Trying to log data from UM6 sensor with GPS receiver LS20031. I have two problems: - I can't log to file at a fast rate (<0.5s) without data values freezing to a fixed value. Print to pc screen it works fine. Ideally I would do this with an interrupt (e.g. ticker) so that the time of each reading is a fixed interval - I removed this as I thought this was causing the problem. - I want to record GPS lat and long. I have setup the GPS ground speed so I know the sensor are communicating. So I possibly havent set the config file to correctly interpet these two signals.
Fork of UM6_IMU_AHRS_2012 by
Diff: main.cpp
- Revision:
- 4:aefc0f09fe1c
- Parent:
- 3:0cfe2e18440d
- Child:
- 5:b3cd0bcf2968
--- a/main.cpp Thu May 02 06:41:42 2013 +0000 +++ b/main.cpp Thu May 02 08:52:53 2013 +0000 @@ -4,7 +4,7 @@ #include "UM6_usart.h" // UM6 USART HEADER #include "UM6_config.h" // UM6 CONFIG HEADER -LocalFileSystem local("local"); // Create the local filesystem under the name "local" +LocalFileSystem local("local"); // Create local filesystem under the name "local" ///////////////////////////////////////////////////////////////////////////////////////////// // SETUP (ASSIGN) SERIAL COMMUNICATION PINS ON MBED