42 467 *
vcoubard 1142:a358d0d20f62 468 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 469 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 470 * ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
vcoubard 1131:692ddf04fc42 471 * ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
vcoubard 1131:692ddf04fc42 472 */
vcoubard 1131:692ddf04fc42 473 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
vcoubard 1131:692ddf04fc42 474 return gap().accumulateAdvertisingPayloadTxPower(power);
vcoubard 1131:692ddf04fc42 475 }
vcoubard 1131:692ddf04fc42 476
vcoubard 1131:692ddf04fc42 477 /**
vcoubard 1131:692ddf04fc42 478 * Accumulate a variable length byte-stream as an AD structure in the
vcoubard 1131:692ddf04fc42 479 * advertising payload. Please note that the payload is limited to 31 bytes.
vcoubard 1131:692ddf04fc42 480 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
vcoubard 1131:692ddf04fc42 481 * advertising payload is too small.
vcoubard 1131:692ddf04fc42 482 *
vcoubard 1131:692ddf04fc42 483 * @param type The type that describes the variable length data.
vcoubard 1131:692ddf04fc42 484 * @param data Data bytes.
vcoubard 1131:692ddf04fc42 485 * @param len Data length.
vcoubard 1131:692ddf04fc42 486 *
vcoubard 1142:a358d0d20f62 487 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 488 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 489 * ble.accumulateAdvertisingPayload(...) should be replaced with
vcoubard 1131:692ddf04fc42 490 * ble.gap().accumulateAdvertisingPayload(...).
vcoubard 1131:692ddf04fc42 491 */
vcoubard 1131:692ddf04fc42 492 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard 1131:692ddf04fc42 493 return gap().accumulateAdvertisingPayload(type, data, len);
vcoubard 1131:692ddf04fc42 494 }
vcoubard 1131:692ddf04fc42 495
vcoubard 1131:692ddf04fc42 496 /**
vcoubard 1131:692ddf04fc42 497 * Setup a particular, user-constructed advertisement payload for the
vcoubard 1131:692ddf04fc42 498 * underlying stack. It would be uncommon for this API to be used directly;
vcoubard 1131:692ddf04fc42 499 * there are other APIs to build an advertisement payload (see above).
vcoubard 1131:692ddf04fc42 500 *
vcoubard 1142:a358d0d20f62 501 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 502 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 503 * ble.setAdvertisingData(...) should be replaced with
vcoubard 1131:692ddf04fc42 504 * ble.gap().setAdvertisingPayload(...).
vcoubard 1131:692ddf04fc42 505 */
vcoubard 1131:692ddf04fc42 506 ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
vcoubard 1131:692ddf04fc42 507 return gap().setAdvertisingPayload(advData);
vcoubard 1131:692ddf04fc42 508 }
vcoubard 1131:692ddf04fc42 509
vcoubard 1131:692ddf04fc42 510 /**
vcoubard 1131:692ddf04fc42 511 * @return Read back advertising data. Useful for storing and
vcoubard 1131:692ddf04fc42 512 * restoring payload.
vcoubard 1131:692ddf04fc42 513 *
vcoubard 1142:a358d0d20f62 514 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 515 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 516 * ble.getAdvertisingData(...) should be replaced with
vcoubard 1131:692ddf04fc42 517 * ble.gap().getAdvertisingPayload()(...).
vcoubard 1131:692ddf04fc42 518 */
vcoubard 1131:692ddf04fc42 519 const GapAdvertisingData &getAdvertisingData(void) const {
vcoubard 1131:692ddf04fc42 520 return gap().getAdvertisingPayload();
vcoubard 1131:692ddf04fc42 521 }
vcoubard 1131:692ddf04fc42 522
vcoubard 1131:692ddf04fc42 523 /**
vcoubard 1131:692ddf04fc42 524 * Reset any advertising payload prepared from prior calls to
vcoubard 1131:692ddf04fc42 525 * accumulateAdvertisingPayload(). This automatically propagates the re-
vcoubard 1131:692ddf04fc42 526 * initialized advertising payload to the underlying stack.
vcoubard 1131:692ddf04fc42 527 *
vcoubard 1142:a358d0d20f62 528 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 529 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 530 * ble.clearAdvertisingPayload(...) should be replaced with
vcoubard 1131:692ddf04fc42 531 * ble.gap().clearAdvertisingPayload(...).
vcoubard 1131:692ddf04fc42 532 */
vcoubard 1131:692ddf04fc42 533 void clearAdvertisingPayload(void) {
vcoubard 1131:692ddf04fc42 534 gap().clearAdvertisingPayload();
vcoubard 1131:692ddf04fc42 535 }
vcoubard 1131:692ddf04fc42 536
vcoubard 1131:692ddf04fc42 537 /**
vcoubard 1131:692ddf04fc42 538 * This API is *deprecated* and resolves to a no-operation. It is left here
vcoubard 1131:692ddf04fc42 539 * to allow older code to compile. Please avoid using this API in new code.
vcoubard 1131:692ddf04fc42 540 * This API will be dropped in a future release.
vcoubard 1131:692ddf04fc42 541 *
vcoubard 1131:692ddf04fc42 542 * Formerly, it would be used to dynamically reset the accumulated advertising
vcoubard 1131:692ddf04fc42 543 * payload and scanResponse; to do this, the application would clear and re-
vcoubard 1131:692ddf04fc42 544 * accumulate a new advertising payload (and scanResponse) before using this
vcoubard 1131:692ddf04fc42 545 * API. Updates to the underlying advertisement payload now happen
vcoubard 1131:692ddf04fc42 546 * implicitly.
vcoubard 1131:692ddf04fc42 547 */
vcoubard 1131:692ddf04fc42 548 ble_error_t setAdvertisingPayload(void) {
vcoubard 1131:692ddf04fc42 549 return BLE_ERROR_NONE;
vcoubard 1131:692ddf04fc42 550 }
vcoubard 1131:692ddf04fc42 551
vcoubard 1131:692ddf04fc42 552 /**
vcoubard 1131:692ddf04fc42 553 * Accumulate a variable length byte-stream as an AD structure in the
vcoubard 1131:692ddf04fc42 554 * scanResponse payload.
vcoubard 1131:692ddf04fc42 555 *
vcoubard 1131:692ddf04fc42 556 * @param[in] type The type that describes the variable length data.
vcoubard 1131:692ddf04fc42 557 * @param[in] data Data bytes.
vcoubard 1131:692ddf04fc42 558 * @param[in] len Data length.
vcoubard 1131:692ddf04fc42 559 *
vcoubard 1142:a358d0d20f62 560 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 561 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 562 * ble.accumulateScanResponse(...) should be replaced with
vcoubard 1131:692ddf04fc42 563 * ble.gap().accumulateScanResponse(...).
vcoubard 1131:692ddf04fc42 564 */
vcoubard 1131:692ddf04fc42 565 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard 1131:692ddf04fc42 566 return gap().accumulateScanResponse(type, data, len);
vcoubard 1131:692ddf04fc42 567 }
vcoubard 1131:692ddf04fc42 568
vcoubard 1131:692ddf04fc42 569 /**
vcoubard 1131:692ddf04fc42 570 * Reset any scan response prepared from prior calls to
vcoubard 1131:692ddf04fc42 571 * accumulateScanResponse().
vcoubard 1131:692ddf04fc42 572 *
vcoubard 1142:a358d0d20f62 573 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 574 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 575 * ble.clearScanResponse(...) should be replaced with
vcoubard 1131:692ddf04fc42 576 * ble.gap().clearScanResponse(...).
vcoubard 1131:692ddf04fc42 577 */
vcoubard 1131:692ddf04fc42 578 void clearScanResponse(void) {
vcoubard 1131:692ddf04fc42 579 gap().clearScanResponse();
vcoubard 1131:692ddf04fc42 580 }
vcoubard 1131:692ddf04fc42 581
vcoubard 1131:692ddf04fc42 582 /**
vcoubard 1131:692ddf04fc42 583 * Start advertising.
vcoubard 1131:692ddf04fc42 584 *
vcoubard 1142:a358d0d20f62 585 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 586 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 587 * ble.startAdvertising(...) should be replaced with
vcoubard 1131:692ddf04fc42 588 * ble.gap().startAdvertising(...).
vcoubard 1131:692ddf04fc42 589 */
vcoubard 1131:692ddf04fc42 590 ble_error_t startAdvertising(void) {
vcoubard 1131:692ddf04fc42 591 return gap().startAdvertising();
vcoubard 1131:692ddf04fc42 592 }
vcoubard 1131:692ddf04fc42 593
vcoubard 1131:692ddf04fc42 594 /**
vcoubard 1131:692ddf04fc42 595 * Stop advertising.
vcoubard 1131:692ddf04fc42 596 *
vcoubard 1142:a358d0d20f62 597 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 598 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 599 * ble.stopAdvertising(...) should be replaced with
vcoubard 1131:692ddf04fc42 600 * ble.gap().stopAdvertising(...).
vcoubard 1131:692ddf04fc42 601 */
vcoubard 1131:692ddf04fc42 602 ble_error_t stopAdvertising(void) {
vcoubard 1131:692ddf04fc42 603 return gap().stopAdvertising();
vcoubard 1131:692ddf04fc42 604 }
vcoubard 1131:692ddf04fc42 605
vcoubard 1131:692ddf04fc42 606 /**
vcoubard 1131:692ddf04fc42 607 * Set up parameters for GAP scanning (observer mode).
vcoubard 1131:692ddf04fc42 608 * @param[in] interval
vcoubard 1131:692ddf04fc42 609 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard 1131:692ddf04fc42 610 * @param[in] window
vcoubard 1131:692ddf04fc42 611 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard 1131:692ddf04fc42 612 * @param[in] timeout
vcoubard 1131:692ddf04fc42 613 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
vcoubard 1131:692ddf04fc42 614 * @param[in] activeScanning
vcoubard 1131:692ddf04fc42 615 * Set to True if active-scanning is required. This is used to fetch the
vcoubard 1131:692ddf04fc42 616 * scan response from a peer if possible.
