robo 8080
/
BLE_TEST_konashi
konashi/SBBLEのテスト
Fork of BLE_LoopbackUART by
nRF51822/common/ble_error.h@8:a62b8f7d5dcf, 2014-08-17 (annotated)
- Committer:
- robo8080
- Date:
- Sun Aug 17 00:53:23 2014 +0000
- Revision:
- 8:a62b8f7d5dcf
- Parent:
- 5:61109bce11fe
DeviceName??
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
robo8080 | 5:61109bce11fe | 1 | /**************************************************************************/ |
robo8080 | 5:61109bce11fe | 2 | /*! |
robo8080 | 5:61109bce11fe | 3 | @file ble_error.h |
robo8080 | 5:61109bce11fe | 4 | @author hathach (tinyusb.org) |
robo8080 | 5:61109bce11fe | 5 | |
robo8080 | 5:61109bce11fe | 6 | @section LICENSE |
robo8080 | 5:61109bce11fe | 7 | |
robo8080 | 5:61109bce11fe | 8 | Software License Agreement (BSD License) |
robo8080 | 5:61109bce11fe | 9 | |
robo8080 | 5:61109bce11fe | 10 | Copyright (c) 2013, K. Townsend (microBuilder.eu) |
robo8080 | 5:61109bce11fe | 11 | All rights reserved. |
robo8080 | 5:61109bce11fe | 12 | |
robo8080 | 5:61109bce11fe | 13 | Redistribution and use in source and binary forms, with or without |
robo8080 | 5:61109bce11fe | 14 | modification, are permitted provided that the following conditions are met: |
robo8080 | 5:61109bce11fe | 15 | 1. Redistributions of source code must retain the above copyright |
robo8080 | 5:61109bce11fe | 16 | notice, this list of conditions and the following disclaimer. |
robo8080 | 5:61109bce11fe | 17 | 2. Redistributions in binary form must reproduce the above copyright |
robo8080 | 5:61109bce11fe | 18 | notice, this list of conditions and the following disclaimer in the |
robo8080 | 5:61109bce11fe | 19 | documentation and/or other materials provided with the distribution. |
robo8080 | 5:61109bce11fe | 20 | 3. Neither the name of the copyright holders nor the |
robo8080 | 5:61109bce11fe | 21 | names of its contributors may be used to endorse or promote products |
robo8080 | 5:61109bce11fe | 22 | derived from this software without specific prior written permission. |
robo8080 | 5:61109bce11fe | 23 | |
robo8080 | 5:61109bce11fe | 24 | THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY |
robo8080 | 5:61109bce11fe | 25 | EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
robo8080 | 5:61109bce11fe | 26 | WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
robo8080 | 5:61109bce11fe | 27 | DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY |
robo8080 | 5:61109bce11fe | 28 | DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
robo8080 | 5:61109bce11fe | 29 | (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
robo8080 | 5:61109bce11fe | 30 | LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
robo8080 | 5:61109bce11fe | 31 | ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
robo8080 | 5:61109bce11fe | 32 | (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
robo8080 | 5:61109bce11fe | 33 | SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
robo8080 | 5:61109bce11fe | 34 | */ |
