Extending the X_NUCLEO_IDW01M1 to allow configuration of the board as an access point
Dependents: X_NUCLEO_IDW01M1_AP_Test
Fork of X_NUCLEO_IDW01M1 by
Diff: Spwf/wifi_interface.c
- Revision:
- 6:e7a3fca2df10
- Parent:
- 5:c83ffd44f40a
- Child:
- 7:0fdd186a7d90
diff -r c83ffd44f40a -r e7a3fca2df10 Spwf/wifi_interface.c --- a/Spwf/wifi_interface.c Wed May 04 12:16:20 2016 +0000 +++ b/Spwf/wifi_interface.c Mon May 09 10:38:22 2016 +0000 @@ -624,75 +624,7 @@ return status; } -/** -* @brief wifi_socket_server_write -* Write to a Server socket -* @param None -* @retval WiFi_Status_t : return status of server socket request -*/ -WiFi_Status_t wifi_socket_server_write(uint16_t DataLength,char * pData) -{ -WiFi_Status_t status = WiFi_MODULE_SUCCESS; -/*Can only write if there is a client connected*/ -if(!wifi_client_connected) -{ -return WiFi_NOT_READY; -} - __disable_irq(); -status_flag.do_not_reset_push_WIFI_event = WIFI_TRUE; -status_flag.prevent_push_WIFI_event = WIFI_TRUE; -__enable_irq(); - -while(status_flag.sock_read_ongoing || WIND64_count!= 0)//wait till any pending data is read -{ - asm("NOP"); -} - -wait_for_command_mode(); - -/*to make sure that by default the mode is not switched to command mode from data mode*/ -status_flag.switch_by_default_to_command_mode = WIFI_FALSE; - -/*Switch to Data Mode first*/ -if(!status_flag.data_mode) -{ -WiFi_switch_to_data_mode();//switch by default -while(!status_flag.data_mode) -{ - //Wait till data_mode is active - asm("NOP"); -} -} - -/*Write the data on the uart*/ -/*if(HAL_UART_Transmit(&UartWiFiHandle, (uint8_t *)pData, DataLength,1000)!= HAL_OK) -{ -Error_Handler(); -return WiFi_HAL_UART_ERROR; -}*/ -//HAL_Delay(100);//Wait for tx before switching back to command mode - -/*Switch back to Command Mode*/ -if(!status_flag.command_mode) -{ -WiFi_switch_to_command_mode();//switch by default -while(!status_flag.command_mode) -{ - //Wait till command_mode is active - asm("NOP"); -} -} - -status_flag.switch_by_default_to_command_mode = WIFI_TRUE; /*back to default behaviour*/ - -__disable_irq(); -status_flag.prevent_push_WIFI_event = WIFI_FALSE; -status_flag.do_not_reset_push_WIFI_event = WIFI_FALSE; -__enable_irq(); - -return status; -} /** * @brief Server Socket Close