vcoubard 1131:692ddf04fc42 617 *
vcoubard 1131:692ddf04fc42 618 * The scanning window divided by the interval determines the duty cycle for
vcoubard 1131:692ddf04fc42 619 * scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard 1131:692ddf04fc42 620 * then the controller will scan for 10 percent of the time. It is possible
vcoubard 1131:692ddf04fc42 621 * to have the interval and window set to the same value. In this case,
vcoubard 1131:692ddf04fc42 622 * scanning is continuous, with a change of scanning frequency once every
vcoubard 1131:692ddf04fc42 623 * interval.
vcoubard 1131:692ddf04fc42 624 *
vcoubard 1131:692ddf04fc42 625 * Once the scanning parameters have been configured, scanning can be
vcoubard 1131:692ddf04fc42 626 * enabled by using startScan().
vcoubard 1131:692ddf04fc42 627 *
vcoubard 1142:a358d0d20f62 628 * @note The scan interval and window are recommendations to the BLE stack.
vcoubard 1131:692ddf04fc42 629 *
vcoubard 1142:a358d0d20f62 630 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 631 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 632 * ble.setScanParams(...) should be replaced with
vcoubard 1131:692ddf04fc42 633 * ble.gap().setScanParams(...).
vcoubard 1131:692ddf04fc42 634 */
vcoubard 1131:692ddf04fc42 635 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
vcoubard 1131:692ddf04fc42 636 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
vcoubard 1131:692ddf04fc42 637 uint16_t timeout = 0,
vcoubard 1131:692ddf04fc42 638 bool activeScanning = false) {
vcoubard 1131:692ddf04fc42 639 return gap().setScanParams(interval, window, timeout, activeScanning);
vcoubard 1131:692ddf04fc42 640 }
vcoubard 1131:692ddf04fc42 641
vcoubard 1131:692ddf04fc42 642 /**
vcoubard 1131:692ddf04fc42 643 * Set up the scanInterval parameter for GAP scanning (observer mode).
vcoubard 1131:692ddf04fc42 644 * @param[in] interval
vcoubard 1131:692ddf04fc42 645 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard 1131:692ddf04fc42 646 *
vcoubard 1131:692ddf04fc42 647 * The scanning window divided by the interval determines the duty cycle for
vcoubard 1131:692ddf04fc42 648 * scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard 1131:692ddf04fc42 649 * then the controller will scan for 10 percent of the time. It is possible
vcoubard 1131:692ddf04fc42 650 * to have the interval and window set to the same value. In this case,
vcoubard 1131:692ddf04fc42 651 * scanning is continuous, with a change of scanning frequency once every
vcoubard 1131:692ddf04fc42 652 * interval.
vcoubard 1131:692ddf04fc42 653 *
vcoubard 1131:692ddf04fc42 654 * Once the scanning parameters have been configured, scanning can be
vcoubard 1131:692ddf04fc42 655 * enabled by using startScan().
vcoubard 1131:692ddf04fc42 656 *
vcoubard 1142:a358d0d20f62 657 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 658 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 659 * ble.setScanInterval(interval) should be replaced with
vcoubard 1131:692ddf04fc42 660 * ble.gap().setScanInterval(interval).
vcoubard 1131:692ddf04fc42 661 */
vcoubard 1131:692ddf04fc42 662 ble_error_t setScanInterval(uint16_t interval) {
vcoubard 1131:692ddf04fc42 663 return gap().setScanInterval(interval);
vcoubard 1131:692ddf04fc42 664 }
vcoubard 1131:692ddf04fc42 665
vcoubard 1131:692ddf04fc42 666 /**
vcoubard 1131:692ddf04fc42 667 * Set up the scanWindow parameter for GAP scanning (observer mode).
vcoubard 1131:692ddf04fc42 668 * @param[in] window
vcoubard 1131:692ddf04fc42 669 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard 1131:692ddf04fc42 670 *
vcoubard 1131:692ddf04fc42 671 * The scanning window divided by the interval determines the duty cycle for
vcoubard 1131:692ddf04fc42 672 * scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard 1131:692ddf04fc42 673 * then the controller will scan for 10 percent of the time. It is possible
vcoubard 1131:692ddf04fc42 674 * to have the interval and window set to the same value. In this case,
vcoubard 1131:692ddf04fc42 675 * scanning is continuous, with a change of scanning frequency once every
vcoubard 1131:692ddf04fc42 676 * interval.
vcoubard 1131:692ddf04fc42 677 *
vcoubard 1131:692ddf04fc42 678 * Once the scanning parameters have been configured, scanning can be
vcoubard 1131:692ddf04fc42 679 * enabled by using startScan().
vcoubard 1131:692ddf04fc42 680 *
vcoubard 1142:a358d0d20f62 681 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 682 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 683 * ble.setScanWindow(window) should be replaced with
vcoubard 1131:692ddf04fc42 684 * ble.gap().setScanWindow(window).
vcoubard 1131:692ddf04fc42 685 */
vcoubard 1131:692ddf04fc42 686 ble_error_t setScanWindow(uint16_t window) {
vcoubard 1131:692ddf04fc42 687 return gap().setScanWindow(window);
vcoubard 1131:692ddf04fc42 688 }
vcoubard 1131:692ddf04fc42 689
vcoubard 1131:692ddf04fc42 690 /**
vcoubard 1131:692ddf04fc42 691 * Set up parameters for GAP scanning (observer mode).
vcoubard 1131:692ddf04fc42 692 * @param[in] timeout
vcoubard 1131:692ddf04fc42 693 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
vcoubard 1131:692ddf04fc42 694 *
vcoubard 1131:692ddf04fc42 695 * The scanning window divided by the interval determines the duty cycle for
vcoubard 1131:692ddf04fc42 696 * scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard 1131:692ddf04fc42 697 * then the controller will scan for 10 percent of the time. It is possible
vcoubard 1131:692ddf04fc42 698 * to have the interval and window set to the same value. In this case,
vcoubard 1131:692ddf04fc42 699 * scanning is continuous, with a change of scanning frequency once every
vcoubard 1131:692ddf04fc42 700 * interval.
vcoubard 1131:692ddf04fc42 701 *
vcoubard 1131:692ddf04fc42 702 * Once the scanning parameters have been configured, scanning can be
vcoubard 1131:692ddf04fc42 703 * enabled by using startScan().
vcoubard 1131:692ddf04fc42 704 *
vcoubard 1142:a358d0d20f62 705 * @note The scan interval and window are recommendations to the BLE stack.
vcoubard 1131:692ddf04fc42 706 *
vcoubard 1142:a358d0d20f62 707 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 708 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 709 * ble.setScanTimeout(...) should be replaced with
vcoubard 1131:692ddf04fc42 710 * ble.gap().setScanTimeout(...).
vcoubard 1131:692ddf04fc42 711 */
vcoubard 1131:692ddf04fc42 712 ble_error_t setScanTimeout(uint16_t timeout) {
vcoubard 1131:692ddf04fc42 713 return gap().setScanTimeout(timeout);
vcoubard 1131:692ddf04fc42 714 }
vcoubard 1131:692ddf04fc42 715
vcoubard 1131:692ddf04fc42 716 /**
vcoubard 1131:692ddf04fc42 717 * Set up parameters for GAP scanning (observer mode).
vcoubard 1131:692ddf04fc42 718 * @param[in] activeScanning
vcoubard 1131:692ddf04fc42 719 * Set to True if active-scanning is required. This is used to fetch the
vcoubard 1131:692ddf04fc42 720 * scan response from a peer if possible.
vcoubard 1131:692ddf04fc42 721 *
vcoubard 1131:692ddf04fc42 722 * Once the scanning parameters have been configured, scanning can be
vcoubard 1131:692ddf04fc42 723 * enabled by using startScan().
vcoubard 1131:692ddf04fc42 724 *
vcoubard 1142:a358d0d20f62 725 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 726 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 727 * ble.setActiveScan(...) should be replaced with
vcoubard 1131:692ddf04fc42 728 * ble.gap().setActiveScanning(...).
vcoubard 1131:692ddf04fc42 729 */
vcoubard 1131:692ddf04fc42 730 void setActiveScan(bool activeScanning) {
vcoubard 1131:692ddf04fc42 731 gap().setActiveScanning(activeScanning);
vcoubard 1131:692ddf04fc42 732 }
vcoubard 1131:692ddf04fc42 733
vcoubard 1131:692ddf04fc42 734 /**
vcoubard 1131:692ddf04fc42 735 * Start scanning (Observer Procedure) based on the parameters currently in
vcoubard 1131:692ddf04fc42 736 * effect.
vcoubard 1131:692ddf04fc42 737 *
vcoubard 1131:692ddf04fc42 738 * @param[in] callback
vcoubard 1131:692ddf04fc42 739 * The application-specific callback to be invoked upon
vcoubard 1131:692ddf04fc42 740 * receiving every advertisement report. This can be passed in
vcoubard 1131:692ddf04fc42 741 * as NULL, in which case scanning may not be enabled at all.
vcoubard 1131:692ddf04fc42 742 *
vcoubard 1142:a358d0d20f62 743 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 744 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 745 * ble.startScan(callback) should be replaced with
vcoubard 1131:692ddf04fc42 746 * ble.gap().startScan(callback).
