Diff: main.cpp

Revision:

46:553559610878

Parent:

45:d26b8bcce561

Child:

47:346a13fbdc0f

--- a/main.cpp	Tue Apr 19 23:23:51 2022 +0000
+++ b/main.cpp	Fri Apr 29 17:13:58 2022 +0000
@@ -37,7 +37,7 @@
 /******************************************************************************
 * https://os.mbed.com/users/phonemacro/code/MAX32664C_Example_Host_Code
 * Tera Term output is set to 115200 baud rate.
-* ver: 220419
+* ver: 220429
 ******************************************************************************/
 
 /******************************************************************************
@@ -51,9 +51,9 @@
 
 /*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*/
 // define one and only one of the following three platforms
-//#define MAXM86146_CFG 1  // tested on MAXM86146EVSYS_sensorBrd+MAXM86161_ADAPTER_REVB+MAX32630FTHR 33.13.12
+#define MAXM86146_CFG 1  // tested on MAXM86146EVSYS_sensorBrd+MAXM86161_ADAPTER_REVB+MAX32630FTHR 33.13.12
 //#define MAXREFDES103_CFG  // not tested
-#define MAXM86161_CFG 1  // tested on MAXM86161+MAX32630FTHR v32.9.22, 32.13.12
+//#define MAXM86161_CFG 1  // tested on MAXM86161+MAX32630FTHR v32.9.22, 32.13.12
 /*****************************************************************************/
 
 /*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*/
@@ -84,8 +84,11 @@
 #endif
 
 /*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*/
-//#define RAW  // define this if you want AFE+accel data, no algorithm
-#define ALGO_ONLY 1  // define this if you only want algo data, comment out if you want raw sensor+algo data
+// comment the three below if you want raw sensor+algo data
+#define ALGO_ONLY 1  // define this if you only want algo data
+//#define RAW  // define this if you want AFE+accel data, no algorithm, tested on 33.13.31
+  #define RAW_HZ 256   // Raw data rate
+  //#define RAW_HZ 100   // Raw data rate
 
 // Comment out both of the below for Normal Algorithm Samples Format
 //#define EXTENDED_ALGO 1  // define this if you want the extended algo samples report format 
@@ -917,6 +920,13 @@
     pc.printf("raw1.6 part id Status: %x %x\n\r", rsp[0], rsp[1]);
 
 // raw1.8 sample rate 100 Hz, ave 1
+#if RAW_HZ == 100
+    cmd[0] = 0x40; cmd[1] = 0x00; cmd[2] = 0x12; cmd[3] = 0x18;  // set AFE reg 0x12 to 100 Hz
+#elif RAW_HZ == 256
+    cmd[0] = 0x40; cmd[1] = 0x00; cmd[2] = 0x12; cmd[3] = 0x78;  // set AFE reg 0x12 to 256 Hz
+#else
+    cmd[0] = 0x40; cmd[1] = 0x00; cmd[2] = 0x12; cmd[3] = 0x18;  // set AFE reg 0x12 to 100 Hz
+#endif
 //    cmd[0] = 0x40; cmd[1] = 0x00; cmd[2] = 0x12; cmd[3] = 0x00;  // set AFE reg 0x12 to 25 Hz
     cmd[0] = 0x40; cmd[1] = 0x00; cmd[2] = 0x12; cmd[3] = 0x18;  // set AFE reg 0x12 to 100 Hz
 //    cmd[0] = 0x40; cmd[1] = 0x00; cmd[2] = 0x12; cmd[3] = 0x20;  // set AFE reg 0x12 to 200 Hz
@@ -1027,7 +1037,13 @@
     while (1) {
         tmr1.start();
 #if defined(RAW) 
+  #if RAW_HZ == 100
         if (tmr1.read_ms() >= 10) {
+  #elif RAW_HZ == 256
+        if (tmr1.read_ms() >= 4) {
+  #else
+        if (tmr1.read_ms() >= 10) {
+  #endif
 #else
   #ifdef REDUCE_RPT_PERIOD
     #ifdef USE_FIFO_BUFFER_CNT