mbed library sources
Dependents: Encrypted my_mbed lklk CyaSSL_DTLS_Cellular ... more
Superseded
This library was superseded by mbed-dev - https://os.mbed.com/users/mbed_official/code/mbed-dev/.
Development branch of the mbed library sources. This library is kept in synch with the latest changes from the mbed SDK and it is not guaranteed to work.
If you are looking for a stable and tested release, please import one of the official mbed library releases:
Import librarymbed
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
targets/cmsis/TARGET_NORDIC/TARGET_MCU_NRF51822/nrf51.h
- Committer:
- mbed_official
- Date:
- 2015-07-06
- Revision:
- 583:967d0d8b7aed
- Parent:
- 501:36015dec7d16
File content as of revision 583:967d0d8b7aed:
/****************************************************************************************************//** * @file nRF51.h * * @brief CMSIS Cortex-M0 Peripheral Access Layer Header File for * nRF51 from Nordic Semiconductor. * * @version V522 * @date 31. October 2014 * * @note Generated with SVDConv V2.81d * from CMSIS SVD File 'nRF51.xml' Version 522, * * @par Copyright (c) 2013, Nordic Semiconductor ASA * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * * Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * * Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * *******************************************************************************************************/ /** @addtogroup Nordic Semiconductor * @{ */ /** @addtogroup nRF51 * @{ */ #ifndef NRF51_H #define NRF51_H #ifdef __cplusplus extern "C" { #endif /* ------------------------- Interrupt Number Definition ------------------------ */ typedef enum { /* ------------------- Cortex-M0 Processor Exceptions Numbers ------------------- */ Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */ NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */ HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */ SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */ DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */ PendSV_IRQn = -2, /*!< 14 Pendable request for system service */ SysTick_IRQn = -1, /*!< 15 System Tick Timer */ /* ---------------------- nRF51 Specific Interrupt Numbers ---------------------- */ POWER_CLOCK_IRQn = 0, /*!< 0 POWER_CLOCK */ RADIO_IRQn = 1, /*!< 1 RADIO */ UART0_IRQn = 2, /*!< 2 UART0 */ SPI0_TWI0_IRQn = 3, /*!< 3 SPI0_TWI0 */ SPI1_TWI1_IRQn = 4, /*!< 4 SPI1_TWI1 */ GPIOTE_IRQn = 6, /*!< 6 GPIOTE */ ADC_IRQn = 7, /*!< 7 ADC */ TIMER0_IRQn = 8, /*!< 8 TIMER0 */ TIMER1_IRQn = 9, /*!< 9 TIMER1 */ TIMER2_IRQn = 10, /*!< 10 TIMER2 */ RTC0_IRQn = 11, /*!< 11 RTC0 */ TEMP_IRQn = 12, /*!< 12 TEMP */ RNG_IRQn = 13, /*!< 13 RNG */ ECB_IRQn = 14, /*!< 14 ECB */ CCM_AAR_IRQn = 15, /*!< 15 CCM_AAR */ WDT_IRQn = 16, /*!< 16 WDT */ RTC1_IRQn = 17, /*!< 17 RTC1 */ QDEC_IRQn = 18, /*!< 18 QDEC */ LPCOMP_IRQn = 19, /*!< 19 LPCOMP */ SWI0_IRQn = 20, /*!< 20 SWI0 */ SWI1_IRQn = 21, /*!< 21 SWI1 */ SWI2_IRQn = 22, /*!< 22 SWI2 */ SWI3_IRQn = 23, /*!< 23 SWI3 */ SWI4_IRQn = 24, /*!< 24 SWI4 */ SWI5_IRQn = 25 /*!< 25 SWI5 */ } IRQn_Type; /** @addtogroup Configuration_of_CMSIS * @{ */ /* ================================================================================ */ /* ================ Processor and Core Peripheral Section ================ */ /* ================================================================================ */ /* ----------------Configuration of the Cortex-M0 Processor and Core Peripherals---------------- */ #define __CM0_REV 0x0301 /*!< Cortex-M0 Core Revision */ #define __MPU_PRESENT 0 /*!< MPU present or not */ #define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */ #define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ /** @} */ /* End of group Configuration_of_CMSIS */ #include "core_cm0.h" /*!