vcoubard 1131:692ddf04fc42 747 */
vcoubard 1131:692ddf04fc42 748 ble_error_t startScan(void (*callback)(const Gap::AdvertisementCallbackParams_t *params)) {
vcoubard 1131:692ddf04fc42 749 return gap().startScan(callback);
vcoubard 1131:692ddf04fc42 750 }
vcoubard 1131:692ddf04fc42 751
vcoubard 1131:692ddf04fc42 752 /**
vcoubard 1131:692ddf04fc42 753 * Same as above, but this takes an (object, method) pair for a callback.
vcoubard 1131:692ddf04fc42 754 *
vcoubard 1142:a358d0d20f62 755 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 756 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 757 * ble.startScan(callback) should be replaced with
vcoubard 1131:692ddf04fc42 758 * ble.gap().startScan(object, callback).
vcoubard 1131:692ddf04fc42 759 */
vcoubard 1131:692ddf04fc42 760 template<typename T>
vcoubard 1131:692ddf04fc42 761 ble_error_t startScan(T *object, void (T::*memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
vcoubard 1131:692ddf04fc42 762
vcoubard 1131:692ddf04fc42 763 /**
vcoubard 1131:692ddf04fc42 764 * Stop scanning. The current scanning parameters remain in effect.
vcoubard 1131:692ddf04fc42 765 *
vcoubard 1131:692ddf04fc42 766 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
vcoubard 1131:692ddf04fc42 767 *
vcoubard 1142:a358d0d20f62 768 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 769 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 770 * ble.stopScan() should be replaced with
vcoubard 1131:692ddf04fc42 771 * ble.gap().stopScan().
vcoubard 1131:692ddf04fc42 772 */
vcoubard 1131:692ddf04fc42 773 ble_error_t stopScan(void) {
vcoubard 1131:692ddf04fc42 774 return gap().stopScan();
vcoubard 1131:692ddf04fc42 775 }
vcoubard 1131:692ddf04fc42 776
vcoubard 1131:692ddf04fc42 777 /**
vcoubard 1131:692ddf04fc42 778 * Create a connection (GAP Link Establishment).
vcoubard 1131:692ddf04fc42 779 * @param peerAddr
vcoubard 1131:692ddf04fc42 780 * 48-bit address, LSB format.
vcoubard 1131:692ddf04fc42 781 * @param peerAddrType
vcoubard 1131:692ddf04fc42 782 * Address type of the peer.
vcoubard 1131:692ddf04fc42 783 * @param connectionParams
vcoubard 1131:692ddf04fc42 784 * Connection parameters.
vcoubard 1131:692ddf04fc42 785 * @param scanParams
vcoubard 1131:692ddf04fc42 786 * Paramters to use while scanning for the peer.
vcoubard 1131:692ddf04fc42 787 * @return BLE_ERROR_NONE if connection establishment procedure is started
vcoubard 1131:692ddf04fc42 788 * successfully. The onConnection callback (if set) is invoked upon
vcoubard 1131:692ddf04fc42 789 * a connection event.
vcoubard 1131:692ddf04fc42 790 *
vcoubard 1142:a358d0d20f62 791 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 792 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 793 * ble.connect(...) should be replaced with
vcoubard 1131:692ddf04fc42 794 * ble.gap().connect(...).
vcoubard 1131:692ddf04fc42 795 */
vcoubard 1135:22aada733dbd 796 ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard 1135:22aada733dbd 797 BLEProtocol::AddressType_t peerAddrType = BLEProtocol::AddressType::RANDOM_STATIC,
vcoubard 1135:22aada733dbd 798 const Gap::ConnectionParams_t *connectionParams = NULL,
vcoubard 1135:22aada733dbd 799 const GapScanningParams *scanParams = NULL) {
vcoubard 1131:692ddf04fc42 800 return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
vcoubard 1131:692ddf04fc42 801 }
vcoubard 1131:692ddf04fc42 802
vcoubard 1131:692ddf04fc42 803 /**
vcoubard 1131:692ddf04fc42 804 * This call initiates the disconnection procedure, and its completion is
vcoubard 1131:692ddf04fc42 805 * communicated to the application with an invocation of the
vcoubard 1131:692ddf04fc42 806 * onDisconnection callback.
vcoubard 1131:692ddf04fc42 807 *
vcoubard 1131:692ddf04fc42 808 * @param[in] connectionHandle
vcoubard 1131:692ddf04fc42 809 * @param[in] reason
vcoubard 1131:692ddf04fc42 810 * The reason for disconnection; sent back to the peer.
vcoubard 1131:692ddf04fc42 811 */
vcoubard 1131:692ddf04fc42 812 ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
vcoubard 1131:692ddf04fc42 813 return gap().disconnect(connectionHandle, reason);
vcoubard 1131:692ddf04fc42 814 }
vcoubard 1131:692ddf04fc42 815
vcoubard 1131:692ddf04fc42 816 /**
vcoubard 1135:22aada733dbd 817 * This call initiates the disconnection procedure, and its completion
vcoubard 1131:692ddf04fc42 818 * is communicated to the application with an invocation of the
vcoubard 1131:692ddf04fc42 819 * onDisconnection callback.
vcoubard 1131:692ddf04fc42 820 *
vcoubard 1131:692ddf04fc42 821 * @param reason
vcoubard 1131:692ddf04fc42 822 * The reason for disconnection; sent back to the peer.
vcoubard 1131:692ddf04fc42 823 *
vcoubard 1142:a358d0d20f62 824 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 825 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 826 * ble.disconnect(reason) should be replaced with
vcoubard 1131:692ddf04fc42 827 * ble.gap().disconnect(reason).
vcoubard 1131:692ddf04fc42 828 *
vcoubard 1142:a358d0d20f62 829 * @note This version of disconnect() doesn't take a connection handle. It
vcoubard 1131:692ddf04fc42 830 * works reliably only for stacks that are limited to a single
vcoubard 1131:692ddf04fc42 831 * connection. This API should be considered *deprecated* in favour of the
vcoubard 1131:692ddf04fc42 832 * alternative, which takes a connection handle. It will be dropped in the future.
vcoubard 1131:692ddf04fc42 833 */
vcoubard 1131:692ddf04fc42 834 ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
vcoubard 1131:692ddf04fc42 835 return gap().disconnect(reason);
vcoubard 1131:692ddf04fc42 836 }
vcoubard 1131:692ddf04fc42 837
vcoubard 1131:692ddf04fc42 838 /**
vcoubard 1142:a358d0d20f62 839 * Returns the current Gap state of the device using a bitmask that
vcoubard 1131:692ddf04fc42 840 * describes whether the device is advertising or connected.
vcoubard 1131:692ddf04fc42 841 *
vcoubard 1142:a358d0d20f62 842 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 843 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 844 * ble.getGapState() should be replaced with
vcoubard 1131:692ddf04fc42 845 * ble.gap().getState().
vcoubard 1131:692ddf04fc42 846 */
vcoubard 1131:692ddf04fc42 847 Gap::GapState_t getGapState(void) const {
vcoubard 1131:692ddf04fc42 848 return gap().getState();
vcoubard 1131:692ddf04fc42 849 }
vcoubard 1131:692ddf04fc42 850
vcoubard 1131:692ddf04fc42 851 /**
vcoubard 1131:692ddf04fc42 852 * Get the GAP peripheral's preferred connection parameters. These are the
vcoubard 1131:692ddf04fc42 853 * defaults that the peripheral would like to have in a connection. The
vcoubard 1131:692ddf04fc42 854 * choice of the connection parameters is eventually up to the central.
vcoubard 1131:692ddf04fc42 855 *
vcoubard 1131:692ddf04fc42 856 * @param[out] params
vcoubard 1131:692ddf04fc42 857 * The structure where the parameters will be stored. Memory
vcoubard 1131:692ddf04fc42 858 * for this is owned by the caller.
vcoubard 1131:692ddf04fc42 859 *
vcoubard 1131:692ddf04fc42 860 * @return BLE_ERROR_NONE if the parameters were successfully filled into
vcoubard 1131:692ddf04fc42 861 * the given structure pointed to by params.
vcoubard 1131:692ddf04fc42 862 *
vcoubard 1142:a358d0d20f62 863 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 864 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 865 * ble.getPreferredConnectionParams() should be replaced with
vcoubard 1131:692ddf04fc42 866 * ble.gap().getPreferredConnectionParams().
vcoubard 1131:692ddf04fc42 867 */
vcoubard 1131:692ddf04fc42 868 ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
vcoubard 1131:692ddf04fc42 869 return gap().getPreferredConnectionParams(params);
vcoubard 1131:692ddf04fc42 870 }
vcoubard 1131:692ddf04fc42 871
vcoubard 1131:692ddf04fc42 872 /**
vcoubard 1131:692ddf04fc42 873 * Set the GAP peripheral's preferred connection parameters. These are the
vcoubard 1131:692ddf04fc42 874 * defaults that the peripheral would like to have in a connection. The
vcoubard 1131:692ddf04fc42 875 * choice of the connection parameters is eventually up to the central.
vcoubard 1131:692ddf04fc42 876 *
vcoubard 1131:692ddf04fc42 877 * @param[in] params
vcoubard 1131:692ddf04fc42 878 * The structure containing the desired parameters.
vcoubard 1131:692ddf04fc42 879 *
vcoubard 1142:a358d0d20f62 880 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 881 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 882 * ble.setPreferredConnectionParams() should be replaced with
vcoubard 1131:692ddf04fc42 883 * ble.gap().setPreferredConnectionParams().
vcoubard 1131:692ddf04fc42 884 */
vcoubard 1131:692ddf04fc42 885 ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
vcoubard 1131:692ddf04fc42 886 return gap().setPreferredConnectionParams(params);
vcoubard 1131:692ddf04fc42 887 }
vcoubard 1131:692ddf04fc42 888
vcoubard 1131:692ddf04fc42 889 /**
vcoubard 1131:692ddf04fc42 890 * Update connection parameters while in the peripheral role.
