BLE_API - High level Bluetooth Low Energy API and radio abs…

Bluetooth Low Energy » Code » BLE_API

High level Bluetooth Low Energy API and radio abstraction layer

Dependents: BLE_ANCS_SDAPI BLE_temperature BLE_HeartRate BLE_ANCS_SDAPI_IRC ... more

Overview

The BLE_API is a high level abstraction for using Bluetooth Low Energy on multiple platforms. For details and examples using the BLE_API please see the BLE_API Summary Page. Or click on the API Documentation tab above.

Supported Services

Supported services can be found in the BLE_API/services folder.

ble/BLE.h@1135:22aada733dbd, 2016-04-06 (annotated)

Committer:: vcoubard
Date:: Wed Apr 06 19:13:54 2016 +0100
Revision:: 1135:22aada733dbd
Parent:: 1131:692ddf04fc42
Child:: 1141:510f5d2d2732

Synchronized with git rev 17e37360

Author: Vincent Coubard

Merge pull request #161 from ARMmbed/develop



merge branch develop (v2.4.0)

Who changed what in which revision?

User	Revision	Line number	New contents of line
vcoubard	1131:692ddf04fc42	1	/* mbed Microcontroller Library
vcoubard	1131:692ddf04fc42	2	* Copyright (c) 2006-2013 ARM Limited
vcoubard	1131:692ddf04fc42	3	*
vcoubard	1131:692ddf04fc42	4	* Licensed under the Apache License, Version 2.0 (the "License");
vcoubard	1131:692ddf04fc42	5	* you may not use this file except in compliance with the License.
vcoubard	1131:692ddf04fc42	6	* You may obtain a copy of the License at
vcoubard	1131:692ddf04fc42	7	*
vcoubard	1131:692ddf04fc42	8	* http://www.apache.org/licenses/LICENSE-2.0
vcoubard	1131:692ddf04fc42	9	*
vcoubard	1131:692ddf04fc42	10	* Unless required by applicable law or agreed to in writing, software
vcoubard	1131:692ddf04fc42	11	* distributed under the License is distributed on an "AS IS" BASIS,
vcoubard	1131:692ddf04fc42	12	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
vcoubard	1131:692ddf04fc42	13	* See the License for the specific language governing permissions and
vcoubard	1131:692ddf04fc42	14	* limitations under the License.
vcoubard	1131:692ddf04fc42	15	*/
vcoubard	1131:692ddf04fc42	16
vcoubard	1131:692ddf04fc42	17	#ifndef __BLE_H__
vcoubard	1131:692ddf04fc42	18	#define __BLE_H__
vcoubard	1131:692ddf04fc42	19
vcoubard	1131:692ddf04fc42	20	#include "blecommon.h"
vcoubard	1131:692ddf04fc42	21	#include "Gap.h"
vcoubard	1131:692ddf04fc42	22	#include "GattServer.h"
vcoubard	1131:692ddf04fc42	23	#include "GattClient.h"
vcoubard	1131:692ddf04fc42	24
vcoubard	1131:692ddf04fc42	25	#include "ble/FunctionPointerWithContext.h"
vcoubard	1131:692ddf04fc42	26
vcoubard	1131:692ddf04fc42	27	#ifdef YOTTA_CFG_MBED_OS
vcoubard	1131:692ddf04fc42	28	#include "mbed-drivers/mbed_error.h"
vcoubard	1131:692ddf04fc42	29	#else
vcoubard	1131:692ddf04fc42	30	#include "mbed_error.h"
vcoubard	1131:692ddf04fc42	31	#endif
vcoubard	1131:692ddf04fc42	32
vcoubard	1131:692ddf04fc42	33	/* Forward declaration for the implementation class */
vcoubard	1131:692ddf04fc42	34	class BLEInstanceBase;
vcoubard	1131:692ddf04fc42	35
vcoubard	1131:692ddf04fc42	36	/**
vcoubard	1131:692ddf04fc42	37	* The base class used to abstract away BLE-capable radio transceivers or SOCs,
vcoubard	1131:692ddf04fc42	38	* so that the BLE API can work with any radio transparently.
vcoubard	1131:692ddf04fc42	39	*/
vcoubard	1131:692ddf04fc42	40	class BLE
vcoubard	1131:692ddf04fc42	41	{
vcoubard	1131:692ddf04fc42	42	public:
vcoubard	1131:692ddf04fc42	43	typedef unsigned InstanceID_t; /** The type returned by BLE::getInstanceID(). */
vcoubard	1131:692ddf04fc42	44
vcoubard	1131:692ddf04fc42	45	/**
vcoubard	1131:692ddf04fc42	46	* The context provided to init-completion-callbacks (see init() below).
vcoubard	1131:692ddf04fc42	47	*
vcoubard	1131:692ddf04fc42	48	* @param ble
vcoubard	1131:692ddf04fc42	49	* A reference to the BLE instance being initialized.
vcoubard	1131:692ddf04fc42	50	* @param error
vcoubard	1131:692ddf04fc42	51	* Captures the result of initialization. It is set to
vcoubard	1131:692ddf04fc42	52	* BLE_ERROR_NONE if initialization completed successfully. Else
vcoubard	1131:692ddf04fc42	53	* the error value is implementation specific.
vcoubard	1131:692ddf04fc42	54	*/
vcoubard	1131:692ddf04fc42	55	struct InitializationCompleteCallbackContext {
vcoubard	1131:692ddf04fc42	56	BLE& ble; /* Reference to the BLE object that has been initialized */
vcoubard	1131:692ddf04fc42	57	ble_error_t error; /* Error status of the initialization. It is set to BLE_ERROR_NONE if initialization completed successfully. */
vcoubard	1131:692ddf04fc42	58	};
vcoubard	1131:692ddf04fc42	59
vcoubard	1131:692ddf04fc42	60	/**
vcoubard	1131:692ddf04fc42	61	* The signature for function-pointer like callbacks for initialization-completion.
vcoubard	1131:692ddf04fc42	62	*
vcoubard	1131:692ddf04fc42	63	* @note There are two versions of init(). In addition to the simple
vcoubard	1131:692ddf04fc42	64	* function-pointer, init() can also take a <Object, member> tuple as its
vcoubard	1131:692ddf04fc42	65	* callback target. In case of the latter, the following declaration doesn't apply.
vcoubard	1131:692ddf04fc42	66	*/
vcoubard	1131:692ddf04fc42	67	typedef void (InitializationCompleteCallback_t)(InitializationCompleteCallbackContext context);
vcoubard	1131:692ddf04fc42	68
vcoubard	1131:692ddf04fc42	69	/**
vcoubard	1131:692ddf04fc42	70	* Initialize the BLE controller. This should be called before using
vcoubard	1131:692ddf04fc42	71	* anything else in the BLE_API.
vcoubard	1131:692ddf04fc42	72	*
vcoubard	1131:692ddf04fc42	73	* init() hands control to the underlying BLE module to accomplish
vcoubard	1131:692ddf04fc42	74	* initialization. This initialization may tacitly depend on other hardware
vcoubard	1131:692ddf04fc42	75	* setup (such as clocks or power-modes) that happens early on during
vcoubard	1131:692ddf04fc42	76	* system startup. It may not be safe to call init() from a global static
vcoubard	1131:692ddf04fc42	77	* context where ordering is compiler-specific and can't be guaranteed - it
vcoubard	1131:692ddf04fc42	78	* is safe to call BLE::init() from within main().
vcoubard	1131:692ddf04fc42	79	*
vcoubard	1131:692ddf04fc42	80	* @param initCompleteCallback
vcoubard	1131:692ddf04fc42	81	* A callback for when initialization completes for a BLE
vcoubard	1131:692ddf04fc42	82	* instance. This is an optional parameter; if no callback is
vcoubard	1131:692ddf04fc42	83	* set up the application can still determine the status of
vcoubard	1131:692ddf04fc42	84	* initialization using BLE::hasInitialized() (see below).
vcoubard	1131:692ddf04fc42	85	*
vcoubard	1131:692ddf04fc42	86	* @return BLE_ERROR_NONE if the initialization procedure was started
vcoubard	1131:692ddf04fc42	87	* successfully.
vcoubard	1131:692ddf04fc42	88	*
vcoubard	1131:692ddf04fc42	89	* @note If init() returns BLE_ERROR_NONE, the underlying stack must invoke
vcoubard	1131:692ddf04fc42	90	* the initialization completion callback at some point.
vcoubard	1131:692ddf04fc42	91	*
vcoubard	1131:692ddf04fc42	92	* @note In some cases, initialization is instantaneous (or blocking); if
vcoubard	1131:692ddf04fc42	93	* so, it is acceptable for the stack-specific implementation of init()
vcoubard	1131:692ddf04fc42	94	* to invoke the completion callback directly (within its own
vcoubard	1131:692ddf04fc42	95	* context).
vcoubard	1131:692ddf04fc42	96	*
vcoubard	1131:692ddf04fc42	97	* @note Nearly all BLE APIs would return
vcoubard	1131:692ddf04fc42	98	* BLE_ERROR_INITIALIZATION_INCOMPLETE if used on an instance before the
vcoubard	1131:692ddf04fc42	99	* corresponding transport is initialized.
vcoubard	1131:692ddf04fc42	100	*
vcoubard	1131:692ddf04fc42	101	* @note There are two versions of init(). In addition to the simple
vcoubard	1131:692ddf04fc42	102	* function-pointer, init() can also take an <Object, member> tuple as its
vcoubard	1131:692ddf04fc42	103	* callback target.
vcoubard	1131:692ddf04fc42	104	*/
vcoubard	1131:692ddf04fc42	105	ble_error_t init(InitializationCompleteCallback_t initCompleteCallback = NULL) {
vcoubard	1131:692ddf04fc42	106	FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(initCompleteCallback);
vcoubard	1131:692ddf04fc42	107	return initImplementation(callback);
vcoubard	1131:692ddf04fc42	108	}
vcoubard	1131:692ddf04fc42	109
vcoubard	1131:692ddf04fc42	110	/**
vcoubard	1131:692ddf04fc42	111	* An alternate declaration for init(). This one takes an <Object, member> tuple as its
vcoubard	1131:692ddf04fc42	112	* callback target.
vcoubard	1131:692ddf04fc42	113	*/
vcoubard	1131:692ddf04fc42	114	template<typename T>
vcoubard	1131:692ddf04fc42	115	ble_error_t init(T object, void (T::initCompleteCallback)(InitializationCompleteCallbackContext *context)) {
vcoubard	1131:692ddf04fc42	116	FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(object, initCompleteCallback);
vcoubard	1131:692ddf04fc42	117	return initImplementation(callback);
vcoubard	1131:692ddf04fc42	118	}
vcoubard	1131:692ddf04fc42	119
vcoubard	1131:692ddf04fc42	120	/**
vcoubard	1131:692ddf04fc42	121	* @return true if initialization has completed for the underlying BLE
vcoubard	1131:692ddf04fc42	122	* transport.
vcoubard	1131:692ddf04fc42	123	*
vcoubard	1131:692ddf04fc42	124	* The application can set up a callback to signal completion of
vcoubard	1131:692ddf04fc42	125	* initialization when using init(). Otherwise, this method can be used to
vcoubard	1131:692ddf04fc42	126	* poll the state of initialization.
vcoubard	1131:692ddf04fc42	127	*/
vcoubard	1131:692ddf04fc42	128	bool hasInitialized(void) const;
vcoubard	1131:692ddf04fc42	129
vcoubard	1131:692ddf04fc42	130	/**
vcoubard	1131:692ddf04fc42	131	* Purge the BLE stack of GATT and GAP state. init() must be called
vcoubard	1131:692ddf04fc42	132	* afterwards to re-instate services and GAP state. This API offers a way to
vcoubard	1131:692ddf04fc42	133	* repopulate the GATT database with new services and characteristics.
vcoubard	1131:692ddf04fc42	134	*/
vcoubard	1131:692ddf04fc42	135	ble_error_t shutdown(void);
vcoubard	1131:692ddf04fc42	136
vcoubard	1131:692ddf04fc42	137	/**
vcoubard	1131:692ddf04fc42	138	* This call allows the application to get the BLE stack version information.
vcoubard	1131:692ddf04fc42	139	*
vcoubard	1131:692ddf04fc42	140	* @return A pointer to a const string representing the version.
vcoubard	1131:692ddf04fc42	141	* Note: The string is owned by BLE_API.
vcoubard	1131:692ddf04fc42	142	*/
vcoubard	1131:692ddf04fc42	143	const char *getVersion(void);
vcoubard	1131:692ddf04fc42	144
vcoubard	1131:692ddf04fc42	145	/*
vcoubard	1131:692ddf04fc42	146	* Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
vcoubard	1131:692ddf04fc42	147	* going through this accessor.
vcoubard	1131:692ddf04fc42	148	*/
vcoubard	1131:692ddf04fc42	149	const Gap &gap() const;
vcoubard	1131:692ddf04fc42	150	Gap &gap();
vcoubard	1131:692ddf04fc42	151
vcoubard	1131:692ddf04fc42	152	/*
vcoubard	1131:692ddf04fc42	153	* Accessors to GATT Server. Please refer to GattServer.h. All GATTServer related
vcoubard	1131:692ddf04fc42	154	* functionality requires going through this accessor.
vcoubard	1131:692ddf04fc42	155	*/
vcoubard	1131:692ddf04fc42	156	const GattServer& gattServer() const;
vcoubard	1131:692ddf04fc42	157	GattServer& gattServer();
vcoubard	1131:692ddf04fc42	158
vcoubard	1131:692ddf04fc42	159	/*
vcoubard	1131:692ddf04fc42	160	* Accessors to GATT Client. Please refer to GattClient.h. All GATTClient related
vcoubard	1131:692ddf04fc42	161	* functionality requires going through this accessor.
vcoubard	1131:692ddf04fc42	162	*/
vcoubard	1131:692ddf04fc42	163	const GattClient& gattClient() const;
vcoubard	1131:692ddf04fc42	164	GattClient& gattClient();
vcoubard	1131:692ddf04fc42	165
vcoubard	1131:692ddf04fc42	166	/*
vcoubard	1131:692ddf04fc42	167	* Accessors to Security Manager. Please refer to SecurityManager.h. All
