File content as of revision 0:35e1c447c9e8:

#include "mbed.h"
#include "mbed.h"
#include "SWSPI.h"
#include "SWSPI_BI.h"
#include "S25FL216K.h"
#include "AD5384.h"
#include "AD9249.h"
#include "S_SCTRL_SM1_PinDef.h" 
#include "S_SCTRL_SM1_hwfunct.h" 

#define VERSION 1
#define SUBVERSION 3
#define DEBUGPF(x) printf((x));
// pin function         pin id 
// SPI 1 


S25FL216K flash(F_MOSI, F_MISO, F_SCLK,F_CS); 
Serial pc(USBTX,USBRX);


char c='.';
void callback() {
    // Note: you need to actually read from the serial to clear the RX interrupt  
    c = pc.getc();
    printf("%c:",c );    
 }


//++++++++++++++++++++++
  int main()   {   
        
       pc.attach(&callback);// handles the input on the RS232 interface  
    HWlines  hwl ;
    assignports( &hwl );
    setdefault(hwl );
    
    SWSPI spi(hwl.mosi[0],hwl.miso[0],hwl.sclk[0]); // mosi, miso, sclk
    SWSPI spi2(hwl.mosi[1],hwl.miso[1],hwl.sclk[1]); // mosi, miso, sclk
    SWSPI_BI spi_adc(hwl.msio[0],hwl.direction[0],hwl.stio_mo[0] ,hwl.sclk[0]); // msio, dir , sclk 
    SWSPI_BI spi_adc2(hwl.msio[1],hwl.direction[1],hwl.stio_mo[1],hwl.sclk[1]); // msio, dir , sclk 
  
    
      AD9249 adc[2][2]={AD9249( &spi_adc,hwl.csb1[0]), AD9249( &spi_adc,hwl.csb2[0]),
                        AD9249( &spi_adc2,hwl.csb1[1]),  AD9249  ( &spi_adc2,hwl.csb2[1])};
     
      AD5384 dac[2]={AD5384(&spi,hwl.dac_cs[0]), AD5384(&spi2,hwl.dac_cs[1]) };
      
      //float humi;
      
      
      
      DEBUGPF("start");
      printf(" version  %d.%02d  compiled %s %s \n\r" , VERSION , SUBVERSION, __DATE__, __TIME__ );
      printf(" boardserialnr %d \n\r", get_serialnr(&hwl));
      u8 consel1=0;
      u8 consel2=1;
      u8 conls=0, conle=0;  // connector select loop start , connector select loop stop
      // cc == connector counter
            if( consel1==1 && consel2== 0) { conls=0; conle=1;} // only first connector connected 
      else  if( consel1==0 && consel2== 1) { conls=1; conle=2;} // only second  connector connected 
      else  if( consel1==1 && consel2== 1) { conls=0; conle=2;} // 
      else                                 { conls=0; conle=0;} // no connectors connected 
      unsigned char id, grade ;
      
      
     /* for (u8 cc= conls; cc < conle ; cc++) {
        adc[cc][0].getDevInfo(id,grade);printf(" %d %d ",id, grade);
        adc[cc][1].getDevInfo(id,grade);printf(" %d %d ",id, grade);
        
      }*/
      u32 count =0;
      while(1)   {
        for (u8 cc= conls; cc < conle ; cc++) {
        u16 rb,rb2;      
        adc[cc][0].getDevId(id);
        adc[cc][0].getGrade(grade);
        //adc[cc][0].getDevInfo(id,grade,rb);
        printf("id %02X grade %02X",id, grade );
        printf("\n\r");
        adc[cc][0].setPattern1(0x1235);
        adc[cc][0].setPattern2(0xA5FF);
        adc[cc][0].readPattern1(rb);       
        adc[cc][0].readPattern2(rb2);
        printf("pattern1 %04X  pattern2 %04X",rb,rb2);
        printf("\n\r");
       // dac[cc].set_volt(count%32,count%163834);
       }
        wait(.5);count++;
        
        /*
        DEBUGPF("spi2\n\r");
        spi.format(8, 0);
        spi.frequency(10000000);
        cs.write(0);
        spi.write(0x9f);
        jedecid = (spi.write(0) << 16) | (spi.write(0) << 8) | spi.write(0);
        cs.write(1);      
        printf( "Jedec %d /n/r", jedecid);
        
        DEBUGPF("spi3\n\r");      
        spi_adc.format(8,0);
        spi_adc.frequency(10000000);
        cs_adc.write(0);
        spi_adc.write(0x9f);
        jedecid = (spi_adc.write(0) << 16) | (spi_adc.write(0) << 8) | spi_adc.write(0);
        cs_adc.write(1);
        char c=0x12;
        flash.write(0,&c,1);
        DEBUGPF("dacset");
        (void) dac.set_dac(4,2.21);  
        humi=ain1.read();
        printf("humid %f \n ",humi);   
        */
      }
  }