robo8080 | 5:61109bce11fe | 35 | /**************************************************************************/ |
robo8080 | 5:61109bce11fe | 36 | |
robo8080 | 5:61109bce11fe | 37 | /** \file |
robo8080 | 5:61109bce11fe | 38 | * \brief Error Header |
robo8080 | 5:61109bce11fe | 39 | * |
robo8080 | 5:61109bce11fe | 40 | * \note TBD |
robo8080 | 5:61109bce11fe | 41 | */ |
robo8080 | 5:61109bce11fe | 42 | |
robo8080 | 5:61109bce11fe | 43 | /** \ingroup Group_Common |
robo8080 | 5:61109bce11fe | 44 | * \defgroup Group_Error Error Codes |
robo8080 | 5:61109bce11fe | 45 | * @{ |
robo8080 | 5:61109bce11fe | 46 | */ |
robo8080 | 5:61109bce11fe | 47 | |
robo8080 | 5:61109bce11fe | 48 | #ifndef _BLE_ERROR_H_ |
robo8080 | 5:61109bce11fe | 49 | #define _BLE_ERROR_H_ |
robo8080 | 5:61109bce11fe | 50 | |
robo8080 | 5:61109bce11fe | 51 | #include "projectconfig.h" |
robo8080 | 5:61109bce11fe | 52 | |
robo8080 | 5:61109bce11fe | 53 | #ifdef __cplusplus |
robo8080 | 5:61109bce11fe | 54 | extern "C" { |
robo8080 | 5:61109bce11fe | 55 | #endif |
robo8080 | 5:61109bce11fe | 56 | |
robo8080 | 5:61109bce11fe | 57 | typedef enum |
robo8080 | 5:61109bce11fe | 58 | { |
robo8080 | 5:61109bce11fe | 59 | /*======================================================================= |
robo8080 | 5:61109bce11fe | 60 | NORDIC GLOBAL ERRORS 0x0000 .. 0x00FF |
robo8080 | 5:61109bce11fe | 61 | ----------------------------------------------------------------------- |
robo8080 | 5:61109bce11fe | 62 | Errors mapped from nrf_error.h |
robo8080 | 5:61109bce11fe | 63 | -----------------------------------------------------------------------*/ |
robo8080 | 5:61109bce11fe | 64 | ERROR_NONE = 0x0000 , ///< Successful command |
robo8080 | 5:61109bce11fe | 65 | ERROR_SVC_HANDLER_MISSING = 0x0001 , ///< SVC handler is missing |
robo8080 | 5:61109bce11fe | 66 | ERROR_SOFTDEVICE_NOT_ENABLED = 0x0002 , ///< SoftDevice has not been enabled |
robo8080 | 5:61109bce11fe | 67 | ERROR_INTERNAL = 0x0003 , ///< Internal Error |
robo8080 | 5:61109bce11fe | 68 | ERROR_NO_MEM = 0x0004 , ///< No Memory for operation |
robo8080 | 5:61109bce11fe | 69 | ERROR_NOT_FOUND = 0x0005 , ///< Not found |
robo8080 | 5:61109bce11fe | 70 | ERROR_NOT_SUPPORTED = 0x0006 , ///< Not supported |
robo8080 | 5:61109bce11fe | 71 | ERROR_INVALID_PARAM = 0x0007 , ///< Invalid Parameter |
robo8080 | 5:61109bce11fe | 72 | ERROR_INVALID_STATE = 0x0008 , ///< Invalid state, operation disallowed in this state |
robo8080 | 5:61109bce11fe | 73 | ERROR_INVALID_LENGTH = 0x0009 , ///< Invalid Length |
robo8080 | 5:61109bce11fe | 74 | ERROR_INVALID_FLAGS = 0x000A , ///< Invalid Flags |
robo8080 | 5:61109bce11fe | 75 | ERROR_INVALID_DATA = 0x000B , ///< Invalid Data |
robo8080 | 5:61109bce11fe | 76 | ERROR_DATA_SIZE = 0x000C , ///< Data size exceeds limit |
robo8080 | 5:61109bce11fe | 77 | ERROR_TIMEOUT = 0x000D , ///< Operation timed out |
robo8080 | 5:61109bce11fe | 78 | ERROR_NULL = 0x000E , ///< Null Pointer |
robo8080 | 5:61109bce11fe | 79 | ERROR_FORBIDDEN = 0x000F , ///< Forbidden Operation |
robo8080 | 5:61109bce11fe | 80 | ERROR_INVALID_ADDR = 0x0010 , ///< Bad Memory Address |
robo8080 | 5:61109bce11fe | 81 | ERROR_BUSY = 0x0011 , ///< Busy |
robo8080 | 5:61109bce11fe | 82 | /*=======================================================================*/ |
robo8080 | 5:61109bce11fe | 83 | |
robo8080 | 5:61109bce11fe | 84 | ERROR_INVALIDPARAMETER = 0x0100 , /**< An invalid parameter value was provided */ |
robo8080 | 5:61109bce11fe | 85 | ERROR_I2C_XFER_FAILED = 0x0101 , /**< an failed attempt to make I2C transfer */ |
robo8080 | 5:61109bce11fe | 86 | |
robo8080 | 5:61109bce11fe | 87 | /*======================================================================= |
robo8080 | 5:61109bce11fe | 88 | SIMPLE BINARY PROTOCOL ERRORS 0x0120 .. 0x013F |
robo8080 | 5:61109bce11fe | 89 | ----------------------------------------------------------------------- |
robo8080 | 5:61109bce11fe | 90 | Errors relating to the simple binary protocol (/src//protocol) |
robo8080 | 5:61109bce11fe | 91 | -----------------------------------------------------------------------*/ |
robo8080 | 5:61109bce11fe | 92 | ERROR_PROT_INVALIDMSGTYPE = 0x121, /**< Unexpected msg type encountered */ |
robo8080 | 5:61109bce11fe | 93 | ERROR_PROT_INVALIDCOMMANDID = 0x122, /**< Unknown or out of range command ID */ |
robo8080 | 5:61109bce11fe | 94 | ERROR_PROT_INVALIDPAYLOAD = 0x123, /**< Message payload has a problem (invalid len, etc.) */ |
robo8080 | 5:61109bce11fe | 95 | /*=======================================================================*/ |
robo8080 | 5:61109bce11fe | 96 | |
robo8080 | 5:61109bce11fe | 97 | //------------- based on Nordic SDM nrf_error_sdm.h -------------// |
robo8080 | 5:61109bce11fe | 98 | ERROR_SDM_LFCLK_SOURCE_UNKNOWN = 0x1000 , ///< Unknown lfclk source |
robo8080 | 5:61109bce11fe | 99 | ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION = 0x1001 , ///< Incorrect interrupt configuration (can be caused by using illegal priority levels, or having enabled SoftDevice interrupts) |
robo8080 | 5:61109bce11fe | 100 | ERROR_SDM_INCORRECT_CLENR0 = 0x1002 , ///< Incorrect CLENR0 (can be caused by erronous SoftDevice flashing) |
robo8080 | 5:61109bce11fe | 101 | |
robo8080 | 5:61109bce11fe | 102 | //------------- based on Nordic SOC nrf_error_soc.h -------------// |
robo8080 | 5:61109bce11fe | 103 | /* Mutex Errors */ |
robo8080 | 5:61109bce11fe | 104 | ERROR_SOC_MUTEX_ALREADY_TAKEN = 0x2000 , ///< Mutex already taken |
robo8080 | 5:61109bce11fe | 105 | |
robo8080 | 5:61109bce11fe | 106 | /* NVIC errors */ |
robo8080 | 5:61109bce11fe | 107 | ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE = 0x2001 , ///< NVIC interrupt not available |
robo8080 | 5:61109bce11fe | 108 | ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED = 0x2002 , ///< NVIC interrupt priority not allowed |
robo8080 | 5:61109bce11fe | 109 | ERROR_SOC_NVIC_SHOULD_NOT_RETURN = 0x2003 , ///< NVIC should not return |
robo8080 | 5:61109bce11fe | 110 | |
