Mbed OS Reference | AT_CellularDevice.h Source File

 /*
  * Copyright (c) 2017, Arm Limited and affiliates.
  * SPDX-License-Identifier: Apache-2.0
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 
 #ifndef AT_CELLULAR_DEVICE_H_
 #define AT_CELLULAR_DEVICE_H_
 
 #include "CellularDevice.h"
 #include "ATHandler.h"
 
 namespace mbed {
 
 class AT_CellularInformation;
 class AT_CellularNetwork;
 class AT_CellularSMS;
 class AT_CellularContext;
 class FileHandle;
 
 /**
  *  Class AT_CellularDevice
  *
  *  A class defines opening and closing of cellular interfaces.
  *  Deleting/Closing of opened interfaces can be done only through this class.
  */
 class AT_CellularDevice : public CellularDevice {
 public:
     /* Supported features by the modem
      *
      * NOTE! These are used as index to feature table, so the only allowed modification to this is appending
      *       to the end (just before PROPERTY_MAX). Do not modify any of the existing fields.
      */
     enum CellularProperty {
         PROPERTY_C_EREG,                // AT_CellularNetwork::RegistrationMode. What support modem has for this registration type.
         PROPERTY_C_GREG,                // AT_CellularNetwork::RegistrationMode. What support modem has for this registration type.
         PROPERTY_C_REG,                 // AT_CellularNetwork::RegistrationMode. What support modem has for this registration type.
         PROPERTY_AT_CGSN_WITH_TYPE,     // 0 = not supported, 1 = supported. AT+CGSN without type is likely always supported similar to AT+GSN.
         PROPERTY_AT_CGDATA,             // 0 = not supported, 1 = supported. Alternative is to support only ATD*99***<cid>#
         PROPERTY_AT_CGAUTH,             // 0 = not supported, 1 = supported. APN authentication AT commands supported
         PROPERTY_AT_CNMI,               // 0 = not supported, 1 = supported. New message (SMS) indication AT command
         PROPERTY_AT_CSMP,               // 0 = not supported, 1 = supported. Set text mode AT command
         PROPERTY_AT_CMGF,               // 0 = not supported, 1 = supported. Set preferred message format AT command
         PROPERTY_AT_CSDH,               // 0 = not supported, 1 = supported. Show text mode AT command
         PROPERTY_IPV4_PDP_TYPE,         // 0 = not supported, 1 = supported. Does modem support IPV4?
         PROPERTY_IPV6_PDP_TYPE,         // 0 = not supported, 1 = supported. Does modem support IPV6?
         PROPERTY_IPV4V6_PDP_TYPE,       // 0 = not supported, 1 = supported. Does modem support IPV4 and IPV6 simultaneously?
         PROPERTY_NON_IP_PDP_TYPE,       // 0 = not supported, 1 = supported. Does modem support Non-IP?
         PROPERTY_AT_CGEREP,             // 0 = not supported, 1 = supported. Does modem support AT command AT+CGEREP.
         PROPERTY_AT_COPS_FALLBACK_AUTO, // 0 = not supported, 1 = supported. Does modem support mode 4 of AT+COPS= ?
         PROPERTY_SOCKET_COUNT,          // The number of sockets of modem IP stack
         PROPERTY_IP_TCP,                // 0 = not supported, 1 = supported. Modem IP stack has support for TCP
         PROPERTY_IP_UDP,                // 0 = not supported, 1 = supported. Modem IP stack has support for TCP
         PROPERTY_AT_SEND_DELAY,         // Sending delay between AT commands in ms
         PROPERTY_MAX
     };
 
 public:
     AT_CellularDevice(FileHandle *fh);
     virtual ~AT_CellularDevice();
 
     virtual nsapi_error_t clear();
 
     virtual nsapi_error_t hard_power_on();
 
     virtual nsapi_error_t hard_power_off();
 
     virtual nsapi_error_t soft_power_on();
 
     virtual nsapi_error_t soft_power_off();
 
     virtual nsapi_error_t set_pin(const char *sim_pin);
 
     virtual nsapi_error_t get_sim_state(SimState &state);
 
     virtual CellularContext *create_context(const char *apn = NULL, bool cp_req = false, bool nonip_req = false);
 
