Diff: main.cpp

Revision:

0:bc66d31a6df1

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Mon Jun 29 13:00:43 2015 +0000
@@ -0,0 +1,179 @@
+#include "mbed.h"
+#include "EthernetInterface.h"
+
+#define USE_DHCP    0
+
+#define PORT    5000
+
+const char * IP_Addr    = "192.168.11.194";
+const char * IP_Subnet  = "255.255.255.0";
+const char * IP_Gateway = "192.168.11.1";
+const char * Target_IP  = "192.168.11.227";
+unsigned char MAC_Addr[6] = {0x00,0x08,0xDC,0x12,0x34,0x56};
+
+
+Serial pc(USBTX, USBRX);
+
+DigitalOut ledR0(LED_RED);
+DigitalOut ledG0(LED_GREEN);
+//DigitalOut ledB0(LED_BLUE);
+
+DigitalOut led0(D5);
+DigitalOut led1(D6);
+
+DigitalIn PIR(D8);
+AnalogIn CDS(A0);
+
+#define PLED_ON      led0 = led1 = 1
+#define PLED_OFF     led0 = led1 = 0
+
+int CDS_data;
+int PIR_sensor;
+
+int CDS_check()
+{
+    CDS_data = CDS.read()*1000;
+    return CDS_data;
+}
+
+int PIR_check()
+{
+    PIR_sensor = PIR;
+    return PIR_sensor;
+}
+
+int main() {
+    ledR0 = ledG0 = 1;
+    PLED_OFF;
+
+    unsigned char flag = 1;
+    int csd_int = 2;
+    int pir_int0 = 2;
+    int pir_int1 = 2;
+    int pir_status = 0;
+    
+    pc.baud(115200);
+    wait(0.5f);
+    pc.printf("Hello WIZwiki-W7500!\n\r");
+    pc.printf("===========================================\n\r");
+    
+    EthernetInterface eth;
+    #if USE_DHCP
+    int ret = eth.init(MAC_Addr);
+    #else
+    int ret = eth.init(MAC_Addr,IP_Addr,IP_Subnet,IP_Gateway);
+    #endif
+    TCPSocketConnection client;
+    
+    //eth.link(3000);
+    wait(5);
+    pc.printf("Connecting......wait 5sec \r\n");
+    if (!ret) {
+        pc.printf("Initialized, \r\nMAC: %s\r\n", eth.getMACAddress());
+        ret = eth.connect();
+        if (!ret) {
+            pc.printf("IP: %s \r\nMASK: %s \r\nGW: %s\r\n",
+                      eth.getIPAddress(), eth.getNetworkMask(), eth.getGateway());
+        } else {
+            pc.printf("Error ethernet.connect() - ret = %d\r\n", ret);
+            exit(0);
+        }
+    } else {
+        pc.printf("Error ethernet.init() - ret = %d\r\n", ret);
+        exit(0);
+    }
+    
+    client.connect(Target_IP,5000);
+    
+    if(client.is_connected() == 1){
+        pc.printf("Connected success : %s\r\n", client.get_address());
+        client.send("Hello server!\r\n", 15);
+        PLED_ON;
+        wait(0.2f);
+        PLED_OFF;
+        wait(0.2f);
+        PLED_ON;
+        wait(0.2f);
+        PLED_OFF;
+    }
+    else {
+        pc.printf("Connected fail : %s\r\n", client.get_address());
+        PLED_ON;
+        wait(0.4f);
+        PLED_OFF;
+    }
+
+    while (1) {
+        Timer t;
+        if(CDS_check() > 600){
+            if(csd_int != 0){
+                pc.printf("Now is dark.\r\n");
+                client.send("Now is dark.\r\n", 14);
+                csd_int = 0;
+            }
+            ledG0 = 0;
+            flag = 1;
+            while(flag){
+                if(PIR_check()){
+                    if(pir_int0 != 0){
+                        pc.printf("The movement is detected.\r\n");
+                        pc.printf("Power LED is turned on.\r\n");
+                        client.send("The movement is detected.\r\n", 27);
+                        client.send("Power LED is turned on.\r\n", 25);
+                        pir_int0 = 0;
+                    }
+                    t.stop();
+                    t.reset();
+                    t.start();
+                    pir_status = 1;
+                    ledR0 = 0;
+                    PLED_ON;
+                }
+                if(pir_status == 0) {
+                    flag = 0;
+                }
+                if(t.read_ms() > 5000 && pir_status == 1){
+                    if(pir_int0 != 1){
+                        pc.printf("The movement is not detected.\r\n");
+                        pc.printf("Power LED is turned off.\r\n");
+                        client.send("The movement is not detected.\r\n", 31);
+                        client.send("Power LED is turned off.\r\n", 26);
+                        pir_int0 = 1;
+                    }
+                    t.stop();
+                    t.reset();
+                    pir_status = 0;
+                    ledR0 = 1;
+                    PLED_OFF;
+                    flag = 0;
+                    wait(0.1f);
+                }
+            }
+        }
+        else{
+            if(csd_int != 1){
+                pc.printf("Now is brighter.\r\n");
+                client.send("Now is brighter.\r\n", 18);
+                csd_int = 1;
+            }
+            
+            ledG0 = 1;
+            if(PIR_check()){
+                if(pir_int1 != 0){
+                    pc.printf("The movement is detected.\r\n");
+                    client.send("The movement is detected.\r\n", 27);
+                    pir_int1 = 0;
+                }
+                ledR0 = 0;
+            }
+            else{
+                if(pir_int1 != 1){
+                    pc.printf("The movement is not detected.\r\n");
+                    client.send("The movement is not detected.\r\n", 31);
+                    pir_int1 = 1;
+                }
+                ledR0 = 1;
+            }
+        }
+    }
+}
\ No newline at end of file