Diff: main.cpp

Revision:

0:eadd1c588343

Child:

1:e62251d890c1

diff -r 000000000000 -r eadd1c588343 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sun Aug 31 15:10:45 2014 +0000
@@ -0,0 +1,225 @@
+/*
+    CC3000 OSC message tranceiver(Sender/Receiver)
+
+    Sparkfun CC3000 WiFi Shield meets mbed!
+       
+    This program supports the following mbed boards with Sparkfun CC3000 Sheild.
+    '#define' switches board.(refer to source code)
+    (1)FRDM-KL25Z (K25Z)
+    (2)ST Nucleo F401RE (STM32F401)
+    (3)ST Nucleo F030R8 (STM32F030)
+    (4)LPCXpresso1549 (LPC1549)
+    (5)Seeduino-Arch-Pro (ARCH_PRO)
+
+ Please push RESET button on CC3000 WiFi Shield to start the program.
+
+  reference:  
+    https://www.sparkfun.com/products/12071 for CC300 Shield
+    http://opensoundcontrol.org/introduction-osc for OSC(Open Sound Control)
+
+  date: 2014/8/31
+  written by: xshige
+
+console out sample:
+==========================================
+CC3000 OSC receive&send demo.
+IP address: 192.168.0.3
+This OSC msg sent:
+/1/fader1 ,f 0.000000
+to: 192.168.0.11
+-------------------
+This OSC msg sent:
+/1/fader5 ,f 0.172000
+to: 192.168.0.11
+-------------------
+
+Wait for OSC message...
+
+This OSC msg sent:
+/1/fader5 ,f 0.127000
+to: 192.168.0.11
+-------------------
+
+Wait for OSC message...
+
+incomming OSC msg:
+/1/fader2 ,f 0.761603
+Received packet from: 192.168.0.2
+-------------------
+This OSC msg sent:
+/1/fader5 ,f 0.711000
+to: 192.168.0.2
+-------------------
+
+Wait for OSC message...
+
+incomming OSC msg:
+/1/fader2 ,f 0.767932
+Received packet from: 192.168.0.2
+-------------------
+This OSC msg sent:
+/1/fader5 ,f 0.286000
+to: 192.168.0.2
+-------------------
+
+Wait for OSC message...
+
+==========================================
+*/
+
+#include "mbed.h"
+#include "cc3000.h"
+
+#include "UDPSocket.h"
+
+// define board you like (KL25Z, LPC1549, STM32F401, STM32F030 ...)
+//#define KL25Z
+#define STM32F401
+//#define STM32F030
+//#define LPC1549
+//#define ARCH_PRO
+
+// define SSID, PASSWORD you like
+#define SSID "sssid"
+#define PASSWORD "password"
+
+using namespace mbed_cc3000;
+
+/* cc3000 module declaration specific for user's board. */
+#if defined(KL25Z)
+// for KL25Z
+cc3000 wifi(PTD4, PTC9, PTD0, SPI(PTD2, PTD3, PTD1), SSID, PASSWORD, WPA2, false);
+Serial pc(USBTX, USBRX);
+#endif
+#if defined(STM32F401)
+// for Nucleo STM32F401
+cc3000 wifi(PA_10, PA_8, PB_6, SPI(PA_7, PA_6, PA_5), SSID, PASSWORD, WPA2, false);
+// for Nucleo STM32F401
+Serial pc(SERIAL_TX, SERIAL_RX);
+#endif
+#if defined(STM32F030)
+// for Nucleo STM32F030
+cc3000 wifi(PA_10, PA_8, PB_6, SPI(PA_7, PA_6, PA_5), SSID, PASSWORD, WPA2, false);
+// for Nucleo STM32F030
+Serial pc(SERIAL_TX, SERIAL_RX);
+#endif
+#if defined(LPC1549)
+// for LPC1549
+cc3000 wifi(P0_29, P0_0, P0_27, SPI(P0_28, P0_12, P0_16), SSID, PASSWORD, WPA2, false);
+Serial pc(USBTX, USBRX);
+#endif
+#if defined(ARCH_PRO)
+// for Seeed Studio Arch Pro
+cc3000 wifi(P0_4, P2_5, P0_6, SPI(P0_9, P0_8, P0_7), SSID, PASSWORD, WPA2, false);
+Serial pc(USBTX, USBRX);
+#endif
+
+// OSC related
+#include "OSCmsgCodec.h"
+
+// set yout IP, PORTs
+#define REMOTE_IP "192.168.0.11" // (will be replaced after OSC msg received)
+#define OUTGOING_PORT 9000
+#define INCOMMING_PORT 8000
+    
+#define PACKET_SIZE 512
+#define RECBUF_SIZE 256
+#define PERIOD_BUZZER 10
+
+union OSCarg msg[10], outmsg[10];
+char recbuf[RECBUF_SIZE],buff[PACKET_SIZE],packet[PACKET_SIZE];
+int len, tn;
+
+char sendto_ip[16];
+
+int main() {    