vcoubard	1131:692ddf04fc42	168	* SecurityManager related functionality requires going through this
vcoubard	1131:692ddf04fc42	169	* accessor.
vcoubard	1131:692ddf04fc42	170	*/
vcoubard	1131:692ddf04fc42	171	const SecurityManager& securityManager() const;
vcoubard	1131:692ddf04fc42	172	SecurityManager& securityManager();
vcoubard	1131:692ddf04fc42	173
vcoubard	1131:692ddf04fc42	174	/**
vcoubard	1131:692ddf04fc42	175	* Yield control to the BLE stack or to other tasks waiting for events. This
vcoubard	1131:692ddf04fc42	176	* is a sleep function that will return when there is an application-specific
vcoubard	1131:692ddf04fc42	177	* interrupt, but the MCU might wake up several times before
vcoubard	1131:692ddf04fc42	178	* returning (to service the stack). This is not always interchangeable with
vcoubard	1131:692ddf04fc42	179	* WFE().
vcoubard	1131:692ddf04fc42	180	*/
vcoubard	1131:692ddf04fc42	181	void waitForEvent(void);
vcoubard	1131:692ddf04fc42	182
vcoubard	1131:692ddf04fc42	183	public:
vcoubard	1131:692ddf04fc42	184	static const InstanceID_t DEFAULT_INSTANCE = 0;
vcoubard	1131:692ddf04fc42	185	#ifndef YOTTA_CFG_BLE_INSTANCES_COUNT
vcoubard	1131:692ddf04fc42	186	static const InstanceID_t NUM_INSTANCES = 1;
vcoubard	1131:692ddf04fc42	187	#else
vcoubard	1131:692ddf04fc42	188	static const InstanceID_t NUM_INSTANCES = YOTTA_CFG_BLE_INSTANCES_COUNT;
vcoubard	1131:692ddf04fc42	189	#endif
vcoubard	1131:692ddf04fc42	190
vcoubard	1131:692ddf04fc42	191	/**
vcoubard	1131:692ddf04fc42	192	* Get a reference to the BLE singleton corresponding to a given interface.
vcoubard	1131:692ddf04fc42	193	* There is a static array of BLE singletons.
vcoubard	1131:692ddf04fc42	194	*
vcoubard	1131:692ddf04fc42	195	* @Note: Calling Instance() is preferred over constructing a BLE object
vcoubard	1131:692ddf04fc42	196	* directly, as it returns references to singletons.
vcoubard	1131:692ddf04fc42	197	*
vcoubard	1131:692ddf04fc42	198	* @param[in] id
vcoubard	1135:22aada733dbd	199	* Instance-ID. This should be less than NUM_INSTANCES
vcoubard	1131:692ddf04fc42	200	* for the returned BLE singleton to be useful.
vcoubard	1131:692ddf04fc42	201	*
vcoubard	1131:692ddf04fc42	202	* @return a reference to a single object.
vcoubard	1131:692ddf04fc42	203	*/
vcoubard	1131:692ddf04fc42	204	static BLE &Instance(InstanceID_t id = DEFAULT_INSTANCE);
vcoubard	1131:692ddf04fc42	205
vcoubard	1131:692ddf04fc42	206	/**
vcoubard	1131:692ddf04fc42	207	* Constructor for a handle to a BLE instance (the BLE stack). BLE handles
vcoubard	1131:692ddf04fc42	208	* are thin wrappers around a transport object (that is, ptr. to
vcoubard	1131:692ddf04fc42	209	* BLEInstanceBase).
vcoubard	1131:692ddf04fc42	210	*
vcoubard	1131:692ddf04fc42	211	* It is better to create BLE objects as singletons accessed through the
vcoubard	1131:692ddf04fc42	212	* Instance() method. If multiple BLE handles are constructed for the same
vcoubard	1131:692ddf04fc42	213	* interface (using this constructor), they will share the same underlying
vcoubard	1131:692ddf04fc42	214	* transport object.
vcoubard	1131:692ddf04fc42	215	*/
vcoubard	1131:692ddf04fc42	216	BLE(InstanceID_t instanceID = DEFAULT_INSTANCE);
vcoubard	1131:692ddf04fc42	217
vcoubard	1131:692ddf04fc42	218	/**
vcoubard	1131:692ddf04fc42	219	* Fetch the ID of a BLE instance. Typically there would only be the DEFAULT_INSTANCE.
vcoubard	1131:692ddf04fc42	220	*/
vcoubard	1131:692ddf04fc42	221	InstanceID_t getInstanceID(void) const {
vcoubard	1131:692ddf04fc42	222	return instanceID;
vcoubard	1131:692ddf04fc42	223	}
vcoubard	1131:692ddf04fc42	224
vcoubard	1131:692ddf04fc42	225	/*
vcoubard	1131:692ddf04fc42	226	* Deprecation alert!
vcoubard	1131:692ddf04fc42	227	* All of the following are deprecated and may be dropped in a future
vcoubard	1131:692ddf04fc42	228	* release. Documentation should refer to alternative APIs.
vcoubard	1131:692ddf04fc42	229	*/
vcoubard	1131:692ddf04fc42	230
vcoubard	1131:692ddf04fc42	231	/* GAP specific APIs. */
vcoubard	1131:692ddf04fc42	232	public:
vcoubard	1131:692ddf04fc42	233	/**
vcoubard	1131:692ddf04fc42	234	* Set the BTLE MAC address and type.
vcoubard	1131:692ddf04fc42	235	* @return BLE_ERROR_NONE on success.
vcoubard	1131:692ddf04fc42	236	*
vcoubard	1131:692ddf04fc42	237	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	238	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	239	* ble.setAddress(...) should be replaced with
vcoubard	1131:692ddf04fc42	240	* ble.gap().setAddress(...).
vcoubard	1131:692ddf04fc42	241	*/
vcoubard	1135:22aada733dbd	242	ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::AddressBytes_t address) {
vcoubard	1131:692ddf04fc42	243	return gap().setAddress(type, address);
vcoubard	1131:692ddf04fc42	244	}
vcoubard	1131:692ddf04fc42	245
vcoubard	1131:692ddf04fc42	246	/**
vcoubard	1131:692ddf04fc42	247	* Fetch the BTLE MAC address and type.
vcoubard	1131:692ddf04fc42	248	* @return BLE_ERROR_NONE on success.
vcoubard	1131:692ddf04fc42	249	*
vcoubard	1131:692ddf04fc42	250	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	251	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	252	* ble.getAddress(...) should be replaced with
vcoubard	1131:692ddf04fc42	253	* ble.gap().getAddress(...).
vcoubard	1131:692ddf04fc42	254	*/
vcoubard	1135:22aada733dbd	255	ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::AddressBytes_t address) {
vcoubard	1131:692ddf04fc42	256	return gap().getAddress(typeP, address);
vcoubard	1131:692ddf04fc42	257	}
vcoubard	1131:692ddf04fc42	258
vcoubard	1131:692ddf04fc42	259	/**
vcoubard	1131:692ddf04fc42	260	* Set the GAP advertising mode to use for this device.
vcoubard	1131:692ddf04fc42	261	*
vcoubard	1131:692ddf04fc42	262	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	263	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	264	* ble.setAdvertisingType(...) should be replaced with
vcoubard	1131:692ddf04fc42	265	* ble.gap().setAdvertisingType(...).
vcoubard	1131:692ddf04fc42	266	*/
vcoubard	1131:692ddf04fc42	267	void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
vcoubard	1131:692ddf04fc42	268	gap().setAdvertisingType(advType);
vcoubard	1131:692ddf04fc42	269	}
vcoubard	1131:692ddf04fc42	270
vcoubard	1131:692ddf04fc42	271	/**
vcoubard	1131:692ddf04fc42	272	* @param[in] interval
vcoubard	1131:692ddf04fc42	273	* Advertising interval in units of milliseconds. Advertising
vcoubard	1131:692ddf04fc42	274	* is disabled if interval is 0. If interval is smaller than
vcoubard	1131:692ddf04fc42	275	* the minimum supported value, then the minimum supported
vcoubard	1131:692ddf04fc42	276	* value is used instead. This minimum value can be discovered
vcoubard	1131:692ddf04fc42	277	* using getMinAdvertisingInterval().
vcoubard	1131:692ddf04fc42	278	*
vcoubard	1131:692ddf04fc42	279	* This field must be set to 0 if connectionMode is equal
vcoubard	1131:692ddf04fc42	280	* to ADV_CONNECTABLE_DIRECTED.
vcoubard	1131:692ddf04fc42	281	*
vcoubard	1131:692ddf04fc42	282	* @note: Decreasing this value allows central devices to detect a
vcoubard	1131:692ddf04fc42	283	* peripheral faster, at the expense of more power being used by the radio
vcoubard	1131:692ddf04fc42	284	* due to the higher data transmit rate.
vcoubard	1131:692ddf04fc42	285	*
vcoubard	1131:692ddf04fc42	286	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	287	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	288	* ble.setAdvertisingInterval(...) should be replaced with
vcoubard	1131:692ddf04fc42	289	* ble.gap().setAdvertisingInterval(...).
vcoubard	1131:692ddf04fc42	290	*
vcoubard	1131:692ddf04fc42	291	* @note: [WARNING] This API previously used 0.625ms as the unit for its
vcoubard	1131:692ddf04fc42	292	* 'interval' argument. That required an explicit conversion from
vcoubard	1131:692ddf04fc42	293	* milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
vcoubard	1131:692ddf04fc42	294	* no longer required as the new units are milliseconds. Any application
vcoubard	1131:692ddf04fc42	295	* code depending on the old semantics needs to be updated accordingly.
vcoubard	1131:692ddf04fc42	296	*/
vcoubard	1131:692ddf04fc42	297	void setAdvertisingInterval(uint16_t interval) {
vcoubard	1131:692ddf04fc42	298	gap().setAdvertisingInterval(interval);
vcoubard	1131:692ddf04fc42	299	}
vcoubard	1131:692ddf04fc42	300
vcoubard	1131:692ddf04fc42	301	/**
vcoubard	1131:692ddf04fc42	302	* @return Minimum Advertising interval in milliseconds.
vcoubard	1131:692ddf04fc42	303	*
vcoubard	1131:692ddf04fc42	304	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	305	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	306	* ble.getMinAdvertisingInterval(...) should be replaced with
vcoubard	1131:692ddf04fc42	307	* ble.gap().getMinAdvertisingInterval(...).
vcoubard	1131:692ddf04fc42	308	*/
vcoubard	1131:692ddf04fc42	309	uint16_t getMinAdvertisingInterval(void) const {
vcoubard	1131:692ddf04fc42	310	return gap().getMinAdvertisingInterval();
vcoubard	1131:692ddf04fc42	311	}
vcoubard	1131:692ddf04fc42	312
vcoubard	1131:692ddf04fc42	313	/**
vcoubard	1131:692ddf04fc42	314	* @return Minimum Advertising interval in milliseconds for non-connectible mode.
vcoubard	1131:692ddf04fc42	315	*
vcoubard	1131:692ddf04fc42	316	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	317	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	318	* ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
vcoubard	1131:692ddf04fc42	319	* ble.gap().getMinNonConnectableAdvertisingInterval(...).
vcoubard	1131:692ddf04fc42	320	*/
vcoubard	1131:692ddf04fc42	321	uint16_t getMinNonConnectableAdvertisingInterval(void) const {
vcoubard	1131:692ddf04fc42	322	return gap().getMinNonConnectableAdvertisingInterval();
vcoubard	1131:692ddf04fc42	323	}
vcoubard	1131:692ddf04fc42	324
vcoubard	1131:692ddf04fc42	325	/**
vcoubard	1131:692ddf04fc42	326	* @return Maximum Advertising interval in milliseconds.
vcoubard	1131:692ddf04fc42	327	*
vcoubard	1131:692ddf04fc42	328	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	329	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	330	* ble.getMaxAdvertisingInterval(...) should be replaced with
vcoubard	1131:692ddf04fc42	331	* ble.gap().getMaxAdvertisingInterval(...).
vcoubard	1131:692ddf04fc42	332	*/
vcoubard	1131:692ddf04fc42	333	uint16_t getMaxAdvertisingInterval(void) const {
vcoubard	1131:692ddf04fc42	334	return gap().getMaxAdvertisingInterval();
vcoubard	1131:692ddf04fc42	335	}
vcoubard	1131:692ddf04fc42	336
vcoubard	1131:692ddf04fc42	337	/**
vcoubard	1131:692ddf04fc42	338	* @param[in] timeout
vcoubard	1131:692ddf04fc42	339	* Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
vcoubard	1131:692ddf04fc42	340	* and 16383). Use 0 to disable the advertising timeout.
vcoubard	1131:692ddf04fc42	341	*
vcoubard	1131:692ddf04fc42	342	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	343	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	344	* ble.setAdvertisingTimeout(...) should be replaced with
vcoubard	1131:692ddf04fc42	345	* ble.gap().setAdvertisingTimeout(...).
vcoubard	1131:692ddf04fc42	346	*/
vcoubard	1131:692ddf04fc42	347	void setAdvertisingTimeout(uint16_t timeout) {
vcoubard	1131:692ddf04fc42	348	gap().setAdvertisingTimeout(timeout);
vcoubard	1131:692ddf04fc42	349	}
vcoubard	1131:692ddf04fc42	350
vcoubard	1131:692ddf04fc42	351	/**
vcoubard	1131:692ddf04fc42	352	* Set up a particular, user-constructed set of advertisement parameters for
vcoubard	1131:692ddf04fc42	353	* the underlying stack. It would be uncommon for this API to be used
vcoubard	1131:692ddf04fc42	354	* directly; there are other APIs to tweak advertisement parameters
vcoubard	1131:692ddf04fc42	355	* individually (see above).
vcoubard	1131:692ddf04fc42	356	*
vcoubard	1131:692ddf04fc42	357	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	358	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	359	* ble.setAdvertisingParams(...) should be replaced with