< Cortex-M0 processor and core peripherals */ #include "system_nrf51.h" /*!< nRF51 System */ /* ================================================================================ */ /* ================ Device Specific Peripheral Section ================ */ /* ================================================================================ */ /** @addtogroup Device_Peripheral_Registers * @{ */ /* ------------------- Start of section using anonymous unions ------------------ */ #if defined(__CC_ARM) #pragma push #pragma anon_unions #elif defined(__ICCARM__) #pragma language=extended #elif defined(__GNUC__) /* anonymous unions are enabled by default */ #elif defined(__TMS470__) /* anonymous unions are enabled by default */ #elif defined(__TASKING__) #pragma warning 586 #else #warning Not supported compiler type #endif typedef struct { __IO uint32_t CPU0; /*!< Configurable priority configuration register for CPU0. */ __IO uint32_t SPIS1; /*!< Configurable priority configuration register for SPIS1. */ __IO uint32_t RADIO; /*!< Configurable priority configuration register for RADIO. */ __IO uint32_t ECB; /*!< Configurable priority configuration register for ECB. */ __IO uint32_t CCM; /*!< Configurable priority configuration register for CCM. */ __IO uint32_t AAR; /*!< Configurable priority configuration register for AAR. */ } AMLI_RAMPRI_Type; typedef struct { __IO uint32_t SCK; /*!< Pin select for SCK. */ __IO uint32_t MOSI; /*!< Pin select for MOSI. */ __IO uint32_t MISO; /*!< Pin select for MISO. */ } SPIM_PSEL_Type; typedef struct { __IO uint32_t PTR; /*!< Data pointer. */ __IO uint32_t MAXCNT; /*!< Maximum number of buffer bytes to receive. */ __I uint32_t AMOUNT; /*!< Number of bytes received in the last transaction. */ } SPIM_RXD_Type; typedef struct { __IO uint32_t PTR; /*!< Data pointer. */ __IO uint32_t MAXCNT; /*!< Maximum number of buffer bytes to send. */ __I uint32_t AMOUNT; /*!< Number of bytes sent in the last transaction. */ } SPIM_TXD_Type; typedef struct { __O uint32_t EN; /*!< Enable channel group. */ __O uint32_t DIS; /*!< Disable channel group. */ } PPI_TASKS_CHG_Type; typedef struct { __IO uint32_t EEP; /*!< Channel event end-point. */ __IO uint32_t TEP; /*!< Channel task end-point. */ } PPI_CH_Type; typedef struct { __I uint32_t PART; /*!< Part code */ __I uint32_t VARIANT; /*!< Part variant */ __I uint32_t PACKAGE; /*!< Package option */ __I uint32_t RAM; /*!< RAM variant */ __I uint32_t FLASH; /*!< Flash variant */ __I uint32_t RESERVED[3]; /*!< Reserved */ } FICR_INFO_Type; /* ================================================================================ */ /* ================ POWER ================ */ /* ================================================================================ */ /** * @brief Power Control. (POWER) */ typedef struct { /*!< POWER Structure */ __I uint32_t RESERVED0[30]; __O uint32_t TASKS_CONSTLAT; /*!< Enable constant latency mode. */ __O uint32_t TASKS_LOWPWR; /*!< Enable low power mode (variable latency). */ __I uint32_t RESERVED1[34]; __IO uint32_t EVENTS_POFWARN; /*!< Power failure warning. */ __I uint32_t RESERVED2[126]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED3[61]; __IO uint32_t RESETREAS; /*!< Reset reason. */ __I uint32_t RESERVED4[9]; __I uint32_t RAMSTATUS; /*!< Ram status register. */ __I uint32_t RESERVED5[53]; __O uint32_t SYSTEMOFF; /*!< System off register. */ __I uint32_t RESERVED6[3]; __IO uint32_t POFCON; /*!< Power failure configuration. */ __I uint32_t RESERVED7[2]; __IO uint32_t GPREGRET; /*!< General purpose retention register. This register is a retained register. */ __I uint32_t RESERVED8; __IO uint32_t RAMON; /*!