vcoubard 1131:692ddf04fc42 891 * @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
vcoubard 1131:692ddf04fc42 892 * the central to perform the procedure.
vcoubard 1131:692ddf04fc42 893 * @param[in] handle
vcoubard 1131:692ddf04fc42 894 * Connection Handle
vcoubard 1131:692ddf04fc42 895 * @param[in] params
vcoubard 1131:692ddf04fc42 896 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
vcoubard 1131:692ddf04fc42 897 * the parameters in the PPCP characteristic of the GAP service will be used instead.
vcoubard 1131:692ddf04fc42 898 *
vcoubard 1142:a358d0d20f62 899 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 900 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 901 * ble.updateConnectionParams() should be replaced with
vcoubard 1131:692ddf04fc42 902 * ble.gap().updateConnectionParams().
vcoubard 1131:692ddf04fc42 903 */
vcoubard 1131:692ddf04fc42 904 ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
vcoubard 1131:692ddf04fc42 905 return gap().updateConnectionParams(handle, params);
vcoubard 1131:692ddf04fc42 906 }
vcoubard 1131:692ddf04fc42 907
vcoubard 1131:692ddf04fc42 908 /**
vcoubard 1142:a358d0d20f62 909 * Set the device name characteristic in the Gap service.
vcoubard 1131:692ddf04fc42 910 * @param[in] deviceName
vcoubard 1131:692ddf04fc42 911 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
vcoubard 1131:692ddf04fc42 912 *
vcoubard 1142:a358d0d20f62 913 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 914 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 915 * ble.setDeviceName() should be replaced with
vcoubard 1131:692ddf04fc42 916 * ble.gap().setDeviceName().
vcoubard 1131:692ddf04fc42 917 */
vcoubard 1131:692ddf04fc42 918 ble_error_t setDeviceName(const uint8_t *deviceName) {
vcoubard 1131:692ddf04fc42 919 return gap().setDeviceName(deviceName);
vcoubard 1131:692ddf04fc42 920 }
vcoubard 1131:692ddf04fc42 921
vcoubard 1131:692ddf04fc42 922 /**
vcoubard 1142:a358d0d20f62 923 * Get the value of the device name characteristic in the Gap service.
vcoubard 1131:692ddf04fc42 924 * @param[out] deviceName
vcoubard 1131:692ddf04fc42 925 * Pointer to an empty buffer where the UTF-8 *non NULL-
vcoubard 1131:692ddf04fc42 926 * terminated* string will be placed. Set this
vcoubard 1131:692ddf04fc42 927 * value to NULL in order to obtain the deviceName-length
vcoubard 1131:692ddf04fc42 928 * from the 'length' parameter.
vcoubard 1131:692ddf04fc42 929 *
vcoubard 1142:a358d0d20f62 930 * @param[in,out] lengthP
vcoubard 1131:692ddf04fc42 931 * (on input) Length of the buffer pointed to by deviceName;
vcoubard 1131:692ddf04fc42 932 * (on output) the complete device name length (without the
vcoubard 1131:692ddf04fc42 933 * null terminator).
vcoubard 1131:692ddf04fc42 934 *
vcoubard 1131:692ddf04fc42 935 * @note If the device name is longer than the size of the supplied buffer,
vcoubard 1131:692ddf04fc42 936 * length will return the complete device name length, and not the
vcoubard 1131:692ddf04fc42 937 * number of bytes actually returned in deviceName. The application may
vcoubard 1131:692ddf04fc42 938 * use this information to retry with a suitable buffer size.
vcoubard 1131:692ddf04fc42 939 *
vcoubard 1142:a358d0d20f62 940 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 941 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 942 * ble.getDeviceName() should be replaced with
vcoubard 1131:692ddf04fc42 943 * ble.gap().getDeviceName().
vcoubard 1131:692ddf04fc42 944 */
vcoubard 1131:692ddf04fc42 945 ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
vcoubard 1131:692ddf04fc42 946 return gap().getDeviceName(deviceName, lengthP);
vcoubard 1131:692ddf04fc42 947 }
vcoubard 1131:692ddf04fc42 948
vcoubard 1131:692ddf04fc42 949 /**
vcoubard 1142:a358d0d20f62 950 * Set the appearance characteristic in the Gap service.
vcoubard 1131:692ddf04fc42 951 * @param[in] appearance
vcoubard 1131:692ddf04fc42 952 * The new value for the device-appearance.
vcoubard 1131:692ddf04fc42 953 *
vcoubard 1142:a358d0d20f62 954 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 955 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 956 * ble.setAppearance() should be replaced with
vcoubard 1131:692ddf04fc42 957 * ble.gap().setAppearance().
vcoubard 1131:692ddf04fc42 958 */
vcoubard 1131:692ddf04fc42 959 ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
vcoubard 1131:692ddf04fc42 960 return gap().setAppearance(appearance);
vcoubard 1131:692ddf04fc42 961 }
vcoubard 1131:692ddf04fc42 962
vcoubard 1131:692ddf04fc42 963 /**
vcoubard 1142:a358d0d20f62 964 * Get the appearance characteristic in the Gap service.
vcoubard 1142:a358d0d20f62 965 * @param[out] appearanceP
vcoubard 1131:692ddf04fc42 966 * The new value for the device-appearance.
vcoubard 1131:692ddf04fc42 967 *
vcoubard 1142:a358d0d20f62 968 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 969 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 970 * ble.getAppearance() should be replaced with
vcoubard 1131:692ddf04fc42 971 * ble.gap().getAppearance().
vcoubard 1131:692ddf04fc42 972 */
vcoubard 1131:692ddf04fc42 973 ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
vcoubard 1131:692ddf04fc42 974 return gap().getAppearance(appearanceP);
vcoubard 1131:692ddf04fc42 975 }
vcoubard 1131:692ddf04fc42 976
vcoubard 1131:692ddf04fc42 977 /**
vcoubard 1131:692ddf04fc42 978 * Set the radio's transmit power.
vcoubard 1131:692ddf04fc42 979 * @param[in] txPower Radio transmit power in dBm.
vcoubard 1131:692ddf04fc42 980 *
vcoubard 1142:a358d0d20f62 981 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 982 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 983 * ble.setTxPower() should be replaced with
vcoubard 1131:692ddf04fc42 984 * ble.gap().setTxPower().
vcoubard 1131:692ddf04fc42 985 */
vcoubard 1131:692ddf04fc42 986 ble_error_t setTxPower(int8_t txPower) {
vcoubard 1131:692ddf04fc42 987 return gap().setTxPower(txPower);
vcoubard 1131:692ddf04fc42 988 }
vcoubard 1131:692ddf04fc42 989
vcoubard 1131:692ddf04fc42 990 /**
vcoubard 1131:692ddf04fc42 991 * Query the underlying stack for permitted arguments for setTxPower().
vcoubard 1131:692ddf04fc42 992 *
vcoubard 1131:692ddf04fc42 993 * @param[out] valueArrayPP
vcoubard 1131:692ddf04fc42 994 * Out parameter to receive the immutable array of Tx values.
vcoubard 1131:692ddf04fc42 995 * @param[out] countP
vcoubard 1131:692ddf04fc42 996 * Out parameter to receive the array's size.
vcoubard 1131:692ddf04fc42 997 *
vcoubard 1142:a358d0d20f62 998 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 999 * You should use the parallel API from Gap directly. A former call to
vcoubard 1131:692ddf04fc42 1000 * ble.getPermittedTxPowerValues() should be replaced with
vcoubard 1131:692ddf04fc42 1001 * ble.gap().getPermittedTxPowerValues().
vcoubard 1131:692ddf04fc42 1002 */
vcoubard 1131:692ddf04fc42 1003 void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
vcoubard 1131:692ddf04fc42 1004 gap().getPermittedTxPowerValues(valueArrayPP, countP);
vcoubard 1131:692ddf04fc42 1005 }
vcoubard 1131:692ddf04fc42 1006
vcoubard 1131:692ddf04fc42 1007 /**
vcoubard 1131:692ddf04fc42 1008 * Add a service declaration to the local server ATT table. Also add the
vcoubard 1131:692ddf04fc42 1009 * characteristics contained within.
vcoubard 1131:692ddf04fc42 1010 *
vcoubard 1142:a358d0d20f62 1011 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1012 * You should use the parallel API from GattServer directly. A former call
vcoubard 1131:692ddf04fc42 1013 * to ble.addService() should be replaced with
vcoubard 1131:692ddf04fc42 1014 * ble.gattServer().addService().
vcoubard 1131:692ddf04fc42 1015 */
vcoubard 1131:692ddf04fc42 1016 ble_error_t addService(GattService &service) {
vcoubard 1131:692ddf04fc42 1017 return gattServer().addService(service);
vcoubard 1131:692ddf04fc42 1018 }
vcoubard 1131:692ddf04fc42 1019
vcoubard 1131:692ddf04fc42 1020 /**
vcoubard 1131:692ddf04fc42 1021 * Read the value of a characteristic from the local GattServer.
vcoubard 1131:692ddf04fc42 1022 * @param[in] attributeHandle
vcoubard 1131:692ddf04fc42 1023 * Attribute handle for the value attribute of the characteristic.
vcoubard 1131:692ddf04fc42 1024 * @param[out] buffer
vcoubard 1131:692ddf04fc42 1025 * A buffer to hold the value being read.
vcoubard 1142:a358d0d20f62 1026 * @param[in,out] lengthP
vcoubard 1131:692ddf04fc42 1027 * Length of the buffer being supplied. If the attribute
vcoubard 1131:692ddf04fc42 1028 * value is longer than the size of the supplied buffer,
vcoubard 1131:692ddf04fc42 1029 * this variable will return the total attribute value length
vcoubard 1131:692ddf04fc42 1030 * (excluding offset). The application may use this
vcoubard 1131:692ddf04fc42 1031 * information to allocate a suitable buffer size.