+    // set initial IP to send
+    strcpy(sendto_ip, REMOTE_IP);
+
+    pc.baud(115200);
+
+    printf("\n\nCC3000 OSC receive&send demo. \n");
+    wifi.init();
+    if (wifi.connect() == -1) {
+        printf("Failed to connect. Please verify connection details and try again. \n");
+    } else {
+        printf("IP address: %s \n", wifi.getIPAddress());
+    }
+    
+    UDPSocket udpRec,udpSend;
+    udpSend.init(); udpRec.bind(INCOMMING_PORT);
+
+    Endpoint target, client;
+    target.set_address(REMOTE_IP, OUTGOING_PORT);
+        
+    // send OSC message with random values (to touchOSC)
+    // make OSC message for sending
+    outmsg[0].address="/1/fader1";    
+    outmsg[1].typeTag=",f";
+    outmsg[2].f= 0.0;
+    memset(packet,0,sizeof(packet)); // clear send buff for OSC msg
+    len=encOSCmsg(packet,outmsg);
+    // send it
+    target.set_address(sendto_ip, OUTGOING_PORT);    
+    udpSend.sendTo(target, packet, len);
+    pc.printf("This OSC msg sent:\n%s %s %f\n", outmsg[0].address, outmsg[1].typeTag, outmsg[2].f);
+    pc.printf("to: %s\n", sendto_ip);
+    pc.printf("-------------------\n");
+    wait_ms(10);
+ 
+    while (true) {
+#if 0
+        // xy 
+        // send OSC message with random values  (to touchOSC)
+        // make OSC message for sending
+        outmsg[0].address="/3/xy";    
+        outmsg[1].typeTag=",ff";
+        outmsg[2].f = rand()%1000/1000.0;
+        outmsg[3].f = rand()%1000/1000.0;
+        memset(packet,0,sizeof(packet)); // clear send buff for OSC msg
+        len=encOSCmsg(packet,outmsg);
+        target.set_address(sendto_ip, OUTGOING_PORT);    
+        udpSend.sendTo(target, packet, len);        
+//pc.printf("len:%d\n",len);
+        pc.printf("This OSC msg sent:\n%s %s %f %f\n", outmsg[0].address, outmsg[1].typeTag, outmsg[2].f, outmsg[3].f);
+        pc.printf("to: %s\n", sendto_ip);
+        pc.printf("-------------------\n");
+        wait_ms(10);
+#else
+        // fader
+        // send OSC message with random values (to touchOSC)
+        // make OSC message for sending
+        outmsg[0].address="/1/fader5";    
+        outmsg[1].typeTag=",f";
+        outmsg[2].f= rand()%1000/1000.0;
+        memset(packet,0,sizeof(packet)); // clear send buff for OSC msg
+        len=encOSCmsg(packet,outmsg);
+        // send it
+        target.set_address(sendto_ip, OUTGOING_PORT);    
+        udpSend.sendTo(target, packet, len);
+//pc.printf("len:%d\n",len);
+        pc.printf("This OSC msg sent:\n%s %s %f\n", outmsg[0].address, outmsg[1].typeTag, outmsg[2].f);
+        pc.printf("to: %s\n", sendto_ip);
+        pc.printf("-------------------\n");
+        wait_ms(10);
+#endif
+
+        // receive OSC message        
+        printf("\nWait for OSC message...\n\n");
+        int n = udpRec.receiveFrom(client, recbuf, sizeof(recbuf));
+        if (n >= 0) {
+            decOSCmsg(recbuf, msg);
+            pc.printf("incomming OSC msg:\n%s %s", msg[0].address, msg[1].typeTag);
+            for(int m=0; m < (strlen(msg[1].typeTag)-1); m++) {
+                if (msg[1].typeTag[m+1]=='f') pc.printf(" %f",msg[m+2].f);
+                if (msg[1].typeTag[m+1]=='i') pc.printf(" %d",msg[m+2].i);                
+            }
+            pc.printf("\n");
+            printf("Received packet from: %s \n", client.get_address());
+            printf("-------------------\n");
+            // change IP to send
+            strcpy(sendto_ip, client.get_address());
+            wait_ms(10);
+        };
+    } // while (true)
+}