Ward Mattar
This is code is part of a Technion course project in advanced IoT, implementing a device to receive and present sensors data from a Formula racing car built by students at Technion - Israel Institute of Technology.
Fork of
DISCO-L072CZ-LRWAN1_LoRa_PingPong
by 
ST
This is code is part of a Technion course project in advanced IoT, implementing a device to receive sensors data from another L072CZ-LRWAN1 installed on a Formula racing car (built by students at Technion - Israel Institute of Technology), and sends it to a GUI presenting the data (GUI project: github.com/ward-mattar/TechnionFormulaGUI).
How to install
- Create an account on Mbed: https://os.mbed.com/account/signup/
- Import project into Compiler
- In the Program Workspace select "Formula_Nucleo_Receiver"
- Select a Platform like so:
- Click button at top-left
- Add Board
- Search "NUCLEO F103RB" and then "Add to your Mbed Compiler"
- Finally click "Compile", if the build was successful, the binary would download automatically
- To install it on device simply plug it in to a PC, open device drive and drag then drop binary file in it
SX1276GenericLib/registers/sx1276Regs-LoRa.h
- Committer:
- wardm
- Date:
- 2018-05-19
- Revision:
- 12:046346a16ff4
File content as of revision 12:046346a16ff4:
/*
/ _____) _ | |
( (____ _____ ____ _| |_ _____ ____| |__
\____ \| ___ | (_ _) ___ |/ ___) _ \
_____) ) ____| | | || |_| ____( (___| | | |
(______/|_____)_|_|_| \__)_____)\____)_| |_|
(C) 2014 Semtech
Description: SX1276 LoRa modem registers and bits definitions
License: Revised BSD License, see LICENSE.TXT file include in the project
Maintainer: Miguel Luis and Gregory Cristian
*/
#ifndef __SX1276_REGS_LORA_H__
#define __SX1276_REGS_LORA_H__
/*!
* ============================================================================
* SX1276 Internal registers Address
* ============================================================================
*/
#define REG_LR_FIFO 0x00
// Common settings
#define REG_LR_OPMODE 0x01
#define REG_LR_FRFMSB 0x06
#define REG_LR_FRFMID 0x07
#define REG_LR_FRFLSB 0x08
// Tx settings
#define REG_LR_PACONFIG 0x09
#define REG_LR_PARAMP 0x0A
#define REG_LR_OCP 0x0B
// Rx settings
#define REG_LR_LNA 0x0C
// LoRa registers
#define REG_LR_FIFOADDRPTR 0x0D
#define REG_LR_FIFOTXBASEADDR 0x0E
#define REG_LR_FIFORXBASEADDR 0x0F
#define REG_LR_FIFORXCURRENTADDR 0x10
#define REG_LR_IRQFLAGSMASK 0x11
#define REG_LR_IRQFLAGS 0x12
#define REG_LR_RXNBBYTES 0x13
#define REG_LR_RXHEADERCNTVALUEMSB 0x14
#define REG_LR_RXHEADERCNTVALUELSB 0x15
#define REG_LR_RXPACKETCNTVALUEMSB 0x16
#define REG_LR_RXPACKETCNTVALUELSB 0x17
#define REG_LR_MODEMSTAT 0x18
#define REG_LR_PKTSNRVALUE 0x19