vcoubard	1131:692ddf04fc42	360	* ble.gap().setAdvertisingParams(...).
vcoubard	1131:692ddf04fc42	361	*/
vcoubard	1131:692ddf04fc42	362	void setAdvertisingParams(const GapAdvertisingParams &advParams) {
vcoubard	1131:692ddf04fc42	363	gap().setAdvertisingParams(advParams);
vcoubard	1131:692ddf04fc42	364	}
vcoubard	1131:692ddf04fc42	365
vcoubard	1131:692ddf04fc42	366	/**
vcoubard	1131:692ddf04fc42	367	* @return Read back advertising parameters. Useful for storing and
vcoubard	1131:692ddf04fc42	368	* restoring parameters rapidly.
vcoubard	1131:692ddf04fc42	369	*
vcoubard	1131:692ddf04fc42	370	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	371	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	372	* ble.getAdvertisingParams(...) should be replaced with
vcoubard	1131:692ddf04fc42	373	* ble.gap().getAdvertisingParams(...).
vcoubard	1131:692ddf04fc42	374	*/
vcoubard	1131:692ddf04fc42	375	const GapAdvertisingParams &getAdvertisingParams(void) const {
vcoubard	1131:692ddf04fc42	376	return gap().getAdvertisingParams();
vcoubard	1131:692ddf04fc42	377	}
vcoubard	1131:692ddf04fc42	378
vcoubard	1131:692ddf04fc42	379	/**
vcoubard	1131:692ddf04fc42	380	* Accumulate an AD structure in the advertising payload. Please note that
vcoubard	1131:692ddf04fc42	381	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard	1131:692ddf04fc42	382	* as an additional 31 bytes if the advertising payload is too
vcoubard	1131:692ddf04fc42	383	* small.
vcoubard	1131:692ddf04fc42	384	*
vcoubard	1131:692ddf04fc42	385	* @param[in] flags
vcoubard	1131:692ddf04fc42	386	* The flags to add. Please refer to
vcoubard	1131:692ddf04fc42	387	* GapAdvertisingData::Flags for valid flags. Multiple
vcoubard	1131:692ddf04fc42	388	* flags may be specified in combination.
vcoubard	1131:692ddf04fc42	389	*
vcoubard	1131:692ddf04fc42	390	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	391	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	392	* ble.accumulateAdvertisingPayload(flags) should be replaced with
vcoubard	1131:692ddf04fc42	393	* ble.gap().accumulateAdvertisingPayload(flags).
vcoubard	1131:692ddf04fc42	394	*/
vcoubard	1131:692ddf04fc42	395	ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
vcoubard	1131:692ddf04fc42	396	return gap().accumulateAdvertisingPayload(flags);
vcoubard	1131:692ddf04fc42	397	}
vcoubard	1131:692ddf04fc42	398
vcoubard	1131:692ddf04fc42	399	/**
vcoubard	1131:692ddf04fc42	400	* Accumulate an AD structure in the advertising payload. Please note that
vcoubard	1131:692ddf04fc42	401	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard	1131:692ddf04fc42	402	* as an additional 31 bytes if the advertising payload is too
vcoubard	1131:692ddf04fc42	403	* small.
vcoubard	1131:692ddf04fc42	404	*
vcoubard	1131:692ddf04fc42	405	* @param[in] app
vcoubard	1131:692ddf04fc42	406	* The appearance of the peripheral.
vcoubard	1131:692ddf04fc42	407	*
vcoubard	1131:692ddf04fc42	408	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	409	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	410	* ble.accumulateAdvertisingPayload(appearance) should be replaced with
vcoubard	1131:692ddf04fc42	411	* ble.gap().accumulateAdvertisingPayload(appearance).
vcoubard	1131:692ddf04fc42	412	*/
vcoubard	1131:692ddf04fc42	413	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
vcoubard	1131:692ddf04fc42	414	return gap().accumulateAdvertisingPayload(app);
vcoubard	1131:692ddf04fc42	415	}
vcoubard	1131:692ddf04fc42	416
vcoubard	1131:692ddf04fc42	417	/**
vcoubard	1131:692ddf04fc42	418	* Accumulate an AD structure in the advertising payload. Please note that
vcoubard	1131:692ddf04fc42	419	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard	1131:692ddf04fc42	420	* as an additional 31 bytes if the advertising payload is too
vcoubard	1131:692ddf04fc42	421	* small.
vcoubard	1131:692ddf04fc42	422	*
vcoubard	1131:692ddf04fc42	423	* @param[in] app
vcoubard	1131:692ddf04fc42	424	* The max transmit power to be used by the controller. This
vcoubard	1131:692ddf04fc42	425	* is only a hint.
vcoubard	1131:692ddf04fc42	426	*
vcoubard	1131:692ddf04fc42	427	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	428	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	429	* ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
vcoubard	1131:692ddf04fc42	430	* ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
vcoubard	1131:692ddf04fc42	431	*/
vcoubard	1131:692ddf04fc42	432	ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
vcoubard	1131:692ddf04fc42	433	return gap().accumulateAdvertisingPayloadTxPower(power);
vcoubard	1131:692ddf04fc42	434	}
vcoubard	1131:692ddf04fc42	435
vcoubard	1131:692ddf04fc42	436	/**
vcoubard	1131:692ddf04fc42	437	* Accumulate a variable length byte-stream as an AD structure in the
vcoubard	1131:692ddf04fc42	438	* advertising payload. Please note that the payload is limited to 31 bytes.
vcoubard	1131:692ddf04fc42	439	* The SCAN_RESPONSE message may be used as an additional 31 bytes if the
vcoubard	1131:692ddf04fc42	440	* advertising payload is too small.
vcoubard	1131:692ddf04fc42	441	*
vcoubard	1131:692ddf04fc42	442	* @param type The type that describes the variable length data.
vcoubard	1131:692ddf04fc42	443	* @param data Data bytes.
vcoubard	1131:692ddf04fc42	444	* @param len Data length.
vcoubard	1131:692ddf04fc42	445	*
vcoubard	1131:692ddf04fc42	446	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	447	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	448	* ble.accumulateAdvertisingPayload(...) should be replaced with
vcoubard	1131:692ddf04fc42	449	* ble.gap().accumulateAdvertisingPayload(...).
vcoubard	1131:692ddf04fc42	450	*/
vcoubard	1131:692ddf04fc42	451	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard	1131:692ddf04fc42	452	return gap().accumulateAdvertisingPayload(type, data, len);
vcoubard	1131:692ddf04fc42	453	}
vcoubard	1131:692ddf04fc42	454
vcoubard	1131:692ddf04fc42	455	/**
vcoubard	1131:692ddf04fc42	456	* Setup a particular, user-constructed advertisement payload for the
vcoubard	1131:692ddf04fc42	457	* underlying stack. It would be uncommon for this API to be used directly;
vcoubard	1131:692ddf04fc42	458	* there are other APIs to build an advertisement payload (see above).
vcoubard	1131:692ddf04fc42	459	*
vcoubard	1131:692ddf04fc42	460	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	461	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	462	* ble.setAdvertisingData(...) should be replaced with
vcoubard	1131:692ddf04fc42	463	* ble.gap().setAdvertisingPayload(...).
vcoubard	1131:692ddf04fc42	464	*/
vcoubard	1131:692ddf04fc42	465	ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
vcoubard	1131:692ddf04fc42	466	return gap().setAdvertisingPayload(advData);
vcoubard	1131:692ddf04fc42	467	}
vcoubard	1131:692ddf04fc42	468
vcoubard	1131:692ddf04fc42	469	/**
vcoubard	1131:692ddf04fc42	470	* @return Read back advertising data. Useful for storing and
vcoubard	1131:692ddf04fc42	471	* restoring payload.
vcoubard	1131:692ddf04fc42	472	*
vcoubard	1131:692ddf04fc42	473	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	474	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	475	* ble.getAdvertisingData(...) should be replaced with
vcoubard	1131:692ddf04fc42	476	* ble.gap().getAdvertisingPayload()(...).
vcoubard	1131:692ddf04fc42	477	*/
vcoubard	1131:692ddf04fc42	478	const GapAdvertisingData &getAdvertisingData(void) const {
vcoubard	1131:692ddf04fc42	479	return gap().getAdvertisingPayload();
vcoubard	1131:692ddf04fc42	480	}
vcoubard	1131:692ddf04fc42	481
vcoubard	1131:692ddf04fc42	482	/**
vcoubard	1131:692ddf04fc42	483	* Reset any advertising payload prepared from prior calls to
vcoubard	1131:692ddf04fc42	484	* accumulateAdvertisingPayload(). This automatically propagates the re-
vcoubard	1131:692ddf04fc42	485	* initialized advertising payload to the underlying stack.
vcoubard	1131:692ddf04fc42	486	*
vcoubard	1131:692ddf04fc42	487	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	488	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	489	* ble.clearAdvertisingPayload(...) should be replaced with
vcoubard	1131:692ddf04fc42	490	* ble.gap().clearAdvertisingPayload(...).
vcoubard	1131:692ddf04fc42	491	*/
vcoubard	1131:692ddf04fc42	492	void clearAdvertisingPayload(void) {
vcoubard	1131:692ddf04fc42	493	gap().clearAdvertisingPayload();
vcoubard	1131:692ddf04fc42	494	}
vcoubard	1131:692ddf04fc42	495
vcoubard	1131:692ddf04fc42	496	/**
vcoubard	1131:692ddf04fc42	497	* This API is deprecated and resolves to a no-operation. It is left here
vcoubard	1131:692ddf04fc42	498	* to allow older code to compile. Please avoid using this API in new code.
vcoubard	1131:692ddf04fc42	499	* This API will be dropped in a future release.
vcoubard	1131:692ddf04fc42	500	*
vcoubard	1131:692ddf04fc42	501	* Formerly, it would be used to dynamically reset the accumulated advertising
vcoubard	1131:692ddf04fc42	502	* payload and scanResponse; to do this, the application would clear and re-
vcoubard	1131:692ddf04fc42	503	* accumulate a new advertising payload (and scanResponse) before using this
vcoubard	1131:692ddf04fc42	504	* API. Updates to the underlying advertisement payload now happen
vcoubard	1131:692ddf04fc42	505	* implicitly.
vcoubard	1131:692ddf04fc42	506	*/
vcoubard	1131:692ddf04fc42	507	ble_error_t setAdvertisingPayload(void) {
vcoubard	1131:692ddf04fc42	508	return BLE_ERROR_NONE;
vcoubard	1131:692ddf04fc42	509	}
vcoubard	1131:692ddf04fc42	510
vcoubard	1131:692ddf04fc42	511	/**
vcoubard	1131:692ddf04fc42	512	* Accumulate a variable length byte-stream as an AD structure in the
vcoubard	1131:692ddf04fc42	513	* scanResponse payload.
vcoubard	1131:692ddf04fc42	514	*
vcoubard	1131:692ddf04fc42	515	* @param[in] type The type that describes the variable length data.
vcoubard	1131:692ddf04fc42	516	* @param[in] data Data bytes.
vcoubard	1131:692ddf04fc42	517	* @param[in] len Data length.
vcoubard	1131:692ddf04fc42	518	*
vcoubard	1131:692ddf04fc42	519	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	520	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	521	* ble.accumulateScanResponse(...) should be replaced with
vcoubard	1131:692ddf04fc42	522	* ble.gap().accumulateScanResponse(...).
vcoubard	1131:692ddf04fc42	523	*/
vcoubard	1131:692ddf04fc42	524	ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard	1131:692ddf04fc42	525	return gap().accumulateScanResponse(type, data, len);
vcoubard	1131:692ddf04fc42	526	}
vcoubard	1131:692ddf04fc42	527
vcoubard	1131:692ddf04fc42	528	/**
vcoubard	1131:692ddf04fc42	529	* Reset any scan response prepared from prior calls to
vcoubard	1131:692ddf04fc42	530	* accumulateScanResponse().
vcoubard	1131:692ddf04fc42	531	*
vcoubard	1131:692ddf04fc42	532	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	533	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	534	* ble.clearScanResponse(...) should be replaced with
vcoubard	1131:692ddf04fc42	535	* ble.gap().clearScanResponse(...).
vcoubard	1131:692ddf04fc42	536	*/
vcoubard	1131:692ddf04fc42	537	void clearScanResponse(void) {
vcoubard	1131:692ddf04fc42	538	gap().clearScanResponse();
vcoubard	1131:692ddf04fc42	539	}
vcoubard	1131:692ddf04fc42	540
vcoubard	1131:692ddf04fc42	541	/**
vcoubard	1131:692ddf04fc42	542	* Start advertising.
vcoubard	1131:692ddf04fc42	543	*
vcoubard	1131:692ddf04fc42	544	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	545	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	546	* ble.startAdvertising(...) should be replaced with
vcoubard	1131:692ddf04fc42	547	* ble.gap().startAdvertising(...).
vcoubard	1131:692ddf04fc42	548	*/
vcoubard	1131:692ddf04fc42	549	ble_error_t startAdvertising(void) {
vcoubard	1131:692ddf04fc42	550	return gap().startAdvertising();
vcoubard	1131:692ddf04fc42	551	}
vcoubard	1131:692ddf04fc42	552
