File content as of revision 0:58c3d014a4e7:
/*
* Copyright (c) 2001-2003 Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
* Author: Adam Dunkels <adam@sics.se>
*
*/
#ifndef __LWIPOPTS_H__
#define __LWIPOPTS_H__
#include "netCfg.h"
#if NET_LWIP_STACK
//#include "arch/sys_arch.h"
/* <sys/time.h> is included in cc.h! */
#define LWIP_TIMEVAL_PRIVATE 0
//#define __LWIP_DEBUG
#include "dbg/dbg.h"
#ifdef __LWIP_DEBUG
#define LWIP_DEBUG 1
#define LWIP_DBG_MIN_LEVEL 0
//#define LWIP_COMPAT_SOCKETS 1
#define TAPIF_DEBUG LWIP_DBG_OFF
#define TUNIF_DEBUG LWIP_DBG_OFF
#define UNIXIF_DEBUG LWIP_DBG_OFF
#define DELIF_DEBUG LWIP_DBG_OFF
#define SIO_FIFO_DEBUG LWIP_DBG_ON
#define TCPDUMP_DEBUG LWIP_DBG_ON
#define PPP_DEBUG LWIP_DBG_OFF
#define MEM_DEBUG LWIP_DBG_OFF
#define MEMP_DEBUG LWIP_DBG_OFF
#define PBUF_DEBUG LWIP_DBG_OFF
#define API_LIB_DEBUG LWIP_DBG_OFF
#define API_MSG_DEBUG LWIP_DBG_OFF
#define TCPIP_DEBUG LWIP_DBG_OFF
#define NETIF_DEBUG LWIP_DBG_OFF
#define SOCKETS_DEBUG LWIP_DBG_OFF
#define DEMO_DEBUG LWIP_DBG_OFF
#define IP_DEBUG LWIP_DBG_OFF
#define IP_REASS_DEBUG LWIP_DBG_OFF
#define RAW_DEBUG LWIP_DBG_OFF
#define ICMP_DEBUG LWIP_DBG_OFF
#define IGMP_DEBUG LWIP_DBG_OFF
#define UDP_DEBUG LWIP_DBG_OFF
#define TCP_DEBUG LWIP_DBG_OFF
#define TCP_INPUT_DEBUG LWIP_DBG_OFF
#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF
#define TCP_RTO_DEBUG LWIP_DBG_OFF
#define TCP_CWND_DEBUG LWIP_DBG_OFF
#define TCP_WND_DEBUG LWIP_DBG_OFF
#define TCP_FR_DEBUG LWIP_DBG_OFF
#define TCP_QLEN_DEBUG LWIP_DBG_OFF
#define TCP_RST_DEBUG LWIP_DBG_OFF
#define ETHARP_DEBUG LWIP_DBG_OFF
#define DNS_DEBUG LWIP_DBG_OFF
#endif
/*
extern unsigned char debug_flags;
#define LWIP_DBG_TYPES_ON debug_flags
*/
#define NO_SYS 1
#define LWIP_SOCKET (NO_SYS==0)
#define LWIP_NETCONN (NO_SYS==0)
#define IP_FRAG_USES_STATIC_BUF 0
/* ---------- Memory options ---------- */
/* MEM_ALIGNMENT: should be set to the alignment of the CPU for which
lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2
byte alignment -> define MEM_ALIGNMENT to 2. */
/* MSVC port: intel processors don't need 4-byte alignment,
but are faster that way! */
#define MEM_ALIGNMENT 4
/* MEM_SIZE: the size of the heap memory. If the application will send
a lot of data that needs to be copied, this should be set high. */
//#define MEM_SIZE 10240
#if TARGET_LPC1768
#define MEM_SIZE 3000 //2000
///
#define MEM_POSITION __attribute((section("AHBSRAM0")))
/* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application
sends a lot of data out of ROM (or other static memory), this
should be set high. */
#define MEMP_NUM_PBUF 16
/* MEMP_NUM_RAW_PCB: the number of UDP protocol control blocks. One
per active RAW "connection". */
//#define MEMP_NUM_RAW_PCB 3
/* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
per active UDP "connection". */
#define MEMP_NUM_UDP_PCB 4
/* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP
connections. */
#define MEMP_NUM_TCP_PCB 3
/* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP
connections. */
#define MEMP_NUM_TCP_PCB_LISTEN 2//4
/* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP
segments. */
#define MEMP_NUM_TCP_SEG 16
/* MEMP_NUM_SYS_TIMEOUT: the number of simulateously active
timeouts. */
#define MEMP_NUM_SYS_TIMEOUT 12
/* The following four are used only with the sequential API and can be
set to 0 if the application only will use the raw API. */
/* MEMP_NUM_NETBUF: the number of struct netbufs. */
#define MEMP_NUM_NETBUF 0
/* MEMP_NUM_NETCONN: the number of struct netconns. */
#define MEMP_NUM_NETCONN 0
/* MEMP_NUM_TCPIP_MSG_*: the number of struct tcpip_msg, which is used
for sequential API communication and incoming packets. Used in
src/api/tcpip.c. */
#define MEMP_NUM_TCPIP_MSG_API 0
