#include <Max4146x.h>

Inherits MAX4146X< max41460_reg_map_t >.

Public Types
enum	xoclkdelay_t
	Register Configuration. More...
enum	xoclkdiv_t
	Register Configuration. More...
enum	fskshape_t
	Register Configuration. More...
enum	sync_t
	Register Configuration. More...
enum	modmode_t
	Register Configuration. More...
enum	clkout_delay_t
	Register Configuration. More...
enum	bclk_postdiv_t
	Register Configuration. More...
enum	pwdn_mode_t
	Register Configuration. More...
enum	pa_boost_t
	Register Configuration. More...
enum	papwr_t
	Register Configuration. More...
enum	pacap_t
	Register Configuration. More...
enum	cplin_t
	Register Configuration. More...
enum	fracmode_t
	Register Configuration. More...
enum	lomode_t
	Register Configuration. More...
enum	cpval_t
	Register Configuration. More...
enum	i2c_txen1_t
	Register Configuration. More...
enum	spi_txen1_t
	Register Configuration. More...
enum	fourwire1_t
	Register Configuration. More...
enum	i2c_txen2_t
	Register Configuration. More...
enum	spi_txen2_t
	Register Configuration. More...
enum	fourwire2_t
	Register Configuration. More...
enum	pktlen_mode_t
	Register Configuration. More...
enum	softreset_t
	Register Configuration. More...
enum	operation_mode_t
	Operation state of the rf transmitter. More...
Public Member Functions
int	set_xoclkdelay (xoclkdelay_t delay)
	Set start delay before enabling XO clock to digital block.
int	get_xoclkdelay (xoclkdelay_t *delay)
	Get start delay before enabling XO clock to digital block.
int	set_xoclkdiv (xoclkdiv_t div)
	Set XO clock division ratio for digital block.
int	get_xoclkdiv (xoclkdiv_t *div)
	Get XO clock division ratio for digital block.
int	set_fskshape (fskshape_t shape)
	Sets the state of FSK Gaussian Shaping.
int	get_fskshape (fskshape_t *shape)
	Gets the state of FSK Gaussian Shaping.
int	set_sync (sync_t state)
	Sets the state of clock pin.
int	get_sync (sync_t *state)
	Gets the state of clock pin.
int	set_modmode (modmode_t mode)
	Sets modulator mode to ASK or FSK.
int	get_modmode (modmode_t *mode)
	Gets modulator mode.
int	set_clkout_delay (clkout_delay_t delay)
	Sets clkout delay.
int	get_clkout_delay (clkout_delay_t *delay)
	Gets clkout delay.
int	set_bclk_postdiv (bclk_postdiv_t div)
	Sets baud clock post-divider.
int	get_bclk_postdiv (bclk_postdiv_t *div)
	Gets baud clock post-divider.
int	set_pwdn_mode (pwdn_mode_t pwdn_mode)
	Sets power down mode.
int	get_pwdn_mode (pwdn_mode_t *pwdn_mode)
	Gets power down mode.
int	set_pa_boost (pa_boost_t pa_boost)
	enable/disable boost mode
int	get_pa_boost (pa_boost_t *pa_boost)
	Gets boost mode.
int	set_papwr (papwr_t papwr)
	set PA output power by enabling parallel drivers
int	get_papwr (papwr_t *papwr)
	Gets PA output power.
int	set_pacap (pacap_t pacap)
	set shunt capacitance value
int	get_pacap (pacap_t *pacap)
	Gets shunt capacitance value.
int	set_cplin (cplin_t cplin)
	set level of charge pump offset current
