Simple "hello world" style program for X-NUCLEO-IKS01A1 MEMS Inertial

Dependencies:   BLE_API X_NUCLEO_IDB0XA1 X_NUCLEO_IKS01A1 mbed

Fork of HelloWorld_IKS01A1 by ST

Embed: (wiki syntax)

« Back to documentation index

Specific interface management functions

Specific interface management functions
[TIM_Private_Functions]

Specific interface management functions. More...

Functions

void TIM_EncoderInterfaceConfig (TIM_TypeDef *TIMx, uint16_t TIM_EncoderMode, uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity)
 Configures the TIMx Encoder Interface.
void TIM_SelectHallSensor (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or disables the TIMx's Hall sensor interface.

Detailed Description

Specific interface management functions.

 ===============================================================================
                    Specific interface management functions
 ===============================================================================  


Function Documentation

void TIM_EncoderInterfaceConfig ( TIM_TypeDef *  TIMx,
uint16_t  TIM_EncoderMode,
uint16_t  TIM_IC1Polarity,
uint16_t  TIM_IC2Polarity 
)

Configures the TIMx Encoder Interface.

Parameters:
TIMx,:where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral.
TIM_EncoderMode,:specifies the TIMx Encoder Mode. This parameter can be one of the following values:

  • TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge depending on TI2FP2 level.
  • TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge depending on TI1FP1 level.
  • TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending on the level of the other input.
TIM_IC1Polarity,:specifies the IC1 Polarity This parameter can be one of the following values:

  • TIM_ICPolarity_Falling: IC Falling edge.
  • TIM_ICPolarity_Rising: IC Rising edge.
TIM_IC2Polarity,:specifies the IC2 Polarity This parameter can be one of the following values:

  • TIM_ICPolarity_Falling: IC Falling edge.
  • TIM_ICPolarity_Rising: IC Rising edge.
Return values:
None

Definition at line 3057 of file stm32f4xx_tim.c.

void TIM_SelectHallSensor ( TIM_TypeDef *  TIMx,
FunctionalState  NewState 
)

Enables or disables the TIMx's Hall sensor interface.

Parameters:
TIMx,:where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral.
NewState,:new state of the TIMx Hall sensor interface. This parameter can be: ENABLE or DISABLE.
Return values:
None

Definition at line 3109 of file stm32f4xx_tim.c.