< Ram on/off. */ __I uint32_t RESERVED9[7]; __IO uint32_t RESET; /*!< Pin reset functionality configuration register. This register is a retained register. */ __I uint32_t RESERVED10[3]; __IO uint32_t RAMONB; /*!< Ram on/off. */ __I uint32_t RESERVED11[8]; __IO uint32_t DCDCEN; /*!< DCDC converter enable configuration register. */ __I uint32_t RESERVED12[291]; __IO uint32_t DCDCFORCE; /*!< DCDC power-up force register. */ } NRF_POWER_Type; /* ================================================================================ */ /* ================ CLOCK ================ */ /* ================================================================================ */ /** * @brief Clock control. (CLOCK) */ typedef struct { /*!< CLOCK Structure */ __O uint32_t TASKS_HFCLKSTART; /*!< Start HFCLK clock source. */ __O uint32_t TASKS_HFCLKSTOP; /*!< Stop HFCLK clock source. */ __O uint32_t TASKS_LFCLKSTART; /*!< Start LFCLK clock source. */ __O uint32_t TASKS_LFCLKSTOP; /*!< Stop LFCLK clock source. */ __O uint32_t TASKS_CAL; /*!< Start calibration of LFCLK RC oscillator. */ __O uint32_t TASKS_CTSTART; /*!< Start calibration timer. */ __O uint32_t TASKS_CTSTOP; /*!< Stop calibration timer. */ __I uint32_t RESERVED0[57]; __IO uint32_t EVENTS_HFCLKSTARTED; /*!< HFCLK oscillator started. */ __IO uint32_t EVENTS_LFCLKSTARTED; /*!< LFCLK oscillator started. */ __I uint32_t RESERVED1; __IO uint32_t EVENTS_DONE; /*!< Calibration of LFCLK RC oscillator completed. */ __IO uint32_t EVENTS_CTTO; /*!< Calibration timer timeout. */ __I uint32_t RESERVED2[124]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED3[63]; __I uint32_t HFCLKRUN; /*!< Task HFCLKSTART trigger status. */ __I uint32_t HFCLKSTAT; /*!< High frequency clock status. */ __I uint32_t RESERVED4; __I uint32_t LFCLKRUN; /*!< Task LFCLKSTART triggered status. */ __I uint32_t LFCLKSTAT; /*!< Low frequency clock status. */ __I uint32_t LFCLKSRCCOPY; /*!< Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */ __I uint32_t RESERVED5[62]; __IO uint32_t LFCLKSRC; /*!< Clock source for the LFCLK clock. */ __I uint32_t RESERVED6[7]; __IO uint32_t CTIV; /*!< Calibration timer interval. */ __I uint32_t RESERVED7[5]; __IO uint32_t XTALFREQ; /*!< Crystal frequency. */ } NRF_CLOCK_Type; /* ================================================================================ */ /* ================ MPU ================ */ /* ================================================================================ */ /** * @brief Memory Protection Unit. (MPU) */ typedef struct { /*!< MPU Structure */ __I uint32_t RESERVED0[330]; __IO uint32_t PERR0; /*!< Configuration of peripherals in mpu regions. */ __IO uint32_t RLENR0; /*!< Length of RAM region 0. */ __I uint32_t RESERVED1[52]; __IO uint32_t PROTENSET0; /*!< Erase and write protection bit enable set register. */ __IO uint32_t PROTENSET1; /*!< Erase and write protection bit enable set register. */ __IO uint32_t DISABLEINDEBUG; /*!< Disable erase and write protection mechanism in debug mode. */ __IO uint32_t PROTBLOCKSIZE; /*!< Erase and write protection block size. */ } NRF_MPU_Type; /* ================================================================================ */ /* ================ PU ================ */ /* ================================================================================ */ /** * @brief Patch unit. (PU) */ typedef struct { /*!< PU Structure */ __I uint32_t RESERVED0[448]; __IO uint32_t REPLACEADDR[8]; /*!< Address of first instruction to replace. */ __I uint32_t RESERVED1[24]; __IO uint32_t PATCHADDR[8]; /*!< Relative address of patch instructions. */ __I uint32_t RESERVED2[24]; __IO uint32_t PATCHEN; /*!< Patch enable register. */ __IO uint32_t PATCHENSET; /*!< Patch enable register. */ __IO uint32_t PATCHENCLR; /*!