vcoubard 1131:692ddf04fc42 1032 *
vcoubard 1131:692ddf04fc42 1033 * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
vcoubard 1131:692ddf04fc42 1034 *
vcoubard 1142:a358d0d20f62 1035 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1036 * You should use the parallel API from GattServer directly. A former call
vcoubard 1131:692ddf04fc42 1037 * to ble.readCharacteristicValue() should be replaced with
vcoubard 1131:692ddf04fc42 1038 * ble.gattServer().read().
vcoubard 1131:692ddf04fc42 1039 */
vcoubard 1131:692ddf04fc42 1040 ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
vcoubard 1131:692ddf04fc42 1041 return gattServer().read(attributeHandle, buffer, lengthP);
vcoubard 1131:692ddf04fc42 1042 }
vcoubard 1131:692ddf04fc42 1043
vcoubard 1131:692ddf04fc42 1044 /**
vcoubard 1131:692ddf04fc42 1045 * Read the value of a characteristic from the local GattServer.
vcoubard 1131:692ddf04fc42 1046 * @param[in] connectionHandle
vcoubard 1131:692ddf04fc42 1047 * Connection Handle.
vcoubard 1131:692ddf04fc42 1048 * @param[in] attributeHandle
vcoubard 1131:692ddf04fc42 1049 * Attribute handle for the value attribute of the characteristic.
vcoubard 1131:692ddf04fc42 1050 * @param[out] buffer
vcoubard 1131:692ddf04fc42 1051 * A buffer to hold the value being read.
vcoubard 1142:a358d0d20f62 1052 * @param[in,out] lengthP
vcoubard 1131:692ddf04fc42 1053 * Length of the buffer being supplied. If the attribute
vcoubard 1131:692ddf04fc42 1054 * value is longer than the size of the supplied buffer,
vcoubard 1131:692ddf04fc42 1055 * this variable will return the total attribute value length
vcoubard 1131:692ddf04fc42 1056 * (excluding offset). The application may use this
vcoubard 1131:692ddf04fc42 1057 * information to allocate a suitable buffer size.
vcoubard 1131:692ddf04fc42 1058 *
vcoubard 1131:692ddf04fc42 1059 * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
vcoubard 1131:692ddf04fc42 1060 *
vcoubard 1131:692ddf04fc42 1061 * @note This API is a version of the above, with an additional connection handle
vcoubard 1131:692ddf04fc42 1062 * parameter to allow fetches for connection-specific multivalued
vcoubard 1131:692ddf04fc42 1063 * attributes (such as the CCCDs).
vcoubard 1131:692ddf04fc42 1064 *
vcoubard 1142:a358d0d20f62 1065 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1066 * You should use the parallel API from GattServer directly. A former call
vcoubard 1131:692ddf04fc42 1067 * to ble.readCharacteristicValue() should be replaced with
vcoubard 1131:692ddf04fc42 1068 * ble.gattServer().read().
vcoubard 1131:692ddf04fc42 1069 */
vcoubard 1131:692ddf04fc42 1070 ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
vcoubard 1131:692ddf04fc42 1071 return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
vcoubard 1131:692ddf04fc42 1072 }
vcoubard 1131:692ddf04fc42 1073
vcoubard 1131:692ddf04fc42 1074 /**
vcoubard 1131:692ddf04fc42 1075 * Update the value of a characteristic on the local GattServer.
vcoubard 1131:692ddf04fc42 1076 *
vcoubard 1131:692ddf04fc42 1077 * @param[in] attributeHandle
vcoubard 1131:692ddf04fc42 1078 * Handle for the value attribute of the characteristic.
vcoubard 1131:692ddf04fc42 1079 * @param[in] value
vcoubard 1131:692ddf04fc42 1080 * A pointer to a buffer holding the new value.
vcoubard 1131:692ddf04fc42 1081 * @param[in] size
vcoubard 1131:692ddf04fc42 1082 * Size of the new value (in bytes).
vcoubard 1131:692ddf04fc42 1083 * @param[in] localOnly
vcoubard 1131:692ddf04fc42 1084 * Should this update be kept on the local
vcoubard 1131:692ddf04fc42 1085 * GattServer regardless of the state of the
vcoubard 1131:692ddf04fc42 1086 * notify/indicate flag in the CCCD for this
vcoubard 1131:692ddf04fc42 1087 * characteristic? If set to true, no notification
vcoubard 1131:692ddf04fc42 1088 * or indication is generated.
vcoubard 1131:692ddf04fc42 1089 *
vcoubard 1131:692ddf04fc42 1090 * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
vcoubard 1131:692ddf04fc42 1091 *
vcoubard 1142:a358d0d20f62 1092 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1093 * You should use the parallel API from GattServer directly. A former call
vcoubard 1131:692ddf04fc42 1094 * to ble.updateCharacteristicValue() should be replaced with
vcoubard 1131:692ddf04fc42 1095 * ble.gattServer().write().
vcoubard 1131:692ddf04fc42 1096 */
vcoubard 1131:692ddf04fc42 1097 ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
vcoubard 1131:692ddf04fc42 1098 const uint8_t *value,
vcoubard 1131:692ddf04fc42 1099 uint16_t size,
vcoubard 1131:692ddf04fc42 1100 bool localOnly = false) {
vcoubard 1131:692ddf04fc42 1101 return gattServer().write(attributeHandle, value, size, localOnly);
vcoubard 1131:692ddf04fc42 1102 }
vcoubard 1131:692ddf04fc42 1103
vcoubard 1131:692ddf04fc42 1104 /**
vcoubard 1131:692ddf04fc42 1105 * Update the value of a characteristic on the local GattServer. A version
vcoubard 1131:692ddf04fc42 1106 * of the above, with a connection handle parameter to allow updates
vcoubard 1131:692ddf04fc42 1107 * for connection-specific multivalued attributes (such as the CCCDs).
vcoubard 1131:692ddf04fc42 1108 *
vcoubard 1131:692ddf04fc42 1109 * @param[in] connectionHandle
vcoubard 1131:692ddf04fc42 1110 * Connection Handle.
vcoubard 1131:692ddf04fc42 1111 * @param[in] attributeHandle
vcoubard 1131:692ddf04fc42 1112 * Handle for the value attribute of the Characteristic.
vcoubard 1131:692ddf04fc42 1113 * @param[in] value
vcoubard 1131:692ddf04fc42 1114 * A pointer to a buffer holding the new value.
vcoubard 1131:692ddf04fc42 1115 * @param[in] size
vcoubard 1131:692ddf04fc42 1116 * Size of the new value (in bytes).
vcoubard 1131:692ddf04fc42 1117 * @param[in] localOnly
vcoubard 1131:692ddf04fc42 1118 * Should this update be kept on the local
vcoubard 1131:692ddf04fc42 1119 * GattServer regardless of the state of the
vcoubard 1131:692ddf04fc42 1120 * notify/indicate flag in the CCCD for this
vcoubard 1131:692ddf04fc42 1121 * Characteristic? If set to true, no notification
vcoubard 1131:692ddf04fc42 1122 * or indication is generated.
vcoubard 1131:692ddf04fc42 1123 *
vcoubard 1131:692ddf04fc42 1124 * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
vcoubard 1131:692ddf04fc42 1125 *
vcoubard 1142:a358d0d20f62 1126 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1127 * You should use the parallel API from GattServer directly. A former call
vcoubard 1131:692ddf04fc42 1128 * to ble.updateCharacteristicValue() should be replaced with
vcoubard 1131:692ddf04fc42 1129 * ble.gattServer().write().
vcoubard 1131:692ddf04fc42 1130 */
vcoubard 1131:692ddf04fc42 1131 ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
vcoubard 1131:692ddf04fc42 1132 GattAttribute::Handle_t attributeHandle,
vcoubard 1131:692ddf04fc42 1133 const uint8_t *value,
vcoubard 1131:692ddf04fc42 1134 uint16_t size,
vcoubard 1131:692ddf04fc42 1135 bool localOnly = false) {
vcoubard 1131:692ddf04fc42 1136 return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
vcoubard 1131:692ddf04fc42 1137 }
vcoubard 1131:692ddf04fc42 1138
vcoubard 1131:692ddf04fc42 1139 /**
vcoubard 1131:692ddf04fc42 1140 * Enable the BLE stack's Security Manager. The Security Manager implements
vcoubard 1131:692ddf04fc42 1141 * the cryptographic algorithms and protocol exchanges that allow two
vcoubard 1131:692ddf04fc42 1142 * devices to securely exchange data and privately detect each other.
vcoubard 1131:692ddf04fc42 1143 * Calling this API is a prerequisite for encryption and pairing (bonding).
vcoubard 1131:692ddf04fc42 1144 *
vcoubard 1131:692ddf04fc42 1145 * @param[in] enableBonding Allow for bonding.
vcoubard 1131:692ddf04fc42 1146 * @param[in] requireMITM Require protection against man-in-the-middle attacks.
vcoubard 1131:692ddf04fc42 1147 * @param[in] iocaps To specify the I/O capabilities of this peripheral,
vcoubard 1131:692ddf04fc42 1148 * such as availability of a display or keyboard, to
vcoubard 1131:692ddf04fc42 1149 * support out-of-band exchanges of security data.
vcoubard 1131:692ddf04fc42 1150 * @param[in] passkey To specify a static passkey.
vcoubard 1131:692ddf04fc42 1151 *
vcoubard 1131:692ddf04fc42 1152 * @return BLE_ERROR_NONE on success.