vcoubard	1131:692ddf04fc42	553	/**
vcoubard	1131:692ddf04fc42	554	* Stop advertising.
vcoubard	1131:692ddf04fc42	555	*
vcoubard	1131:692ddf04fc42	556	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	557	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	558	* ble.stopAdvertising(...) should be replaced with
vcoubard	1131:692ddf04fc42	559	* ble.gap().stopAdvertising(...).
vcoubard	1131:692ddf04fc42	560	*/
vcoubard	1131:692ddf04fc42	561	ble_error_t stopAdvertising(void) {
vcoubard	1131:692ddf04fc42	562	return gap().stopAdvertising();
vcoubard	1131:692ddf04fc42	563	}
vcoubard	1131:692ddf04fc42	564
vcoubard	1131:692ddf04fc42	565	/**
vcoubard	1131:692ddf04fc42	566	* Set up parameters for GAP scanning (observer mode).
vcoubard	1131:692ddf04fc42	567	* @param[in] interval
vcoubard	1131:692ddf04fc42	568	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard	1131:692ddf04fc42	569	* @param[in] window
vcoubard	1131:692ddf04fc42	570	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard	1131:692ddf04fc42	571	* @param[in] timeout
vcoubard	1131:692ddf04fc42	572	* Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
vcoubard	1131:692ddf04fc42	573	* @param[in] activeScanning
vcoubard	1131:692ddf04fc42	574	* Set to True if active-scanning is required. This is used to fetch the
vcoubard	1131:692ddf04fc42	575	* scan response from a peer if possible.
vcoubard	1131:692ddf04fc42	576	*
vcoubard	1131:692ddf04fc42	577	* The scanning window divided by the interval determines the duty cycle for
vcoubard	1131:692ddf04fc42	578	* scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard	1131:692ddf04fc42	579	* then the controller will scan for 10 percent of the time. It is possible
vcoubard	1131:692ddf04fc42	580	* to have the interval and window set to the same value. In this case,
vcoubard	1131:692ddf04fc42	581	* scanning is continuous, with a change of scanning frequency once every
vcoubard	1131:692ddf04fc42	582	* interval.
vcoubard	1131:692ddf04fc42	583	*
vcoubard	1131:692ddf04fc42	584	* Once the scanning parameters have been configured, scanning can be
vcoubard	1131:692ddf04fc42	585	* enabled by using startScan().
vcoubard	1131:692ddf04fc42	586	*
vcoubard	1131:692ddf04fc42	587	* @Note: The scan interval and window are recommendations to the BLE stack.
vcoubard	1131:692ddf04fc42	588	*
vcoubard	1131:692ddf04fc42	589	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	590	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	591	* ble.setScanParams(...) should be replaced with
vcoubard	1131:692ddf04fc42	592	* ble.gap().setScanParams(...).
vcoubard	1131:692ddf04fc42	593	*/
vcoubard	1131:692ddf04fc42	594	ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
vcoubard	1131:692ddf04fc42	595	uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
vcoubard	1131:692ddf04fc42	596	uint16_t timeout = 0,
vcoubard	1131:692ddf04fc42	597	bool activeScanning = false) {
vcoubard	1131:692ddf04fc42	598	return gap().setScanParams(interval, window, timeout, activeScanning);
vcoubard	1131:692ddf04fc42	599	}
vcoubard	1131:692ddf04fc42	600
vcoubard	1131:692ddf04fc42	601	/**
vcoubard	1131:692ddf04fc42	602	* Set up the scanInterval parameter for GAP scanning (observer mode).
vcoubard	1131:692ddf04fc42	603	* @param[in] interval
vcoubard	1131:692ddf04fc42	604	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard	1131:692ddf04fc42	605	*
vcoubard	1131:692ddf04fc42	606	* The scanning window divided by the interval determines the duty cycle for
vcoubard	1131:692ddf04fc42	607	* scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard	1131:692ddf04fc42	608	* then the controller will scan for 10 percent of the time. It is possible
vcoubard	1131:692ddf04fc42	609	* to have the interval and window set to the same value. In this case,
vcoubard	1131:692ddf04fc42	610	* scanning is continuous, with a change of scanning frequency once every
vcoubard	1131:692ddf04fc42	611	* interval.
vcoubard	1131:692ddf04fc42	612	*
vcoubard	1131:692ddf04fc42	613	* Once the scanning parameters have been configured, scanning can be
vcoubard	1131:692ddf04fc42	614	* enabled by using startScan().
vcoubard	1131:692ddf04fc42	615	*
vcoubard	1131:692ddf04fc42	616	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	617	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	618	* ble.setScanInterval(interval) should be replaced with
vcoubard	1131:692ddf04fc42	619	* ble.gap().setScanInterval(interval).
vcoubard	1131:692ddf04fc42	620	*/
vcoubard	1131:692ddf04fc42	621	ble_error_t setScanInterval(uint16_t interval) {
vcoubard	1131:692ddf04fc42	622	return gap().setScanInterval(interval);
vcoubard	1131:692ddf04fc42	623	}
vcoubard	1131:692ddf04fc42	624
vcoubard	1131:692ddf04fc42	625	/**
vcoubard	1131:692ddf04fc42	626	* Set up the scanWindow parameter for GAP scanning (observer mode).
vcoubard	1131:692ddf04fc42	627	* @param[in] window
vcoubard	1131:692ddf04fc42	628	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard	1131:692ddf04fc42	629	*
vcoubard	1131:692ddf04fc42	630	* The scanning window divided by the interval determines the duty cycle for
vcoubard	1131:692ddf04fc42	631	* scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard	1131:692ddf04fc42	632	* then the controller will scan for 10 percent of the time. It is possible
vcoubard	1131:692ddf04fc42	633	* to have the interval and window set to the same value. In this case,
vcoubard	1131:692ddf04fc42	634	* scanning is continuous, with a change of scanning frequency once every
vcoubard	1131:692ddf04fc42	635	* interval.
vcoubard	1131:692ddf04fc42	636	*
vcoubard	1131:692ddf04fc42	637	* Once the scanning parameters have been configured, scanning can be
vcoubard	1131:692ddf04fc42	638	* enabled by using startScan().
vcoubard	1131:692ddf04fc42	639	*
vcoubard	1131:692ddf04fc42	640	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	641	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	642	* ble.setScanWindow(window) should be replaced with
vcoubard	1131:692ddf04fc42	643	* ble.gap().setScanWindow(window).
vcoubard	1131:692ddf04fc42	644	*/
vcoubard	1131:692ddf04fc42	645	ble_error_t setScanWindow(uint16_t window) {
vcoubard	1131:692ddf04fc42	646	return gap().setScanWindow(window);
vcoubard	1131:692ddf04fc42	647	}
vcoubard	1131:692ddf04fc42	648
vcoubard	1131:692ddf04fc42	649	/**
vcoubard	1131:692ddf04fc42	650	* Set up parameters for GAP scanning (observer mode).
vcoubard	1131:692ddf04fc42	651	* @param[in] timeout
vcoubard	1131:692ddf04fc42	652	* Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
vcoubard	1131:692ddf04fc42	653	*
vcoubard	1131:692ddf04fc42	654	* The scanning window divided by the interval determines the duty cycle for
vcoubard	1131:692ddf04fc42	655	* scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard	1131:692ddf04fc42	656	* then the controller will scan for 10 percent of the time. It is possible
vcoubard	1131:692ddf04fc42	657	* to have the interval and window set to the same value. In this case,
vcoubard	1131:692ddf04fc42	658	* scanning is continuous, with a change of scanning frequency once every
vcoubard	1131:692ddf04fc42	659	* interval.
vcoubard	1131:692ddf04fc42	660	*
vcoubard	1131:692ddf04fc42	661	* Once the scanning parameters have been configured, scanning can be
vcoubard	1131:692ddf04fc42	662	* enabled by using startScan().
vcoubard	1131:692ddf04fc42	663	*
vcoubard	1131:692ddf04fc42	664	* @Note: The scan interval and window are recommendations to the BLE stack.
vcoubard	1131:692ddf04fc42	665	*
vcoubard	1131:692ddf04fc42	666	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	667	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	668	* ble.setScanTimeout(...) should be replaced with
vcoubard	1131:692ddf04fc42	669	* ble.gap().setScanTimeout(...).
vcoubard	1131:692ddf04fc42	670	*/
vcoubard	1131:692ddf04fc42	671	ble_error_t setScanTimeout(uint16_t timeout) {
vcoubard	1131:692ddf04fc42	672	return gap().setScanTimeout(timeout);
vcoubard	1131:692ddf04fc42	673	}
vcoubard	1131:692ddf04fc42	674
vcoubard	1131:692ddf04fc42	675	/**
vcoubard	1131:692ddf04fc42	676	* Set up parameters for GAP scanning (observer mode).
vcoubard	1131:692ddf04fc42	677	* @param[in] activeScanning
vcoubard	1131:692ddf04fc42	678	* Set to True if active-scanning is required. This is used to fetch the
vcoubard	1131:692ddf04fc42	679	* scan response from a peer if possible.
vcoubard	1131:692ddf04fc42	680	*
vcoubard	1131:692ddf04fc42	681	* Once the scanning parameters have been configured, scanning can be
vcoubard	1131:692ddf04fc42	682	* enabled by using startScan().
vcoubard	1131:692ddf04fc42	683	*
vcoubard	1131:692ddf04fc42	684	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	685	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	686	* ble.setActiveScan(...) should be replaced with
vcoubard	1131:692ddf04fc42	687	* ble.gap().setActiveScanning(...).
vcoubard	1131:692ddf04fc42	688	*/
vcoubard	1131:692ddf04fc42	689	void setActiveScan(bool activeScanning) {
vcoubard	1131:692ddf04fc42	690	gap().setActiveScanning(activeScanning);
vcoubard	1131:692ddf04fc42	691	}
vcoubard	1131:692ddf04fc42	692
vcoubard	1131:692ddf04fc42	693	/**
vcoubard	1131:692ddf04fc42	694	* Start scanning (Observer Procedure) based on the parameters currently in
vcoubard	1131:692ddf04fc42	695	* effect.
vcoubard	1131:692ddf04fc42	696	*
vcoubard	1131:692ddf04fc42	697	* @param[in] callback
vcoubard	1131:692ddf04fc42	698	* The application-specific callback to be invoked upon
vcoubard	1131:692ddf04fc42	699	* receiving every advertisement report. This can be passed in
vcoubard	1131:692ddf04fc42	700	* as NULL, in which case scanning may not be enabled at all.
vcoubard	1131:692ddf04fc42	701	*
vcoubard	1131:692ddf04fc42	702	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	703	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	704	* ble.startScan(callback) should be replaced with
vcoubard	1131:692ddf04fc42	705	* ble.gap().startScan(callback).
vcoubard	1131:692ddf04fc42	706	*/
vcoubard	1131:692ddf04fc42	707	ble_error_t startScan(void (callback)(const Gap::AdvertisementCallbackParams_t params)) {
vcoubard	1131:692ddf04fc42	708	return gap().startScan(callback);
vcoubard	1131:692ddf04fc42	709	}
vcoubard	1131:692ddf04fc42	710
vcoubard	1131:692ddf04fc42	711	/**
vcoubard	1131:692ddf04fc42	712	* Same as above, but this takes an (object, method) pair for a callback.
vcoubard	1131:692ddf04fc42	713	*
vcoubard	1131:692ddf04fc42	714	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	715	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	716	* ble.startScan(callback) should be replaced with
vcoubard	1131:692ddf04fc42	717	* ble.gap().startScan(object, callback).
vcoubard	1131:692ddf04fc42	718	*/
vcoubard	1131:692ddf04fc42	719	template<typename T>
vcoubard	1131:692ddf04fc42	720	ble_error_t startScan(T object, void (T::memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
vcoubard	1131:692ddf04fc42	721
vcoubard	1131:692ddf04fc42	722	/**
vcoubard	1131:692ddf04fc42	723	* Stop scanning. The current scanning parameters remain in effect.
vcoubard	1131:692ddf04fc42	724	*
vcoubard	1131:692ddf04fc42	725	* @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
vcoubard	1131:692ddf04fc42	726	*
vcoubard	1131:692ddf04fc42	727	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	728	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	729	* ble.stopScan() should be replaced with
vcoubard	1131:692ddf04fc42	730	* ble.gap().stopScan().
vcoubard	1131:692ddf04fc42	731	*/
vcoubard	1131:692ddf04fc42	732	ble_error_t stopScan(void) {
vcoubard	1131:692ddf04fc42	733	return gap().stopScan();
vcoubard	1131:692ddf04fc42	734	}
vcoubard	1131:692ddf04fc42	735
vcoubard	1131:692ddf04fc42	736	/**
vcoubard	1131:692ddf04fc42	737	* Create a connection (GAP Link Establishment).
vcoubard	1131:692ddf04fc42	738	* @param peerAddr
vcoubard	1131:692ddf04fc42	739	* 48-bit address, LSB format.