< Patch disable register. */ } NRF_PU_Type; /* ================================================================================ */ /* ================ AMLI ================ */ /* ================================================================================ */ /** * @brief AHB Multi-Layer Interface. (AMLI) */ typedef struct { /*!< AMLI Structure */ __I uint32_t RESERVED0[896]; AMLI_RAMPRI_Type RAMPRI; /*!< RAM configurable priority configuration structure. */ } NRF_AMLI_Type; /* ================================================================================ */ /* ================ RADIO ================ */ /* ================================================================================ */ /** * @brief The radio. (RADIO) */ typedef struct { /*!< RADIO Structure */ __O uint32_t TASKS_TXEN; /*!< Enable radio in TX mode. */ __O uint32_t TASKS_RXEN; /*!< Enable radio in RX mode. */ __O uint32_t TASKS_START; /*!< Start radio. */ __O uint32_t TASKS_STOP; /*!< Stop radio. */ __O uint32_t TASKS_DISABLE; /*!< Disable radio. */ __O uint32_t TASKS_RSSISTART; /*!< Start the RSSI and take one sample of the receive signal strength. */ __O uint32_t TASKS_RSSISTOP; /*!< Stop the RSSI measurement. */ __O uint32_t TASKS_BCSTART; /*!< Start the bit counter. */ __O uint32_t TASKS_BCSTOP; /*!< Stop the bit counter. */ __I uint32_t RESERVED0[55]; __IO uint32_t EVENTS_READY; /*!< Ready event. */ __IO uint32_t EVENTS_ADDRESS; /*!< Address event. */ __IO uint32_t EVENTS_PAYLOAD; /*!< Payload event. */ __IO uint32_t EVENTS_END; /*!< End event. */ __IO uint32_t EVENTS_DISABLED; /*!< Disable event. */ __IO uint32_t EVENTS_DEVMATCH; /*!< A device address match occurred on the last received packet. */ __IO uint32_t EVENTS_DEVMISS; /*!< No device address match occurred on the last received packet. */ __IO uint32_t EVENTS_RSSIEND; /*!< Sampling of the receive signal strength complete. A new RSSI sample is ready for readout at the RSSISAMPLE register. */ __I uint32_t RESERVED1[2]; __IO uint32_t EVENTS_BCMATCH; /*!< Bit counter reached bit count value specified in BC register. */ __I uint32_t RESERVED2[53]; __IO uint32_t SHORTS; /*!< Shortcuts for the radio. */ __I uint32_t RESERVED3[64]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED4[61]; __I uint32_t CRCSTATUS; /*!< CRC status of received packet. */ __I uint32_t CD; /*!< Carrier detect. */ __I uint32_t RXMATCH; /*!< Received address. */ __I uint32_t RXCRC; /*!< Received CRC. */ __I uint32_t DAI; /*!< Device address match index. */ __I uint32_t RESERVED5[60]; __IO uint32_t PACKETPTR; /*!< Packet pointer. Decision point: START task. */ __IO uint32_t FREQUENCY; /*!< Frequency. */ __IO uint32_t TXPOWER; /*!< Output power. */ __IO uint32_t MODE; /*!< Data rate and modulation. */ __IO uint32_t PCNF0; /*!< Packet configuration 0. */ __IO uint32_t PCNF1; /*!< Packet configuration 1. */ __IO uint32_t BASE0; /*!< Radio base address 0. Decision point: START task. */ __IO uint32_t BASE1; /*!< Radio base address 1. Decision point: START task. */ __IO uint32_t PREFIX0; /*!< Prefixes bytes for logical addresses 0 to 3. */ __IO uint32_t PREFIX1; /*!< Prefixes bytes for logical addresses 4 to 7. */ __IO uint32_t TXADDRESS; /*!< Transmit address select. */ __IO uint32_t RXADDRESSES; /*!< Receive address select. */ __IO uint32_t CRCCNF; /*!< CRC configuration. */ __IO uint32_t CRCPOLY; /*!< CRC polynomial. */ __IO uint32_t CRCINIT; /*!< CRC initial value. */ __IO uint32_t TEST; /*!< Test features enable register. */ __IO uint32_t TIFS; /*!< Inter Frame Spacing in microseconds. */ __I uint32_t RSSISAMPLE; /*!< RSSI sample. */ __I uint32_t RESERVED6; __I uint32_t STATE; /*!< Current radio state. */ __IO uint32_t DATAWHITEIV; /*!< Data whitening initial value. */ __I uint32_t RESERVED7[2]; __IO uint32_t BCC; /*!< Bit counter compare. */ __I uint32_t RESERVED8[39]; __IO uint32_t DAB[8]; /*!< Device address base segment. */ __IO uint32_t DAP[8]; /*!< Device address prefix. */ __IO uint32_t DACNF; /*!< Device address match configuration. */ __I uint32_t RESERVED9[56]; __IO uint32_t OVERRIDE0; /*!< Trim value override register 0. */ __IO uint32_t OVERRIDE1; /*!< Trim value override register 1. */ __IO uint32_t OVERRIDE2; /*!< Trim value override register 2. */ __IO uint32_t OVERRIDE3; /*!< Trim value override register 3. */ __IO uint32_t OVERRIDE4; /*!< Trim value override register 4. */ __I uint32_t RESERVED10[561]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_RADIO_Type; /* ================================================================================ */ /* ================ UART ================ */ /* ================================================================================ */ /** * @brief Universal Asynchronous Receiver/Transmitter. (UART) */ typedef struct { /*!< UART Structure */ __O uint32_t TASKS_STARTRX; /*!< Start UART receiver. */ __O uint32_t TASKS_STOPRX; /*!< Stop UART receiver. */ __O uint32_t TASKS_STARTTX; /*!< Start UART transmitter. */ __O uint32_t TASKS_STOPTX; /*!< Stop UART transmitter. */ __I uint32_t RESERVED0[3]; __O uint32_t TASKS_SUSPEND; /*!< Suspend UART. */ __I uint32_t RESERVED1[56]; __IO uint32_t EVENTS_CTS; /*!< CTS activated. */ __IO uint32_t EVENTS_NCTS; /*!< CTS deactivated. */ __IO uint32_t EVENTS_RXDRDY; /*!< Data received in RXD. */ __I uint32_t RESERVED2[4]; __IO uint32_t EVENTS_TXDRDY; /*!< Data sent from TXD. */ __I uint32_t RESERVED3; __IO uint32_t EVENTS_ERROR; /*!< Error detected. */ __I uint32_t RESERVED4[7]; __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */ __I uint32_t RESERVED5[46]; __IO uint32_t SHORTS; /*!< Shortcuts for UART. */ __I uint32_t RESERVED6[64]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED7[93]; __IO uint32_t ERRORSRC; /*!< Error source. Write error field to 1 to clear error. */ __I uint32_t RESERVED8[31]; __IO uint32_t ENABLE; /*!< Enable UART and acquire IOs. */ __I uint32_t RESERVED9; __IO uint32_t PSELRTS; /*!< Pin select for RTS. */ __IO uint32_t PSELTXD; /*!< Pin select for TXD. */ __IO uint32_t PSELCTS; /*!< Pin select for CTS. */ __IO uint32_t PSELRXD; /*!< Pin select for RXD. */ __I uint32_t RXD; /*!< RXD register. On read action the buffer pointer is displaced. Once read the character is consumed. If read when no character available, the UART will stop working. */ __O uint32_t TXD; /*!< TXD register. */ __I uint32_t RESERVED10; __IO uint32_t BAUDRATE; /*!< UART Baudrate. */ __I uint32_t RESERVED11[17]; __IO uint32_t CONFIG; /*!< Configuration of parity and hardware flow control register. */ __I uint32_t RESERVED12[675]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_UART_Type; /* ================================================================================ */ /* ================ SPI ================ */ /* ================================================================================ */ /** * @brief SPI master 0. (SPI) */ typedef struct { /*!< SPI Structure */ __I uint32_t RESERVED0[66]; __IO uint32_t EVENTS_READY; /*!< TXD byte sent and RXD byte received. */ __I uint32_t RESERVED1[126]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED2[125]; __IO uint32_t ENABLE; /*!< Enable SPI. */ __I uint32_t RESERVED3; __IO uint32_t PSELSCK; /*!< Pin select for SCK. */ __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */ __IO uint32_t PSELMISO; /*!< Pin select for MISO. */ __I uint32_t RESERVED4; __I uint32_t RXD; /*!< RX data. */ __IO uint32_t TXD; /*!< TX data. */ __I uint32_t RESERVED5; __IO uint32_t FREQUENCY; /*!