int	get_cplin (cplin_t *cplin)
	Gets level of charge pump offset current.
int	set_fracmode (fracmode_t fracmode)
	set PLL mode
int	get_fracmode (fracmode_t *fracmode)
	Gets PLL mode.
int	set_lodiv (lodiv_t lodiv)
	set divider of LC VCO
int	get_lodiv (lodiv_t *lodiv)
	Gets divider of LC VCO.
int	set_lomode (lomode_t lomode)
	set LO generation
int	get_lomode (lomode_t *lomode)
	Gets LO generation.
int	set_cpval (cpval_t cpval)
	set charge pump current
int	get_cpval (cpval_t *cpval)
	Gets charge pump current.
int	set_pktlen_mode (pktlen_mode_t pktlen_mode)
	set packet length
int	get_pktlen_mode (pktlen_mode_t *pktlen_mode)
	Gets packet length.
int	set_softreset (softreset_t softreset)
	set softreset bit
int	get_fifo_flags (uint8_t *fifo_flags)
	get fifo flags (I2C6) Read only
int	get_pktcomplete (uint8_t *pktcomplete)
	get pktcomplete bit field flags (I2C4) Read only
int	get_tx_pktlen (uint16_t *pktlen)
	get packet length of transmitted packet
int	read_register (uint8_t reg, uint8_t *value, uint8_t len)
	Read from a register.
int	write_register (uint8_t reg, const uint8_t *value, uint8_t len)
	Write to a register.
int	initial_programming (void)
	Initial programming steps after power on or soft reset.
int	set_bclk_prediv (uint8_t prediv)
	Set Baud clock predivision ratio.
int	get_bclk_prediv (uint8_t *prediv)
	Gets Baud clock predivision ratio.
int	set_tstep (uint8_t tstep)
	Controls GFSK shaping.
int	get_tstep (uint8_t *tstep)
	Gets tstep.
int	set_frequency (uint32_t freq)
	Set PLL frequency.
int	get_frequency (uint32_t *freq)
	Gets PLL frequency.
int	set_deltaf (uint8_t deltaf)
	Set frequency deviation from the space frequency for the mark frequency.
int	get_deltaf (uint8_t *deltaf)
	Get frequency deviation from the space frequency for the mark frequency.
int	set_deltaf_shape (uint8_t deltaf_shape)
	Set frequency deviation from the space frequency for the mark frequency.
int	get_deltaf_shape (uint8_t *deltaf_shape)
	Gets frequency deviation from the space frequency for the mark frequency.
int	set_i2c_pktlen (uint16_t pktlen)
	Set Packet Length for I2C communication.
int	get_i2c_pktlen (uint16_t *pktlen)
	Gets Packet Length for I2C communication.
int	adjust_baudrate (float rate)
	Adjust baud rate.
float	get_baudrate ()
	Gets baud rate.
int	adjust_manchester_bitrate (char rate)
	Adjust Manchester Bitrate.
char	get_manchester_bitrate ()
	Get Manchester Bitrate.
int	set_crystal_frequency (float freq)
	Configures the crystal frequency of the chip (Fxtal)
float	get_crystal_frequency ()
	Get the crystal frequency of the chip (Fxtal)
int	set_center_frequency (float freq)
	Adjust center/carrier frequency of the chip.
float	get_center_frequency ()
	Gets center/carrier frequency of the chip.
int	adjust_frequency_deviation (float deviation)
	set the FSK deviation values (Delta_f)
int	send_data (uint8_t *data, uint32_t length)
	Send data for selected Preset/I2C/SPI mode.