vcoubard	1131:692ddf04fc42	740	* @param peerAddrType
vcoubard	1131:692ddf04fc42	741	* Address type of the peer.
vcoubard	1131:692ddf04fc42	742	* @param connectionParams
vcoubard	1131:692ddf04fc42	743	* Connection parameters.
vcoubard	1131:692ddf04fc42	744	* @param scanParams
vcoubard	1131:692ddf04fc42	745	* Paramters to use while scanning for the peer.
vcoubard	1131:692ddf04fc42	746	* @return BLE_ERROR_NONE if connection establishment procedure is started
vcoubard	1131:692ddf04fc42	747	* successfully. The onConnection callback (if set) is invoked upon
vcoubard	1131:692ddf04fc42	748	* a connection event.
vcoubard	1131:692ddf04fc42	749	*
vcoubard	1131:692ddf04fc42	750	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	751	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	752	* ble.connect(...) should be replaced with
vcoubard	1131:692ddf04fc42	753	* ble.gap().connect(...).
vcoubard	1131:692ddf04fc42	754	*/
vcoubard	1135:22aada733dbd	755	ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard	1135:22aada733dbd	756	BLEProtocol::AddressType_t peerAddrType = BLEProtocol::AddressType::RANDOM_STATIC,
vcoubard	1135:22aada733dbd	757	const Gap::ConnectionParams_t *connectionParams = NULL,
vcoubard	1135:22aada733dbd	758	const GapScanningParams *scanParams = NULL) {
vcoubard	1131:692ddf04fc42	759	return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
vcoubard	1131:692ddf04fc42	760	}
vcoubard	1131:692ddf04fc42	761
vcoubard	1131:692ddf04fc42	762	/**
vcoubard	1131:692ddf04fc42	763	* This call initiates the disconnection procedure, and its completion is
vcoubard	1131:692ddf04fc42	764	* communicated to the application with an invocation of the
vcoubard	1131:692ddf04fc42	765	* onDisconnection callback.
vcoubard	1131:692ddf04fc42	766	*
vcoubard	1131:692ddf04fc42	767	* @param[in] connectionHandle
vcoubard	1131:692ddf04fc42	768	* @param[in] reason
vcoubard	1131:692ddf04fc42	769	* The reason for disconnection; sent back to the peer.
vcoubard	1131:692ddf04fc42	770	*/
vcoubard	1131:692ddf04fc42	771	ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
vcoubard	1131:692ddf04fc42	772	return gap().disconnect(connectionHandle, reason);
vcoubard	1131:692ddf04fc42	773	}
vcoubard	1131:692ddf04fc42	774
vcoubard	1131:692ddf04fc42	775	/**
vcoubard	1135:22aada733dbd	776	* This call initiates the disconnection procedure, and its completion
vcoubard	1131:692ddf04fc42	777	* is communicated to the application with an invocation of the
vcoubard	1131:692ddf04fc42	778	* onDisconnection callback.
vcoubard	1131:692ddf04fc42	779	*
vcoubard	1131:692ddf04fc42	780	* @param reason
vcoubard	1131:692ddf04fc42	781	* The reason for disconnection; sent back to the peer.
vcoubard	1131:692ddf04fc42	782	*
vcoubard	1131:692ddf04fc42	783	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	784	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	785	* ble.disconnect(reason) should be replaced with
vcoubard	1131:692ddf04fc42	786	* ble.gap().disconnect(reason).
vcoubard	1131:692ddf04fc42	787	*
vcoubard	1131:692ddf04fc42	788	* @note: This version of disconnect() doesn't take a connection handle. It
vcoubard	1131:692ddf04fc42	789	* works reliably only for stacks that are limited to a single
vcoubard	1131:692ddf04fc42	790	* connection. This API should be considered deprecated in favour of the
vcoubard	1131:692ddf04fc42	791	* alternative, which takes a connection handle. It will be dropped in the future.
vcoubard	1131:692ddf04fc42	792	*/
vcoubard	1131:692ddf04fc42	793	ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
vcoubard	1131:692ddf04fc42	794	return gap().disconnect(reason);
vcoubard	1131:692ddf04fc42	795	}
vcoubard	1131:692ddf04fc42	796
vcoubard	1131:692ddf04fc42	797	/**
vcoubard	1131:692ddf04fc42	798	* Returns the current GAP state of the device using a bitmask that
vcoubard	1131:692ddf04fc42	799	* describes whether the device is advertising or connected.
vcoubard	1131:692ddf04fc42	800	*
vcoubard	1131:692ddf04fc42	801	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	802	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	803	* ble.getGapState() should be replaced with
vcoubard	1131:692ddf04fc42	804	* ble.gap().getState().
vcoubard	1131:692ddf04fc42	805	*/
vcoubard	1131:692ddf04fc42	806	Gap::GapState_t getGapState(void) const {
vcoubard	1131:692ddf04fc42	807	return gap().getState();
vcoubard	1131:692ddf04fc42	808	}
vcoubard	1131:692ddf04fc42	809
vcoubard	1131:692ddf04fc42	810	/**
vcoubard	1131:692ddf04fc42	811	* Get the GAP peripheral's preferred connection parameters. These are the
vcoubard	1131:692ddf04fc42	812	* defaults that the peripheral would like to have in a connection. The
vcoubard	1131:692ddf04fc42	813	* choice of the connection parameters is eventually up to the central.
vcoubard	1131:692ddf04fc42	814	*
vcoubard	1131:692ddf04fc42	815	* @param[out] params
vcoubard	1131:692ddf04fc42	816	* The structure where the parameters will be stored. Memory
vcoubard	1131:692ddf04fc42	817	* for this is owned by the caller.
vcoubard	1131:692ddf04fc42	818	*
vcoubard	1131:692ddf04fc42	819	* @return BLE_ERROR_NONE if the parameters were successfully filled into
vcoubard	1131:692ddf04fc42	820	* the given structure pointed to by params.
vcoubard	1131:692ddf04fc42	821	*
vcoubard	1131:692ddf04fc42	822	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	823	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	824	* ble.getPreferredConnectionParams() should be replaced with
vcoubard	1131:692ddf04fc42	825	* ble.gap().getPreferredConnectionParams().
vcoubard	1131:692ddf04fc42	826	*/
vcoubard	1131:692ddf04fc42	827	ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
vcoubard	1131:692ddf04fc42	828	return gap().getPreferredConnectionParams(params);
vcoubard	1131:692ddf04fc42	829	}
vcoubard	1131:692ddf04fc42	830
vcoubard	1131:692ddf04fc42	831	/**
vcoubard	1131:692ddf04fc42	832	* Set the GAP peripheral's preferred connection parameters. These are the
vcoubard	1131:692ddf04fc42	833	* defaults that the peripheral would like to have in a connection. The
vcoubard	1131:692ddf04fc42	834	* choice of the connection parameters is eventually up to the central.
vcoubard	1131:692ddf04fc42	835	*
vcoubard	1131:692ddf04fc42	836	* @param[in] params
vcoubard	1131:692ddf04fc42	837	* The structure containing the desired parameters.
vcoubard	1131:692ddf04fc42	838	*
vcoubard	1131:692ddf04fc42	839	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	840	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	841	* ble.setPreferredConnectionParams() should be replaced with
vcoubard	1131:692ddf04fc42	842	* ble.gap().setPreferredConnectionParams().
vcoubard	1131:692ddf04fc42	843	*/
vcoubard	1131:692ddf04fc42	844	ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
vcoubard	1131:692ddf04fc42	845	return gap().setPreferredConnectionParams(params);
vcoubard	1131:692ddf04fc42	846	}
vcoubard	1131:692ddf04fc42	847
vcoubard	1131:692ddf04fc42	848	/**
vcoubard	1131:692ddf04fc42	849	* Update connection parameters while in the peripheral role.
vcoubard	1131:692ddf04fc42	850	* @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
vcoubard	1131:692ddf04fc42	851	* the central to perform the procedure.
vcoubard	1131:692ddf04fc42	852	* @param[in] handle
vcoubard	1131:692ddf04fc42	853	* Connection Handle
vcoubard	1131:692ddf04fc42	854	* @param[in] params
vcoubard	1131:692ddf04fc42	855	* Pointer to desired connection parameters. If NULL is provided on a peripheral role,
vcoubard	1131:692ddf04fc42	856	* the parameters in the PPCP characteristic of the GAP service will be used instead.
vcoubard	1131:692ddf04fc42	857	*
vcoubard	1131:692ddf04fc42	858	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	859	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	860	* ble.updateConnectionParams() should be replaced with
vcoubard	1131:692ddf04fc42	861	* ble.gap().updateConnectionParams().
vcoubard	1131:692ddf04fc42	862	*/
vcoubard	1131:692ddf04fc42	863	ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
vcoubard	1131:692ddf04fc42	864	return gap().updateConnectionParams(handle, params);
vcoubard	1131:692ddf04fc42	865	}
vcoubard	1131:692ddf04fc42	866
vcoubard	1131:692ddf04fc42	867	/**
vcoubard	1131:692ddf04fc42	868	* Set the device name characteristic in the GAP service.
vcoubard	1131:692ddf04fc42	869	* @param[in] deviceName
vcoubard	1131:692ddf04fc42	870	* The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
vcoubard	1131:692ddf04fc42	871	*
vcoubard	1131:692ddf04fc42	872	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	873	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	874	* ble.setDeviceName() should be replaced with
vcoubard	1131:692ddf04fc42	875	* ble.gap().setDeviceName().
vcoubard	1131:692ddf04fc42	876	*/
vcoubard	1131:692ddf04fc42	877	ble_error_t setDeviceName(const uint8_t *deviceName) {
vcoubard	1131:692ddf04fc42	878	return gap().setDeviceName(deviceName);
vcoubard	1131:692ddf04fc42	879	}
vcoubard	1131:692ddf04fc42	880
vcoubard	1131:692ddf04fc42	881	/**
vcoubard	1131:692ddf04fc42	882	* Get the value of the device name characteristic in the GAP service.
vcoubard	1131:692ddf04fc42	883	* @param[out] deviceName
vcoubard	1131:692ddf04fc42	884	* Pointer to an empty buffer where the UTF-8 *non NULL-
vcoubard	1131:692ddf04fc42	885	* terminated* string will be placed. Set this
vcoubard	1131:692ddf04fc42	886	* value to NULL in order to obtain the deviceName-length
vcoubard	1131:692ddf04fc42	887	* from the 'length' parameter.
vcoubard	1131:692ddf04fc42	888	*
vcoubard	1131:692ddf04fc42	889	* @param[in/out] lengthP
vcoubard	1131:692ddf04fc42	890	* (on input) Length of the buffer pointed to by deviceName;
vcoubard	1131:692ddf04fc42	891	* (on output) the complete device name length (without the
vcoubard	1131:692ddf04fc42	892	* null terminator).
vcoubard	1131:692ddf04fc42	893	*
vcoubard	1131:692ddf04fc42	894	* @note If the device name is longer than the size of the supplied buffer,
vcoubard	1131:692ddf04fc42	895	* length will return the complete device name length, and not the
vcoubard	1131:692ddf04fc42	896	* number of bytes actually returned in deviceName. The application may
vcoubard	1131:692ddf04fc42	897	* use this information to retry with a suitable buffer size.
vcoubard	1131:692ddf04fc42	898	*
vcoubard	1131:692ddf04fc42	899	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	900	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	901	* ble.getDeviceName() should be replaced with
vcoubard	1131:692ddf04fc42	902	* ble.gap().getDeviceName().
vcoubard	1131:692ddf04fc42	903	*/
vcoubard	1131:692ddf04fc42	904	ble_error_t getDeviceName(uint8_t deviceName, unsigned lengthP) {
vcoubard	1131:692ddf04fc42	905	return gap().getDeviceName(deviceName, lengthP);
vcoubard	1131:692ddf04fc42	906	}
vcoubard	1131:692ddf04fc42	907
vcoubard	1131:692ddf04fc42	908	/**
vcoubard	1131:692ddf04fc42	909	* Set the appearance characteristic in the GAP service.
vcoubard	1131:692ddf04fc42	910	* @param[in] appearance
vcoubard	1131:692ddf04fc42	911	* The new value for the device-appearance.
vcoubard	1131:692ddf04fc42	912	*
vcoubard	1131:692ddf04fc42	913	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	914	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	915	* ble.setAppearance() should be replaced with
vcoubard	1131:692ddf04fc42	916	* ble.gap().setAppearance().
vcoubard	1131:692ddf04fc42	917	*/
vcoubard	1131:692ddf04fc42	918	ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
vcoubard	1131:692ddf04fc42	919	return gap().setAppearance(appearance);
vcoubard	1131:692ddf04fc42	920	}
vcoubard	1131:692ddf04fc42	921
vcoubard	1131:692ddf04fc42	922	/**
vcoubard	1131:692ddf04fc42	923	* Get the appearance characteristic in the GAP service.
vcoubard	1131:692ddf04fc42	924	* @param[out] appearance