< SPI frequency */ __I uint32_t RESERVED6[11]; __IO uint32_t CONFIG; /*!< Configuration register. */ __I uint32_t RESERVED7[681]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_SPI_Type; /* ================================================================================ */ /* ================ TWI ================ */ /* ================================================================================ */ /** * @brief Two-wire interface master 0. (TWI) */ typedef struct { /*!< TWI Structure */ __O uint32_t TASKS_STARTRX; /*!< Start 2-Wire master receive sequence. */ __I uint32_t RESERVED0; __O uint32_t TASKS_STARTTX; /*!< Start 2-Wire master transmit sequence. */ __I uint32_t RESERVED1[2]; __O uint32_t TASKS_STOP; /*!< Stop 2-Wire transaction. */ __I uint32_t RESERVED2; __O uint32_t TASKS_SUSPEND; /*!< Suspend 2-Wire transaction. */ __O uint32_t TASKS_RESUME; /*!< Resume 2-Wire transaction. */ __I uint32_t RESERVED3[56]; __IO uint32_t EVENTS_STOPPED; /*!< Two-wire stopped. */ __IO uint32_t EVENTS_RXDREADY; /*!< Two-wire ready to deliver new RXD byte received. */ __I uint32_t RESERVED4[4]; __IO uint32_t EVENTS_TXDSENT; /*!< Two-wire finished sending last TXD byte. */ __I uint32_t RESERVED5; __IO uint32_t EVENTS_ERROR; /*!< Two-wire error detected. */ __I uint32_t RESERVED6[4]; __IO uint32_t EVENTS_BB; /*!< Two-wire byte boundary. */ __I uint32_t RESERVED7[3]; __IO uint32_t EVENTS_SUSPENDED; /*!< Two-wire suspended. */ __I uint32_t RESERVED8[45]; __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */ __I uint32_t RESERVED9[64]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED10[110]; __IO uint32_t ERRORSRC; /*!< Two-wire error source. Write error field to 1 to clear error. */ __I uint32_t RESERVED11[14]; __IO uint32_t ENABLE; /*!< Enable two-wire master. */ __I uint32_t RESERVED12; __IO uint32_t PSELSCL; /*!< Pin select for SCL. */ __IO uint32_t PSELSDA; /*!< Pin select for SDA. */ __I uint32_t RESERVED13[2]; __I uint32_t RXD; /*!< RX data register. */ __IO uint32_t TXD; /*!< TX data register. */ __I uint32_t RESERVED14; __IO uint32_t FREQUENCY; /*!< Two-wire frequency. */ __I uint32_t RESERVED15[24]; __IO uint32_t ADDRESS; /*!< Address used in the two-wire transfer. */ __I uint32_t RESERVED16[668]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_TWI_Type; /* ================================================================================ */ /* ================ SPIS ================ */ /* ================================================================================ */ /** * @brief SPI slave 1. (SPIS) */ typedef struct { /*!< SPIS Structure */ __I uint32_t RESERVED0[9]; __O uint32_t TASKS_ACQUIRE; /*!< Acquire SPI semaphore. */ __O uint32_t TASKS_RELEASE; /*!< Release SPI semaphore. */ __I uint32_t RESERVED1[54]; __IO uint32_t EVENTS_END; /*!< Granted transaction completed. */ __I uint32_t RESERVED2[8]; __IO uint32_t EVENTS_ACQUIRED; /*!< Semaphore acquired. */ __I uint32_t RESERVED3[53]; __IO uint32_t SHORTS; /*!< Shortcuts for SPIS. */ __I uint32_t RESERVED4[64]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED5[61]; __I uint32_t SEMSTAT; /*!< Semaphore status. */ __I uint32_t RESERVED6[15]; __IO uint32_t STATUS; /*!< Status from last transaction. */ __I uint32_t RESERVED7[47]; __IO uint32_t ENABLE; /*!< Enable SPIS. */ __I uint32_t RESERVED8; __IO uint32_t PSELSCK; /*!< Pin select for SCK. */ __IO uint32_t PSELMISO; /*!< Pin select for MISO. */ __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */ __IO uint32_t PSELCSN; /*!< Pin select for CSN. */ __I uint32_t RESERVED9[7]; __IO uint32_t RXDPTR; /*!< RX data pointer. */ __IO uint32_t MAXRX; /*!< Maximum number of bytes in the receive buffer. */ __I uint32_t AMOUNTRX; /*!