#define REG_LR_PKTRSSIVALUE 0x1A
#define REG_LR_RSSIVALUE 0x1B
#define REG_LR_HOPCHANNEL 0x1C
#define REG_LR_MODEMCONFIG1 0x1D
#define REG_LR_MODEMCONFIG2 0x1E
#define REG_LR_SYMBTIMEOUTLSB 0x1F
#define REG_LR_PREAMBLEMSB 0x20
#define REG_LR_PREAMBLELSB 0x21
#define REG_LR_PAYLOADLENGTH 0x22
#define REG_LR_PAYLOADMAXLENGTH 0x23
#define REG_LR_HOPPERIOD 0x24
#define REG_LR_FIFORXBYTEADDR 0x25
#define REG_LR_MODEMCONFIG3 0x26
#define REG_LR_FEIMSB 0x28
#define REG_LR_FEIMID 0x29
#define REG_LR_FEILSB 0x2A
#define REG_LR_RSSIWIDEBAND 0x2C
#define REG_LR_TEST2F 0x2F
#define REG_LR_TEST30 0x30
#define REG_LR_DETECTOPTIMIZE 0x31
#define REG_LR_INVERTIQ 0x33
#define REG_LR_TEST36 0x36
#define REG_LR_DETECTIONTHRESHOLD 0x37
#define REG_LR_SYNCWORD 0x39
#define REG_LR_TEST3A 0x3A
#define REG_LR_INVERTIQ2 0x3B
// end of documented register in datasheet
// I/O settings
#define REG_LR_DIOMAPPING1 0x40
#define REG_LR_DIOMAPPING2 0x41
// Version
#define REG_LR_VERSION 0x42
// Additional settings
#define REG_LR_PLLHOP 0x44
#define REG_LR_TCXO 0x4B
#define REG_LR_PADAC 0x4D
#define REG_LR_FORMERTEMP 0x5B
#define REG_LR_BITRATEFRAC 0x5D
#define REG_LR_AGCREF 0x61
#define REG_LR_AGCTHRESH1 0x62
#define REG_LR_AGCTHRESH2 0x63
#define REG_LR_AGCTHRESH3 0x64
#define REG_LR_PLL 0x70
/*!
* ============================================================================
* SX1276 LoRa bits control definition
* ============================================================================
*/
/*!
* RegFifo
*/
/*!
* RegOpMode
*/
#define RFLR_OPMODE_LONGRANGEMODE_MASK 0x7F
#define RFLR_OPMODE_LONGRANGEMODE_OFF 0x00 // Default
#define RFLR_OPMODE_LONGRANGEMODE_ON 0x80
#define RFLR_OPMODE_ACCESSSHAREDREG_MASK 0xBF
#define RFLR_OPMODE_ACCESSSHAREDREG_ENABLE 0x40
#define RFLR_OPMODE_ACCESSSHAREDREG_DISABLE 0x00 // Default
#define RFLR_OPMODE_FREQMODE_ACCESS_MASK 0xF7
#define RFLR_OPMODE_FREQMODE_ACCESS_LF 0x08 // Default
#define RFLR_OPMODE_FREQMODE_ACCESS_HF 0x00
#define RFLR_OPMODE_MASK 0xF8
#define RFLR_OPMODE_SLEEP 0x00
#define RFLR_OPMODE_STANDBY 0x01 // Default
#define RFLR_OPMODE_SYNTHESIZER_TX 0x02
#define RFLR_OPMODE_TRANSMITTER 0x03
#define RFLR_OPMODE_SYNTHESIZER_RX 0x04
#define RFLR_OPMODE_RECEIVER 0x05
// LoRa specific modes
#define RFLR_OPMODE_RECEIVER_SINGLE 0x06
#define RFLR_OPMODE_CAD 0x07
/*!
* RegFrf (MHz)
*/
#define RFLR_FRFMSB_434_MHZ 0x6C // Default
#define RFLR_FRFMID_434_MHZ 0x80 // Default
#define RFLR_FRFLSB_434_MHZ 0x00 // Default
/*!
* RegPaConfig
*/
#define RFLR_PACONFIG_PASELECT_MASK 0x7F
#define RFLR_PACONFIG_PASELECT_PABOOST 0x80
#define RFLR_PACONFIG_PASELECT_RFO 0x00 // Default
#define RFLR_PACONFIG_MAX_POWER_MASK 0x8F
#define RFLR_PACONFIG_OUTPUTPOWER_MASK 0xF0
/*!
