Generation 3 of the Harp project

Dependencies:   Servo TMP36 GZ buffered-serial1 chan_fatfs_sd nmea_parser watchdog mbed-rtos mbed

Fork of HARP2 by Tyler Weaver

config.h

Committer:
tylerjw
Date:
2013-01-10
Revision:
29:8cdb56a0fe57
Parent:
27:24fd8e32511c
Child:
30:b81274979e73

File content as of revision 29:8cdb56a0fe57:

// file containing configuration values

#ifndef HARP_CONFIG_H
#define HARP_CONFIG_H

#define WAIT_FOR_LOCK   0 // set to 1 to not open log file until gps lock
#define UNLOCK_ON_FALL  0 // set to 1 to not signal parachute untill falling
#define RELEASE_AT_ALT  0 // set to 1 for release at target altitude (must also set UNLOCK_ON_FALL to 1)
#define ALARM           0 // set to 1 to key alarm on descent, 0 = no alarm 

const float target_lat = 39.921664;    // for setting the target location!
const float target_lon = -105.008167;

const float course_fudge = 15.0; // if -course_fudge < course > course_fudge then don't turn
const float neg_course_fudge = -15.0;

const float distance_fudge_km = 0.1; // stop turning if within distance_fudge km

const float BAT_GPS_MUL = 16.14; // values for calculating battery voltage
const float BAT_MBED_MUL = 10.35;

const float SERVO_L_MAX = 0.0007; // servo calibration
const float SERVO_L_MIN = -0.0013; // servo calibration
const float SERVO_R_MAX = 0.0006; // servo calibration
const float SERVO_R_MIN = -0.0015; // servo calibration

const int RELEASE_ALT = 4572; // 15k ft in meeters
const int ALARM_ALT = 2133; // altitude to key alarm on descent

#endif