Detailed Description

MAX41460 Device Class.

Hold configurations for the MAX41460

Definition at line 1166 of file Max4146x.h.

Member Enumeration Documentation

enum bclk_postdiv_t [inherited]

Register Configuration.

Register : CFG2(0x01)
Bit Fields : [2:0]
Default : 0x1
Description : Baud clock post-divider setting.

Definition at line 336 of file Max4146x.h.

enum clkout_delay_t [inherited]

Register Configuration.

Register : CFG2(0x01)
Bit Fields : [7:6]
Default : 0x2
Description : Selects the delay when CLKOUT starts toggling upon exiting SHUTDOWN mode, in divided XO clock cycles

Definition at line 298 of file Max4146x.h.

enum cplin_t [inherited]

Register Configuration.

Register : PLL1(0x08)
Bit Fields : [7:6] -Default : 0x1
Description : Sets the level of charge pump offset current for fractional N mode to improve close in phase noise. Set to 'DISABLED' for integer N mode.

Definition at line 547 of file Max4146x.h.

enum cpval_t [inherited]

Register Configuration.

Register : PLL2(0x09)
Bit Fields : [1:0]
Default : 0x0
Description : Sets Charge Pump Current in microAmpere

Definition at line 681 of file Max4146x.h.

enum fourwire1_t [inherited]

Register Configuration.

Register : CFG6(0x0A)
Bit Fields : [0]
Default : 0b0
Description : Four wire readback on CLKOUT pin mode.

Definition at line 745 of file Max4146x.h.

enum fourwire2_t [inherited]

Register Configuration.

Register : CFG7(0x10)
Bit Fields : [0]
Default : 0b0
Description : Four wire readback on CLKOUT pin mode. Aliased address for FOURWIRE1

Definition at line 790 of file Max4146x.h.

enum fracmode_t [inherited]

Register Configuration.

Register : PLL1(0x08)
Bit Fields : [5]
Default : 0b1
Description : Sets PLL between fractional-N and integer-N mode.

Definition at line 583 of file Max4146x.h.

enum fskshape_t [inherited]

Register Configuration.

Register : CFG1(0x00)
Bit Fields : [2]
Default : 0b0
Description : Sets the state of FSK Gaussian Shaping

Definition at line 199 of file Max4146x.h.

enum i2c_txen1_t [inherited]

Register Configuration.

Register : CFG6(0x0A)
Bit Fields : [2]
Default : 0b0
Description : Enables DATA transmission in I2C mode. Aliased address for I2C_TXEN1.

Definition at line 715 of file Max4146x.h.

enum i2c_txen2_t [inherited]

Register Configuration.

Register : CFG7(0x10)
Bit Fields : [2]
Default : 0b0
Description : Enables DATA transmission in I2C mode. Aliased address for I2C_TXEN1

Definition at line 760 of file Max4146x.h.

enum lomode_t [inherited]

Register Configuration.

Register : PLL1(0x08)
Bit Fields : [0]
Default : 0b0
Description : Sets LO generation. For lower power, choose LOWCURRENT. For higher performance, choose LOWNOISE

Definition at line 648 of file Max4146x.h.

enum modmode_t [inherited]

Register Configuration.

Register : CFG1(0x00)
Bit Fields : [0]
Default : 0b0
Description : Configures modulator mode

Definition at line 264 of file Max4146x.h.

enum operation_mode_t [inherited]

Operation state of the rf transmitter.

Default : 0b0
Description : Places DUT into software reset.

Definition at line 866 of file Max4146x.h.

enum pa_boost_t [inherited]

Register Configuration.

Register : SHDN(0x05)
Bit Fields : [0]
Default : 0x0
Description : Enables a boost in PA output power for frequencies above 850MHz. This requires a different PA match compared to normal operation.

Definition at line 412 of file Max4146x.h.

enum pacap_t [inherited]

Register Configuration.

Register : PA2(0x07)
Bit Fields : [4:0]
Default : 0x00
Description : Controls shunt capacitance on PA output in fF.

Definition at line 483 of file Max4146x.h.

enum papwr_t [inherited]

Register Configuration.

Register : PA1(0x06)
Bit Fields : [2:0]
Default : 0x0
Description : Controls the PA output power by enabling parallel drivers.

Definition at line 444 of file Max4146x.h.

enum pktlen_mode_t [inherited]

Register Configuration.

Register : I2C1(0x11)
Bit Fields : [7]
Default : 0b0
Description : Packet Length Mode

Definition at line 807 of file Max4146x.h.

enum pwdn_mode_t [inherited]

Register Configuration.

Register : CFG4(0x03)
Bit Fields : [1:0]
Default : 0x0
Description : Power Down Mode Select.

Definition at line 374 of file Max4146x.h.

enum softreset_t [inherited]

Register Configuration.

Register : CFG8(0x17)
Bit Fields : [0]
Default : 0b0
Description : Places DUT into software reset.

Definition at line 845 of file Max4146x.h.

enum spi_txen1_t [inherited]

Register Configuration.

Register : CFG6(0x0A)
Bit Fields : [1]
Default : 0b0
Description : Transmission enable.