vcoubard	1131:692ddf04fc42	925	* The new value for the device-appearance.
vcoubard	1131:692ddf04fc42	926	*
vcoubard	1131:692ddf04fc42	927	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	928	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	929	* ble.getAppearance() should be replaced with
vcoubard	1131:692ddf04fc42	930	* ble.gap().getAppearance().
vcoubard	1131:692ddf04fc42	931	*/
vcoubard	1131:692ddf04fc42	932	ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
vcoubard	1131:692ddf04fc42	933	return gap().getAppearance(appearanceP);
vcoubard	1131:692ddf04fc42	934	}
vcoubard	1131:692ddf04fc42	935
vcoubard	1131:692ddf04fc42	936	/**
vcoubard	1131:692ddf04fc42	937	* Set the radio's transmit power.
vcoubard	1131:692ddf04fc42	938	* @param[in] txPower Radio transmit power in dBm.
vcoubard	1131:692ddf04fc42	939	*
vcoubard	1131:692ddf04fc42	940	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	941	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	942	* ble.setTxPower() should be replaced with
vcoubard	1131:692ddf04fc42	943	* ble.gap().setTxPower().
vcoubard	1131:692ddf04fc42	944	*/
vcoubard	1131:692ddf04fc42	945	ble_error_t setTxPower(int8_t txPower) {
vcoubard	1131:692ddf04fc42	946	return gap().setTxPower(txPower);
vcoubard	1131:692ddf04fc42	947	}
vcoubard	1131:692ddf04fc42	948
vcoubard	1131:692ddf04fc42	949	/**
vcoubard	1131:692ddf04fc42	950	* Query the underlying stack for permitted arguments for setTxPower().
vcoubard	1131:692ddf04fc42	951	*
vcoubard	1131:692ddf04fc42	952	* @param[out] valueArrayPP
vcoubard	1131:692ddf04fc42	953	* Out parameter to receive the immutable array of Tx values.
vcoubard	1131:692ddf04fc42	954	* @param[out] countP
vcoubard	1131:692ddf04fc42	955	* Out parameter to receive the array's size.
vcoubard	1131:692ddf04fc42	956	*
vcoubard	1131:692ddf04fc42	957	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	958	* You should use the parallel API from Gap directly. A former call to
vcoubard	1131:692ddf04fc42	959	* ble.getPermittedTxPowerValues() should be replaced with
vcoubard	1131:692ddf04fc42	960	* ble.gap().getPermittedTxPowerValues().
vcoubard	1131:692ddf04fc42	961	*/
vcoubard	1131:692ddf04fc42	962	void getPermittedTxPowerValues(const int8_t *valueArrayPP, size_t countP) {
vcoubard	1131:692ddf04fc42	963	gap().getPermittedTxPowerValues(valueArrayPP, countP);
vcoubard	1131:692ddf04fc42	964	}
vcoubard	1131:692ddf04fc42	965
vcoubard	1131:692ddf04fc42	966	/**
vcoubard	1131:692ddf04fc42	967	* Add a service declaration to the local server ATT table. Also add the
vcoubard	1131:692ddf04fc42	968	* characteristics contained within.
vcoubard	1131:692ddf04fc42	969	*
vcoubard	1131:692ddf04fc42	970	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	971	* You should use the parallel API from GattServer directly. A former call
vcoubard	1131:692ddf04fc42	972	* to ble.addService() should be replaced with
vcoubard	1131:692ddf04fc42	973	* ble.gattServer().addService().
vcoubard	1131:692ddf04fc42	974	*/
vcoubard	1131:692ddf04fc42	975	ble_error_t addService(GattService &service) {
vcoubard	1131:692ddf04fc42	976	return gattServer().addService(service);
vcoubard	1131:692ddf04fc42	977	}
vcoubard	1131:692ddf04fc42	978
vcoubard	1131:692ddf04fc42	979	/**
vcoubard	1131:692ddf04fc42	980	* Read the value of a characteristic from the local GattServer.
vcoubard	1131:692ddf04fc42	981	* @param[in] attributeHandle
vcoubard	1131:692ddf04fc42	982	* Attribute handle for the value attribute of the characteristic.
vcoubard	1131:692ddf04fc42	983	* @param[out] buffer
vcoubard	1131:692ddf04fc42	984	* A buffer to hold the value being read.
vcoubard	1131:692ddf04fc42	985	* @param[in/out] lengthP
vcoubard	1131:692ddf04fc42	986	* Length of the buffer being supplied. If the attribute
vcoubard	1131:692ddf04fc42	987	* value is longer than the size of the supplied buffer,
vcoubard	1131:692ddf04fc42	988	* this variable will return the total attribute value length
vcoubard	1131:692ddf04fc42	989	* (excluding offset). The application may use this
vcoubard	1131:692ddf04fc42	990	* information to allocate a suitable buffer size.
vcoubard	1131:692ddf04fc42	991	*
vcoubard	1131:692ddf04fc42	992	* @return BLE_ERROR_NONE if a value was read successfully into the buffer.
vcoubard	1131:692ddf04fc42	993	*
vcoubard	1131:692ddf04fc42	994	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	995	* You should use the parallel API from GattServer directly. A former call
vcoubard	1131:692ddf04fc42	996	* to ble.readCharacteristicValue() should be replaced with
vcoubard	1131:692ddf04fc42	997	* ble.gattServer().read().
vcoubard	1131:692ddf04fc42	998	*/
vcoubard	1131:692ddf04fc42	999	ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP) {
vcoubard	1131:692ddf04fc42	1000	return gattServer().read(attributeHandle, buffer, lengthP);
vcoubard	1131:692ddf04fc42	1001	}
vcoubard	1131:692ddf04fc42	1002
vcoubard	1131:692ddf04fc42	1003	/**
vcoubard	1131:692ddf04fc42	1004	* Read the value of a characteristic from the local GattServer.
vcoubard	1131:692ddf04fc42	1005	* @param[in] connectionHandle
vcoubard	1131:692ddf04fc42	1006	* Connection Handle.
vcoubard	1131:692ddf04fc42	1007	* @param[in] attributeHandle
vcoubard	1131:692ddf04fc42	1008	* Attribute handle for the value attribute of the characteristic.
vcoubard	1131:692ddf04fc42	1009	* @param[out] buffer
vcoubard	1131:692ddf04fc42	1010	* A buffer to hold the value being read.
vcoubard	1131:692ddf04fc42	1011	* @param[in/out] lengthP
vcoubard	1131:692ddf04fc42	1012	* Length of the buffer being supplied. If the attribute
vcoubard	1131:692ddf04fc42	1013	* value is longer than the size of the supplied buffer,
vcoubard	1131:692ddf04fc42	1014	* this variable will return the total attribute value length
vcoubard	1131:692ddf04fc42	1015	* (excluding offset). The application may use this
vcoubard	1131:692ddf04fc42	1016	* information to allocate a suitable buffer size.
vcoubard	1131:692ddf04fc42	1017	*
vcoubard	1131:692ddf04fc42	1018	* @return BLE_ERROR_NONE if a value was read successfully into the buffer.
vcoubard	1131:692ddf04fc42	1019	*
vcoubard	1131:692ddf04fc42	1020	* @note This API is a version of the above, with an additional connection handle
vcoubard	1131:692ddf04fc42	1021	* parameter to allow fetches for connection-specific multivalued
vcoubard	1131:692ddf04fc42	1022	* attributes (such as the CCCDs).
vcoubard	1131:692ddf04fc42	1023	*
vcoubard	1131:692ddf04fc42	1024	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1025	* You should use the parallel API from GattServer directly. A former call
vcoubard	1131:692ddf04fc42	1026	* to ble.readCharacteristicValue() should be replaced with
vcoubard	1131:692ddf04fc42	1027	* ble.gattServer().read().
vcoubard	1131:692ddf04fc42	1028	*/
vcoubard	1131:692ddf04fc42	1029	ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP) {
vcoubard	1131:692ddf04fc42	1030	return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
vcoubard	1131:692ddf04fc42	1031	}
vcoubard	1131:692ddf04fc42	1032
vcoubard	1131:692ddf04fc42	1033	/**
vcoubard	1131:692ddf04fc42	1034	* Update the value of a characteristic on the local GattServer.
vcoubard	1131:692ddf04fc42	1035	*
vcoubard	1131:692ddf04fc42	1036	* @param[in] attributeHandle
vcoubard	1131:692ddf04fc42	1037	* Handle for the value attribute of the characteristic.
vcoubard	1131:692ddf04fc42	1038	* @param[in] value
vcoubard	1131:692ddf04fc42	1039	* A pointer to a buffer holding the new value.
vcoubard	1131:692ddf04fc42	1040	* @param[in] size
vcoubard	1131:692ddf04fc42	1041	* Size of the new value (in bytes).
vcoubard	1131:692ddf04fc42	1042	* @param[in] localOnly
vcoubard	1131:692ddf04fc42	1043	* Should this update be kept on the local
vcoubard	1131:692ddf04fc42	1044	* GattServer regardless of the state of the
vcoubard	1131:692ddf04fc42	1045	* notify/indicate flag in the CCCD for this
vcoubard	1131:692ddf04fc42	1046	* characteristic? If set to true, no notification
vcoubard	1131:692ddf04fc42	1047	* or indication is generated.
vcoubard	1131:692ddf04fc42	1048	*
vcoubard	1131:692ddf04fc42	1049	* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
vcoubard	1131:692ddf04fc42	1050	*
vcoubard	1131:692ddf04fc42	1051	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1052	* You should use the parallel API from GattServer directly. A former call
vcoubard	1131:692ddf04fc42	1053	* to ble.updateCharacteristicValue() should be replaced with
vcoubard	1131:692ddf04fc42	1054	* ble.gattServer().write().
vcoubard	1131:692ddf04fc42	1055	*/
vcoubard	1131:692ddf04fc42	1056	ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
vcoubard	1131:692ddf04fc42	1057	const uint8_t *value,
vcoubard	1131:692ddf04fc42	1058	uint16_t size,
vcoubard	1131:692ddf04fc42	1059	bool localOnly = false) {
vcoubard	1131:692ddf04fc42	1060	return gattServer().write(attributeHandle, value, size, localOnly);
vcoubard	1131:692ddf04fc42	1061	}
vcoubard	1131:692ddf04fc42	1062
vcoubard	1131:692ddf04fc42	1063	/**
vcoubard	1131:692ddf04fc42	1064	* Update the value of a characteristic on the local GattServer. A version
vcoubard	1131:692ddf04fc42	1065	* of the above, with a connection handle parameter to allow updates
vcoubard	1131:692ddf04fc42	1066	* for connection-specific multivalued attributes (such as the CCCDs).
vcoubard	1131:692ddf04fc42	1067	*
vcoubard	1131:692ddf04fc42	1068	* @param[in] connectionHandle
vcoubard	1131:692ddf04fc42	1069	* Connection Handle.
vcoubard	1131:692ddf04fc42	1070	* @param[in] attributeHandle
vcoubard	1131:692ddf04fc42	1071	* Handle for the value attribute of the Characteristic.
vcoubard	1131:692ddf04fc42	1072	* @param[in] value
vcoubard	1131:692ddf04fc42	1073	* A pointer to a buffer holding the new value.
vcoubard	1131:692ddf04fc42	1074	* @param[in] size
vcoubard	1131:692ddf04fc42	1075	* Size of the new value (in bytes).
vcoubard	1131:692ddf04fc42	1076	* @param[in] localOnly
vcoubard	1131:692ddf04fc42	1077	* Should this update be kept on the local
vcoubard	1131:692ddf04fc42	1078	* GattServer regardless of the state of the
vcoubard	1131:692ddf04fc42	1079	* notify/indicate flag in the CCCD for this
vcoubard	1131:692ddf04fc42	1080	* Characteristic? If set to true, no notification
vcoubard	1131:692ddf04fc42	1081	* or indication is generated.
vcoubard	1131:692ddf04fc42	1082	*
vcoubard	1131:692ddf04fc42	1083	* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
vcoubard	1131:692ddf04fc42	1084	*
vcoubard	1131:692ddf04fc42	1085	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1086	* You should use the parallel API from GattServer directly. A former call
vcoubard	1131:692ddf04fc42	1087	* to ble.updateCharacteristicValue() should be replaced with
vcoubard	1131:692ddf04fc42	1088	* ble.gattServer().write().
vcoubard	1131:692ddf04fc42	1089	*/
vcoubard	1131:692ddf04fc42	1090	ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
vcoubard	1131:692ddf04fc42	1091	GattAttribute::Handle_t attributeHandle,
vcoubard	1131:692ddf04fc42	1092	const uint8_t *value,
vcoubard	1131:692ddf04fc42	1093	uint16_t size,
vcoubard	1131:692ddf04fc42	1094	bool localOnly = false) {
vcoubard	1131:692ddf04fc42	1095	return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
vcoubard	1131:692ddf04fc42	1096	}
vcoubard	1131:692ddf04fc42	1097
vcoubard	1131:692ddf04fc42	1098	/**
vcoubard	1131:692ddf04fc42	1099	* Enable the BLE stack's Security Manager. The Security Manager implements
vcoubard	1131:692ddf04fc42	1100	* the cryptographic algorithms and protocol exchanges that allow two
vcoubard	1131:692ddf04fc42	1101	* devices to securely exchange data and privately detect each other.
vcoubard	1131:692ddf04fc42	1102	* Calling this API is a prerequisite for encryption and pairing (bonding).
vcoubard	1131:692ddf04fc42	1103	*
vcoubard	1131:692ddf04fc42	1104	* @param[in] enableBonding Allow for bonding.
vcoubard	1131:692ddf04fc42	1105	* @param[in] requireMITM Require protection against man-in-the-middle attacks.