robo8080 | 5:61109bce11fe | 111 | /* Power errors */ |
robo8080 | 5:61109bce11fe | 112 | ERROR_SOC_POWER_MODE_UNKNOWN = 0x2004 , ///< Power mode unknown |
robo8080 | 5:61109bce11fe | 113 | ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN = 0x2005 , ///< Power POF threshold unknown |
robo8080 | 5:61109bce11fe | 114 | ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN = 0x2006 , ///< Power off should not return |
robo8080 | 5:61109bce11fe | 115 | |
robo8080 | 5:61109bce11fe | 116 | /* Rand errors */ |
robo8080 | 5:61109bce11fe | 117 | ERROR_SOC_RAND_NOT_ENOUGH_VALUES = 0x2007 , ///< RAND not enough values |
robo8080 | 5:61109bce11fe | 118 | |
robo8080 | 5:61109bce11fe | 119 | /* PPI errors */ |
robo8080 | 5:61109bce11fe | 120 | ERROR_SOC_PPI_INVALID_CHANNEL = 0x2008 , ///< Invalid PPI Channel |
robo8080 | 5:61109bce11fe | 121 | ERROR_SOC_PPI_INVALID_GROUP = 0x2009 , ///< Invalid PPI Group |
robo8080 | 5:61109bce11fe | 122 | |
robo8080 | 5:61109bce11fe | 123 | //------------- based on Nordic STK (ble) ble_err.h -------------// |
robo8080 | 5:61109bce11fe | 124 | ERROR_BLE_INVALID_CONN_HANDLE = 0x3001 , /**< Invalid connection handle. */ |
robo8080 | 5:61109bce11fe | 125 | ERROR_BLE_INVALID_ATTR_HANDLE = 0x3002 , /**< Invalid attribute handle. */ |
robo8080 | 5:61109bce11fe | 126 | ERROR_BLE_NO_TX_BUFFERS = 0x3003 , /**< Buffer capacity exceeded. */ |
robo8080 | 5:61109bce11fe | 127 | |
robo8080 | 5:61109bce11fe | 128 | // L2CAP |
robo8080 | 5:61109bce11fe | 129 | ERROR_BLE_L2CAP_CID_IN_USE = 0x3100 , /**< CID already in use. */ |
robo8080 | 5:61109bce11fe | 130 | |
robo8080 | 5:61109bce11fe | 131 | // GAP |
robo8080 | 5:61109bce11fe | 132 | ERROR_BLE_GAP_UUID_LIST_MISMATCH = 0x3200 , /**< UUID list does not contain an integral number of UUIDs. */ |
robo8080 | 5:61109bce11fe | 133 | ERROR_BLE_GAP_DISCOVERABLE_WITH_WHITELIST = 0x3201 , /**< Use of Whitelist not permitted with discoverable advertising. */ |
robo8080 | 5:61109bce11fe | 134 | ERROR_BLE_GAP_INVALID_BLE_ADDR = 0x3202 , /**< The upper two bits of the address do not correspond to the specified address type. */ |
robo8080 | 5:61109bce11fe | 135 | |
robo8080 | 5:61109bce11fe | 136 | // GATTC |
robo8080 | 5:61109bce11fe | 137 | ERROR_BLE_GATTC_PROC_NOT_PERMITTED = 0x3300 , |
robo8080 | 5:61109bce11fe | 138 | |
robo8080 | 5:61109bce11fe | 139 | // GATTS |
robo8080 | 5:61109bce11fe | 140 | ERROR_BLEGATTS_INVALID_ATTR_TYPE = 0x3400 , /**< Invalid attribute type. */ |
robo8080 | 5:61109bce11fe | 141 | ERROR_BLEGATTS_SYS_ATTR_MISSING = 0x3401 , /**< System Attributes missing. */ |
robo8080 | 5:61109bce11fe | 142 | |
robo8080 | 5:61109bce11fe | 143 | }error_t; |
robo8080 | 5:61109bce11fe | 144 | |
robo8080 | 5:61109bce11fe | 145 | #ifdef __cplusplus |
robo8080 | 5:61109bce11fe | 146 | } |
robo8080 | 5:61109bce11fe | 147 | #endif |
robo8080 | 5:61109bce11fe | 148 | |
robo8080 | 5:61109bce11fe | 149 | #endif /* _BLE_ERROR_H_ */ |
robo8080 | 5:61109bce11fe | 150 | |
robo8080 | 5:61109bce11fe | 151 | /** @} */ |