![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
NRF51822 as bluetooth to UART
Dependencies: BLE_API BLE_LoopbackUART mbed nRF51822
Fork of BLE_LoopbackUART by
main.cpp
- Committer:
- Rohit Grover
- Date:
- 2014-06-13
- Revision:
- 2:e060367b9024
- Parent:
- 0:e910d9bb040f
- Child:
- 5:4bc41267a03a
File content as of revision 2:e060367b9024:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "mbed.h" #include "BLEDevice.h" #define BLE_UUID_NUS_SERVICE 0x0001 /**< The UUID of the Nordic UART Service. */ #define BLE_UUID_NUS_TX_CHARACTERISTIC 0x0002 /**< The UUID of the TX Characteristic. */ #define BLE_UUID_NUS_RX_CHARACTERISTIC 0x0003 /**< The UUID of the RX Characteristic. */ #define NEED_CONSOLE_OUTPUT 0 /* Set this if you need debug messages on the console; * it will have an impact on code-size and power consumption. */ #if NEED_CONSOLE_OUTPUT Serial pc(USBTX, USBRX); #define DEBUG(...) { pc.printf(__VA_ARGS__); } #else #define DEBUG(...) /* nothing */ #endif /* #if NEED_CONSOLE_OUTPUT */ BLEDevice ble; DigitalOut led1(LED1); // The Nordic UART Service static const uint8_t uart_base_uuid[] = {0x6e, 0x40, 0x00, 0x01, 0xb5, 0xa3, 0xf3, 0x93, 0xe0, 0xa9, 0xe5,0x0e, 0x24, 0xdc, 0xca, 0x9e}; static const uint8_t uart_tx_uuid[] = {0x6e, 0x40, 0x00, 0x02, 0xb5, 0xa3, 0xf3, 0x93, 0xe0, 0xa9, 0xe5,0x0e, 0x24, 0xdc, 0xca, 0x9e}; static const uint8_t uart_rx_uuid[] = {0x6e, 0x40, 0x00, 0x03, 0xb5, 0xa3, 0xf3, 0x93, 0xe0, 0xa9, 0xe5,0x0e, 0x24, 0xdc, 0xca, 0x9e}; static const uint8_t uart_base_uuid_rev[] = {0x9e, 0xca, 0xdc, 0x24, 0x0e, 0xe5, 0xa9, 0xe0, 0x93, 0xf3, 0xa3, 0xb5, 0x01, 0x00, 0x40, 0x6e}; uint8_t txPayload[8] = {0,}; uint8_t rxPayload[8] = {0,}; GattCharacteristic txCharacteristic (uart_tx_uuid, txPayload, 1, 8, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE_WITHOUT_RESPONSE); GattCharacteristic rxCharacteristic (uart_rx_uuid, rxPayload, 1, 8, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY); GattCharacteristic *uartChars[] = {&txCharacteristic, &rxCharacteristic}; GattService uartService(uart_base_uuid, uartChars, sizeof(uartChars) / sizeof(GattCharacteristic *)); void disconnectionCallback(void) { DEBUG("Disconnected!\n\r"); DEBUG("Restarting the advertising process\n\r"); ble.startAdvertising(); } void onDataWritten(uint16_t charHandle) { if (charHandle == txCharacteristic.getHandle()) { DEBUG("onDataWritten()\n\r"); uint16_t bytesRead; ble.readCharacteristicValue(txCharacteristic.getHandle(), txPayload, &bytesRead); DEBUG("ECHO: %s\n\r", (char *)txPayload); ble.updateCharacteristicValue(rxCharacteristic.getHandle(), txPayload, bytesRead); } } void periodicCallback(void) { led1 = !led1; /* Do blinky on LED1 while we're waiting for BLE events */ } int main(void) { led1 = 1; Ticker ticker; ticker.attach(periodicCallback, 1); DEBUG("Initialising the nRF51822\n\r"); ble.init(); ble.onDisconnection(disconnectionCallback); ble.onDataWritten(onDataWritten); /* setup advertising */ ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED); ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED); ble.accumulateAdvertisingPayload(GapAdvertisingData::SHORTENED_LOCAL_NAME, (const uint8_t *)"BLE UART", sizeof("BLE UART") - 1); ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_128BIT_SERVICE_IDS, (const uint8_t *)uart_base_uuid_rev, sizeof(uart_base_uuid)); ble.setAdvertisingInterval(160); /* 100ms; in multiples of 0.625ms. */ ble.startAdvertising(); ble.addService(uartService); while (true) { ble.waitForEvent(); } }