Xbee API Test 3

Dependencies:   XBee mbed

> help
h or help
m <status-in-hex>,. ... Modem status
l <cmd>,<val-in-hex>.   ... exec <cmd> (AT) at this host.
lset fid <val-in-hex>. ... set local frame id. default is 1.
lset cmd <val-in-hex>. ... set local command.
lset val <val-in-hex>. ... set local command value.
q <cmd>,<val-in-hex>.   ... set queue parameter value.
r <cmd>,<val-in-hex>.   ... exec <cmd> (AT)at remote host.
rset a16 <val-in-hex>. ... set remote address high.
rset a64 <val-in-hex>,<val-in-hex>.  ... set remote address low.
rset fid <val-in-hex>. ... set remote frame id. default is 1.

> l D4,0x05
cmd=D4 val=0x05
apiId=88

object 100008c8:35 01 00 10 88 00 05 FE 04 01 00 FF

l OK:

> l D4,0x04
cmd=D4 val=0x04
apiId=88

object 100008c8:35 01 00 10 88 00 05 FE 04 01 00 FF

l OK:

>
Revision:
0:3edcfa3aba71
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/LPC1768/netCfg.h	Sat Jul 21 04:09:54 2012 +0000
@@ -0,0 +1,14 @@
+//This file has been auto-generated, please do not modify here.
+#ifndef __ETHERNETNETIF_CONFIG_H
+#define NET_TELIT_STACK 0
+#define NET_GPRS 0
+#define NET_PPP 0
+#define NET_ZG2100 0
+#define TARGET_LPC1768 1
+#define NET_GPRS_MODULE 0
+#define NET_ETH 1
+#define NET_USB_SERIAL 0
+#define NET_CFG_H 1
+#define NET_USB 0
+#define NET_LWIP_STACK 1
+#endif