Definition at line 730 of file Max4146x.h.

enum spi_txen2_t [inherited]

Register Configuration.

Register : CFG7(0x10)
Bit Fields : [1]
Default : 0b0
Description : Transmission enable.

Definition at line 775 of file Max4146x.h.

enum sync_t [inherited]

Register Configuration.

Register : CFG1(0x00)
Bit Fields : [1]
Default : 0b0
Description : Controls if clock output acts as an input. When an input, it will sample the DATA pin.

Definition at line 232 of file Max4146x.h.

enum xoclkdelay_t [inherited]

Register Configuration.

Register : CFG1(0x00)
Bit Fields : [7:6]
Default : 0x2
Description : Start delay before enabling XO clock to digital block

Definition at line 130 of file Max4146x.h.

enum xoclkdiv_t [inherited]

Register Configuration.

-Register : CFG1(0x00)

Bit Fields : [5:4]
Default : 0x2
Description : XO clock division ratio for digital block

Definition at line 164 of file Max4146x.h.

Member Function Documentation

int adjust_baudrate ( float rate ) [inherited]

Adjust baud rate.

Parameters:

[in] baud_rate preferred baud rate

Returns:: 0 on success, negative error code on failure.

It changes only the values of BCLK_PREDIV and BCLK_POSTDIV Baud_rate = f_clk/((1+BCLK_PREDIV)x2^(1+BCLK_POSTDIV)) where f_clk = f_xtal/XOCLKDIV_ratio Note that to maintain the internal 3.2MHz time base, XOCLKDIV[1:0] (register CFG1, 0x00, bit 4) must be programmed, based on the crystal frequency

int adjust_frequency_deviation ( float deviation ) [inherited]

set the FSK deviation values (Delta_f)

Parameters:

[in] deviation deviation value in in kHz baud rate

Returns:: 0 on success, negative error code on failure.

The mark frequency is defined by the space frequency plus a frequency deviation. If frequency shaping is disabled by setting FSKSHAPE = 0 (register CFG1, bit 2), the frequency deviation is defined by DELTAF[6:0] (register PLL6, bits 6:0). DELTAF[6 : 0] = (Delta_f * 8192)f_xtal If frequency shaping is enabled by setting FSKSHAPE = 1 (register CFG1, bit 2), the frequency deviation is defined by DETLAF_SHAPE[3:0] (register PLL7, bits 3:0). DELTAF_SHAPE[3 : 0] = (Delta_f * 8192)/(f_xtal * 10)

int adjust_manchester_bitrate ( char rate ) [inherited]

Adjust Manchester Bitrate.

Parameters:

[in] data_rate preferred data rate in (1-50)kbps

Returns:: 0 on success, negative error code on failure.

float get_baudrate ( ) [inherited]

Gets baud rate.

Returns:: baud rate.

int get_bclk_postdiv ( bclk_postdiv_t * div ) [inherited]

Gets baud clock post-divider.

Parameters:

[in] div divider value

Returns:: 0 on success, negative error code on failure.

int get_bclk_prediv ( uint8_t * prediv ) [inherited]

Gets Baud clock predivision ratio.

Parameters:

[in] prediv values between 3 and 255

Returns:: 0 on success, negative error code on failure.

float get_center_frequency ( ) [inherited]

Gets center/carrier frequency of the chip.

Returns:: center/carrier frequency value between 250 MHz and 950 MHz

int get_clkout_delay ( clkout_delay_t * delay ) [inherited]

Gets clkout delay.

Parameters:

[in] delay delay cycles

Returns:: 0 on success, negative error code on failure.

int get_cplin ( cplin_t * cplin ) [inherited]

Gets level of charge pump offset current.

Parameters:

[in] cplin percentage of charge pump current

Returns:: 0 on success, negative error code on failure.

int get_cpval ( cpval_t * cpval ) [inherited]

Gets charge pump current.