vcoubard 1131:692ddf04fc42 1153 *
vcoubard 1142:a358d0d20f62 1154 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1155 * You should use the parallel API from SecurityManager directly. A former
vcoubard 1131:692ddf04fc42 1156 * call to ble.initializeSecurity(...) should be replaced with
vcoubard 1131:692ddf04fc42 1157 * ble.securityManager().init(...).
vcoubard 1131:692ddf04fc42 1158 */
vcoubard 1131:692ddf04fc42 1159 ble_error_t initializeSecurity(bool enableBonding = true,
vcoubard 1131:692ddf04fc42 1160 bool requireMITM = true,
vcoubard 1131:692ddf04fc42 1161 SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
vcoubard 1131:692ddf04fc42 1162 const SecurityManager::Passkey_t passkey = NULL) {
vcoubard 1131:692ddf04fc42 1163 return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
vcoubard 1131:692ddf04fc42 1164 }
vcoubard 1131:692ddf04fc42 1165
vcoubard 1131:692ddf04fc42 1166 /**
vcoubard 1131:692ddf04fc42 1167 * Get the security status of a connection.
vcoubard 1131:692ddf04fc42 1168 *
vcoubard 1131:692ddf04fc42 1169 * @param[in] connectionHandle Handle to identify the connection.
vcoubard 1131:692ddf04fc42 1170 * @param[out] securityStatusP Security status.
vcoubard 1131:692ddf04fc42 1171 *
vcoubard 1131:692ddf04fc42 1172 * @return BLE_SUCCESS or appropriate error code indicating the reason of failure.
vcoubard 1131:692ddf04fc42 1173 *
vcoubard 1142:a358d0d20f62 1174 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1175 * You should use the parallel API from SecurityManager directly. A former
vcoubard 1131:692ddf04fc42 1176 * call to ble.getLinkSecurity(...) should be replaced with
vcoubard 1131:692ddf04fc42 1177 * ble.securityManager().getLinkSecurity(...).
vcoubard 1131:692ddf04fc42 1178 */
vcoubard 1131:692ddf04fc42 1179 ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
vcoubard 1131:692ddf04fc42 1180 return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
vcoubard 1131:692ddf04fc42 1181 }
vcoubard 1131:692ddf04fc42 1182
vcoubard 1131:692ddf04fc42 1183 /**
vcoubard 1131:692ddf04fc42 1184 * Delete all peer device context and all related bonding information from
vcoubard 1131:692ddf04fc42 1185 * the database within the security manager.
vcoubard 1131:692ddf04fc42 1186 *
vcoubard 1131:692ddf04fc42 1187 * @retval BLE_ERROR_NONE On success; else returns an error code indicating the reason for the failure.
vcoubard 1131:692ddf04fc42 1188 * @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization or
vcoubard 1131:692ddf04fc42 1189 * application registration.
vcoubard 1131:692ddf04fc42 1190 *
vcoubard 1142:a358d0d20f62 1191 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1192 * You should use the parallel API from SecurityManager directly. A former
vcoubard 1131:692ddf04fc42 1193 * call to ble.purgeAllBondingState() should be replaced with
vcoubard 1131:692ddf04fc42 1194 * ble.securityManager().purgeAllBondingState().
vcoubard 1131:692ddf04fc42 1195 */
vcoubard 1131:692ddf04fc42 1196 ble_error_t purgeAllBondingState(void) {
vcoubard 1131:692ddf04fc42 1197 return securityManager().purgeAllBondingState();
vcoubard 1131:692ddf04fc42 1198 }
vcoubard 1131:692ddf04fc42 1199
vcoubard 1131:692ddf04fc42 1200 /**
vcoubard 1131:692ddf04fc42 1201 * Set up a callback for timeout events. Refer to Gap::TimeoutSource_t for
vcoubard 1131:692ddf04fc42 1202 * possible event types.
vcoubard 1131:692ddf04fc42 1203 *
vcoubard 1142:a358d0d20f62 1204 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1205 * You should use the parallel API from Gap directly. A former call
vcoubard 1131:692ddf04fc42 1206 * to ble.onTimeout(callback) should be replaced with
vcoubard 1131:692ddf04fc42 1207 * ble.gap().onTimeout(callback).
vcoubard 1131:692ddf04fc42 1208 */
vcoubard 1131:692ddf04fc42 1209 void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
vcoubard 1131:692ddf04fc42 1210 gap().onTimeout(timeoutCallback);
vcoubard 1131:692ddf04fc42 1211 }
vcoubard 1131:692ddf04fc42 1212
vcoubard 1131:692ddf04fc42 1213 /**
vcoubard 1131:692ddf04fc42 1214 * Set up a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
vcoubard 1131:692ddf04fc42 1215 *
vcoubard 1142:a358d0d20f62 1216 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1217 * You should use the parallel API from Gap directly. A former call
vcoubard 1131:692ddf04fc42 1218 * to ble.onConnection(callback) should be replaced with
vcoubard 1131:692ddf04fc42 1219 * ble.gap().onConnection(callback).
vcoubard 1131:692ddf04fc42 1220 */
vcoubard 1131:692ddf04fc42 1221 void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
vcoubard 1131:692ddf04fc42 1222 gap().onConnection(connectionCallback);
vcoubard 1131:692ddf04fc42 1223 }
vcoubard 1131:692ddf04fc42 1224
vcoubard 1131:692ddf04fc42 1225 /**
vcoubard 1131:692ddf04fc42 1226 * Append to a chain of callbacks to be invoked upon GAP disconnection.
vcoubard 1131:692ddf04fc42 1227 *
vcoubard 1142:a358d0d20f62 1228 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1229 * You should use the parallel API from Gap directly. A former call
vcoubard 1131:692ddf04fc42 1230 * to ble.onDisconnection(callback) should be replaced with
vcoubard 1131:692ddf04fc42 1231 * ble.gap().onDisconnection(callback).
vcoubard 1131:692ddf04fc42 1232 */
vcoubard 1131:692ddf04fc42 1233 void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
vcoubard 1131:692ddf04fc42 1234 gap().onDisconnection(disconnectionCallback);
vcoubard 1131:692ddf04fc42 1235 }
vcoubard 1131:692ddf04fc42 1236
vcoubard 1142:a358d0d20f62 1237 /**
vcoubard 1142:a358d0d20f62 1238 * The same as onDisconnection(), but allows an object reference and member function
vcoubard 1142:a358d0d20f62 1239 * to be added to the chain of callbacks.
vcoubard 1142:a358d0d20f62 1240 *
vcoubard 1142:a358d0d20f62 1241 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1142:a358d0d20f62 1242 * You should use the parallel API from Gap directly. A former call
vcoubard 1142:a358d0d20f62 1243 * to ble.onDisconnection(callback) should be replaced with
vcoubard 1142:a358d0d20f62 1244 * ble.gap().onDisconnection(callback).
vcoubard 1142:a358d0d20f62 1245 */
vcoubard 1131:692ddf04fc42 1246 template<typename T>
vcoubard 1131:692ddf04fc42 1247 void onDisconnection(T *tptr, void (T::*mptr)(const Gap::DisconnectionCallbackParams_t*)) {
vcoubard 1131:692ddf04fc42 1248 gap().onDisconnection(tptr, mptr);
vcoubard 1131:692ddf04fc42 1249 }
vcoubard 1131:692ddf04fc42 1250
vcoubard 1131:692ddf04fc42 1251 /**
vcoubard 1131:692ddf04fc42 1252 * Radio Notification is a feature that enables ACTIVE and INACTIVE
vcoubard 1131:692ddf04fc42 1253 * (nACTIVE) signals from the stack. These notify the application when the
vcoubard 1131:692ddf04fc42 1254 * radio is in use. The signal is sent using software interrupt.
vcoubard 1131:692ddf04fc42 1255 *
vcoubard 1131:692ddf04fc42 1256 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard 1131:692ddf04fc42 1257 * signal is sent at the end of the radio event. These signals can be used
vcoubard 1131:692ddf04fc42 1258 * by the application programmer to synchronize application logic with radio
vcoubard 1131:692ddf04fc42 1259 * activity. For example, the ACTIVE signal can be used to shut off external
vcoubard 1131:692ddf04fc42 1260 * devices to manage peak current drawn during periods when the radio is on,
vcoubard 1131:692ddf04fc42 1261 * or to trigger sensor data collection for transmission in the radio event.
vcoubard 1131:692ddf04fc42 1262 *
vcoubard 1131:692ddf04fc42 1263 * @param callback
vcoubard 1131:692ddf04fc42 1264 * The application handler to be invoked in response to a radio
vcoubard 1131:692ddf04fc42 1265 * ACTIVE/INACTIVE event.
vcoubard 1131:692ddf04fc42 1266 *
vcoubard 1142:a358d0d20f62 1267 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1268 * You should use the parallel API from Gap directly. A former call
vcoubard 1131:692ddf04fc42 1269 * to ble.onRadioNotification(...) should be replaced with
vcoubard 1131:692ddf04fc42 1270 * ble.gap().onRadioNotification(...).
vcoubard 1131:692ddf04fc42 1271 */
vcoubard 1131:692ddf04fc42 1272 void onRadioNotification(void (*callback)(bool)) {
vcoubard 1131:692ddf04fc42 1273 gap().onRadioNotification(callback);
vcoubard 1131:692ddf04fc42 1274 }
vcoubard 1131:692ddf04fc42 1275
vcoubard 1131:692ddf04fc42 1276 /**
vcoubard 1131:692ddf04fc42 1277 * Add a callback for the GATT event DATA_SENT (which is triggered when
vcoubard 1131:692ddf04fc42 1278 * updates are sent out by GATT in the form of notifications).
vcoubard 1131:692ddf04fc42 1279 *
vcoubard 1142:a358d0d20f62 1280 * @note It is possible to chain together multiple onDataSent callbacks
vcoubard 1131:692ddf04fc42 1281 * (potentially from different modules of an application) to receive updates
vcoubard 1131:692ddf04fc42 1282 * to characteristics.