* RegPaRamp
*/
#define RFLR_PARAMP_TXBANDFORCE_MASK 0xEF
#define RFLR_PARAMP_TXBANDFORCE_BAND_SEL 0x10
#define RFLR_PARAMP_TXBANDFORCE_AUTO 0x00 // Default
#define RFLR_PARAMP_MASK 0xF0
#define RFLR_PARAMP_3400_US 0x00
#define RFLR_PARAMP_2000_US 0x01
#define RFLR_PARAMP_1000_US 0x02
#define RFLR_PARAMP_0500_US 0x03
#define RFLR_PARAMP_0250_US 0x04
#define RFLR_PARAMP_0125_US 0x05
#define RFLR_PARAMP_0100_US 0x06
#define RFLR_PARAMP_0062_US 0x07
#define RFLR_PARAMP_0050_US 0x08
#define RFLR_PARAMP_0040_US 0x09 // Default
#define RFLR_PARAMP_0031_US 0x0A
#define RFLR_PARAMP_0025_US 0x0B
#define RFLR_PARAMP_0020_US 0x0C
#define RFLR_PARAMP_0015_US 0x0D
#define RFLR_PARAMP_0012_US 0x0E
#define RFLR_PARAMP_0010_US 0x0F
/*!
* RegOcp
*/
#define RFLR_OCP_MASK 0xDF
#define RFLR_OCP_ON 0x20 // Default
#define RFLR_OCP_OFF 0x00
#define RFLR_OCP_TRIM_MASK 0xE0
#define RFLR_OCP_TRIM_045_MA 0x00
#define RFLR_OCP_TRIM_050_MA 0x01
#define RFLR_OCP_TRIM_055_MA 0x02
#define RFLR_OCP_TRIM_060_MA 0x03
#define RFLR_OCP_TRIM_065_MA 0x04
#define RFLR_OCP_TRIM_070_MA 0x05
#define RFLR_OCP_TRIM_075_MA 0x06
#define RFLR_OCP_TRIM_080_MA 0x07
#define RFLR_OCP_TRIM_085_MA 0x08
#define RFLR_OCP_TRIM_090_MA 0x09
#define RFLR_OCP_TRIM_095_MA 0x0A
#define RFLR_OCP_TRIM_100_MA 0x0B // Default
#define RFLR_OCP_TRIM_105_MA 0x0C
#define RFLR_OCP_TRIM_110_MA 0x0D
#define RFLR_OCP_TRIM_115_MA 0x0E
#define RFLR_OCP_TRIM_120_MA 0x0F
#define RFLR_OCP_TRIM_130_MA 0x10
#define RFLR_OCP_TRIM_140_MA 0x11
#define RFLR_OCP_TRIM_150_MA 0x12
#define RFLR_OCP_TRIM_160_MA 0x13
#define RFLR_OCP_TRIM_170_MA 0x14
#define RFLR_OCP_TRIM_180_MA 0x15
#define RFLR_OCP_TRIM_190_MA 0x16
#define RFLR_OCP_TRIM_200_MA 0x17
#define RFLR_OCP_TRIM_210_MA 0x18
#define RFLR_OCP_TRIM_220_MA 0x19
#define RFLR_OCP_TRIM_230_MA 0x1A
#define RFLR_OCP_TRIM_240_MA 0x1B
/*!
* RegLna
*/
#define RFLR_LNA_GAIN_MASK 0x1F
#define RFLR_LNA_GAIN_G1 0x20 // Default
#define RFLR_LNA_GAIN_G2 0x40
#define RFLR_LNA_GAIN_G3 0x60
#define RFLR_LNA_GAIN_G4 0x80
#define RFLR_LNA_GAIN_G5 0xA0
#define RFLR_LNA_GAIN_G6 0xC0
#define RFLR_LNA_BOOST_LF_MASK 0xE7
#define RFLR_LNA_BOOST_LF_DEFAULT 0x00 // Default
#define RFLR_LNA_BOOST_HF_MASK 0xFC
#define RFLR_LNA_BOOST_HF_OFF 0x00 // Default
#define RFLR_LNA_BOOST_HF_ON 0x03
/*!
* RegFifoAddrPtr
*/
#define RFLR_FIFOADDRPTR 0x00 // Default
/*!
* RegFifoTxBaseAddr
*/
#define RFLR_FIFOTXBASEADDR 0x80 // Default
/*!
* RegFifoTxBaseAddr
*/
#define RFLR_FIFORXBASEADDR 0x00 // Default
/*!
* RegFifoRxCurrentAddr (Read Only)
*/
/*!