Parameters:

[in] cpval current value

Returns:: 0 on success, negative error code on failure.

float get_crystal_frequency ( ) [inherited]

Get the crystal frequency of the chip (Fxtal)

Returns:: crystal frequency values between 12.8 MHz and 19.2 MHz

int get_deltaf ( uint8_t * deltaf ) [inherited]

Get frequency deviation from the space frequency for the mark frequency.

Parameters:

[in] deltaf frequency deviation value

Returns:: 0 on success, negative error code on failure.

fDELTA = DELTAF[6:0]* fXTAL/8192

int get_deltaf_shape ( uint8_t * deltaf_shape ) [inherited]

Gets frequency deviation from the space frequency for the mark frequency.

Parameters:

[in] deltaf_shape frequency deviation value

Returns:: 0 on success, negative error code on failure.

fDELTA = DELTAF_SHAPE[3:0]* fXTAL/81920

int get_fifo_flags ( uint8_t * fifo_flags ) [inherited]

get fifo flags (I2C6) Read only

Parameters:

[in] fifo_flags 8-bit fifo flags

Returns:: 0 on success, negative error code on failure.

int get_fracmode ( fracmode_t * fracmode ) [inherited]

Gets PLL mode.

Parameters:

[in] fracmode Integer N/Fractional N mode

Returns:: 0 on success, negative error code on failure.

int get_frequency ( uint32_t * freq ) [inherited]

Gets PLL frequency.

Parameters:

[in] freq FREQ value to PLL between 0x00 and 0xFFFFFF

Returns:: 0 on success, negative error code on failure.

LO frequency = FREQ<23:0>/2^16*fXTAL

int get_fskshape ( fskshape_t * shape ) [inherited]

Gets the state of FSK Gaussian Shaping.

Parameters:

[in] shape enable/disable fskshaping

Returns:: 0 on success, negative error code on failure.

int get_i2c_pktlen ( uint16_t * pktlen ) [inherited]

Gets Packet Length for I2C communication.

Parameters:

[in] pktlen values between 0x00 and 0x7FF

Returns:: 0 on success, negative error code on failure.

int get_lodiv ( lodiv_t * lodiv ) [inherited]

Gets divider of LC VCO.

Parameters:

[in] lodiv divider value

Returns:: 0 on success, negative error code on failure.

int get_lomode ( lomode_t * lomode ) [inherited]

Gets LO generation.

Parameters:

[in] lomode selection of mode

Returns:: 0 on success, negative error code on failure.

char get_manchester_bitrate ( ) [inherited]

Get Manchester Bitrate.

Returns:: data rate in (1-50)kbps

int get_modmode ( modmode_t * mode ) [inherited]

Gets modulator mode.

Parameters:

[in] mode ASK or FSK

Returns:: 0 on success, negative error code on failure.

int get_pa_boost ( pa_boost_t * pa_boost ) [inherited]

Gets boost mode.

Parameters:

[in] pa_boost power amplifier output mode

Returns:: 0 on success, negative error code on failure.

int get_pacap ( pacap_t * pacap ) [inherited]

Gets shunt capacitance value.

Parameters:

[in] pacap shunt capacitance value

Returns:: 0 on success, negative error code on failure.

int get_papwr ( papwr_t * papwr ) [inherited]

Gets PA output power.

Parameters:

[in] papwr number of parallel drivers

Returns:: 0 on success, negative error code on failure.

int get_pktcomplete ( uint8_t * pktcomplete ) [inherited]

get pktcomplete bit field flags (I2C4) Read only

Parameters:

[in] pktcomplete 0x0: Packet transmission is not completed 0x1: Packet transmission is completed

Returns:: 0 on success, negative error code on failure.

int get_pktlen_mode ( pktlen_mode_t * pktlen_mode ) [inherited]

Gets packet length.

Parameters:

[in] pktlen_mode packet length mode

Returns:: 0 on success, negative error code on failure.

int get_pwdn_mode ( pwdn_mode_t * pwdn_mode ) [inherited]

Gets power down mode.

Parameters:

[in] pwdn_mode power down mode

Returns:: 0 on success, negative error code on failure.

int get_sync ( sync_t * state ) [inherited]

Gets the state of clock pin.