vcoubard	1131:692ddf04fc42	1106	* @param[in] iocaps To specify the I/O capabilities of this peripheral,
vcoubard	1131:692ddf04fc42	1107	* such as availability of a display or keyboard, to
vcoubard	1131:692ddf04fc42	1108	* support out-of-band exchanges of security data.
vcoubard	1131:692ddf04fc42	1109	* @param[in] passkey To specify a static passkey.
vcoubard	1131:692ddf04fc42	1110	*
vcoubard	1131:692ddf04fc42	1111	* @return BLE_ERROR_NONE on success.
vcoubard	1131:692ddf04fc42	1112	*
vcoubard	1131:692ddf04fc42	1113	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1114	* You should use the parallel API from SecurityManager directly. A former
vcoubard	1131:692ddf04fc42	1115	* call to ble.initializeSecurity(...) should be replaced with
vcoubard	1131:692ddf04fc42	1116	* ble.securityManager().init(...).
vcoubard	1131:692ddf04fc42	1117	*/
vcoubard	1131:692ddf04fc42	1118	ble_error_t initializeSecurity(bool enableBonding = true,
vcoubard	1131:692ddf04fc42	1119	bool requireMITM = true,
vcoubard	1131:692ddf04fc42	1120	SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
vcoubard	1131:692ddf04fc42	1121	const SecurityManager::Passkey_t passkey = NULL) {
vcoubard	1131:692ddf04fc42	1122	return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
vcoubard	1131:692ddf04fc42	1123	}
vcoubard	1131:692ddf04fc42	1124
vcoubard	1131:692ddf04fc42	1125	/**
vcoubard	1131:692ddf04fc42	1126	* Get the security status of a connection.
vcoubard	1131:692ddf04fc42	1127	*
vcoubard	1131:692ddf04fc42	1128	* @param[in] connectionHandle Handle to identify the connection.
vcoubard	1131:692ddf04fc42	1129	* @param[out] securityStatusP Security status.
vcoubard	1131:692ddf04fc42	1130	*
vcoubard	1131:692ddf04fc42	1131	* @return BLE_SUCCESS or appropriate error code indicating the reason of failure.
vcoubard	1131:692ddf04fc42	1132	*
vcoubard	1131:692ddf04fc42	1133	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1134	* You should use the parallel API from SecurityManager directly. A former
vcoubard	1131:692ddf04fc42	1135	* call to ble.getLinkSecurity(...) should be replaced with
vcoubard	1131:692ddf04fc42	1136	* ble.securityManager().getLinkSecurity(...).
vcoubard	1131:692ddf04fc42	1137	*/
vcoubard	1131:692ddf04fc42	1138	ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
vcoubard	1131:692ddf04fc42	1139	return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
vcoubard	1131:692ddf04fc42	1140	}
vcoubard	1131:692ddf04fc42	1141
vcoubard	1131:692ddf04fc42	1142	/**
vcoubard	1131:692ddf04fc42	1143	* Delete all peer device context and all related bonding information from
vcoubard	1131:692ddf04fc42	1144	* the database within the security manager.
vcoubard	1131:692ddf04fc42	1145	*
vcoubard	1131:692ddf04fc42	1146	* @retval BLE_ERROR_NONE On success; else returns an error code indicating the reason for the failure.
vcoubard	1131:692ddf04fc42	1147	* @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization or
vcoubard	1131:692ddf04fc42	1148	* application registration.
vcoubard	1131:692ddf04fc42	1149	*
vcoubard	1131:692ddf04fc42	1150	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1151	* You should use the parallel API from SecurityManager directly. A former
vcoubard	1131:692ddf04fc42	1152	* call to ble.purgeAllBondingState() should be replaced with
vcoubard	1131:692ddf04fc42	1153	* ble.securityManager().purgeAllBondingState().
vcoubard	1131:692ddf04fc42	1154	*/
vcoubard	1131:692ddf04fc42	1155	ble_error_t purgeAllBondingState(void) {
vcoubard	1131:692ddf04fc42	1156	return securityManager().purgeAllBondingState();
vcoubard	1131:692ddf04fc42	1157	}
vcoubard	1131:692ddf04fc42	1158
vcoubard	1131:692ddf04fc42	1159	/**
vcoubard	1131:692ddf04fc42	1160	* Set up a callback for timeout events. Refer to Gap::TimeoutSource_t for
vcoubard	1131:692ddf04fc42	1161	* possible event types.
vcoubard	1131:692ddf04fc42	1162	*
vcoubard	1131:692ddf04fc42	1163	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1164	* You should use the parallel API from Gap directly. A former call
vcoubard	1131:692ddf04fc42	1165	* to ble.onTimeout(callback) should be replaced with
vcoubard	1131:692ddf04fc42	1166	* ble.gap().onTimeout(callback).
vcoubard	1131:692ddf04fc42	1167	*/
vcoubard	1131:692ddf04fc42	1168	void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
vcoubard	1131:692ddf04fc42	1169	gap().onTimeout(timeoutCallback);
vcoubard	1131:692ddf04fc42	1170	}
vcoubard	1131:692ddf04fc42	1171
vcoubard	1131:692ddf04fc42	1172	/**
vcoubard	1131:692ddf04fc42	1173	* Set up a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
vcoubard	1131:692ddf04fc42	1174	*
vcoubard	1131:692ddf04fc42	1175	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1176	* You should use the parallel API from Gap directly. A former call
vcoubard	1131:692ddf04fc42	1177	* to ble.onConnection(callback) should be replaced with
vcoubard	1131:692ddf04fc42	1178	* ble.gap().onConnection(callback).
vcoubard	1131:692ddf04fc42	1179	*/
vcoubard	1131:692ddf04fc42	1180	void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
vcoubard	1131:692ddf04fc42	1181	gap().onConnection(connectionCallback);
vcoubard	1131:692ddf04fc42	1182	}
vcoubard	1131:692ddf04fc42	1183
vcoubard	1131:692ddf04fc42	1184	/**
vcoubard	1131:692ddf04fc42	1185	* Append to a chain of callbacks to be invoked upon GAP disconnection.
vcoubard	1131:692ddf04fc42	1186	*
vcoubard	1131:692ddf04fc42	1187	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1188	* You should use the parallel API from Gap directly. A former call
vcoubard	1131:692ddf04fc42	1189	* to ble.onDisconnection(callback) should be replaced with
vcoubard	1131:692ddf04fc42	1190	* ble.gap().onDisconnection(callback).
vcoubard	1131:692ddf04fc42	1191	*/
vcoubard	1131:692ddf04fc42	1192	void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
vcoubard	1131:692ddf04fc42	1193	gap().onDisconnection(disconnectionCallback);
vcoubard	1131:692ddf04fc42	1194	}
vcoubard	1131:692ddf04fc42	1195
vcoubard	1131:692ddf04fc42	1196	template<typename T>
vcoubard	1131:692ddf04fc42	1197	void onDisconnection(T tptr, void (T::mptr)(const Gap::DisconnectionCallbackParams_t*)) {
vcoubard	1131:692ddf04fc42	1198	gap().onDisconnection(tptr, mptr);
vcoubard	1131:692ddf04fc42	1199	}
vcoubard	1131:692ddf04fc42	1200
vcoubard	1131:692ddf04fc42	1201	/**
vcoubard	1131:692ddf04fc42	1202	* Radio Notification is a feature that enables ACTIVE and INACTIVE
vcoubard	1131:692ddf04fc42	1203	* (nACTIVE) signals from the stack. These notify the application when the
vcoubard	1131:692ddf04fc42	1204	* radio is in use. The signal is sent using software interrupt.
vcoubard	1131:692ddf04fc42	1205	*
vcoubard	1131:692ddf04fc42	1206	* The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard	1131:692ddf04fc42	1207	* signal is sent at the end of the radio event. These signals can be used
vcoubard	1131:692ddf04fc42	1208	* by the application programmer to synchronize application logic with radio
vcoubard	1131:692ddf04fc42	1209	* activity. For example, the ACTIVE signal can be used to shut off external
vcoubard	1131:692ddf04fc42	1210	* devices to manage peak current drawn during periods when the radio is on,
vcoubard	1131:692ddf04fc42	1211	* or to trigger sensor data collection for transmission in the radio event.
vcoubard	1131:692ddf04fc42	1212	*
vcoubard	1131:692ddf04fc42	1213	* @param callback
vcoubard	1131:692ddf04fc42	1214	* The application handler to be invoked in response to a radio
vcoubard	1131:692ddf04fc42	1215	* ACTIVE/INACTIVE event.
vcoubard	1131:692ddf04fc42	1216	*
vcoubard	1131:692ddf04fc42	1217	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1218	* You should use the parallel API from Gap directly. A former call
vcoubard	1131:692ddf04fc42	1219	* to ble.onRadioNotification(...) should be replaced with
vcoubard	1131:692ddf04fc42	1220	* ble.gap().onRadioNotification(...).
vcoubard	1131:692ddf04fc42	1221	*/
vcoubard	1131:692ddf04fc42	1222	void onRadioNotification(void (*callback)(bool)) {
vcoubard	1131:692ddf04fc42	1223	gap().onRadioNotification(callback);
vcoubard	1131:692ddf04fc42	1224	}
vcoubard	1131:692ddf04fc42	1225
vcoubard	1131:692ddf04fc42	1226	/**
vcoubard	1131:692ddf04fc42	1227	* Add a callback for the GATT event DATA_SENT (which is triggered when
vcoubard	1131:692ddf04fc42	1228	* updates are sent out by GATT in the form of notifications).
vcoubard	1131:692ddf04fc42	1229	*
vcoubard	1131:692ddf04fc42	1230	* @Note: It is possible to chain together multiple onDataSent callbacks
vcoubard	1131:692ddf04fc42	1231	* (potentially from different modules of an application) to receive updates
vcoubard	1131:692ddf04fc42	1232	* to characteristics.
vcoubard	1131:692ddf04fc42	1233	*
vcoubard	1131:692ddf04fc42	1234	* @Note: It is also possible to set up a callback into a member function of
vcoubard	1131:692ddf04fc42	1235	* some object.
vcoubard	1131:692ddf04fc42	1236	*
vcoubard	1131:692ddf04fc42	1237	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1238	* You should use the parallel API from GattServer directly. A former call
vcoubard	1131:692ddf04fc42	1239	* to ble.onDataSent(...) should be replaced with
vcoubard	1131:692ddf04fc42	1240	* ble.gattServer().onDataSent(...).
vcoubard	1131:692ddf04fc42	1241	*/
vcoubard	1131:692ddf04fc42	1242	void onDataSent(void (*callback)(unsigned count)) {
vcoubard	1131:692ddf04fc42	1243	gattServer().onDataSent(callback);
vcoubard	1131:692ddf04fc42	1244	}
vcoubard	1131:692ddf04fc42	1245	template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
vcoubard	1131:692ddf04fc42	1246	gattServer().onDataSent(objPtr, memberPtr);
vcoubard	1131:692ddf04fc42	1247	}
vcoubard	1131:692ddf04fc42	1248
vcoubard	1131:692ddf04fc42	1249	/**
vcoubard	1131:692ddf04fc42	1250	* Set up a callback for when an attribute has its value updated by or at the
vcoubard	1131:692ddf04fc42	1251	* connected peer. For a peripheral, this callback is triggered when the local
vcoubard	1131:692ddf04fc42	1252	* GATT server has an attribute updated by a write command from the peer.
vcoubard	1131:692ddf04fc42	1253	* For a Central, this callback is triggered when a response is received for
vcoubard	1131:692ddf04fc42	1254	* a write request.
vcoubard	1131:692ddf04fc42	1255	*
vcoubard	1131:692ddf04fc42	1256	* @Note: It is possible to chain together multiple onDataWritten callbacks
vcoubard	1131:692ddf04fc42	1257	* (potentially from different modules of an application) to receive updates
vcoubard	1131:692ddf04fc42	1258	* to characteristics. Many services, such as DFU and UART, add their own
vcoubard	1131:692ddf04fc42	1259	* onDataWritten callbacks behind the scenes to trap interesting events.
vcoubard	1131:692ddf04fc42	1260	*
vcoubard	1131:692ddf04fc42	1261	* @Note: It is also possible to set up a callback into a member function of
vcoubard	1131:692ddf04fc42	1262	* some object.
vcoubard	1131:692ddf04fc42	1263	*
vcoubard	1131:692ddf04fc42	1264	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1265	* You should use the parallel API from GattServer directly. A former call
vcoubard	1131:692ddf04fc42	1266	* to ble.onDataWritten(...) should be replaced with
vcoubard	1131:692ddf04fc42	1267	* ble.gattServer().onDataWritten(...).
vcoubard	1131:692ddf04fc42	1268	*/
vcoubard	1131:692ddf04fc42	1269	void onDataWritten(void (callback)(const GattWriteCallbackParams eventDataP)) {
vcoubard	1131:692ddf04fc42	1270	gattServer().onDataWritten(callback);
vcoubard	1131:692ddf04fc42	1271	}
vcoubard	1131:692ddf04fc42	1272	template <typename T> void onDataWritten(T * objPtr, void (T::memberPtr)(const GattWriteCallbackParams context)) {
vcoubard	1131:692ddf04fc42	1273	gattServer().onDataWritten(objPtr, memberPtr);
vcoubard	1131:692ddf04fc42	1274	}
vcoubard	1131:692ddf04fc42	1275
vcoubard	1131:692ddf04fc42	1276	/**
vcoubard	1131:692ddf04fc42	1277	* Set up a callback to be invoked on the peripheral when an attribute is