* RegIrqFlagsMask
*/
#define RFLR_IRQFLAGS_RXTIMEOUT_MASK 0x80
#define RFLR_IRQFLAGS_RXDONE_MASK 0x40
#define RFLR_IRQFLAGS_PAYLOADCRCERROR_MASK 0x20
#define RFLR_IRQFLAGS_VALIDHEADER_MASK 0x10
#define RFLR_IRQFLAGS_TXDONE_MASK 0x08
#define RFLR_IRQFLAGS_CADDONE_MASK 0x04
#define RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL_MASK 0x02
#define RFLR_IRQFLAGS_CADDETECTED_MASK 0x01
/*!
* RegIrqFlags
*/
#define RFLR_IRQFLAGS_RXTIMEOUT 0x80
#define RFLR_IRQFLAGS_RXDONE 0x40
#define RFLR_IRQFLAGS_PAYLOADCRCERROR 0x20
#define RFLR_IRQFLAGS_VALIDHEADER 0x10
#define RFLR_IRQFLAGS_TXDONE 0x08
#define RFLR_IRQFLAGS_CADDONE 0x04
#define RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL 0x02
#define RFLR_IRQFLAGS_CADDETECTED 0x01
/*!
* RegFifoRxNbBytes (Read Only)
*/
/*!
* RegRxHeaderCntValueMsb (Read Only)
*/
/*!
* RegRxHeaderCntValueLsb (Read Only)
*/
/*!
* RegRxPacketCntValueMsb (Read Only)
*/
/*!
* RegRxPacketCntValueLsb (Read Only)
*/
/*!
* RegModemStat (Read Only)
*/
#define RFLR_MODEMSTAT_RX_CR_MASK 0x1F
#define RFLR_MODEMSTAT_MODEM_STATUS_MASK 0xE0
#define RFLR_MODEMSTAT_MODEM_CLEAR 0x10
#define RFLR_MODEMSTAT_HEADERINFO_VALID 0x08
#define RFLR_MODEMSTAT_RX_ONGOING 0x04
#define RFLR_MODEMSTAT_SIGNAL_SYNCRONIZED 0x02
#define RFLR_MODEMSTAT_SIGNAL_DETECTED 0x01
/*!
* RegPktSnrValue (Read Only)
*/
/*!
* RegPktRssiValue (Read Only)
*/
/*!
* RegRssiValue (Read Only)
*/
/*!
* RegHopChannel (Read Only)
*/
#define RFLR_HOPCHANNEL_PLL_LOCK_TIMEOUT_MASK 0x7F
#define RFLR_HOPCHANNEL_PLL_LOCK_FAIL 0x80
#define RFLR_HOPCHANNEL_PLL_LOCK_SUCCEED 0x00 // Default
#define RFLR_HOPCHANNEL_CRCONPAYLOAD_MASK 0xBF
#define RFLR_HOPCHANNEL_CRCONPAYLOAD_ON 0x40
#define RFLR_HOPCHANNEL_CRCONPAYLOAD_OFF 0x00 // Default
#define RFLR_HOPCHANNEL_CHANNEL_MASK 0x3F
/*!
* RegModemConfig1
*/
#define RFLR_MODEMCONFIG1_BW_MASK 0x0F
#define RFLR_MODEMCONFIG1_BW_7_81_KHZ 0x00
#define RFLR_MODEMCONFIG1_BW_10_41_KHZ 0x10
#define RFLR_MODEMCONFIG1_BW_15_62_KHZ 0x20
#define RFLR_MODEMCONFIG1_BW_20_83_KHZ 0x30
#define RFLR_MODEMCONFIG1_BW_31_25_KHZ 0x40
#define RFLR_MODEMCONFIG1_BW_41_66_KHZ 0x50
#define RFLR_MODEMCONFIG1_BW_62_50_KHZ 0x60
#define RFLR_MODEMCONFIG1_BW_125_KHZ 0x70 // Default
#define RFLR_MODEMCONFIG1_BW_250_KHZ 0x80
#define RFLR_MODEMCONFIG1_BW_500_KHZ 0x90
#define RFLR_MODEMCONFIG1_CODINGRATE_MASK 0xF1
#define RFLR_MODEMCONFIG1_CODINGRATE_4_5 0x02
#define RFLR_MODEMCONFIG1_CODINGRATE_4_6 0x04 // Default
#define RFLR_MODEMCONFIG1_CODINGRATE_4_7 0x06
#define RFLR_MODEMCONFIG1_CODINGRATE_4_8 0x08
#define RFLR_MODEMCONFIG1_IMPLICITHEADER_MASK 0xFE
#define RFLR_MODEMCONFIG1_IMPLICITHEADER_ON 0x01
#define RFLR_MODEMCONFIG1_IMPLICITHEADER_OFF 0x00 // Default
/*!
