Ward Mattar
This is code is part of a Technion course project in advanced IoT, implementing a device to receive and present sensors data from a Formula racing car built by students at Technion - Israel Institute of Technology.
Fork of
DISCO-L072CZ-LRWAN1_LoRa_PingPong
by 
ST
This is code is part of a Technion course project in advanced IoT, implementing a device to receive sensors data from another L072CZ-LRWAN1 installed on a Formula racing car (built by students at Technion - Israel Institute of Technology), and sends it to a GUI presenting the data (GUI project: github.com/ward-mattar/TechnionFormulaGUI).
How to install
- Create an account on Mbed: https://os.mbed.com/account/signup/
- Import project into Compiler
- In the Program Workspace select "Formula_Nucleo_Receiver"
- Select a Platform like so:
- Click button at top-left
- Add Board
- Search "NUCLEO F103RB" and then "Add to your Mbed Compiler"
- Finally click "Compile", if the build was successful, the binary would download automatically
- To install it on device simply plug it in to a PC, open device drive and drag then drop binary file in it
Diff: SX1276GenericLib/registers/sx1276Regs-LoRa.h
- Revision:
- 12:046346a16ff4
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/SX1276GenericLib/registers/sx1276Regs-LoRa.h Sat May 19 15:42:38 2018 +0000 @@ -0,0 +1,571 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C) 2014 Semtech + +Description: SX1276 LoRa modem registers and bits definitions + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __SX1276_REGS_LORA_H__ +#define __SX1276_REGS_LORA_H__ + +/*! + * ============================================================================ + * SX1276 Internal registers Address + * ============================================================================ + */ +#define REG_LR_FIFO 0x00 +// Common settings +#define REG_LR_OPMODE 0x01 +#define REG_LR_FRFMSB 0x06 +#define REG_LR_FRFMID 0x07 +#define REG_LR_FRFLSB 0x08 +// Tx settings +#define REG_LR_PACONFIG 0x09 +#define REG_LR_PARAMP 0x0A +#define REG_LR_OCP 0x0B +// Rx settings +#define REG_LR_LNA 0x0C +// LoRa registers +#define REG_LR_FIFOADDRPTR 0x0D +#define REG_LR_FIFOTXBASEADDR 0x0E +#define REG_LR_FIFORXBASEADDR 0x0F +#define REG_LR_FIFORXCURRENTADDR 0x10 +#define REG_LR_IRQFLAGSMASK 0x11 +#define REG_LR_IRQFLAGS 0x12 +#define REG_LR_RXNBBYTES 0x13 +#define REG_LR_RXHEADERCNTVALUEMSB 0x14 +#define REG_LR_RXHEADERCNTVALUELSB 0x15 +#define REG_LR_RXPACKETCNTVALUEMSB 0x16 +#define REG_LR_RXPACKETCNTVALUELSB 0x17 +#define REG_LR_MODEMSTAT 0x18 +#define REG_LR_PKTSNRVALUE 0x19 +#define REG_LR_PKTRSSIVALUE 0x1A +#define REG_LR_RSSIVALUE 0x1B +#define REG_LR_HOPCHANNEL 0x1C +#define REG_LR_MODEMCONFIG1 0x1D +#define REG_LR_MODEMCONFIG2 0x1E +#define REG_LR_SYMBTIMEOUTLSB 0x1F +#define REG_LR_PREAMBLEMSB 0x20 +#define REG_LR_PREAMBLELSB 0x21 +#define REG_LR_PAYLOADLENGTH 0x22 +#define REG_LR_PAYLOADMAXLENGTH 0x23 +#define REG_LR_HOPPERIOD 0x24 +#define REG_LR_FIFORXBYTEADDR 0x25 +#define REG_LR_MODEMCONFIG3 0x26 +#define REG_LR_FEIMSB 0x28 +#define REG_LR_FEIMID 0x29 +#define REG_LR_FEILSB 0x2A +#define REG_LR_RSSIWIDEBAND 0x2C +#define REG_LR_TEST2F 0x2F +#define REG_LR_TEST30 0x30 +#define REG_LR_DETECTOPTIMIZE 0x31 +#define REG_LR_INVERTIQ 0x33 +#define REG_LR_TEST36 0x36 +#define REG_LR_DETECTIONTHRESHOLD 0x37 +#define REG_LR_SYNCWORD 0x39 +#define REG_LR_TEST3A 0x3A +#define REG_LR_INVERTIQ2 0x3B + +// end of documented register in datasheet +// I/O settings +#define REG_LR_DIOMAPPING1 0x40 +#define REG_LR_DIOMAPPING2 0x41 +// Version +#define REG_LR_VERSION 0x42 +// Additional settings +#define REG_LR_PLLHOP 0x44 +#define REG_LR_TCXO 0x4B +#define REG_LR_PADAC 0x4D +#define REG_LR_FORMERTEMP 0x5B +#define REG_LR_BITRATEFRAC 0x5D +#define REG_LR_AGCREF 0x61 +#define REG_LR_AGCTHRESH1 0x62 +#define REG_LR_AGCTHRESH2 0x63 +#define REG_LR_AGCTHRESH3 0x64 +#define REG_LR_PLL 0x70 + +/*! + * ============================================================================ + * SX1276 LoRa bits control definition + * ============================================================================ + */ + +/*! + * RegFifo + */ + +/*! + * RegOpMode + */ +#define RFLR_OPMODE_LONGRANGEMODE_MASK 0x7F +#define RFLR_OPMODE_LONGRANGEMODE_OFF 0x00 // Default +#define RFLR_OPMODE_LONGRANGEMODE_ON 0x80 + +#define RFLR_OPMODE_ACCESSSHAREDREG_MASK 0xBF +#define RFLR_OPMODE_ACCESSSHAREDREG_ENABLE 0x40 +#define RFLR_OPMODE_ACCESSSHAREDREG_DISABLE 0x00 // Default + +#define RFLR_OPMODE_FREQMODE_ACCESS_MASK 0xF7 +#define RFLR_OPMODE_FREQMODE_ACCESS_LF 0x08 // Default +#define RFLR_OPMODE_FREQMODE_ACCESS_HF 0x00 + +#define RFLR_OPMODE_MASK 0xF8 +#define RFLR_OPMODE_SLEEP 0x00 +#define RFLR_OPMODE_STANDBY 0x01 // Default +#define RFLR_OPMODE_SYNTHESIZER_TX 0x02 +#define RFLR_OPMODE_TRANSMITTER 0x03 +#define RFLR_OPMODE_SYNTHESIZER_RX 0x04 +#define RFLR_OPMODE_RECEIVER 0x05 +// LoRa specific modes +#define RFLR_OPMODE_RECEIVER_SINGLE 0x06 +#define RFLR_OPMODE_CAD 0x07 + +/*! + * RegFrf (MHz) + */ +#define RFLR_FRFMSB_434_MHZ 0x6C // Default +#define RFLR_FRFMID_434_MHZ 0x80 // Default +#define RFLR_FRFLSB_434_MHZ 0x00 // Default + +/*! + * RegPaConfig + */ +#define RFLR_PACONFIG_PASELECT_MASK 0x7F +#define RFLR_PACONFIG_PASELECT_PABOOST 0x80 +#define RFLR_PACONFIG_PASELECT_RFO 0x00 // Default + +#define RFLR_PACONFIG_MAX_POWER_MASK 0x8F + +#define RFLR_PACONFIG_OUTPUTPOWER_MASK 0xF0 + +/*! + * RegPaRamp + */ +#define RFLR_PARAMP_TXBANDFORCE_MASK 0xEF +#define RFLR_PARAMP_TXBANDFORCE_BAND_SEL 0x10 +#define RFLR_PARAMP_TXBANDFORCE_AUTO 0x00 // Default + +#define RFLR_PARAMP_MASK 0xF0 +#define RFLR_PARAMP_3400_US 0x00 +#define RFLR_PARAMP_2000_US 0x01 +#define RFLR_PARAMP_1000_US 0x02 +#define RFLR_PARAMP_0500_US 0x03 +#define RFLR_PARAMP_0250_US 0x04 +#define RFLR_PARAMP_0125_US 0x05 +#define RFLR_PARAMP_0100_US 0x06 +#define RFLR_PARAMP_0062_US 0x07 +#define RFLR_PARAMP_0050_US 0x08 +#define RFLR_PARAMP_0040_US 0x09 // Default +#define RFLR_PARAMP_0031_US 0x0A +#define RFLR_PARAMP_0025_US 0x0B +#define RFLR_PARAMP_0020_US 0x0C +#define RFLR_PARAMP_0015_US 0x0D +#define RFLR_PARAMP_0012_US 0x0E +#define RFLR_PARAMP_0010_US 0x0F + +/*! + * RegOcp + */ +#define RFLR_OCP_MASK 0xDF +#define RFLR_OCP_ON 0x20 // Default +#define RFLR_OCP_OFF 0x00 + +#define RFLR_OCP_TRIM_MASK 0xE0 +#define RFLR_OCP_TRIM_045_MA 0x00 +#define RFLR_OCP_TRIM_050_MA 0x01 +#define RFLR_OCP_TRIM_055_MA 0x02 +#define RFLR_OCP_TRIM_060_MA 0x03 +#define RFLR_OCP_TRIM_065_MA 0x04 +#define RFLR_OCP_TRIM_070_MA 0x05 +#define RFLR_OCP_TRIM_075_MA 0x06 +#define RFLR_OCP_TRIM_080_MA 0x07 +#define RFLR_OCP_TRIM_085_MA 0x08 +#define RFLR_OCP_TRIM_090_MA 0x09 +#define RFLR_OCP_TRIM_095_MA 0x0A +#define RFLR_OCP_TRIM_100_MA 0x0B // Default +#define RFLR_OCP_TRIM_105_MA 0x0C +#define RFLR_OCP_TRIM_110_MA 0x0D +#define RFLR_OCP_TRIM_115_MA 0x0E +#define RFLR_OCP_TRIM_120_MA 0x0F +#define RFLR_OCP_TRIM_130_MA 0x10 +#define RFLR_OCP_TRIM_140_MA 0x11 +#define RFLR_OCP_TRIM_150_MA 0x12 +#define RFLR_OCP_TRIM_160_MA 0x13 +#define RFLR_OCP_TRIM_170_MA 0x14 +#define RFLR_OCP_TRIM_180_MA 0x15 +#define RFLR_OCP_TRIM_190_MA 0x16 +#define RFLR_OCP_TRIM_200_MA 0x17 +#define RFLR_OCP_TRIM_210_MA 0x18 +#define RFLR_OCP_TRIM_220_MA 0x19 +#define RFLR_OCP_TRIM_230_MA 0x1A +#define RFLR_OCP_TRIM_240_MA 0x1B + +/*! + * RegLna + */ +#define RFLR_LNA_GAIN_MASK 0x1F +#define RFLR_LNA_GAIN_G1 0x20 // Default +#define RFLR_LNA_GAIN_G2 0x40 +#define RFLR_LNA_GAIN_G3 0x60 +#define RFLR_LNA_GAIN_G4 0x80 +#define RFLR_LNA_GAIN_G5 0xA0 +#define RFLR_LNA_GAIN_G6 0xC0 + +#define RFLR_LNA_BOOST_LF_MASK 0xE7 +#define RFLR_LNA_BOOST_LF_DEFAULT 0x00 // Default + +#define RFLR_LNA_BOOST_HF_MASK 0xFC +#define RFLR_LNA_BOOST_HF_OFF 0x00 // Default +#define RFLR_LNA_BOOST_HF_ON 0x03 + +/*! + * RegFifoAddrPtr + */ +#define RFLR_FIFOADDRPTR 0x00 // Default + +/*! + * RegFifoTxBaseAddr + */ +#define RFLR_FIFOTXBASEADDR 0x80 // Default + +/*! + * RegFifoTxBaseAddr + */ +#define RFLR_FIFORXBASEADDR 0x00 // Default + +/*! + * RegFifoRxCurrentAddr (Read Only) + */ + +/*! + * RegIrqFlagsMask + */ +#define RFLR_IRQFLAGS_RXTIMEOUT_MASK 0x80 +#define RFLR_IRQFLAGS_RXDONE_MASK 0x40 +#define RFLR_IRQFLAGS_PAYLOADCRCERROR_MASK 0x20 +#define RFLR_IRQFLAGS_VALIDHEADER_MASK 0x10 +#define RFLR_IRQFLAGS_TXDONE_MASK 0x08 +#define RFLR_IRQFLAGS_CADDONE_MASK 0x04 +#define RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL_MASK 0x02 +#define RFLR_IRQFLAGS_CADDETECTED_MASK 0x01 + +/*! + * RegIrqFlags + */ +#define RFLR_IRQFLAGS_RXTIMEOUT 0x80 +#define RFLR_IRQFLAGS_RXDONE 0x40 +#define RFLR_IRQFLAGS_PAYLOADCRCERROR 0x20 +#define RFLR_IRQFLAGS_VALIDHEADER 0x10 +#define RFLR_IRQFLAGS_TXDONE 0x08 +#define RFLR_IRQFLAGS_CADDONE 0x04 +#define RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL 0x02 +#define RFLR_IRQFLAGS_CADDETECTED 0x01 + +/*! + * RegFifoRxNbBytes (Read Only) + */ + +/*! + * RegRxHeaderCntValueMsb (Read Only) + */ + +/*! + * RegRxHeaderCntValueLsb (Read Only) + */ + +/*! + * RegRxPacketCntValueMsb (Read Only) + */ + +/*! + * RegRxPacketCntValueLsb (Read Only) + */ + +/*! + * RegModemStat (Read Only) + */ +#define RFLR_MODEMSTAT_RX_CR_MASK 0x1F +#define RFLR_MODEMSTAT_MODEM_STATUS_MASK 0xE0 + +#define RFLR_MODEMSTAT_MODEM_CLEAR 0x10 +#define RFLR_MODEMSTAT_HEADERINFO_VALID 0x08 +#define RFLR_MODEMSTAT_RX_ONGOING 0x04 +#define RFLR_MODEMSTAT_SIGNAL_SYNCRONIZED 0x02 +#define RFLR_MODEMSTAT_SIGNAL_DETECTED 0x01 + +/*! + * RegPktSnrValue (Read Only) + */ + +/*! + * RegPktRssiValue (Read Only) + */ + +/*! + * RegRssiValue (Read Only) + */ + +/*! + * RegHopChannel (Read Only) + */ +#define RFLR_HOPCHANNEL_PLL_LOCK_TIMEOUT_MASK 0x7F +#define RFLR_HOPCHANNEL_PLL_LOCK_FAIL 0x80 +#define RFLR_HOPCHANNEL_PLL_LOCK_SUCCEED 0x00 // Default + +#define RFLR_HOPCHANNEL_CRCONPAYLOAD_MASK 0xBF +#define RFLR_HOPCHANNEL_CRCONPAYLOAD_ON 0x40 +#define RFLR_HOPCHANNEL_CRCONPAYLOAD_OFF 0x00 // Default + +#define RFLR_HOPCHANNEL_CHANNEL_MASK 0x3F + +/*! + * RegModemConfig1 + */ +#define RFLR_MODEMCONFIG1_BW_MASK 0x0F +#define RFLR_MODEMCONFIG1_BW_7_81_KHZ 0x00 +#define RFLR_MODEMCONFIG1_BW_10_41_KHZ 0x10 +#define RFLR_MODEMCONFIG1_BW_15_62_KHZ 0x20 +#define RFLR_MODEMCONFIG1_BW_20_83_KHZ 0x30 +#define RFLR_MODEMCONFIG1_BW_31_25_KHZ 0x40 +#define RFLR_MODEMCONFIG1_BW_41_66_KHZ 0x50 +#define RFLR_MODEMCONFIG1_BW_62_50_KHZ 0x60 +#define RFLR_MODEMCONFIG1_BW_125_KHZ 0x70 // Default +#define RFLR_MODEMCONFIG1_BW_250_KHZ 0x80 +#define RFLR_MODEMCONFIG1_BW_500_KHZ 0x90 + +#define RFLR_MODEMCONFIG1_CODINGRATE_MASK 0xF1 +#define RFLR_MODEMCONFIG1_CODINGRATE_4_5 0x02 +#define RFLR_MODEMCONFIG1_CODINGRATE_4_6 