File content as of revision 0:a6a169de725f:

// MESSAGE AUX_STATUS PACKING

#define MAVLINK_MSG_ID_AUX_STATUS 142

typedef struct __mavlink_aux_status_t 
{
    uint16_t load; ///< Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
    uint16_t i2c0_err_count; ///< Number of I2C errors since startup
    uint16_t i2c1_err_count; ///< Number of I2C errors since startup
    uint16_t spi0_err_count; ///< Number of I2C errors since startup
    uint16_t spi1_err_count; ///< Number of I2C errors since startup
    uint16_t uart_total_err_count; ///< Number of I2C errors since startup

} mavlink_aux_status_t;



/**
 * @brief Pack a aux_status message
 * @param system_id ID of this system
 * @param component_id ID of this component (e.g. 200 for IMU)
 * @param msg The MAVLink message to compress the data into
 *
 * @param load Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
 * @param i2c0_err_count Number of I2C errors since startup
 * @param i2c1_err_count Number of I2C errors since startup
 * @param spi0_err_count Number of I2C errors since startup
 * @param spi1_err_count Number of I2C errors since startup
 * @param uart_total_err_count Number of I2C errors since startup
 * @return length of the message in bytes (excluding serial stream start sign)
 */
static inline uint16_t mavlink_msg_aux_status_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, uint16_t load, uint16_t i2c0_err_count, uint16_t i2c1_err_count, uint16_t spi0_err_count, uint16_t spi1_err_count, uint16_t uart_total_err_count)
{
    uint16_t i = 0;
    msg->msgid = MAVLINK_MSG_ID_AUX_STATUS;

    i += put_uint16_t_by_index(load, i, msg->payload); // Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
    i += put_uint16_t_by_index(i2c0_err_count, i, msg->payload); // Number of I2C errors since startup
    i += put_uint16_t_by_index(i2c1_err_count, i, msg->payload); // Number of I2C errors since startup
    i += put_uint16_t_by_index(spi0_err_count, i, msg->payload); // Number of I2C errors since startup
    i += put_uint16_t_by_index(spi1_err_count, i, msg->payload); // Number of I2C errors since startup
    i += put_uint16_t_by_index(uart_total_err_count, i, msg->payload); // Number of I2C errors since startup

    return mavlink_finalize_message(msg, system_id, component_id, i);
}

/**
 * @brief Pack a aux_status message
 * @param system_id ID of this system
 * @param component_id ID of this component (e.g. 200 for IMU)
 * @param chan The MAVLink channel this message was sent over
 * @param msg The MAVLink message to compress the data into
 * @param load Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
 * @param i2c0_err_count Number of I2C errors since startup
 * @param i2c1_err_count Number of I2C errors since startup
 * @param spi0_err_count Number of I2C errors since startup
 * @param spi1_err_count Number of I2C errors since startup
 * @param uart_total_err_count Number of I2C errors since startup
 * @return length of the message in bytes (excluding serial stream start sign)
 */
static inline uint16_t mavlink_msg_aux_status_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, uint16_t load, uint16_t i2c0_err_count, uint16_t i2c1_err_count, uint16_t spi0_err_count, uint16_t spi1_err_count, uint16_t uart_total_err_count)
{
    uint16_t i = 0;
    msg->msgid = MAVLINK_MSG_ID_AUX_STATUS;

    i += put_uint16_t_by_index(load, i, msg->payload); // Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
    i += put_uint16_t_by_index(i2c0_err_count, i, msg->payload); // Number of I2C errors since startup
    i += put_uint16_t_by_index(i2c1_err_count, i, msg->payload); // Number of I2C errors since startup
    i += put_uint16_t_by_index(spi0_err_count, i, msg->payload); // Number of I2C errors since startup
    i += put_uint16_t_by_index(spi1_err_count, i, msg->payload); // Number of I2C errors since startup
    i += put_uint16_t_by_index(uart_total_err_count, i, msg->payload); // Number of I2C errors since startup

    return mavlink_finalize_message_chan(msg, system_id, component_id, chan, i);
}

/**
 * @brief Encode a aux_status struct into a message
 *
 * @param system_id ID of this system
 * @param component_id ID of this component (e.g. 200 for IMU)
 * @param msg The MAVLink message to compress the data into
 * @param aux_status C-struct to read the message contents from
 */
static inline uint16_t mavlink_msg_aux_status_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_aux_status_t* aux_status)
{
    return mavlink_msg_aux_status_pack(system_id, component_id, msg, aux_status->load, aux_status->i2c0_err_count, aux_status->i2c1_err_count, aux_status->spi0_err_count, aux_status->spi1_err_count, aux_status->uart_total_err_count);
}