Parameters:

[in] state pin state async/sync

Returns:: 0 on success, negative error code on failure.

int get_tstep ( uint8_t * tstep ) [inherited]

Gets tstep.

Parameters:

[in] tstep values between 0 and 31

Returns:: 0 on success, negative error code on failure.

int get_tx_pktlen ( uint16_t * pktlen ) [inherited]

get packet length of transmitted packet

Parameters:

[in] pktlen Provides status information of bits transmitted for the current packet

Returns:: 0 on success, negative error code on failure.

int get_xoclkdelay ( xoclkdelay_t * delay ) [inherited]

Get start delay before enabling XO clock to digital block.

Parameters:

[in] delay delay cycle

Returns:: 0 on success, negative error code on failure.

int get_xoclkdiv ( xoclkdiv_t * div ) [inherited]

Get XO clock division ratio for digital block.

Parameters:

[in] div division ratio

Returns:: 0 on success, negative error code on failure.

int initial_programming ( void ) [inherited]

Initial programming steps after power on or soft reset.

Returns:: 0 on success, negative error code on failure.

Definition at line 1190 of file Max4146x.cpp.

int read_register	(	uint8_t	reg,
		uint8_t *	value,
		uint8_t	len
	)		`[inherited]`

Read from a register.

Parameters:

[in]	reg	Address of a register to be read.
[out]	value	Pointer to save result value.
[in]	len	Size of result to be read.

Returns:: 0 on success, negative error code on failure.

Definition at line 166 of file Max4146x.cpp.

int send_data	(	uint8_t *	data,
		uint32_t	length
	)		`[inherited]`

Send data for selected Preset/I2C/SPI mode.

Parameters:

[in]	data	data pointer for data to be transferred
[in]	length	legth of data to be transferred

Returns:: 0 on success, negative error code on failure.

Definition at line 395 of file Max4146x.cpp.

int set_bclk_postdiv ( bclk_postdiv_t div ) [inherited]

Sets baud clock post-divider.

Parameters:

[in] div divider value

Returns:: 0 on success, negative error code on failure.

int set_bclk_prediv ( uint8_t prediv ) [inherited]

Set Baud clock predivision ratio.

Parameters:

[in] prediv values between 3 and 255

Returns:: 0 on success, negative error code on failure.

int set_center_frequency ( float freq ) [inherited]

Adjust center/carrier frequency of the chip.

Parameters:

[in] freq center/carrier frequency value between 250 MHz and 950 MHz

Returns:: 0 on success, negative error code on failure.

int set_clkout_delay ( clkout_delay_t delay ) [inherited]

Sets clkout delay.

Parameters:

[in] delay delay cycles

Returns:: 0 on success, negative error code on failure.

int set_cplin ( cplin_t cplin ) [inherited]

set level of charge pump offset current

Parameters:

[in] cplin percentage of charge pump current

Returns:: 0 on success, negative error code on failure.

int set_cpval ( cpval_t cpval ) [inherited]

set charge pump current

Parameters:

[in] cpval current value

Returns:: 0 on success, negative error code on failure.

int set_crystal_frequency ( float freq ) [inherited]

Configures the crystal frequency of the chip (Fxtal)

Parameters:

[in] freq crystal frequency values between 12.8 MHz and 19.2 MHz

Returns:: 0 on success, negative error code on failure.

int set_deltaf ( uint8_t deltaf ) [inherited]

Set frequency deviation from the space frequency for the mark frequency.

Parameters:

[in] deltaf frequency deviation value

Returns:: 0 on success, negative error code on failure.

fDELTA = DELTAF[6:0]* fXTAL/8192

int set_deltaf_shape ( uint8_t deltaf_shape ) [inherited]

Set frequency deviation from the space frequency for the mark frequency.

Parameters:

[in] deltaf_shape frequency deviation value

Returns:: 0 on success, negative error code on failure.

fDELTA = DELTAF_SHAPE[3:0]* fXTAL/81920

int set_fracmode ( fracmode_t fracmode ) [inherited]

set PLL mode

Parameters:

[in] fracmode Integer N/Fractional N mode

Returns:: 0 on success, negative error code on failure.

int set_frequency ( uint32_t freq ) [inherited]

Set PLL frequency.

