Diff: main.cpp

Revision:

15:327d7329072c

Parent:

11:200931be5617

Child:

16:542a9db01350

diff -r 6ea5d1012a64 -r 327d7329072c main.cpp
--- a/main.cpp	Wed Dec 18 11:52:37 2013 +0000
+++ b/main.cpp	Wed Dec 18 12:07:38 2013 +0000
@@ -10,27 +10,12 @@
 /* Radio HW abstraction layer */
 nRF51822 radio;
 
-/* Battery Level Service */
-/* See --> https://developer.bluetooth.org/gatt/services/Pages/ServiceViewer.aspx?u=org.bluetooth.service.battery_service.xml */
-GattService        battService   ( 0x180F );
-GattCharacteristic battLevel     ( 0x2A19, 1, 1, BLE_GATT_CHAR_PROPERTIES_NOTIFY | BLE_GATT_CHAR_PROPERTIES_READ );
-
 /* Heart Rate Monitor Service */
 /* See --> https://developer.bluetooth.org/gatt/services/Pages/ServiceViewer.aspx?u=org.bluetooth.service.heart_rate.xml */
 GattService        hrmService    ( 0x180D );
 GattCharacteristic hrmRate       ( 0x2A37, 2, 3, BLE_GATT_CHAR_PROPERTIES_NOTIFY );
 GattCharacteristic hrmLocation   ( 0x2A39, 1, 1, BLE_GATT_CHAR_PROPERTIES_READ );
 
-/* Health Thermometer Service */
-/* See --> https://developer.bluetooth.org/gatt/services/Pages/ServiceViewer.aspx?u=org.bluetooth.service.health_thermometer.xml */
-GattService        thermService  ( 0x1809 );
-GattCharacteristic thermTemp     ( 0x2A1C, 5, 13, BLE_GATT_CHAR_PROPERTIES_INDICATE );
-GattCharacteristic thermType     ( 0x2A1D, 1, 1, BLE_GATT_CHAR_PROPERTIES_READ );
-GattCharacteristic thermInterval ( 0x2A21, 2, 2, BLE_GATT_CHAR_PROPERTIES_READ );
-
-/* Notify   = device (server) sends data when it changes */
-/* Indicate = device (server) sends data when it changes and client confirms reception */
-
 /* GAP Advertising Example (iBeacon) */
 GapAdvertisingParams advParams ( GapAdvertisingParams::ADV_NON_CONNECTABLE_UNDIRECTED );
 GapAdvertisingData   advData;
@@ -51,60 +36,29 @@
     error = radio.start();
 }
 
-int main()
+void startHRM(void)
 {
-    wait(2);
-    startBeacon();
-    while(1);
-
-    /* Add the battery level characteristic to the battery service          */
-    /* Note: This will also update the characteristic's .index field        */
-    /* so that we know where it's stored in the BLEService.characteristics  */
-    /* array.                                                               */
-    battService.addCharacteristic(battLevel);
+    uint8_t hrmCounter = 100;
     
     /* Add the heart rate and sensor location chars to the HRM service      */
     hrmService.addCharacteristic(hrmRate);
     hrmService.addCharacteristic(hrmLocation);
-    
-    /* Add the Health Thermometer server characteristics                    */
-    thermService.addCharacteristic(thermTemp);
-    thermService.addCharacteristic(thermType);
-    thermService.addCharacteristic(thermInterval);
-    
+
     /* Reset the BLE hardware to make sure we get a clean start             */
     wait(2);
     radio.reset();
     
     /* Add the services to the radio HAL */
-    radio.addService(battService);
     radio.addService(hrmService);
-    radio.addService(thermService);
     
     /* Start the services so that we can start pushing data out */
     radio.start();
-
+    
     /* Set the heart rate monitor location (one time only) */
     /* See --> https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.body_sensor_location.xml */
     uint8_t location = 0x01; /* Chest */
     radio.writeCharacteristic(hrmService, hrmLocation, (uint8_t*)&location, sizeof(location));
 
-    /* Update the battery level */
-    /* See --> https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.battery_level.xml */
-    uint8_t batt = 72; /* Percentage (0..100) */
-    radio.writeCharacteristic(battService, battLevel, (uint8_t*)&batt, sizeof(batt));
-
-    /* Update the fixed health thermometer characteristics */
-    /* See --> https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.temperature_type.xml */
-    uint8_t thermLocation = 6; /* Location = mouth */
-    radio.writeCharacteristic(thermService, thermType, (uint8_t*)&thermLocation, sizeof(thermLocation));
-    /* See --> https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.measurement_interval.xml */
-    uint16_t thermDelay = 5;
-    radio.writeCharacteristic(thermService, thermInterval, (uint8_t*)&thermDelay, sizeof(thermDelay));
-    
-    /* Blinky + value updates */
-    uint8_t hrmCounter = 100;
-        
     while(1)
     {
         myled = 1;
@@ -119,20 +73,17 @@
         if (hrmCounter == 175) hrmCounter = 100;
         uint8_t bpm[2] = { 0x00, hrmCounter };
         radio.writeCharacteristic(hrmService, hrmRate, bpm, 2);
-        
-        /* Update the Health Thermometer measurement */
-        
-        // NOTE: This is an IEEE-11073 32-bit float NOT a IEEE-754 float (standard single precision float type) !!!
-        // See: Section 2.2 of https://www.bluetooth.org/docman/handlers/downloaddoc.ashx?doc_id=242961
-        // Example:
-        // Consider a temperature measurement of 36.4 degrees Celsius with precision of 0.1 degrees Celsius.
-        // The FLOAT-Type representation is a 32-bit value consisting of an exponent of an 8-bit signed integer
-        // followed by a mantissa of a 24-bit signed integer; here, the exponent is -1 (0xFF) and the mantissa
-        // is 364 (0x00016C). Therefore, the FLOAT-Type representation of 36.4 is 0xFF00016C.
-        
-        uint8_t temperature[5] = { 0x00, 0x00, 0x00, 0x00, 0xFF };
-        // Use the hrm counter to provide a shifting temperature value (175 = 17.5C, etc.)
-        memcpy (temperature+1, &hrmCounter, 1);
-        radio.writeCharacteristic(thermService, thermTemp, temperature, 5);
     }
 }
+
+int main()
+{
+    /* Give the radio some time to boot up and settle */
+    wait(2);
+
+    /* Only use one of these two options! */
+    startBeacon();
+    // startHRM();
+    
+    while(1);
+}