/**
 * @brief Send a aux_status message
 * @param chan MAVLink channel to send the message
 *
 * @param load Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
 * @param i2c0_err_count Number of I2C errors since startup
 * @param i2c1_err_count Number of I2C errors since startup
 * @param spi0_err_count Number of I2C errors since startup
 * @param spi1_err_count Number of I2C errors since startup
 * @param uart_total_err_count Number of I2C errors since startup
 */
#ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS

static inline void mavlink_msg_aux_status_send(mavlink_channel_t chan, uint16_t load, uint16_t i2c0_err_count, uint16_t i2c1_err_count, uint16_t spi0_err_count, uint16_t spi1_err_count, uint16_t uart_total_err_count)
{
    mavlink_message_t msg;
    mavlink_msg_aux_status_pack_chan(mavlink_system.sysid, mavlink_system.compid, chan, &msg, load, i2c0_err_count, i2c1_err_count, spi0_err_count, spi1_err_count, uart_total_err_count);
    mavlink_send_uart(chan, &msg);
}

#endif
// MESSAGE AUX_STATUS UNPACKING

/**
 * @brief Get field load from aux_status message
 *
 * @return Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
 */
static inline uint16_t mavlink_msg_aux_status_get_load(const mavlink_message_t* msg)
{
    generic_16bit r;
    r.b[1] = (msg->payload)[0];
    r.b[0] = (msg->payload)[1];
    return (uint16_t)r.s;
}

/**
 * @brief Get field i2c0_err_count from aux_status message
 *
 * @return Number of I2C errors since startup
 */
static inline uint16_t mavlink_msg_aux_status_get_i2c0_err_count(const mavlink_message_t* msg)
{
    generic_16bit r;
    r.b[1] = (msg->payload+sizeof(uint16_t))[0];
    r.b[0] = (msg->payload+sizeof(uint16_t))[1];
    return (uint16_t)r.s;
}

/**
 * @brief Get field i2c1_err_count from aux_status message
 *
 * @return Number of I2C errors since startup
 */
static inline uint16_t mavlink_msg_aux_status_get_i2c1_err_count(const mavlink_message_t* msg)
{
    generic_16bit r;
    r.b[1] = (msg->payload+sizeof(uint16_t)+sizeof(uint16_t))[0];
    r.b[0] = (msg->payload+sizeof(uint16_t)+sizeof(uint16_t))[1];
    return (uint16_t)r.s;
}

/**
 * @brief Get field spi0_err_count from aux_status message
 *
 * @return Number of I2C errors since startup
 */
static inline uint16_t mavlink_msg_aux_status_get_spi0_err_count(const mavlink_message_t* msg)
{
    generic_16bit r;
    r.b[1] = (msg->payload+sizeof(uint16_t)+sizeof(uint16_t)+sizeof(uint16_t))[0];
    r.b[0] = (msg->payload+sizeof(uint16_t)+sizeof(uint16_t)+sizeof(uint16_t))[1];
    return (uint16_t)r.s;
}

/**
 * @brief Get field spi1_err_count from aux_status message
 *
 * @return Number of I2C errors since startup
 */
static inline uint16_t mavlink_msg_aux_status_get_spi1_err_count(const mavlink_message_t* msg)
{
    generic_16bit r;
    r.b[1] = (msg->payload+sizeof(uint16_t)+sizeof(uint16_t)+sizeof(uint16_t)+sizeof(uint16_t))[0];
    r.b[0] = (msg->payload+sizeof(uint16_t)+sizeof(uint16_t)+sizeof(uint16_t)+sizeof(uint16_t))[1];
    return (uint16_t)r.s;
}

/**
 * @brief Get field uart_total_err_count from aux_status message
 *
 * @return Number of I2C errors since startup
 */
static inline uint16_t mavlink_msg_aux_status_get_uart_total_err_count(const mavlink_message_t* msg)
{
    generic_16bit r;
    r.b[1] = (msg->payload+sizeof(uint16_t)+sizeof(uint16_t)+sizeof(uint16_t)+sizeof(uint16_t)+sizeof(uint16_t))[0];
    r.b[0] = (msg->payload+sizeof(uint16_t)+sizeof(uint16_t)+sizeof(uint16_t)+sizeof(uint16_t)+sizeof(uint16_t))[1];
    return (uint16_t)r.s;
}

/**
 * @brief Decode a aux_status message into a struct
 *
 * @param msg The message to decode
 * @param aux_status C-struct to decode the message contents into
 */
static inline void mavlink_msg_aux_status_decode(const mavlink_message_t* msg, mavlink_aux_status_t* aux_status)
{
    aux_status->load = mavlink_msg_aux_status_get_load(msg);
    aux_status->i2c0_err_count = mavlink_msg_aux_status_get_i2c0_err_count(msg);
    aux_status->i2c1_err_count = mavlink_msg_aux_status_get_i2c1_err_count(msg);
    aux_status->spi0_err_count = mavlink_msg_aux_status_get_spi0_err_count(msg);
    aux_status->spi1_err_count = mavlink_msg_aux_status_get_spi1_err_count(msg);
    aux_status->uart_total_err_count = mavlink_msg_aux_status_get_uart_total_err_count(msg);
}