vcoubard	1131:692ddf04fc42	1278	* being read by a remote client.
vcoubard	1131:692ddf04fc42	1279	*
vcoubard	1131:692ddf04fc42	1280	* @Note: This functionality may not be available on all underlying stacks.
vcoubard	1131:692ddf04fc42	1281	* You could use GattCharacteristic::setReadAuthorizationCallback() as an
vcoubard	1131:692ddf04fc42	1282	* alternative.
vcoubard	1131:692ddf04fc42	1283	*
vcoubard	1131:692ddf04fc42	1284	* @Note: It is possible to chain together multiple onDataRead callbacks
vcoubard	1131:692ddf04fc42	1285	* (potentially from different modules of an application) to receive updates
vcoubard	1131:692ddf04fc42	1286	* to characteristics. Services may add their own onDataRead callbacks
vcoubard	1131:692ddf04fc42	1287	* behind the scenes to trap interesting events.
vcoubard	1131:692ddf04fc42	1288	*
vcoubard	1131:692ddf04fc42	1289	* @Note: It is also possible to set up a callback into a member function of
vcoubard	1131:692ddf04fc42	1290	* some object.
vcoubard	1131:692ddf04fc42	1291	*
vcoubard	1131:692ddf04fc42	1292	* @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
vcoubard	1131:692ddf04fc42	1293	* else BLE_ERROR_NONE.
vcoubard	1131:692ddf04fc42	1294	*
vcoubard	1131:692ddf04fc42	1295	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1296	* You should use the parallel API from GattServer directly. A former call
vcoubard	1131:692ddf04fc42	1297	* to ble.onDataRead(...) should be replaced with
vcoubard	1131:692ddf04fc42	1298	* ble.gattServer().onDataRead(...).
vcoubard	1131:692ddf04fc42	1299	*/
vcoubard	1131:692ddf04fc42	1300	ble_error_t onDataRead(void (callback)(const GattReadCallbackParams eventDataP)) {
vcoubard	1131:692ddf04fc42	1301	return gattServer().onDataRead(callback);
vcoubard	1131:692ddf04fc42	1302	}
vcoubard	1131:692ddf04fc42	1303	template <typename T> ble_error_t onDataRead(T * objPtr, void (T::memberPtr)(const GattReadCallbackParams context)) {
vcoubard	1131:692ddf04fc42	1304	return gattServer().onDataRead(objPtr, memberPtr);
vcoubard	1131:692ddf04fc42	1305	}
vcoubard	1131:692ddf04fc42	1306
vcoubard	1131:692ddf04fc42	1307	/**
vcoubard	1131:692ddf04fc42	1308	* Set up a callback for when notifications or indications are enabled for a
vcoubard	1131:692ddf04fc42	1309	* characteristic on the local GattServer.
vcoubard	1131:692ddf04fc42	1310	*
vcoubard	1131:692ddf04fc42	1311	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1312	* You should use the parallel API from GattServer directly. A former call
vcoubard	1131:692ddf04fc42	1313	* to ble.onUpdatesEnabled(callback) should be replaced with
vcoubard	1131:692ddf04fc42	1314	* ble.gattServer().onUpdatesEnabled(callback).
vcoubard	1131:692ddf04fc42	1315	*/
vcoubard	1131:692ddf04fc42	1316	void onUpdatesEnabled(GattServer::EventCallback_t callback) {
vcoubard	1131:692ddf04fc42	1317	gattServer().onUpdatesEnabled(callback);
vcoubard	1131:692ddf04fc42	1318	}
vcoubard	1131:692ddf04fc42	1319
vcoubard	1131:692ddf04fc42	1320	/**
vcoubard	1131:692ddf04fc42	1321	* Set up a callback for when notifications or indications are disabled for a
vcoubard	1131:692ddf04fc42	1322	* characteristic on the local GattServer.
vcoubard	1131:692ddf04fc42	1323	*
vcoubard	1131:692ddf04fc42	1324	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1325	* You should use the parallel API from GattServer directly. A former call
vcoubard	1131:692ddf04fc42	1326	* to ble.onUpdatesEnabled(callback) should be replaced with
vcoubard	1131:692ddf04fc42	1327	* ble.gattServer().onUpdatesEnabled(callback).
vcoubard	1131:692ddf04fc42	1328	*/
vcoubard	1131:692ddf04fc42	1329	void onUpdatesDisabled(GattServer::EventCallback_t callback) {
vcoubard	1131:692ddf04fc42	1330	gattServer().onUpdatesDisabled(callback);
vcoubard	1131:692ddf04fc42	1331	}
vcoubard	1131:692ddf04fc42	1332
vcoubard	1131:692ddf04fc42	1333	/**
vcoubard	1131:692ddf04fc42	1334	* Set up a callback for when the GATT server receives a response for an
vcoubard	1131:692ddf04fc42	1335	* indication event sent previously.
vcoubard	1131:692ddf04fc42	1336	*
vcoubard	1131:692ddf04fc42	1337	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1338	* You should use the parallel API from GattServer directly. A former call
vcoubard	1131:692ddf04fc42	1339	* to ble.onConfirmationReceived(callback) should be replaced with
vcoubard	1131:692ddf04fc42	1340	* ble.gattServer().onConfirmationReceived(callback).
vcoubard	1131:692ddf04fc42	1341	*/
vcoubard	1131:692ddf04fc42	1342	void onConfirmationReceived(GattServer::EventCallback_t callback) {
vcoubard	1131:692ddf04fc42	1343	gattServer().onConfirmationReceived(callback);
vcoubard	1131:692ddf04fc42	1344	}
vcoubard	1131:692ddf04fc42	1345
vcoubard	1131:692ddf04fc42	1346	/**
vcoubard	1131:692ddf04fc42	1347	* Set up a callback for when the security setup procedure (key generation
vcoubard	1131:692ddf04fc42	1348	* and exchange) for a link has started. This will be skipped for bonded
vcoubard	1131:692ddf04fc42	1349	* devices. The callback is passed in parameters received from the peer's
vcoubard	1131:692ddf04fc42	1350	* security request: bool allowBonding, bool requireMITM, and
vcoubard	1131:692ddf04fc42	1351	* SecurityIOCapabilities_t.
vcoubard	1131:692ddf04fc42	1352	*
vcoubard	1131:692ddf04fc42	1353	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1354	* You should use the parallel API from SecurityManager directly. A former
vcoubard	1131:692ddf04fc42	1355	* call to ble.onSecuritySetupInitiated(callback) should be replaced with
vcoubard	1131:692ddf04fc42	1356	* ble.securityManager().onSecuritySetupInitiated(callback).
vcoubard	1131:692ddf04fc42	1357	*/
vcoubard	1131:692ddf04fc42	1358	void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
vcoubard	1131:692ddf04fc42	1359	securityManager().onSecuritySetupInitiated(callback);
vcoubard	1131:692ddf04fc42	1360	}
vcoubard	1131:692ddf04fc42	1361
vcoubard	1131:692ddf04fc42	1362	/**
vcoubard	1131:692ddf04fc42	1363	* Set up a callback for when the security setup procedure (key generation
vcoubard	1131:692ddf04fc42	1364	* and exchange) for a link has completed. This will be skipped for bonded
vcoubard	1131:692ddf04fc42	1365	* devices. The callback is passed in the success/failure status of the
vcoubard	1131:692ddf04fc42	1366	* security setup procedure.
vcoubard	1131:692ddf04fc42	1367	*
vcoubard	1131:692ddf04fc42	1368	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1369	* You should use the parallel API from SecurityManager directly. A former
vcoubard	1131:692ddf04fc42	1370	* call to ble.onSecuritySetupCompleted(callback) should be replaced with
vcoubard	1131:692ddf04fc42	1371	* ble.securityManager().onSecuritySetupCompleted(callback).
vcoubard	1131:692ddf04fc42	1372	*/
vcoubard	1131:692ddf04fc42	1373	void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
vcoubard	1131:692ddf04fc42	1374	securityManager().onSecuritySetupCompleted(callback);
vcoubard	1131:692ddf04fc42	1375	}
vcoubard	1131:692ddf04fc42	1376
vcoubard	1131:692ddf04fc42	1377	/**
vcoubard	1131:692ddf04fc42	1378	* Set up a callback for when a link with the peer is secured. For bonded
vcoubard	1131:692ddf04fc42	1379	* devices, subsequent reconnections with a bonded peer will result only in
vcoubard	1131:692ddf04fc42	1380	* this callback when the link is secured, and setup procedures will not
vcoubard	1131:692ddf04fc42	1381	* occur unless the bonding information is either lost or deleted on either
vcoubard	1131:692ddf04fc42	1382	* or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
vcoubard	1131:692ddf04fc42	1383	* to the level of security in effect for the secured link.
vcoubard	1131:692ddf04fc42	1384	*
vcoubard	1131:692ddf04fc42	1385	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1386	* You should use the parallel API from SecurityManager directly. A former
vcoubard	1131:692ddf04fc42	1387	* call to ble.onLinkSecured(callback) should be replaced with
vcoubard	1131:692ddf04fc42	1388	* ble.securityManager().onLinkSecured(callback).
vcoubard	1131:692ddf04fc42	1389	*/
vcoubard	1131:692ddf04fc42	1390	void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
vcoubard	1131:692ddf04fc42	1391	securityManager().onLinkSecured(callback);
vcoubard	1131:692ddf04fc42	1392	}
vcoubard	1131:692ddf04fc42	1393
vcoubard	1131:692ddf04fc42	1394	/**
vcoubard	1131:692ddf04fc42	1395	* Set up a callback for successful bonding, meaning that link-specific security
vcoubard	1131:692ddf04fc42	1396	* context is stored persistently for a peer device.
vcoubard	1131:692ddf04fc42	1397	*
vcoubard	1131:692ddf04fc42	1398	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1399	* You should use the parallel API from SecurityManager directly. A former
vcoubard	1131:692ddf04fc42	1400	* call to ble.onSecurityContextStored(callback) should be replaced with
vcoubard	1131:692ddf04fc42	1401	* ble.securityManager().onSecurityContextStored(callback).
vcoubard	1131:692ddf04fc42	1402	*/
vcoubard	1131:692ddf04fc42	1403	void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
vcoubard	1131:692ddf04fc42	1404	securityManager().onSecurityContextStored(callback);
vcoubard	1131:692ddf04fc42	1405	}
vcoubard	1131:692ddf04fc42	1406
vcoubard	1131:692ddf04fc42	1407	/**
vcoubard	1131:692ddf04fc42	1408	* Set up a callback for when the passkey needs to be displayed on a
vcoubard	1131:692ddf04fc42	1409	* peripheral with DISPLAY capability. This happens when security is
vcoubard	1135:22aada733dbd	1410	* configured to prevent Man-In-The-Middle attacks, and the peers need to exchange
vcoubard	1131:692ddf04fc42	1411	* a passkey (or PIN) to authenticate the connection
vcoubard	1131:692ddf04fc42	1412	* attempt.
vcoubard	1131:692ddf04fc42	1413	*
vcoubard	1131:692ddf04fc42	1414	* @note: This API is now deprecated and will be dropped in the future.
vcoubard	1131:692ddf04fc42	1415	* You should use the parallel API from SecurityManager directly. A former
vcoubard	1131:692ddf04fc42	1416	* call to ble.onPasskeyDisplay(callback) should be replaced with
vcoubard	1131:692ddf04fc42	1417	* ble.securityManager().onPasskeyDisplay(callback).
vcoubard	1131:692ddf04fc42	1418	*/
vcoubard	1131:692ddf04fc42	1419	void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
vcoubard	1131:692ddf04fc42	1420	return securityManager().onPasskeyDisplay(callback);
vcoubard	1131:692ddf04fc42	1421	}
vcoubard	1131:692ddf04fc42	1422
vcoubard	1131:692ddf04fc42	1423	private:
vcoubard	1131:692ddf04fc42	1424	/**
vcoubard	1131:692ddf04fc42	1425	* Implementation of init() [internal to BLE_API].
vcoubard	1131:692ddf04fc42	1426	*
vcoubard	1131:692ddf04fc42	1427	* The implementation is separated into a private method because it isn't
vcoubard	1131:692ddf04fc42	1428	* suitable to be included in the header.
vcoubard	1131:692ddf04fc42	1429	*/
vcoubard	1131:692ddf04fc42	1430	ble_error_t initImplementation(FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback);
vcoubard	1131:692ddf04fc42	1431
vcoubard	1131:692ddf04fc42	1432	private:
vcoubard	1131:692ddf04fc42	1433	BLE(const BLE&);
vcoubard	1131:692ddf04fc42	1434	BLE &operator=(const BLE &);
vcoubard	1131:692ddf04fc42	1435
vcoubard	1131:692ddf04fc42	1436	private:
vcoubard	1131:692ddf04fc42	1437	InstanceID_t instanceID;
vcoubard	1131:692ddf04fc42	1438	BLEInstanceBase transport; / The device-specific backend */
vcoubard	1131:692ddf04fc42	1439	};
vcoubard	1131:692ddf04fc42	1440
vcoubard	1131:692ddf04fc42	1441	typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
vcoubard	1131:692ddf04fc42	1442	* code. Will be dropped at some point soon.*/
vcoubard	1131:692ddf04fc42	1443
rgrover1	716:11b41f651697	1444	#endif // ifndef __BLE_H__

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	09 Jan 2014
Imports:	8130
Forks:	41
Commits:	1209
Dependents:	694
Dependencies:	0
Followers:	699
Issues:	0

The code in this repository is Apache licensed.