Diff: main.cpp

Revision:

3:ae2b8103e52b

Parent:

2:8c00953d4755

--- a/main.cpp	Tue Nov 06 02:39:40 2012 +0000
+++ b/main.cpp	Fri Nov 09 18:42:56 2012 +0000
@@ -1,23 +1,27 @@
 /*
-*
-* 1.8 - 3.6V (Vdd)
-* 1.62 - 3.6 (Vddio)
-*
-*
-*Altitude = 44330*(1-(p/p0)^(1/5.255))
-*   set p0 to sealevel pressure
-* delta p = 1hPa = 8.43m at sea level
-*
-*/
+ *@file main.cpp
+ *
+ *
+ *
+ *
+ * 1.8 - 3.6V (Vdd)
+ * 1.62 - 3.6 (Vddio)
+ *
+ *
+ *Altitude = 44330*(1-(p/p0)^(1/5.255))
+ *   set p0 to sealevel pressure
+ * delta p = 1hPa = 8.43m at sea level
+ *
+ */
 
 /*
-*Pinout:
-*pin9  = SDA
-*pin10 = SCL
-*pin11 = XCLR (digital out; active low; Resets sensor)
-*pin12 = EOC ("end of conversation"; signal when conversion finished)
-*
-*/
+ *Pinout:
+ *pin9  = SDA
+ *pin10 = SCL
+ *pin11 = XCLR (digital out; active low; Resets sensor)
+ *pin12 = EOC ("end of conversation"; signal when conversion finished)
+ *
+ */
 
 #include "mbed.h"
 #include "BMP085.h"
@@ -26,167 +30,15 @@
 BMP085 alt_sensor(i2c);
 Serial pc(USBTX, USBRX); // tx, rx
 
-/*
-const int bmp085_address = 0xEE; //address of bmp085
-const int P0 = 101325; //pressure at sea level
-
-void bmp085_calibration(void);
-void display_calibration(void);
-unsigned short read_short(int,int);
-
-void write_char(int,int,int);
-
-long get_raw_temp(void);
-void calculations(long);
-
-float get_temperature(void);
-long get_pressure(void);
-float get_altitude(long);
-*/
-
-//short AC1, AC2, AC3, B1, B2, MB, MC, MD, OSS;
-//unsigned short  AC4, AC5, AC6;
 
 int main()
 {
     pc.baud(9600);
     //alt_sensor.display_cal_param(&pc);
-    while(1)
-    {
+    while(1) {
         pc.printf("Temperature: %d\r\n", alt_sensor.get_temperature());
         pc.printf("Pressure: %d\r\n", alt_sensor.get_pressure());
         pc.printf("Altitude: %f\r\n", alt_sensor.get_altitude_ft());
-        
+
         wait(0.5);
     }
-    //Initialize
-    //OSS = STANDARD; //change between enums under bmp085_oss for desired Sampling resolution
-
-    //calibrate
-    //bmp085_calibration();
-    //display_calibration();
-
-    //long raw_temp = get_raw_temp();
-
-    //calculations(raw_temp);
-
-    //float altitude = get_altitude(pressure);
-
-    //pc.printf("Temperature: %f\n",temperature);
-    //pc.printf("Pressure: %l\n", pressure);
-    //pc.printf("Altitude: %f\n", altitude);
-}
-/*
-long get_raw_temp(void)
-{
-    long raw_temp;
-
-    //Read raw temperature value
-    write_char(bmp085_address, 0xF4, 0x2E);
-    wait_ms(4.5);
-    raw_temp = read_short(bmp085_address, 0xF6);
-
-    return raw_temp;
-}
-
-void calculations(long raw_temp)
-{
-    long X1, X2, B5; //temperature;
-
-    //Start temperature calculation
-    X1 = (((long)raw_temp - (long)AC6) * (long)AC5) >> 15;
-    X2 = ((long)MC << 11) / (X1 + MD);
-    B5 = X1 + X2;
-    temperature = ((B5 + 8) >> 4);
-
-    temperature = ((float)temperature / 10.0);
-
-    pc.printf("Temperature: %f\n",temperature);
-
-
-    long raw_pressure, B6, B3, X3;
-    unsigned long B4, B7;
-
-    //Read raw pressure value
-    write_char(bmp085_address, 0xf4, 0x34 | (OSS << 6));
-    wait_ms(5);
-    raw_pressure = read_short(bmp085_address, 0xF6) >> (8 - OSS);
-
-    //Start Pressure calculation
-    B6 = B5 - 4000;
-    X1 = (B2 * (B6 * B6) >> 12) >> 11;
-    X2 = (AC2 * B6) >> 11;
-    X3 = X1 + X2;
-    B3 = (((AC1 * 4 + X3) << OSS + 2) / 4);
-    X1 = (AC3 * B6) >> 13;
-    X2 = (B1 * ((B6 * B6) >> 12)) >> 16;
-    X3 = ((X1 + X2) + 2) >> 2;
-    B4 = (AC4 * (unsigned long)(X3 + 32768)) >> 15;
-    B7 = ((unsigned long)(raw_pressure - B3) * (50000 >> OSS));
-    if (B7 < 0x80000000)
-        pressure = (B7 *2) / B4;
-    else
-        pressure = (B7 / B4) * 2;
-
-    X1 = (pressure >> 8) * (pressure >>8);
-    X1 = (X1 * 3038) >>16;
-    X2 = (-7357 * pressure) >>16;
-    pressure += (X1 + X2 + 3791)>>4;
-
-    pc.printf("Pressure: %f\n", pressure);
-
-}
-
-float get_temperature(void)
-{
-    return temperature;
-}
-
-long get_pressure(void)
-{
-    return pressure;
-}
-
-float get_altitude(long pressure)
-{
-    float altitude;
-
-    altitude = (float)44330 * (1 - pow(( pressure/P0), 0.190295));
-
-    pc.printf("Altitude: %f\n", altitude);
-    return altitude;
-
-}
-
-void bmp085_calibration(void)
-{
-    AC1 = read_short(bmp085_address, 0xAA);
-    AC2 = read_short(bmp085_address, 0xAC);
-    AC3 = read_short(bmp085_address, 0xAE);
-    AC4 = read_short(bmp085_address, 0xB0);
-    AC5 = read_short(bmp085_address, 0xB2);
-    AC6 = read_short(bmp085_address, 0xB4);
-    B1  = read_short(bmp085_address, 0xB6);
-    B2  = read_short(bmp085_address, 0xB8);
-    MB  = read_short(bmp085_address, 0xBA);
-    MC  = read_short(bmp085_address, 0xBC);
-    MD  = read_short(bmp085_address, 0xBE);
-
-}
-
-void display_calibration(void)
-{
-    pc.printf("Calibration Values:\n");
-    pc.printf("AC1 = %d\n",AC1);
-    pc.printf("AC2 = %d\n",AC2);
-    pc.printf("AC3 = %d\n",AC3);
-    pc.printf("AC4 = %d\n",AC4);
-    pc.printf("AC5 = %d\n",AC5);
-    pc.printf("AC6 = %d\n",AC6);
-    pc.printf("B1 = %d\n",B1);
-    pc.printf("B2 = %d\n",B2);
-    pc.printf("MB = %d\n",MB);
-    pc.printf("MC = %d\n",MC);
-    pc.printf("MD = %d\n",MD);
-}*/
-