< Number of bytes received in last granted transaction. */ __I uint32_t RESERVED10; __IO uint32_t TXDPTR; /*!< TX data pointer. */ __IO uint32_t MAXTX; /*!< Maximum number of bytes in the transmit buffer. */ __I uint32_t AMOUNTTX; /*!< Number of bytes transmitted in last granted transaction. */ __I uint32_t RESERVED11; __IO uint32_t CONFIG; /*!< Configuration register. */ __I uint32_t RESERVED12; __IO uint32_t DEF; /*!< Default character. */ __I uint32_t RESERVED13[24]; __IO uint32_t ORC; /*!< Over-read character. */ __I uint32_t RESERVED14[654]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_SPIS_Type; /* ================================================================================ */ /* ================ SPIM ================ */ /* ================================================================================ */ /** * @brief SPI master with easyDMA 1. (SPIM) */ typedef struct { /*!< SPIM Structure */ __I uint32_t RESERVED0[4]; __O uint32_t TASKS_START; /*!< Start SPI transaction. */ __O uint32_t TASKS_STOP; /*!< Stop SPI transaction. */ __I uint32_t RESERVED1; __O uint32_t TASKS_SUSPEND; /*!< Suspend SPI transaction. */ __O uint32_t TASKS_RESUME; /*!< Resume SPI transaction. */ __I uint32_t RESERVED2[56]; __IO uint32_t EVENTS_STOPPED; /*!< SPI transaction has stopped. */ __I uint32_t RESERVED3[2]; __IO uint32_t EVENTS_ENDRX; /*!< End of RXD buffer reached. */ __I uint32_t RESERVED4; __IO uint32_t EVENTS_END; /*!< End of RXD buffer and TXD buffer reached. */ __I uint32_t RESERVED5; __IO uint32_t EVENTS_ENDTX; /*!< End of TXD buffer reached. */ __I uint32_t RESERVED6[10]; __IO uint32_t EVENTS_STARTED; /*!< Transaction started. */ __I uint32_t RESERVED7[44]; __IO uint32_t SHORTS; /*!< Shortcuts for SPIM. */ __I uint32_t RESERVED8[64]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED9[125]; __IO uint32_t ENABLE; /*!< Enable SPIM. */ __I uint32_t RESERVED10; SPIM_PSEL_Type PSEL; /*!< Pin select configuration. */ __I uint32_t RESERVED11; __I uint32_t RXDDATA; /*!< RXD register. */ __IO uint32_t TXDDATA; /*!< TXD register. */ __I uint32_t RESERVED12; __IO uint32_t FREQUENCY; /*!< SPI frequency. */ __I uint32_t RESERVED13[3]; SPIM_RXD_Type RXD; /*!< RXD EasyDMA configuration and status. */ __I uint32_t RESERVED14; SPIM_TXD_Type TXD; /*!< TXD EasyDMA configuration and status. */ __I uint32_t RESERVED15; __IO uint32_t CONFIG; /*!< Configuration register. */ __I uint32_t RESERVED16[26]; __IO uint32_t ORC; /*!< Over-read character. */ __I uint32_t RESERVED17[654]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_SPIM_Type; /* ================================================================================ */ /* ================ GPIOTE ================ */ /* ================================================================================ */ /** * @brief GPIO tasks and events. (GPIOTE) */ typedef struct { /*!< GPIOTE Structure */ __O uint32_t TASKS_OUT[4]; /*!< Tasks asssociated with GPIOTE channels. */ __I uint32_t RESERVED0[60]; __IO uint32_t EVENTS_IN[4]; /*!< Tasks asssociated with GPIOTE channels. */ __I uint32_t RESERVED1[27]; __IO uint32_t EVENTS_PORT; /*!< Event generated from multiple pins. */ __I uint32_t RESERVED2[97]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED3[129]; __IO uint32_t CONFIG[4]; /*!< Channel configuration registers. */ __I uint32_t RESERVED4[695]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_GPIOTE_Type; /* ================================================================================ */ /* ================ ADC ================ */ /* ================================================================================ */ /** * @brief Analog to digital converter. (ADC) */ typedef struct { /*!< ADC Structure */ __O uint32_t TASKS_START; /*!