Example source code for Maxim Integrated MAX6605 low-power, inexpensive analog output temperature sensor using the MAX32630FTHR analog input. The MAX6605 precision, low-power, inexpensive, analog output temperature sensor is available in a 5-pin SC70 package. The device has a +2.7V to +5.5V supply voltage range and 10µA supply current over the -55°C to +125°C temperature range.
Dependencies: max32630fthr USBDevice
main.cpp
- Committer:
- phonemacro
- Date:
- 2019-04-22
- Revision:
- 0:a9f350f894e7
- Child:
- 1:9b9c2989d4eb
File content as of revision 0:a9f350f894e7:
#include "mbed.h" #include "max32630fthr.h" #include "USBSerial.h" MAX32630FTHR pegasus(MAX32630FTHR::VIO_3V3); // Hardware serial port over DAPLink Serial daplink(P2_1, P2_0); // Virtual serial port over USB USBSerial microUSB; DigitalOut rLED(LED1); DigitalOut gLED(LED2); DigitalOut bLED(LED3); /* Analog inputs 0 and 1 have internal dividers to allow measuring 5V signals * The dividers are selected by using inputs AIN_4 and AIN_5 respectively. * The full scale range for AIN0-3 is 1.2V * The full scale range for AIN4-5 is 6.0V */ AnalogIn ain1(AIN_5); const float AIN5_FSV = 6.0f; /* Full scale value for AIN5 */ float max6613_celsius_to_fahrenheit(float temp_c) { float temp_f; temp_f = ((temp_c * 9)/5) + 32; return temp_f; } // main() runs in its own thread in the OS // (note the calls to Thread::wait below for delays) /** * @brief Sample main program for MAX6613 * @version 1.0000.0000 * * @details Sample main program for MAX6613 * The prints are sent to the terminal window (9600, 8n1). * The program sets the GPIOs to 3.3V and the program * configures the chip and reads temperatures. * To run the program, drag and drop the .bin file into the * DAPLINK folder. After it finishes flashing, cycle the power or * reset the Pegasus (MAX32630FTHR) after flashing by pressing the button on * the Pegasus next to the battery connector or the button * on the MAXREFDES100HDK. */ int main() { float temperature; uint32_t i; const float A = -0.00000225f; const float B = -0.01105f; const float C1 = 1.8455f; float c2; microUSB.printf("micro USB serial port\r\n"); rLED = LED_OFF; gLED = LED_ON; bLED = LED_OFF; rLED = LED_OFF; temperature = (float)((1.8455f - (AIN5_FSV * ain1)) / 0.01123f); // daplink.printf("AIN1: %1.5f\n", (AIN5_FSV * ain1) ); // analog inputs 1 daplink.printf("Temperature using Linear Approximation\r\n"); for (i = 0; i < 8; i++) { temperature = (float)((1.8455f - (AIN5_FSV * ain1)) / 0.01123f); daplink.printf("temperature: %3.1f degrees C C, %3.1f degrees F\r\n", temperature, max6613_celsius_to_fahrenheit(temperature)); wait(2); } daplink.printf("\r\n"); daplink.printf("Temperature using the Quadratic Equation\r\n"); for (i = 0; i < 8; i++) { c2 = AIN5_FSV * ain1; temperature = (-B - sqrt(B*B - 4*A*(C1-c2)))/(2*A); daplink.printf("temperature: %3.1f degrees C C, %3.1f degrees F\r\n", temperature, max6613_celsius_to_fahrenheit(temperature)); wait(2); } daplink.printf("\r\n"); while(1) { gLED = !gLED; wait(0.5); } }