#define MEMP_NUM_TCPIP_MSG_INPKT 0
/* ---------- Pbuf options ---------- */
/* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */
#define PBUF_POOL_SIZE 8//16//100
/* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */
//#define PBUF_POOL_BUFSIZE 128
/* PBUF_LINK_HLEN: the number of bytes that should be allocated for a
link level header. */
//#define PBUF_LINK_HLEN 16
/** SYS_LIGHTWEIGHT_PROT
* define SYS_LIGHTWEIGHT_PROT in lwipopts.h if you want inter-task protection
* for certain critical regions during buffer allocation, deallocation and memory
* allocation and deallocation.
*/
#define SYS_LIGHTWEIGHT_PROT 0 //No sys here
/* ---------- TCP options ---------- */
#define LWIP_TCP 1
//#define TCP_TTL 255
/* Controls if TCP should queue segments that arrive out of
order. Define to 0 if your device is low on memory. */
#define TCP_QUEUE_OOSEQ 1
/* TCP Maximum segment size. */
//#define TCP_MSS 1024
#define TCP_MSS 536//1024//536//0x276
/* TCP sender buffer space (bytes). */
#define TCP_SND_BUF (3 * TCP_MSS) //2048
/* TCP sender buffer space (pbufs). This must be at least = 2 *
TCP_SND_BUF/TCP_MSS for things to work. */
#define TCP_SND_QUEUELEN (4 * (TCP_SND_BUF)/(TCP_MSS))
/* TCP writable space (bytes). This must be less than or equal
to TCP_SND_BUF. It is the amount of space which must be
available in the tcp snd_buf for select to return writable */
#define TCP_SNDLOWAT ((TCP_SND_BUF)/2)
/**
* TCP_WND: The size of a TCP window. This must be at least
* (2 * TCP_MSS) for things to work well
*/
/* TCP receive window. */
#define TCP_WND (4 * TCP_MSS) //8096
/* Maximum number of retransmissions of data segments. */
//#define TCP_MAXRTX 12
/* Maximum number of retransmissions of SYN segments. */
//#define TCP_SYNMAXRTX 4
#elif TARGET_LPC2368
#define MEM_POSITION __attribute((section("AHBSRAM1")))
/* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application
sends a lot of data out of ROM (or other static memory), this
should be set high. */
#define MEMP_NUM_PBUF 8
/* MEMP_NUM_RAW_PCB: the number of UDP protocol control blocks. One
per active RAW "connection". */
//#define MEMP_NUM_RAW_PCB 3
/* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
per active UDP "connection". */
#define MEMP_NUM_UDP_PCB 2
/* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP
connections. */
#define MEMP_NUM_TCP_PCB 2
/* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP
connections. */
#define MEMP_NUM_TCP_PCB_LISTEN 2//4
/* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP
segments. */
#define MEMP_NUM_TCP_SEG 8
/* MEMP_NUM_SYS_TIMEOUT: the number of simulateously active
timeouts. */
#define MEMP_NUM_SYS_TIMEOUT 12
/* The following four are used only with the sequential API and can be
set to 0 if the application only will use the raw API. */
/* MEMP_NUM_NETBUF: the number of struct netbufs. */
#define MEMP_NUM_NETBUF 0
/* MEMP_NUM_NETCONN: the number of struct netconns. */
#define MEMP_NUM_NETCONN 0
/* MEMP_NUM_TCPIP_MSG_*: the number of struct tcpip_msg, which is used
for sequential API communication and incoming packets. Used in
src/api/tcpip.c. */
#define MEMP_NUM_TCPIP_MSG_API 0
#define MEMP_NUM_TCPIP_MSG_INPKT 0
/* ---------- Pbuf options ---------- */
/* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */
#define PBUF_POOL_SIZE 8//16//100
/* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */
//#define PBUF_POOL_BUFSIZE 128
/* PBUF_LINK_HLEN: the number of bytes that should be allocated for a
link level header. */
//#define PBUF_LINK_HLEN 16
/** SYS_LIGHTWEIGHT_PROT
* define SYS_LIGHTWEIGHT_PROT in lwipopts.h if you want inter-task protection
* for certain critical regions during buffer allocation, deallocation and memory
* allocation and deallocation.
