![](/media/cache/profiles/IMG_0710-2.jpg.50x50_q85.jpg)
Light Show library for organic, calm, light display.
Dependencies: BLE_API mbed nRF51822
Fork of mbed_blinky by
main.cpp
- Committer:
- nargetdev
- Date:
- 2016-02-01
- Revision:
- 25:d48f46d753fd
- Parent:
- 24:52319c0a14b8
- Child:
- 26:8bc9984c4600
File content as of revision 25:d48f46d753fd:
#include "mbed.h" #include "BLE.h" #include "ButtonService.h" //#include "UARTService.h" #include <string> #include "rgb_led.h" #include "sinusoid.h" #include "light_show.h" #include "utility.h" #include "macros.h" #include "config.h" #include "typedef.h" Serial pc(USBTX, USBRX); // tx, rx Rgb strip(RED_PIN, GREEN_PIN, BLUE_PIN, &pc); //UARTService *uartServicePtr; const static char DEVICE_NAME[] = "Bathroom"; static const uint16_t uuid16_list[] = {ButtonService::BUTTON_SERVICE_UUID}; uint8_t motionState = 0; ButtonService *buttonServicePtr; InterruptIn motion(MOTION_PIN); BLEDevice ble; /** Reconnect if bluetooth disconnects **/ void disconnectionCallback(const Gap::DisconnectionCallbackParams_t *params); /** chill for 10 seconds for FIR sensor calibration **/ void calibrate(); /** Light weight interrupt handler **/ void motionIRQ(); int main() { DEBUG("Start Main.\r\n"); strip.init(); strip.channel_check(); strip.quiet(); // Sinusoid s(0.0, 1.0); // for (float ff;; ff+=0.00005) // strip.write(RED, s.get_y(ff)); LightShow show_obj(&strip); /* object that runs the light show */ #define BLE #ifdef BLE //calibrate(); ble.init(); ble.gap().onDisconnection(disconnectionCallback); ButtonService buttonService(ble, false /* initial value for button pressed */); buttonServicePtr = &buttonService; /* setup advertising */ ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE); ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, (uint8_t *)uuid16_list, sizeof(uuid16_list)); ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LOCAL_NAME, (uint8_t *)DEVICE_NAME, sizeof(DEVICE_NAME)); ble.gap().setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED); ble.gap().setAdvertisingInterval(1000); /* 1000ms. */ ble.gap().startAdvertising(); while(1) { #ifdef MKIT motion.rise(&motionIRQ); if (motionState) { pc.printf("Motion detected.\r\n"); buttonServicePtr->updateButtonState(motionState); show_obj.show(); motionState = 0; buttonServicePtr->updateButtonState(motionState); strip.quiet(); } #elif defined NRFDK motion.fall(&strip.show()); #endif ble.waitForEvent(); } #endif//BLE } // END main() void disconnectionCallback(const Gap::DisconnectionCallbackParams_t *params) { DEBUG("Disconnected!\n\r"); DEBUG("Restarting the advertising process\n\r"); ble.startAdvertising(); } void motionIRQ() { motionState = 1; } void calibrate() { //give the sensor some time to calibrate pc.printf("calibrating sensor\n\r"); for(int i = 0; i < CALIBRATION_TIME; i++) { pc.printf("."); identify(CALIBRATION_TIME, strip); wait(.5); } DEBUG(" done\n\r"); strip.quiet(); DEBUG("SENSOR ACTIVE\n\r"); wait(0.05); }