Diff: main.cpp

Revision:

2:298924eb2b41

Parent:

1:91c435a6966b

Child:

3:b2acafb06072

diff -r 91c435a6966b -r 298924eb2b41 main.cpp
--- a/main.cpp	Sat Aug 15 13:00:15 2015 +0000
+++ b/main.cpp	Sat Aug 15 14:12:27 2015 +0000
@@ -65,38 +65,38 @@
     //rxfifoalmostfull
     writereg(RF22_REG_7E_RX_FIFO_CONTROL,20);
     //Packet-engine registers
-    writereg(RF22_REG_30_DATA_ACCESS_CONTROL,0x8E);    //RF22_REG_30_DATA_ACCESS_CONTROL, RF22_ENPACRX | RF22_ENPACTX | RF22_ENCRC | RF22_CRC_CRC_16_IBM
-    //&0x77 = diasable packet rx-tx handling
-    //how does it works?? what values to be used
+    writereg(RF22_REG_30_DATA_ACCESS_CONTROL,0x00);    //RF22_REG_30_DATA_ACCESS_CONTROL, RF22_ENPACRX | RF22_ENPACTX | RF22_ENCRC | RF22_CRC_CRC_16_IBM
+    //0x00
     
     
-    writereg(RF22_REG_32_HEADER_CONTROL1,0x88);    //RF22_REG_32_HEADER_CONTROL1, RF22_BCEN_HEADER3 | RF22_HDCH_HEADER3  //not reqiured for tx
-    writereg(RF22_REG_33_HEADER_CONTROL2,0x42);    //RF22_REG_33_HEADER_CONTROL2, RF22_HDLEN_4 | RF22_SYNCLEN_2
-    //why 0x42
-    writereg(RF22_REG_34_PREAMBLE_LENGTH,8);       //RF22_REG_34_PREAMBLE_LENGTH, nibbles); preamble length = 8;
+    //writereg(RF22_REG_32_HEADER_CONTROL1,0x88);    //RF22_REG_32_HEADER_CONTROL1, RF22_BCEN_HEADER3 | RF22_HDCH_HEADER3  //not reqiured for tx
+    writereg(RF22_REG_33_HEADER_CONTROL2,0x08);    //RF22_REG_33_HEADER_CONTROL2, RF22_HDLEN_4 | RF22_SYNCLEN_2
+    //why 0x42 //or 0x00??
+    
+    writereg(RF22_REG_34_PREAMBLE_LENGTH,0x00);       //RF22_REG_34_PREAMBLE_LENGTH, nibbles); preamble length = 8;
     //why is preamble used??
     
-    writereg(RF22_REG_36_SYNC_WORD3,0x2D);    //syncword3=2D
+    //writereg(RF22_REG_36_SYNC_WORD3,0x2D);    //syncword3=2D
     //why??
     
-    writereg(RF22_REG_37_SYNC_WORD2,0xD4);    //syncword2=D4
+    //writereg(RF22_REG_37_SYNC_WORD2,0xD4);    //syncword2=D4
     //why??
     
-    writereg(RF22_REG_3F_CHECK_HEADER3,0);    //RF22_REG_3F_CHECK_HEADER3, RF22_DEFAULT_NODE_ADDRESS
+    //writereg(RF22_REG_3F_CHECK_HEADER3,0);    //RF22_REG_3F_CHECK_HEADER3, RF22_DEFAULT_NODE_ADDRESS
     
     
     //why all these headers
-    writereg(RF22_REG_3A_TRANSMIT_HEADER3,0xab);    //header_to
-    writereg(RF22_REG_3B_TRANSMIT_HEADER2,0xbc);    //header_from 
-    writereg(RF22_REG_3C_TRANSMIT_HEADER1,0xcd);    //header_ids
-    writereg(RF22_REG_3D_TRANSMIT_HEADER0,0xde);    //header_flags
-    writereg(RF22_REG_3F_CHECK_HEADER3,0xab);   
-    writereg(RF22_REG_40_CHECK_HEADER2,0xbc);   
-    writereg(RF22_REG_41_CHECK_HEADER1,0xcd);   
-    writereg(RF22_REG_42_CHECK_HEADER0,0xde);
+    //writereg(RF22_REG_3A_TRANSMIT_HEADER3,0xab);    //header_to
+    //writereg(RF22_REG_3B_TRANSMIT_HEADER2,0xbc);    //header_from 
+    //writereg(RF22_REG_3C_TRANSMIT_HEADER1,0xcd);    //header_ids
+    //writereg(RF22_REG_3D_TRANSMIT_HEADER0,0xde);    //header_flags
+    //writereg(RF22_REG_3F_CHECK_HEADER3,0xab);   
+    //writereg(RF22_REG_40_CHECK_HEADER2,0xbc);   
+    //writereg(RF22_REG_41_CHECK_HEADER1,0xcd);   
+    //writereg(RF22_REG_42_CHECK_HEADER0,0xde);
     
     //RSSI threshold for clear channel indicator //rx
-    writereg(RF22_REG_27_RSSI_THRESHOLD,0xA5);         //55 for -80dBm, 2D for -100dBm, 7D for -60dBm, A5 for -40dBm, CD for -20 dBm
+    //writereg(RF22_REG_27_RSSI_THRESHOLD,0xA5);         //55 for -80dBm, 2D for -100dBm, 7D for -60dBm, A5 for -40dBm, CD for -20 dBm
     
     writereg(RF22_REG_0B_GPIO_CONFIGURATION0,0x15); // TX state                        ??
     writereg(RF22_REG_0C_GPIO_CONFIGURATION1,0x12); // RX state                        ??
@@ -130,23 +130,23 @@
     writereg(RF22_REG_58,0x80);
     writereg(RF22_REG_69_AGC_OVERRIDE1,0x60);
     
-    //check...
+    //check...//also depends on 0x70[5]
     writereg(RF22_REG_6E_TX_DATA_RATE1,0x09);//TX at 0.123kbps=:6E=0x01; 6F=0x02 
-    writereg(RF22_REG_6F_TX_DATA_RATE0,0xd5);//TX at 1.2kbps: 6E=0x09; 6F=0xd5
-    
+    writereg(RF22_REG_6F_TX_DATA_RATE0,0xd5);//TX at 1.2kbps: 6E=0x09; 6F=0xd5    //Formula:  tx_datarate*(2^21)/10^6
+    //
     
     writereg(RF22_REG_70_MODULATION_CONTROL1,0x2c);
     writereg(RF22_REG_71_MODULATION_CONTROL2,0x21);//ook = 0x21 //fsk = 0x22
     
-    writereg(RF22_REG_72_FREQUENCY_DEVIATION,0x50);
+    //writereg(RF22_REG_72_FREQUENCY_DEVIATION,0x50);
     //required for OOK???
     
     //set tx power
-    writereg(RF22_REG_6D_TX_POWER,0x06);    //20dbm
-    //why 0x06?? 0x07 is for max
+    writereg(RF22_REG_6D_TX_POWER,0x07);    //20dbm
+    //why 0x06?? 0x07 is for max//is the previous bits required?
     
     //writereg(RF22_REG_6D_TX_POWER,0x00);    //-1dbm
-    writereg(RF22_REG_3E_PACKET_LENGTH,TX_DATA); //packet length
+    //writereg(RF22_REG_3E_PACKET_LENGTH,TX_DATA); //packet length
     //packet length not required
          
 }