* RegModemConfig2
*/
#define RFLR_MODEMCONFIG2_SF_MASK 0x0F
#define RFLR_MODEMCONFIG2_SF_6 0x60
#define RFLR_MODEMCONFIG2_SF_7 0x70 // Default
#define RFLR_MODEMCONFIG2_SF_8 0x80
#define RFLR_MODEMCONFIG2_SF_9 0x90
#define RFLR_MODEMCONFIG2_SF_10 0xA0
#define RFLR_MODEMCONFIG2_SF_11 0xB0
#define RFLR_MODEMCONFIG2_SF_12 0xC0
#define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_MASK 0xF7
#define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_ON 0x08
#define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_OFF 0x00
#define RFLR_MODEMCONFIG2_RXPAYLOADCRC_MASK 0xFB
#define RFLR_MODEMCONFIG2_RXPAYLOADCRC_ON 0x04
#define RFLR_MODEMCONFIG2_RXPAYLOADCRC_OFF 0x00 // Default
#define RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB_MASK 0xFC
#define RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB 0x00 // Default
/*!
* RegSymbTimeoutLsb
*/
#define RFLR_SYMBTIMEOUTLSB_SYMBTIMEOUT 0x64 // Default
/*!
* RegPreambleLengthMsb
*/
#define RFLR_PREAMBLELENGTHMSB 0x00 // Default
/*!
* RegPreambleLengthLsb
*/
#define RFLR_PREAMBLELENGTHLSB 0x08 // Default
/*!
* RegPayloadLength
*/
#define RFLR_PAYLOADLENGTH 0x0E // Default
/*!
* RegPayloadMaxLength
*/
#define RFLR_PAYLOADMAXLENGTH 0xFF // Default
/*!
* RegHopPeriod
*/
#define RFLR_HOPPERIOD_FREQFOPPINGPERIOD 0x00 // Default
/*!
* RegFifoRxByteAddr (Read Only)
*/
/*!
* RegModemConfig3
*/
#define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_MASK 0xF7
#define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_ON 0x08
#define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_OFF 0x00 // Default
#define RFLR_MODEMCONFIG3_AGCAUTO_MASK 0xFB
#define RFLR_MODEMCONFIG3_AGCAUTO_ON 0x04 // Default
#define RFLR_MODEMCONFIG3_AGCAUTO_OFF 0x00
/*!
* RegFeiMsb (Read Only)
*/
/*!
* RegFeiMid (Read Only)
*/
/*!
* RegFeiLsb (Read Only)
*/
/*!
* RegRssiWideband (Read Only)
*/
/*!
* RegDetectOptimize
*/
#define RFLR_DETECTIONOPTIMIZE_MASK 0xF8
#define RFLR_DETECTIONOPTIMIZE_SF7_TO_SF12 0x03 // Default
#define RFLR_DETECTIONOPTIMIZE_SF6 0x05
/*!
* RegInvertIQ
*/
#define RFLR_INVERTIQ_RX_MASK 0xBF
#define RFLR_INVERTIQ_RX_OFF 0x00
#define RFLR_INVERTIQ_RX_ON 0x40
#define RFLR_INVERTIQ_TX_MASK 0xFE
#define RFLR_INVERTIQ_TX_OFF 0x01
#define RFLR_INVERTIQ_TX_ON 0x00
/*!
* RegDetectionThreshold
*/
#define RFLR_DETECTIONTHRESH_SF7_TO_SF12 0x0A // Default
#define RFLR_DETECTIONTHRESH_SF6 0x0C
/*!
* RegInvertIQ2
*/
#define RFLR_INVERTIQ2_ON 0x19
#define RFLR_INVERTIQ2_OFF 0x1D
/*!