vcoubard 1131:692ddf04fc42 1283 *
vcoubard 1142:a358d0d20f62 1284 * @note It is also possible to set up a callback into a member function of
vcoubard 1131:692ddf04fc42 1285 * some object.
vcoubard 1131:692ddf04fc42 1286 *
vcoubard 1142:a358d0d20f62 1287 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1288 * You should use the parallel API from GattServer directly. A former call
vcoubard 1131:692ddf04fc42 1289 * to ble.onDataSent(...) should be replaced with
vcoubard 1131:692ddf04fc42 1290 * ble.gattServer().onDataSent(...).
vcoubard 1131:692ddf04fc42 1291 */
vcoubard 1131:692ddf04fc42 1292 void onDataSent(void (*callback)(unsigned count)) {
vcoubard 1131:692ddf04fc42 1293 gattServer().onDataSent(callback);
vcoubard 1131:692ddf04fc42 1294 }
vcoubard 1142:a358d0d20f62 1295
vcoubard 1142:a358d0d20f62 1296 /**
vcoubard 1142:a358d0d20f62 1297 * The same as onDataSent(), but allows an object reference and member function
vcoubard 1142:a358d0d20f62 1298 * to be added to the chain of callbacks.
vcoubard 1142:a358d0d20f62 1299 *
vcoubard 1142:a358d0d20f62 1300 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1142:a358d0d20f62 1301 * You should use the parallel API from GattServer directly. A former call
vcoubard 1142:a358d0d20f62 1302 * to ble.onDataSent(...) should be replaced with
vcoubard 1142:a358d0d20f62 1303 * ble.gattServer().onDataSent(...).
vcoubard 1142:a358d0d20f62 1304 */
vcoubard 1131:692ddf04fc42 1305 template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
vcoubard 1131:692ddf04fc42 1306 gattServer().onDataSent(objPtr, memberPtr);
vcoubard 1131:692ddf04fc42 1307 }
vcoubard 1131:692ddf04fc42 1308
vcoubard 1131:692ddf04fc42 1309 /**
vcoubard 1131:692ddf04fc42 1310 * Set up a callback for when an attribute has its value updated by or at the
vcoubard 1131:692ddf04fc42 1311 * connected peer. For a peripheral, this callback is triggered when the local
vcoubard 1131:692ddf04fc42 1312 * GATT server has an attribute updated by a write command from the peer.
vcoubard 1131:692ddf04fc42 1313 * For a Central, this callback is triggered when a response is received for
vcoubard 1131:692ddf04fc42 1314 * a write request.
vcoubard 1131:692ddf04fc42 1315 *
vcoubard 1142:a358d0d20f62 1316 * @note It is possible to chain together multiple onDataWritten callbacks
vcoubard 1131:692ddf04fc42 1317 * (potentially from different modules of an application) to receive updates
vcoubard 1131:692ddf04fc42 1318 * to characteristics. Many services, such as DFU and UART, add their own
vcoubard 1131:692ddf04fc42 1319 * onDataWritten callbacks behind the scenes to trap interesting events.
vcoubard 1131:692ddf04fc42 1320 *
vcoubard 1142:a358d0d20f62 1321 * @note It is also possible to set up a callback into a member function of
vcoubard 1131:692ddf04fc42 1322 * some object.
vcoubard 1131:692ddf04fc42 1323 *
vcoubard 1142:a358d0d20f62 1324 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1325 * You should use the parallel API from GattServer directly. A former call
vcoubard 1131:692ddf04fc42 1326 * to ble.onDataWritten(...) should be replaced with
vcoubard 1131:692ddf04fc42 1327 * ble.gattServer().onDataWritten(...).
vcoubard 1131:692ddf04fc42 1328 */
vcoubard 1131:692ddf04fc42 1329 void onDataWritten(void (*callback)(const GattWriteCallbackParams *eventDataP)) {
vcoubard 1131:692ddf04fc42 1330 gattServer().onDataWritten(callback);
vcoubard 1131:692ddf04fc42 1331 }
vcoubard 1142:a358d0d20f62 1332
vcoubard 1142:a358d0d20f62 1333 /**
vcoubard 1142:a358d0d20f62 1334 * The same as onDataWritten(), but allows an object reference and member function
vcoubard 1142:a358d0d20f62 1335 * to be added to the chain of callbacks.
vcoubard 1142:a358d0d20f62 1336 *
vcoubard 1142:a358d0d20f62 1337 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1142:a358d0d20f62 1338 * You should use the parallel API from GattServer directly. A former call
vcoubard 1142:a358d0d20f62 1339 * to ble.onDataWritten(...) should be replaced with
vcoubard 1142:a358d0d20f62 1340 * ble.gattServer().onDataWritten(...).
vcoubard 1142:a358d0d20f62 1341 */
vcoubard 1131:692ddf04fc42 1342 template <typename T> void onDataWritten(T * objPtr, void (T::*memberPtr)(const GattWriteCallbackParams *context)) {
vcoubard 1131:692ddf04fc42 1343 gattServer().onDataWritten(objPtr, memberPtr);
vcoubard 1131:692ddf04fc42 1344 }
vcoubard 1131:692ddf04fc42 1345
vcoubard 1131:692ddf04fc42 1346 /**
vcoubard 1131:692ddf04fc42 1347 * Set up a callback to be invoked on the peripheral when an attribute is
vcoubard 1131:692ddf04fc42 1348 * being read by a remote client.
vcoubard 1131:692ddf04fc42 1349 *
vcoubard 1142:a358d0d20f62 1350 * @note This functionality may not be available on all underlying stacks.
vcoubard 1131:692ddf04fc42 1351 * You could use GattCharacteristic::setReadAuthorizationCallback() as an
vcoubard 1131:692ddf04fc42 1352 * alternative.
vcoubard 1131:692ddf04fc42 1353 *
vcoubard 1142:a358d0d20f62 1354 * @note It is possible to chain together multiple onDataRead callbacks
vcoubard 1131:692ddf04fc42 1355 * (potentially from different modules of an application) to receive updates
vcoubard 1131:692ddf04fc42 1356 * to characteristics. Services may add their own onDataRead callbacks
vcoubard 1131:692ddf04fc42 1357 * behind the scenes to trap interesting events.
vcoubard 1131:692ddf04fc42 1358 *
vcoubard 1142:a358d0d20f62 1359 * @note It is also possible to set up a callback into a member function of
vcoubard 1131:692ddf04fc42 1360 * some object.
vcoubard 1131:692ddf04fc42 1361 *
vcoubard 1131:692ddf04fc42 1362 * @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
vcoubard 1131:692ddf04fc42 1363 * else BLE_ERROR_NONE.
vcoubard 1131:692ddf04fc42 1364 *
vcoubard 1142:a358d0d20f62 1365 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1366 * You should use the parallel API from GattServer directly. A former call
vcoubard 1131:692ddf04fc42 1367 * to ble.onDataRead(...) should be replaced with
vcoubard 1131:692ddf04fc42 1368 * ble.gattServer().onDataRead(...).
vcoubard 1131:692ddf04fc42 1369 */
vcoubard 1131:692ddf04fc42 1370 ble_error_t onDataRead(void (*callback)(const GattReadCallbackParams *eventDataP)) {
vcoubard 1131:692ddf04fc42 1371 return gattServer().onDataRead(callback);
vcoubard 1131:692ddf04fc42 1372 }
vcoubard 1142:a358d0d20f62 1373
vcoubard 1142:a358d0d20f62 1374 /**
vcoubard 1142:a358d0d20f62 1375 * The same as onDataRead(), but allows an object reference and member function
vcoubard 1142:a358d0d20f62 1376 * to be added to the chain of callbacks.
vcoubard 1142:a358d0d20f62 1377 *
vcoubard 1142:a358d0d20f62 1378 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1142:a358d0d20f62 1379 * You should use the parallel API from GattServer directly. A former call
vcoubard 1142:a358d0d20f62 1380 * to ble.onDataRead(...) should be replaced with
vcoubard 1142:a358d0d20f62 1381 * ble.gattServer().onDataRead(...).
vcoubard 1142:a358d0d20f62 1382 */
vcoubard 1131:692ddf04fc42 1383 template <typename T> ble_error_t onDataRead(T * objPtr, void (T::*memberPtr)(const GattReadCallbackParams *context)) {
vcoubard 1131:692ddf04fc42 1384 return gattServer().onDataRead(objPtr, memberPtr);
vcoubard 1131:692ddf04fc42 1385 }
vcoubard 1131:692ddf04fc42 1386
vcoubard 1131:692ddf04fc42 1387 /**
vcoubard 1131:692ddf04fc42 1388 * Set up a callback for when notifications or indications are enabled for a
vcoubard 1131:692ddf04fc42 1389 * characteristic on the local GattServer.
vcoubard 1131:692ddf04fc42 1390 *
vcoubard 1142:a358d0d20f62 1391 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1392 * You should use the parallel API from GattServer directly. A former call
vcoubard 1131:692ddf04fc42 1393 * to ble.onUpdatesEnabled(callback) should be replaced with
vcoubard 1131:692ddf04fc42 1394 * ble.gattServer().onUpdatesEnabled(callback).
vcoubard 1131:692ddf04fc42 1395 */
vcoubard 1131:692ddf04fc42 1396 void onUpdatesEnabled(GattServer::EventCallback_t callback) {
vcoubard 1131:692ddf04fc42 1397 gattServer().onUpdatesEnabled(callback);
vcoubard 1131:692ddf04fc42 1398 }
vcoubard 1131:692ddf04fc42 1399
vcoubard 1131:692ddf04fc42 1400 /**
vcoubard 1131:692ddf04fc42 1401 * Set up a callback for when notifications or indications are disabled for a
vcoubard 1131:692ddf04fc42 1402 * characteristic on the local GattServer.