0x04 // Default +#define RFLR_MODEMCONFIG1_CODINGRATE_4_7 0x06 +#define RFLR_MODEMCONFIG1_CODINGRATE_4_8 0x08 + +#define RFLR_MODEMCONFIG1_IMPLICITHEADER_MASK 0xFE +#define RFLR_MODEMCONFIG1_IMPLICITHEADER_ON 0x01 +#define RFLR_MODEMCONFIG1_IMPLICITHEADER_OFF 0x00 // Default + +/*! + * RegModemConfig2 + */ +#define RFLR_MODEMCONFIG2_SF_MASK 0x0F +#define RFLR_MODEMCONFIG2_SF_6 0x60 +#define RFLR_MODEMCONFIG2_SF_7 0x70 // Default +#define RFLR_MODEMCONFIG2_SF_8 0x80 +#define RFLR_MODEMCONFIG2_SF_9 0x90 +#define RFLR_MODEMCONFIG2_SF_10 0xA0 +#define RFLR_MODEMCONFIG2_SF_11 0xB0 +#define RFLR_MODEMCONFIG2_SF_12 0xC0 + +#define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_MASK 0xF7 +#define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_ON 0x08 +#define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_OFF 0x00 + +#define RFLR_MODEMCONFIG2_RXPAYLOADCRC_MASK 0xFB +#define RFLR_MODEMCONFIG2_RXPAYLOADCRC_ON 0x04 +#define RFLR_MODEMCONFIG2_RXPAYLOADCRC_OFF 0x00 // Default + +#define RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB_MASK 0xFC +#define RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB 0x00 // Default + +/*! + * RegSymbTimeoutLsb + */ +#define RFLR_SYMBTIMEOUTLSB_SYMBTIMEOUT 0x64 // Default + +/*! + * RegPreambleLengthMsb + */ +#define RFLR_PREAMBLELENGTHMSB 0x00 // Default + +/*! + * RegPreambleLengthLsb + */ +#define RFLR_PREAMBLELENGTHLSB 0x08 // Default + +/*! + * RegPayloadLength + */ +#define RFLR_PAYLOADLENGTH 0x0E // Default + +/*! + * RegPayloadMaxLength + */ +#define RFLR_PAYLOADMAXLENGTH 0xFF // Default + +/*! + * RegHopPeriod + */ +#define RFLR_HOPPERIOD_FREQFOPPINGPERIOD 0x00 // Default + +/*! + * RegFifoRxByteAddr (Read Only) + */ + +/*! + * RegModemConfig3 + */ +#define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_MASK 0xF7 +#define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_ON 0x08 +#define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_OFF 0x00 // Default + +#define RFLR_MODEMCONFIG3_AGCAUTO_MASK 0xFB +#define RFLR_MODEMCONFIG3_AGCAUTO_ON 0x04 // Default +#define RFLR_MODEMCONFIG3_AGCAUTO_OFF 0x00 + +/*! + * RegFeiMsb (Read Only) + */ + +/*! + * RegFeiMid (Read Only) + */ + +/*! + * RegFeiLsb (Read Only) + */ + +/*! + * RegRssiWideband (Read Only) + */ + +/*! + * RegDetectOptimize + */ +#define RFLR_DETECTIONOPTIMIZE_MASK 0xF8 +#define RFLR_DETECTIONOPTIMIZE_SF7_TO_SF12 0x03 // Default +#define RFLR_DETECTIONOPTIMIZE_SF6 0x05 + +/*! + * RegInvertIQ + */ +#define RFLR_INVERTIQ_RX_MASK 0xBF +#define RFLR_INVERTIQ_RX_OFF 0x00 +#define RFLR_INVERTIQ_RX_ON 0x40 +#define RFLR_INVERTIQ_TX_MASK 0xFE +#define RFLR_INVERTIQ_TX_OFF 0x01 +#define RFLR_INVERTIQ_TX_ON 0x00 + +/*! + * RegDetectionThreshold + */ +#define RFLR_DETECTIONTHRESH_SF7_TO_SF12 0x0A // Default +#define RFLR_DETECTIONTHRESH_SF6 0x0C + +/*! + * RegInvertIQ2 + */ +#define RFLR_INVERTIQ2_ON 0x19 +#define RFLR_INVERTIQ2_OFF 0x1D + +/*! + * RegDioMapping1 + */ +#define RFLR_DIOMAPPING1_DIO0_MASK 0x3F +#define RFLR_DIOMAPPING1_DIO0_00 0x00 // Default +#define RFLR_DIOMAPPING1_DIO0_01 0x40 +#define RFLR_DIOMAPPING1_DIO0_10 0x80 +#define RFLR_DIOMAPPING1_DIO0_11 0xC0 + +#define RFLR_DIOMAPPING1_DIO1_MASK 0xCF +#define RFLR_DIOMAPPING1_DIO1_00 0x00 // Default +#define RFLR_DIOMAPPING1_DIO1_01 0x10 +#define RFLR_DIOMAPPING1_DIO1_10 0x20 +#define RFLR_DIOMAPPING1_DIO1_11 0x30 + +#define RFLR_DIOMAPPING1_DIO2_MASK 0xF3 +#define RFLR_DIOMAPPING1_DIO2_00 0x00 // Default +#define RFLR_DIOMAPPING1_DIO2_01 0x04 +#define RFLR_DIOMAPPING1_DIO2_10 0x08 +#define RFLR_DIOMAPPING1_DIO2_11 0x0C + +#define RFLR_DIOMAPPING1_DIO3_MASK 0xFC +#define RFLR_DIOMAPPING1_DIO3_00 0x00 // Default +#define RFLR_DIOMAPPING1_DIO3_01 0x01 +#define RFLR_DIOMAPPING1_DIO3_10 0x02 +#define RFLR_DIOMAPPING1_DIO3_11 0x03 + +/*! + * RegDioMapping2 + */ +#define RFLR_DIOMAPPING2_DIO4_MASK 0x3F +#define RFLR_DIOMAPPING2_DIO4_00 0x00 // Default +#define RFLR_DIOMAPPING2_DIO4_01 0x40 +#define RFLR_DIOMAPPING2_DIO4_10 0x80 +#define RFLR_DIOMAPPING2_DIO4_11 0xC0 + +#define RFLR_DIOMAPPING2_DIO5_MASK 0xCF +#define RFLR_DIOMAPPING2_DIO5_00 0x00 // Default +#define RFLR_DIOMAPPING2_DIO5_01 0x10 +#define RFLR_DIOMAPPING2_DIO5_10 0x20 +#define RFLR_DIOMAPPING2_DIO5_11 0x30 + +#define RFLR_DIOMAPPING2_MAP_MASK 0xFE +#define RFLR_DIOMAPPING2_MAP_PREAMBLEDETECT 0x01 +#define RFLR_DIOMAPPING2_MAP_RSSI 0x00 // Default + +/*! + * RegVersion (Read Only) + */ + +/*! + * RegPllHop + */ +#define RFLR_PLLHOP_FASTHOP_MASK 0x7F +#define RFLR_PLLHOP_FASTHOP_ON 0x80 +#define RFLR_PLLHOP_FASTHOP_OFF 0x00 // Default + +/*! + * RegTcxo + */ +#define RFLR_TCXO_TCXOINPUT_MASK 0xEF +#define RFLR_TCXO_TCXOINPUT_ON 0x10 +#define RFLR_TCXO_TCXOINPUT_OFF 0x00 // Default + +/*! + * RegPaDac + */ +#define RFLR_PADAC_20DBM_MASK 0xF8 +#define RFLR_PADAC_20DBM_ON 0x07 +#define RFLR_PADAC_20DBM_OFF 0x04 // Default + +/*! + * RegFormerTemp + */ + +/*! + * RegBitrateFrac + */ +#define RF_BITRATEFRAC_MASK 0xF0 + +/*! + * RegAgcRef + */ + +/*! + * RegAgcThresh1 + */ + +/*! + * RegAgcThresh2 + */ + +/*! + * RegAgcThresh3 + */ + +/*! + * RegPll + */ +#define RF_PLL_BANDWIDTH_MASK 0x3F +#define RF_PLL_BANDWIDTH_75 0x00 +#define RF_PLL_BANDWIDTH_150 0x40 +#define RF_PLL_BANDWIDTH_225 0x80 +#define RF_PLL_BANDWIDTH_300 0xC0 // Default + +#endif // __SX1276_REGS_LORA_H__