* RegDioMapping1
*/
#define RFLR_DIOMAPPING1_DIO0_MASK 0x3F
#define RFLR_DIOMAPPING1_DIO0_00 0x00 // Default
#define RFLR_DIOMAPPING1_DIO0_01 0x40
#define RFLR_DIOMAPPING1_DIO0_10 0x80
#define RFLR_DIOMAPPING1_DIO0_11 0xC0
#define RFLR_DIOMAPPING1_DIO1_MASK 0xCF
#define RFLR_DIOMAPPING1_DIO1_00 0x00 // Default
#define RFLR_DIOMAPPING1_DIO1_01 0x10
#define RFLR_DIOMAPPING1_DIO1_10 0x20
#define RFLR_DIOMAPPING1_DIO1_11 0x30
#define RFLR_DIOMAPPING1_DIO2_MASK 0xF3
#define RFLR_DIOMAPPING1_DIO2_00 0x00 // Default
#define RFLR_DIOMAPPING1_DIO2_01 0x04
#define RFLR_DIOMAPPING1_DIO2_10 0x08
#define RFLR_DIOMAPPING1_DIO2_11 0x0C
#define RFLR_DIOMAPPING1_DIO3_MASK 0xFC
#define RFLR_DIOMAPPING1_DIO3_00 0x00 // Default
#define RFLR_DIOMAPPING1_DIO3_01 0x01
#define RFLR_DIOMAPPING1_DIO3_10 0x02
#define RFLR_DIOMAPPING1_DIO3_11 0x03
/*!
* RegDioMapping2
*/
#define RFLR_DIOMAPPING2_DIO4_MASK 0x3F
#define RFLR_DIOMAPPING2_DIO4_00 0x00 // Default
#define RFLR_DIOMAPPING2_DIO4_01 0x40
#define RFLR_DIOMAPPING2_DIO4_10 0x80
#define RFLR_DIOMAPPING2_DIO4_11 0xC0
#define RFLR_DIOMAPPING2_DIO5_MASK 0xCF
#define RFLR_DIOMAPPING2_DIO5_00 0x00 // Default
#define RFLR_DIOMAPPING2_DIO5_01 0x10
#define RFLR_DIOMAPPING2_DIO5_10 0x20
#define RFLR_DIOMAPPING2_DIO5_11 0x30
#define RFLR_DIOMAPPING2_MAP_MASK 0xFE
#define RFLR_DIOMAPPING2_MAP_PREAMBLEDETECT 0x01
#define RFLR_DIOMAPPING2_MAP_RSSI 0x00 // Default
/*!
* RegVersion (Read Only)
*/
/*!
* RegPllHop
*/
#define RFLR_PLLHOP_FASTHOP_MASK 0x7F
#define RFLR_PLLHOP_FASTHOP_ON 0x80
#define RFLR_PLLHOP_FASTHOP_OFF 0x00 // Default
/*!
* RegTcxo
*/
#define RFLR_TCXO_TCXOINPUT_MASK 0xEF
#define RFLR_TCXO_TCXOINPUT_ON 0x10
#define RFLR_TCXO_TCXOINPUT_OFF 0x00 // Default
/*!
* RegPaDac
*/
#define RFLR_PADAC_20DBM_MASK 0xF8
#define RFLR_PADAC_20DBM_ON 0x07
#define RFLR_PADAC_20DBM_OFF 0x04 // Default
/*!
* RegFormerTemp
*/
/*!
* RegBitrateFrac
*/
#define RF_BITRATEFRAC_MASK 0xF0
/*!
* RegAgcRef
*/
/*!
* RegAgcThresh1
*/
/*!
* RegAgcThresh2
*/
/*!
* RegAgcThresh3
*/
/*!
* RegPll
*/
#define RF_PLL_BANDWIDTH_MASK 0x3F
#define RF_PLL_BANDWIDTH_75 0x00
#define RF_PLL_BANDWIDTH_150 0x40
#define RF_PLL_BANDWIDTH_225 0x80
#define RF_PLL_BANDWIDTH_300 0xC0 // Default
#endif // __SX1276_REGS_LORA_H__