     virtual void delete_context(CellularContext *context);
 
     virtual CellularNetwork *open_network();
 
     virtual CellularInformation *open_information();
 
     virtual void close_network();
 
     virtual void close_information();
 
     virtual void set_timeout(int timeout);
 
     virtual void modem_debug_on(bool on);
 
     virtual nsapi_error_t init();
 
     virtual nsapi_error_t shutdown();
 
     virtual nsapi_error_t is_ready();
 
     virtual void set_ready_cb(Callback<void()> callback);
 
     virtual nsapi_error_t set_power_save_mode(int periodic_time, int active_time = 0);
 
     virtual ATHandler *get_at_handler();
 
     virtual CellularContext *get_context_list() const;
 
     virtual nsapi_error_t set_baud_rate(int baud_rate);
 
 #if MBED_CONF_CELLULAR_USE_SMS
     virtual CellularSMS *open_sms();
 
     virtual void close_sms();
 #endif
 
     /** Get value for the given key.
      *
      *  @param key  key for value to be fetched
      *  @return     property value for the given key. Value type is defined in enum CellularProperty
      */
     intptr_t get_property(CellularProperty key);
 
     /** Cellular module need to define an array of cellular properties which defines module supported property values.
      *
      *  @param property_array array of module properties
      */
     void set_cellular_properties(const intptr_t *property_array);
 
 protected:
     /** Creates new instance of AT_CellularContext or if overridden, modem specific implementation.
      *
      *  @param at           ATHandler reference for communication with the modem.
      *  @param apn          access point to use with context
      *  @param cp_req       flag indicating if control plane EPS optimization needs to be setup
      *  @param nonip_req    flag indicating if PDP context needs to be Non-IP
      *  @return             new instance of class AT_CellularContext
      *
      */
     virtual AT_CellularContext *create_context_impl(ATHandler &at, const char *apn, bool cp_req = false, bool nonip_req = false);
 
     /** Create new instance of AT_CellularNetwork or if overridden, modem specific implementation.
      *
      *  @param at   ATHandler reference for communication with the modem.
      *  @return new instance of class AT_CellularNetwork
      */
     virtual AT_CellularNetwork *open_network_impl(ATHandler &at);
 
     /** Create new instance of AT_CellularInformation or if overridden, modem specific implementation.
      *
      *  @param at   ATHandler reference for communication with the modem.
      *  @return new instance of class AT_CellularInformation
      */
     virtual AT_CellularInformation *open_information_impl(ATHandler &at);
 
 #if MBED_CONF_CELLULAR_USE_SMS
     /** Create new instance of AT_CellularSMS or if overridden, modem specific implementation.
      *
      *  @param at   ATHandler reference for communication with the modem.
      *  @return new instance of class AT_CellularSMS
      */
     virtual AT_CellularSMS *open_sms_impl(ATHandler &at);
 #endif // MBED_CONF_CELLULAR_USE_SMS
 
     virtual void cellular_callback(nsapi_event_t ev, intptr_t ptr, CellularContext *ctx = NULL);
     void send_disconnect_to_context(int cid);
     // Sets commonly used URCs
     void set_at_urcs();
     // To be used for setting target specific URCs
     virtual void set_at_urcs_impl();
     // Sets up parameters for AT handler, for now only the send delay and URCs.
     // This kind of routine is needed for initialisation routines that are virtual and therefore cannot be called from constructor.
     void setup_at_handler();
     virtual nsapi_error_t set_baud_rate_impl(int baud_rate);
 
 private:
     void urc_nw_deact();
     void urc_pdn_deact();
 
 protected:
     ATHandler _at;
 
 private:
 #if MBED_CONF_CELLULAR_USE_SMS
     AT_CellularSMS *_sms;
 #endif // MBED_CONF_CELLULAR_USE_SMS
 
     AT_CellularNetwork *_network;
     AT_CellularInformation *_information;
     AT_CellularContext *_context_list;
 
     std::chrono::duration<int, std::milli> _default_timeout;
     bool _modem_debug_on;
     const intptr_t *_property_array;
 };
 
 } // namespace mbed
 #endif // AT_CELLULAR_DEVICE_H_
Important Information for this Arm website