*/
#define SYS_LIGHTWEIGHT_PROT 0 //No sys here
/* ---------- TCP options ---------- */
#define LWIP_TCP 1
#define TCP_TTL 255
/* Controls if TCP should queue segments that arrive out of
order. Define to 0 if your device is low on memory. */
#define TCP_QUEUE_OOSEQ 0
/* TCP Maximum segment size. */
//#define TCP_MSS 1024
#define TCP_MSS 536//0x276//536//0x276
/* TCP sender buffer space (bytes). */
#define TCP_SND_BUF (3 * TCP_MSS)
/* TCP sender buffer space (pbufs). This must be at least = 2 *
TCP_SND_BUF/TCP_MSS for things to work. */
#define TCP_SND_QUEUELEN (2 * TCP_SND_BUF/TCP_MSS)//(4 * TCP_SND_BUF/TCP_MSS)
/* TCP writable space (bytes). This must be less than or equal
to TCP_SND_BUF. It is the amount of space which must be
available in the tcp snd_buf for select to return writable */
#define TCP_SNDLOWAT (TCP_SND_BUF/2)
/* TCP receive window. */
#define TCP_WND (3 * TCP_MSS) //8096
/* Maximum number of retransmissions of data segments. */
//#define TCP_MAXRTX 12
/* Maximum number of retransmissions of SYN segments. */
//#define TCP_SYNMAXRTX 4
#endif
/* ---------- ARP options ---------- */
#define LWIP_ARP (NET_ETH | NET_ZG2100)
#define ARP_TABLE_SIZE 4//10
#define ARP_QUEUEING 0
#define ETHARP_TRUST_IP_MAC 1
/* ---------- IP options ---------- */
/* Define IP_FORWARD to 1 if you wish to have the ability to forward
IP packets across network interfaces. If you are going to run lwIP
on a device with only one network interface, define this to 0. */
#define IP_FORWARD 0
/* IP reassembly and segmentation.These are orthogonal even
* if they both deal with IP fragments */
/*
#define IP_REASSEMBLY 1
#define IP_REASS_MAX_PBUFS 10
#define MEMP_NUM_REASSDATA 10
#define IP_FRAG 1
*/
/* ---------- ICMP options ---------- */
#define ICMP_TTL 255
/* ---------- IGMP options ---------- */
#define LWIP_IGMP (NET_ETH | NET_ZG2100)
/* ---------- DHCP options ---------- */
/* Define LWIP_DHCP to 1 if you want DHCP configuration of
interfaces. */
#define LWIP_DHCP (NET_ETH | NET_ZG2100)
/* 1 if you want to do an ARP check on the offered address
(recommended if using DHCP). */
#define DHCP_DOES_ARP_CHECK (LWIP_DHCP)
/* ---------- AUTOIP options ------- */
#define LWIP_AUTOIP 0
/* ---------- SNMP options ---------- */
/** @todo SNMP is experimental for now
@note UDP must be available for SNMP transport */
#ifndef LWIP_SNMP
#define LWIP_SNMP 0
#endif
#ifndef SNMP_PRIVATE_MIB
#define SNMP_PRIVATE_MIB 0
#endif
/* ---------- UDP options ---------- */
#define LWIP_UDP 1
#define UDP_TTL 255
/* ---------- DNS options ---------- */
#define LWIP_DNS 1
/* ---------- RAW options ---------- */
#define LWIP_RAW 0
#define RAW_TTL 255
/* ---------- Statistics options ---------- */
/* individual STATS options can be turned off by defining them to 0
* (e.g #define TCP_STATS 0). All of them are turned off if LWIP_STATS
* is 0
* */
#define LWIP_STATS 0
/* ---------- PPP options ---------- */
#define PPP_SUPPORT NET_PPP /* Set > 0 for PPP */
#if PPP_SUPPORT > 0
#define NUM_PPP 1 /* Max PPP sessions. */
/* Select modules to enable. Ideally these would be set in the makefile but
* we're limited by the command line length so you need to modify the settings
* in this file.
*/
#define PAP_SUPPORT 1 /* Set > 0 for PAP. */
#define CHAP_SUPPORT 1 /* Set > 0 for CHAP. */
#define MSCHAP_SUPPORT 0 /* Set > 0 for MSCHAP (NOT FUNCTIONAL!) */
#define CBCP_SUPPORT 0 /* Set > 0 for CBCP (NOT FUNCTIONAL!) */
#define CCP_SUPPORT 0 /* Set > 0 for CCP (NOT FUNCTIONAL!) */
#define VJ_SUPPORT 1 /* Set > 0 for VJ header compression. */
#define MD5_SUPPORT 1 /* Set > 0 for MD5 (see also CHAP) */
/*
* Timeouts.
*/
#define FSM_DEFTIMEOUT 6 /* Timeout time in seconds */
#define FSM_DEFMAXTERMREQS 2 /* Maximum Terminate-Request transmissions */
#define FSM_DEFMAXCONFREQS 10 /* Maximum Configure-Request transmissions */
#define FSM_DEFMAXNAKLOOPS 5 /* Maximum number of nak loops */
#define UPAP_DEFTIMEOUT 6 /* Timeout (seconds) for retransmitting req */
#define UPAP_DEFREQTIME 30 /* Time to wait for auth-req from peer */
#define CHAP_DEFTIMEOUT 6 /* Timeout time in seconds */
#define CHAP_DEFTRANSMITS 10 /* max # times to send challenge */
/* Interval in seconds between keepalive echo requests, 0 to disable. */
#if 1
#define LCP_ECHOINTERVAL 0
#else
#define LCP_ECHOINTERVAL 10
#endif
/* Number of unanswered echo requests before failure. */
#define LCP_MAXECHOFAILS 3
/* Max Xmit idle time (in jiffies) before resend flag char. */
#define PPP_MAXIDLEFLAG 0//Send it every time//100
/*
* Packet sizes
*
* Note - lcp shouldn't be allowed to negotiate stuff outside these
* limits. See lcp.h in the pppd directory.
* (XXX - these constants should simply be shared by lcp.c instead
* of living in lcp.h)
*/
#define PPP_MTU 1500 /* Default MTU (size of Info field) */
#if 0
#define PPP_MAXMTU 65535 - (PPP_HDRLEN + PPP_FCSLEN)
#else
#define PPP_MAXMTU 1500 /* Largest MTU we allow */
#endif
#define PPP_MINMTU 64
#define PPP_MRU 1500 /* default MRU = max length of info field */
#define PPP_MAXMRU 1500 /* Largest MRU we allow */
#define PPP_DEFMRU 296 /* Try for this */
#define PPP_MINMRU 128 /* No MRUs below this */
#define MAXNAMELEN 64 /* max length of hostname or name for auth */
#define MAXSECRETLEN 64 /* max length of password or secret */
#endif /* PPP_SUPPORT > 0 */
//C++ Compat
#define try vTry
#endif
#endif /* __LWIPOPTS_H__ */