vcoubard 1131:692ddf04fc42 1403 *
vcoubard 1142:a358d0d20f62 1404 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1405 * You should use the parallel API from GattServer directly. A former call
vcoubard 1131:692ddf04fc42 1406 * to ble.onUpdatesEnabled(callback) should be replaced with
vcoubard 1131:692ddf04fc42 1407 * ble.gattServer().onUpdatesEnabled(callback).
vcoubard 1131:692ddf04fc42 1408 */
vcoubard 1131:692ddf04fc42 1409 void onUpdatesDisabled(GattServer::EventCallback_t callback) {
vcoubard 1131:692ddf04fc42 1410 gattServer().onUpdatesDisabled(callback);
vcoubard 1131:692ddf04fc42 1411 }
vcoubard 1131:692ddf04fc42 1412
vcoubard 1131:692ddf04fc42 1413 /**
vcoubard 1131:692ddf04fc42 1414 * Set up a callback for when the GATT server receives a response for an
vcoubard 1131:692ddf04fc42 1415 * indication event sent previously.
vcoubard 1131:692ddf04fc42 1416 *
vcoubard 1142:a358d0d20f62 1417 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1418 * You should use the parallel API from GattServer directly. A former call
vcoubard 1131:692ddf04fc42 1419 * to ble.onConfirmationReceived(callback) should be replaced with
vcoubard 1131:692ddf04fc42 1420 * ble.gattServer().onConfirmationReceived(callback).
vcoubard 1131:692ddf04fc42 1421 */
vcoubard 1131:692ddf04fc42 1422 void onConfirmationReceived(GattServer::EventCallback_t callback) {
vcoubard 1131:692ddf04fc42 1423 gattServer().onConfirmationReceived(callback);
vcoubard 1131:692ddf04fc42 1424 }
vcoubard 1131:692ddf04fc42 1425
vcoubard 1131:692ddf04fc42 1426 /**
vcoubard 1131:692ddf04fc42 1427 * Set up a callback for when the security setup procedure (key generation
vcoubard 1131:692ddf04fc42 1428 * and exchange) for a link has started. This will be skipped for bonded
vcoubard 1131:692ddf04fc42 1429 * devices. The callback is passed in parameters received from the peer's
vcoubard 1131:692ddf04fc42 1430 * security request: bool allowBonding, bool requireMITM, and
vcoubard 1131:692ddf04fc42 1431 * SecurityIOCapabilities_t.
vcoubard 1131:692ddf04fc42 1432 *
vcoubard 1142:a358d0d20f62 1433 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1434 * You should use the parallel API from SecurityManager directly. A former
vcoubard 1131:692ddf04fc42 1435 * call to ble.onSecuritySetupInitiated(callback) should be replaced with
vcoubard 1131:692ddf04fc42 1436 * ble.securityManager().onSecuritySetupInitiated(callback).
vcoubard 1131:692ddf04fc42 1437 */
vcoubard 1131:692ddf04fc42 1438 void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
vcoubard 1131:692ddf04fc42 1439 securityManager().onSecuritySetupInitiated(callback);
vcoubard 1131:692ddf04fc42 1440 }
vcoubard 1131:692ddf04fc42 1441
vcoubard 1131:692ddf04fc42 1442 /**
vcoubard 1131:692ddf04fc42 1443 * Set up a callback for when the security setup procedure (key generation
vcoubard 1131:692ddf04fc42 1444 * and exchange) for a link has completed. This will be skipped for bonded
vcoubard 1131:692ddf04fc42 1445 * devices. The callback is passed in the success/failure status of the
vcoubard 1131:692ddf04fc42 1446 * security setup procedure.
vcoubard 1131:692ddf04fc42 1447 *
vcoubard 1142:a358d0d20f62 1448 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1449 * You should use the parallel API from SecurityManager directly. A former
vcoubard 1131:692ddf04fc42 1450 * call to ble.onSecuritySetupCompleted(callback) should be replaced with
vcoubard 1131:692ddf04fc42 1451 * ble.securityManager().onSecuritySetupCompleted(callback).
vcoubard 1131:692ddf04fc42 1452 */
vcoubard 1131:692ddf04fc42 1453 void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
vcoubard 1131:692ddf04fc42 1454 securityManager().onSecuritySetupCompleted(callback);
vcoubard 1131:692ddf04fc42 1455 }
vcoubard 1131:692ddf04fc42 1456
vcoubard 1131:692ddf04fc42 1457 /**
vcoubard 1131:692ddf04fc42 1458 * Set up a callback for when a link with the peer is secured. For bonded
vcoubard 1131:692ddf04fc42 1459 * devices, subsequent reconnections with a bonded peer will result only in
vcoubard 1131:692ddf04fc42 1460 * this callback when the link is secured, and setup procedures will not
vcoubard 1131:692ddf04fc42 1461 * occur unless the bonding information is either lost or deleted on either
vcoubard 1131:692ddf04fc42 1462 * or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
vcoubard 1131:692ddf04fc42 1463 * to the level of security in effect for the secured link.
vcoubard 1131:692ddf04fc42 1464 *
vcoubard 1142:a358d0d20f62 1465 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1466 * You should use the parallel API from SecurityManager directly. A former
vcoubard 1131:692ddf04fc42 1467 * call to ble.onLinkSecured(callback) should be replaced with
vcoubard 1131:692ddf04fc42 1468 * ble.securityManager().onLinkSecured(callback).
vcoubard 1131:692ddf04fc42 1469 */
vcoubard 1131:692ddf04fc42 1470 void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
vcoubard 1131:692ddf04fc42 1471 securityManager().onLinkSecured(callback);
vcoubard 1131:692ddf04fc42 1472 }
vcoubard 1131:692ddf04fc42 1473
vcoubard 1131:692ddf04fc42 1474 /**
vcoubard 1131:692ddf04fc42 1475 * Set up a callback for successful bonding, meaning that link-specific security
vcoubard 1131:692ddf04fc42 1476 * context is stored persistently for a peer device.
vcoubard 1131:692ddf04fc42 1477 *
vcoubard 1142:a358d0d20f62 1478 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1479 * You should use the parallel API from SecurityManager directly. A former
vcoubard 1131:692ddf04fc42 1480 * call to ble.onSecurityContextStored(callback) should be replaced with
vcoubard 1131:692ddf04fc42 1481 * ble.securityManager().onSecurityContextStored(callback).
vcoubard 1131:692ddf04fc42 1482 */
vcoubard 1131:692ddf04fc42 1483 void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
vcoubard 1131:692ddf04fc42 1484 securityManager().onSecurityContextStored(callback);
vcoubard 1131:692ddf04fc42 1485 }
vcoubard 1131:692ddf04fc42 1486
vcoubard 1131:692ddf04fc42 1487 /**
vcoubard 1131:692ddf04fc42 1488 * Set up a callback for when the passkey needs to be displayed on a
vcoubard 1131:692ddf04fc42 1489 * peripheral with DISPLAY capability. This happens when security is
vcoubard 1135:22aada733dbd 1490 * configured to prevent Man-In-The-Middle attacks, and the peers need to exchange
vcoubard 1131:692ddf04fc42 1491 * a passkey (or PIN) to authenticate the connection
vcoubard 1131:692ddf04fc42 1492 * attempt.
vcoubard 1131:692ddf04fc42 1493 *
vcoubard 1142:a358d0d20f62 1494 * @note This API is now *deprecated* and will be dropped in the future.
vcoubard 1131:692ddf04fc42 1495 * You should use the parallel API from SecurityManager directly. A former
vcoubard 1131:692ddf04fc42 1496 * call to ble.onPasskeyDisplay(callback) should be replaced with
vcoubard 1131:692ddf04fc42 1497 * ble.securityManager().onPasskeyDisplay(callback).
vcoubard 1131:692ddf04fc42 1498 */
vcoubard 1131:692ddf04fc42 1499 void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
vcoubard 1131:692ddf04fc42 1500 return securityManager().onPasskeyDisplay(callback);
vcoubard 1131:692ddf04fc42 1501 }
vcoubard 1131:692ddf04fc42 1502
vcoubard 1131:692ddf04fc42 1503 private:
vcoubard 1131:692ddf04fc42 1504 /**
vcoubard 1131:692ddf04fc42 1505 * Implementation of init() [internal to BLE_API].
vcoubard 1131:692ddf04fc42 1506 *
vcoubard 1131:692ddf04fc42 1507 * The implementation is separated into a private method because it isn't
vcoubard 1131:692ddf04fc42 1508 * suitable to be included in the header.
vcoubard 1131:692ddf04fc42 1509 */
vcoubard 1131:692ddf04fc42 1510 ble_error_t initImplementation(FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback);
vcoubard 1131:692ddf04fc42 1511
vcoubard 1131:692ddf04fc42 1512 private:
vcoubard 1131:692ddf04fc42 1513 BLE(const BLE&);
vcoubard 1131:692ddf04fc42 1514 BLE &operator=(const BLE &);
vcoubard 1131:692ddf04fc42 1515
vcoubard 1131:692ddf04fc42 1516 private:
vcoubard 1131:692ddf04fc42 1517 InstanceID_t instanceID;
vcoubard 1131:692ddf04fc42 1518 BLEInstanceBase *transport; /* The device-specific backend */
vcoubard 1131:692ddf04fc42 1519 };
vcoubard 1131:692ddf04fc42 1520
vcoubard 1131:692ddf04fc42 1521 typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
vcoubard 1131:692ddf04fc42 1522 * code. Will be dropped at some point soon.*/
vcoubard 1131:692ddf04fc42 1523
rgrover1 716:11b41f651697 1524 #endif // ifndef __BLE_H__