Parameters:

[in] freq FREQ value to PLL between 0x00 and 0xFFFFFF

Returns:: 0 on success, negative error code on failure.

LO frequency = FREQ<23:0>/2^16*fXTAL

int set_fskshape ( fskshape_t shape ) [inherited]

Sets the state of FSK Gaussian Shaping.

Parameters:

[in] shape enable/disable fskshaping

Returns:: 0 on success, negative error code on failure.

int set_i2c_pktlen ( uint16_t pktlen ) [inherited]

Set Packet Length for I2C communication.

Parameters:

[in] pktlen values between 0x00 and 0x7FF

Returns:: 0 on success, negative error code on failure.

int set_lodiv ( lodiv_t lodiv ) [inherited]

set divider of LC VCO

Parameters:

[in] lodiv divider value

Returns:: 0 on success, negative error code on failure.

int set_lomode ( lomode_t lomode ) [inherited]

set LO generation

Parameters:

[in] lomode selection of mode

Returns:: 0 on success, negative error code on failure.

int set_modmode ( modmode_t mode ) [inherited]

Sets modulator mode to ASK or FSK.

Parameters:

[in] mode ASK or FSK

Returns:: 0 on success, negative error code on failure.

int set_pa_boost ( pa_boost_t pa_boost ) [inherited]

enable/disable boost mode

Parameters:

[in] pa_boost power amplifier output mode

Returns:: 0 on success, negative error code on failure.

int set_pacap ( pacap_t pacap ) [inherited]

set shunt capacitance value

Parameters:

[in] pacap shunt capacitance value

Returns:: 0 on success, negative error code on failure.

int set_papwr ( papwr_t papwr ) [inherited]

set PA output power by enabling parallel drivers

Parameters:

[in] papwr number of parallel drivers

Returns:: 0 on success, negative error code on failure.

int set_pktlen_mode ( pktlen_mode_t pktlen_mode ) [inherited]

set packet length

Parameters:

[in] pktlen_mode packet length mode

Returns:: 0 on success, negative error code on failure.

int set_pwdn_mode ( pwdn_mode_t pwdn_mode ) [inherited]

Sets power down mode.

Parameters:

[in] pwdn_mode power down mode

Returns:: 0 on success, negative error code on failure.

int set_softreset ( softreset_t softreset ) [inherited]

set softreset bit

Parameters:

[in] softreset enable/disable

Returns:: 0 on success, negative error code on failure.

int set_sync ( sync_t state ) [inherited]

Sets the state of clock pin.

Parameters:

[in] state pin state async/sync

Returns:: 0 on success, negative error code on failure.

int set_tstep ( uint8_t tstep ) [inherited]

Controls GFSK shaping.

Parameters:

[in] tstep values between 0 and 31

Returns:: 0 on success, negative error code on failure.

int set_xoclkdelay ( xoclkdelay_t delay ) [inherited]

Set start delay before enabling XO clock to digital block.

Parameters:

[in] delay delay cycle

Returns:: 0 on success, negative error code on failure.

int set_xoclkdiv ( xoclkdiv_t div ) [inherited]

Set XO clock division ratio for digital block.

Parameters:

[in] div division ratio

Returns:: 0 on success, negative error code on failure.

int write_register	(	uint8_t	reg,
		const uint8_t *	value,
		uint8_t	len
	)		`[inherited]`

Write to a register.

Parameters:

[in]	reg	Address of a register to be written.
[out]	value	Pointer of value to be written to register.
[in]	len	Size of result to be written.

Returns:: 0 on success, negative error code on failure.

Definition at line 218 of file Max4146x.cpp.

Type:	Program
Mbed OS support:	Mbed OS
Created:	25 Oct 2020
Imports:	0
Forks:	0
Commits:	1
Dependents:	0
Dependencies:	1
Followers:	1

MAX41460 Class Reference

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation

Repository toolbox

Repository details

Important Information for this Arm website

MAX41460 Class Reference

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning