File content as of revision 5:39fe91b6d3f0:

#include "mbed.h"
#include "max32630fthr.h"
#include "USBMSD_SD.h"

MAX32630FTHR pegasus;

// Hardware serial port over DAPLink
Serial daplink(P2_1, P2_0);

DigitalOut rLED(LED1, LED_ON);
DigitalOut gLED(LED2, LED_OFF);
DigitalOut bLED(LED3, LED_OFF);
AnalogIn monIn(AIN_0);
AnalogIn vddbIn(AIN_6);
AnalogIn vdd18In(AIN_7);
AnalogIn vdd12In(AIN_8);
AnalogIn vrtcIn(AIN_9);

// Function to report failure
void testFailed()
{
    daplink.printf("\r\n! Test Failed !\r\n");
    rLED = LED_ON;
    gLED = LED_OFF;
    bLED = LED_OFF;
    while(1) {
        Thread::wait(500);
        gLED = !gLED;
    }
}

// Function to read monitor port
float readMon(MAX14690::monCfg_t monCfg){
    pegasus.max14690.monSet(monCfg, MAX14690::MON_DIV4);
    Thread::wait(5);
    return (4.8f * monIn);  
}

// main() runs in its own thread in the OS
// (note the calls to Thread::wait below for delays)
int main()
{
    float aIn;
    daplink.printf("Initializing MAX32630FTHR\r\n");
    pegasus.init(MAX32630FTHR::VIO_3V3);
    daplink.printf("Checking Supplies\r\n");
    aIn = 2.4f * vdd12In;
    daplink.printf("vdd12 = %f\r\n", aIn);
    if ((aIn < 1.0f) || (aIn > 1.4f)) { testFailed(); }
    aIn = 2.4f * vdd18In;
    daplink.printf("vdd18 = %f\r\n", aIn);
    if ((aIn < 1.6f) || (aIn > 2.0f)) { testFailed(); }
    aIn = 4.8f * vddbIn;
    daplink.printf("vddb = %f\r\n", aIn);
    if ((aIn < 3.0f) || (aIn > 3.6f)) { testFailed(); }
    aIn = 2.4f * vrtcIn;
    daplink.printf("vrtc = %f\r\n", aIn);
    if ((aIn < 1.6f) || (aIn > 2.0f)) { testFailed(); }
    aIn = readMon(MAX14690::MON_SYS);
    daplink.printf("sys = %f\r\n", aIn);
    if ((aIn < 3.0f) || (aIn > 5.0f)) { testFailed(); }
    aIn = readMon(MAX14690::MON_BUCK1);
    daplink.printf("buck1 = %f\r\n", aIn);
    if ((aIn < 1.0f) || (aIn > 1.4f)) { testFailed(); }
    aIn = readMon(MAX14690::MON_BUCK2);
    daplink.printf("buck2 = %f\r\n", aIn);
    if ((aIn < 1.6f) || (aIn > 2.0f)) { testFailed(); }
    aIn = readMon(MAX14690::MON_LDO1);
    daplink.printf("ldo1 = %f\r\n", aIn);
    if ((aIn < 1.6f) || (aIn > 2.0f)) { testFailed(); }
    aIn = readMon(MAX14690::MON_LDO2);
    daplink.printf("ldo2 = %f\r\n", aIn);
    if ((aIn < 3.0f) || (aIn > 3.6f)) { testFailed(); }
    aIn = readMon(MAX14690::MON_LDO3);
    daplink.printf("ldo3 = %f\r\n", aIn);
    aIn = readMon(MAX14690::MON_LDO3);

    gLED = LED_ON;

    USBMSD_SD sd(P0_5, P0_6, P0_4, P0_7);  // mosi, miso, sclk, cs
    rLED = LED_OFF;

    bLED = LED_ON;
    daplink.printf("Self Test Passed\r\n");
        
    while (true) {
        Thread::wait(500);
        rLED = LED_OFF;
        gLED = LED_ON;
        bLED = LED_OFF;
        Thread::wait(500);
        rLED = LED_ON;
        gLED = LED_ON;
        bLED = LED_ON;
    }
}