Nathan Ewin
Trying to log data from UM6 sensor with GPS receiver LS20031. I have two problems: - I can't log to file at a fast rate (<0.5s) without data values freezing to a fixed value. Print to pc screen it works fine. Ideally I would do this with an interrupt (e.g. ticker) so that the time of each reading is a fixed interval - I removed this as I thought this was causing the problem. - I want to record GPS lat and long. I have setup the GPS ground speed so I know the sensor are communicating. So I possibly havent set the config file to correctly interpet these two signals.
Fork of
UM6_IMU_AHRS_2012
by 
lhiggs CSUM
Diff: main.cpp
- Revision:
- 5:b3cd0bcf2968
- Parent:
- 4:aefc0f09fe1c
- Child:
- 6:43029c69b9ac
--- a/main.cpp Thu May 02 08:52:53 2013 +0000
+++ b/main.cpp Thu May 02 11:38:25 2013 +0000
@@ -47,13 +47,13 @@
FILE *fp = fopen("/local/out3.csv", "w"); // Open "out.txt" on the local file system for writing
- fprintf(fp, "time (s),Yaw (deg),Roll (deg),Pitch (deg),GyroX,GyroY,GyroZ,AccelX,AccelY,AccelZ\r"); // sends header to file
+ fprintf(fp, "time (s),Yaw (deg),Roll (deg),Pitch (deg),GyroX,GyroY,GyroZ,AccelX,AccelY,AccelZ,GPScourse(x100 deg),GPSspeed(x100 m/s)\r"); // sends header to file
t.start(); // start data log time
sync = 1;
while (enable) {
logLED = 1; // turns LED3 on when logging starts
- wait(0.5);
+ wait(0.05);
float time1=t.read();
float Yaw=data.Yaw;
float Roll=data.Roll;
@@ -67,17 +67,15 @@
// float MagX=data.Mag_Proc_X;
// float MagY=data.Mag_Proc_Y;
// float MagZ=data.Mag_Proc_Z;
- float GPSlong=data.GPS_long;
- float GPSlat=data.GPS_lat;
+ // float GPSlong=data.GPS_long;
+ // float GPSlat=data.GPS_lat;
float GPScourse=data.GPS_course;
float GPSspeed=data.GPS_speed;
- // pc.printf("time1 %3.3f s,Yaw %3.3f deg,Roll %3.3f deg,Pitch %3.3f deg",time1,Yaw,Roll,Pitch);
- pc.printf("time1 %3.3f s,Yaw %3.3f deg, Speed %f 0.01m/s,course %f 0.01m/s, long %f deg, lat %f deg\n",time1,Yaw,GPSspeed,GPScourse,GPSlong,GPSlat);
- // fprintf(fp, "%3.3f,%3.3f,%3.3f,%3.3f \n",time1,Yaw,Roll,Pitch);
- // fprintf(fp, "%3.3f,%3.3f,%3.3f,%3.3f,%3.3f,%3.3f,%3.3f\n",time1,Yaw,Roll,Pitch,GyroX,GyroY,GyroZ);
- // fprintf(fp, "%3.3f,%3.3f,%3.3f,%3.3f,%3.3f,%3.3f,%3.3f,%3.3f,%3.3f,%3.3f\n",time1,Yaw,Roll,Pitch,GyroX,GyroY,GyroZ,AccelX,AccelY,AccelZ);
-
+ // fprintf(fp, "%3.3f, %3.1f,%3.1f,%3.1f, %4.1f,%4.1f,%4.1f, %1.3f,%1.3f,%1.3f, %4.0f,%f\n",time1,Yaw,Roll,Pitch,GyroX,GyroY,GyroZ,AccelX,AccelY,AccelZ,MagX,MagY,MagZ,GPScourse,GPSspeed);
+ // pc.printf("time %3.3f, yaw %3.1f,%3.1f,%3.1f, gyro %4.1f,%4.1f,%4.1f,accel %1.3f,%1.3f,%1.3f,speed %4.0f, course %5.0f\n",time1,Yaw,Roll,Pitch,GyroX,GyroY,GyroZ,AccelX,AccelY,AccelZ,MagX,MagY,MagZ,GPScourse,GPSspeed);
+ pc.printf("time %3.3f, yaw %3.3f\n",time1,Yaw);
+ fprintf(fp, "%3.3f,%3.1f,%3.1f\n",time1,Yaw,GyroX);
pc_activity = !pc_activity; // Lights LED1 when uart RxBuff has > 40 bytes
} // end while(1) loop