Vipin Ranka / MGAS_GR_Peach

This is the final version of Mini Gateway for Automation and Security desgined for Renesas GR Peach Design Contest

Dependencies:   GR-PEACH_video GraphicsFramework HTTPServer R_BSP mbed-rpc mbed-rtos Socket lwip-eth lwip-sys lwip FATFileSystem

Fork of mbed-os-example-mbed5-blinky by mbed-os-examples

Embed: (wiki syntax)

« Back to documentation index

Serial Class Reference
Public Member Functions | Protected Member Functions

Serial Class Reference
[Drivers]

A serial port (UART) for communication with other serial devices. More...

#include <Serial.h>

Inherits mbed::SerialBase, and mbed::Stream.

Public Member Functions

 Serial (PinName tx, PinName rx, const char *name=NULL, int baud=MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE)
 Create a Serial port, connected to the specified transmit and receive pins.
 Serial (PinName tx, PinName rx, int baud)
 Create a Serial port, connected to the specified transmit and receive pins, with the specified baud.
void baud (int baudrate)
 Set the baud rate of the serial port.
void format (int bits=8, Parity parity=SerialBase::None, int stop_bits=1)
 Set the transmission format used by the serial port.
int readable ()
 Determine if there is a character available to read.
int writeable ()
 Determine if there is space available to write a character.
void attach (Callback< void()> func, IrqType type=RxIrq)
 Attach a function to call whenever a serial interrupt is generated.
template<typename T >
 MBED_DEPRECATED_SINCE ("mbed-os-5.1","The attach function does not support cv-qualifiers. Replaced by ""attach(callback(obj, method), type).") void attach(T *obj
 Attach a member function to call whenever a serial interrupt is generated.
void set_flow_control (Flow type, PinName flow1=NC, PinName flow2=NC)
 Set the flow control type on the serial port.
int write (const uint8_t *buffer, int length, const event_callback_t &callback, int event=SERIAL_EVENT_TX_COMPLETE)
 Begin asynchronous write using 8bit buffer.
int write (const uint16_t *buffer, int length, const event_callback_t &callback, int event=SERIAL_EVENT_TX_COMPLETE)
 Begin asynchronous write using 16bit buffer.
void abort_write ()
 Abort the on-going write transfer.
int read (uint8_t *buffer, int length, const event_callback_t &callback, int event=SERIAL_EVENT_RX_COMPLETE, unsigned char char_match=SERIAL_RESERVED_CHAR_MATCH)
 Begin asynchronous reading using 8bit buffer.
int read (uint16_t *buffer, int length, const event_callback_t &callback, int event=SERIAL_EVENT_RX_COMPLETE, unsigned char char_match=SERIAL_RESERVED_CHAR_MATCH)
 Begin asynchronous reading using 16bit buffer.
void abort_read ()
 Abort the on-going read transfer.
int set_dma_usage_tx (DMAUsage usage)
 Configure DMA usage suggestion for non-blocking TX transfers.
int set_dma_usage_rx (DMAUsage usage)
 Configure DMA usage suggestion for non-blocking RX transfers.

Protected Member Functions

virtual void lock ()
 Acquire exclusive access to this serial port.
virtual void unlock ()
 Release exclusive access to this serial port.
virtual int close ()
 Close the file.
virtual ssize_t write (const void *buffer, size_t length)
 Write the contents of a buffer to the file.
virtual ssize_t read (void *buffer, size_t length)
 Function read Reads the contents of the file into a buffer.
virtual off_t lseek (off_t offset, int whence)
 Move the file position to a given offset from a given location.
virtual int isatty ()
 Check if the handle is for a interactive terminal device.
virtual int fsync ()
 Flush any buffers associated with the FileHandle, ensuring it is up to date on disk.

Detailed Description

A serial port (UART) for communication with other serial devices.

Can be used for Full Duplex communication, or Simplex by specifying one pin as NC (Not Connected)

Synchronization level: Thread safe

Example: 

 // Print "Hello World" to the PC

 #include "mbed.h"

 Serial pc(USBTX, USBRX);

 int main() {
     pc.printf("Hello World\n");
 }

Definition at line 52 of file Serial.h.

Member Function Documentation

void baud ( int  baudrate ) [inherited]

Set the baud rate of the serial port.

Parameters:
baudrateThe baudrate of the serial port (default = 9600).

Definition at line 43 of file SerialBase.cpp.

Generated on Tue Jul 12 2022 15:11:08 by  doxygen 1.7.2