Diff: main.cpp

Revision:

16:542a9db01350

Parent:

15:327d7329072c

Child:

23:f19c60478e1b

--- a/main.cpp	Wed Dec 18 12:07:38 2013 +0000
+++ b/main.cpp	Wed Dec 18 18:02:45 2013 +0000
@@ -1,89 +1,38 @@
 #include "mbed.h"
-
 #include "uuid.h"
-#include "GattService.h"
-#include "GattCharacteristic.h"
 #include "hw/nrf51822.h"
 
 DigitalOut        myled ( LED1 );
 
-/* Radio HW abstraction layer */
+/* Radio HW */
 nRF51822 radio;
 
-/* Heart Rate Monitor Service */
-/* See --> https://developer.bluetooth.org/gatt/services/Pages/ServiceViewer.aspx?u=org.bluetooth.service.heart_rate.xml */
-GattService        hrmService    ( 0x180D );
-GattCharacteristic hrmRate       ( 0x2A37, 2, 3, BLE_GATT_CHAR_PROPERTIES_NOTIFY );
-GattCharacteristic hrmLocation   ( 0x2A39, 1, 1, BLE_GATT_CHAR_PROPERTIES_READ );
-
-/* GAP Advertising Example (iBeacon) */
-GapAdvertisingParams advParams ( GapAdvertisingParams::ADV_NON_CONNECTABLE_UNDIRECTED );
-GapAdvertisingData   advData;
-GapAdvertisingData   scanResponse;
-
-uint8_t iBeaconPayload[25] = { 0x4C, 0x00, 0x02, 0x15, 0xE2, 0x0A, 0x39, 0xF4, 0x73, 0xF5, 0x4B, 0xC4, 0xA1, 0x2F, 0x17, 0xD1, 0xAD, 0x07, 0xA9, 0x61, 0x00, 0x00, 0x00, 0x00, 0xC8 };
-
 void startBeacon(void)
 {
+    GapAdvertisingParams advParams ( GapAdvertisingParams::ADV_NON_CONNECTABLE_UNDIRECTED );
+    GapAdvertisingData   advData;
+    GapAdvertisingData   scanResponse;
+    
+    uint8_t iBeaconPayload[25] = { 0x4C, 0x00, 0x02, 0x15, 0xE2, 0x0A, 0x39, 0xF4, 0x73, 0xF5, 0x4B, 0xC4, 0xA1, 0x2F, 0x17, 0xD1, 0xAD, 0x07, 0xA9, 0x61, 0x00, 0x00, 0x00, 0x00, 0xC8 };
+    
+    /* ToDo: Check error conditions in a shared ASSERT with debug output via printf */
     ble_error_t error;
     
     /* iBeacon includes the FLAG and MSD fields */
-    advData.addFlags(GapAdvertisingData::BREDR_NOT_SUPPORTED);
-    advData.addData(GapAdvertisingData::MANUFACTURER_SPECIFIC_DATA, iBeaconPayload, 25);
-    
+    error = advData.addFlags(GapAdvertisingData::BREDR_NOT_SUPPORTED);
+    error = advData.addData(GapAdvertisingData::MANUFACTURER_SPECIFIC_DATA, iBeaconPayload, 25);
+
     error = radio.reset();
     error = radio.setAdvertising(advParams, advData, scanResponse);
     error = radio.start();
 }
 
-void startHRM(void)
-{
-    uint8_t hrmCounter = 100;
-    
-    /* Add the heart rate and sensor location chars to the HRM service      */
-    hrmService.addCharacteristic(hrmRate);
-    hrmService.addCharacteristic(hrmLocation);
-
-    /* Reset the BLE hardware to make sure we get a clean start             */
-    wait(2);
-    radio.reset();
-    
-    /* Add the services to the radio HAL */
-    radio.addService(hrmService);
-    
-    /* Start the services so that we can start pushing data out */
-    radio.start();
-    
-    /* Set the heart rate monitor location (one time only) */
-    /* See --> https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.body_sensor_location.xml */
-    uint8_t location = 0x01; /* Chest */
-    radio.writeCharacteristic(hrmService, hrmLocation, (uint8_t*)&location, sizeof(location));
-
-    while(1)
-    {
-        myled = 1;
-        wait(0.1);
-        myled = 0;
-        wait(0.1);
-                
-        /* Update the HRM measurement */
-        /* First byte = 8-bit values, no extra info, Second byte = uint8_t HRM value */
-        /* See --> https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.heart_rate_measurement.xml */
-        hrmCounter++;
-        if (hrmCounter == 175) hrmCounter = 100;
-        uint8_t bpm[2] = { 0x00, hrmCounter };
-        radio.writeCharacteristic(hrmService, hrmRate, bpm, 2);
-    }
-}
-
 int main()
 {
     /* Give the radio some time to boot up and settle */
     wait(2);
 
-    /* Only use one of these two options! */
     startBeacon();
-    // startHRM();
     
     while(1);
 }