< Start an ADC conversion. */ __O uint32_t TASKS_STOP; /*!< Stop ADC. */ __I uint32_t RESERVED0[62]; __IO uint32_t EVENTS_END; /*!< ADC conversion complete. */ __I uint32_t RESERVED1[128]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED2[61]; __I uint32_t BUSY; /*!< ADC busy register. */ __I uint32_t RESERVED3[63]; __IO uint32_t ENABLE; /*!< ADC enable. */ __IO uint32_t CONFIG; /*!< ADC configuration register. */ __I uint32_t RESULT; /*!< Result of ADC conversion. */ __I uint32_t RESERVED4[700]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_ADC_Type; /* ================================================================================ */ /* ================ TIMER ================ */ /* ================================================================================ */ /** * @brief Timer 0. (TIMER) */ typedef struct { /*!< TIMER Structure */ __O uint32_t TASKS_START; /*!< Start Timer. */ __O uint32_t TASKS_STOP; /*!< Stop Timer. */ __O uint32_t TASKS_COUNT; /*!< Increment Timer (In counter mode). */ __O uint32_t TASKS_CLEAR; /*!< Clear timer. */ __O uint32_t TASKS_SHUTDOWN; /*!< Shutdown timer. */ __I uint32_t RESERVED0[11]; __O uint32_t TASKS_CAPTURE[4]; /*!< Capture Timer value to CC[n] registers. */ __I uint32_t RESERVED1[60]; __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */ __I uint32_t RESERVED2[44]; __IO uint32_t SHORTS; /*!< Shortcuts for Timer. */ __I uint32_t RESERVED3[64]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED4[126]; __IO uint32_t MODE; /*!< Timer Mode selection. */ __IO uint32_t BITMODE; /*!< Sets timer behaviour. */ __I uint32_t RESERVED5; __IO uint32_t PRESCALER; /*!< 4-bit prescaler to source clock frequency (max value 9). Source clock frequency is divided by 2^SCALE. */ __I uint32_t RESERVED6[11]; __IO uint32_t CC[4]; /*!< Capture/compare registers. */ __I uint32_t RESERVED7[683]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_TIMER_Type; /* ================================================================================ */ /* ================ RTC ================ */ /* ================================================================================ */ /** * @brief Real time counter 0. (RTC) */ typedef struct { /*!< RTC Structure */ __O uint32_t TASKS_START; /*!< Start RTC Counter. */ __O uint32_t TASKS_STOP; /*!< Stop RTC Counter. */ __O uint32_t TASKS_CLEAR; /*!< Clear RTC Counter. */ __O uint32_t TASKS_TRIGOVRFLW; /*!< Set COUNTER to 0xFFFFFFF0. */ __I uint32_t RESERVED0[60]; __IO uint32_t EVENTS_TICK; /*!< Event on COUNTER increment. */ __IO uint32_t EVENTS_OVRFLW; /*!< Event on COUNTER overflow. */ __I uint32_t RESERVED1[14]; __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */ __I uint32_t RESERVED2[109]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED3[13]; __IO uint32_t EVTEN; /*!< Configures event enable routing to PPI for each RTC event. */ __IO uint32_t EVTENSET; /*!< Enable events routing to PPI. The reading of this register gives the value of EVTEN. */ __IO uint32_t EVTENCLR; /*!< Disable events routing to PPI. The reading of this register gives the value of EVTEN. */ __I uint32_t RESERVED4[110]; __I uint32_t COUNTER; /*!< Current COUNTER value. */ __IO uint32_t PRESCALER; /*!< 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)). Must be written when RTC is STOPed. */ __I uint32_t RESERVED5[13]; __IO uint32_t CC[4]; /*!< Capture/compare registers. */ __I uint32_t RESERVED6[683]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_RTC_Type; /* ================================================================================ */ /* ================ TEMP ================ */ /* ================================================================================ */ /** * @brief Temperature Sensor. (TEMP) */ typedef struct { /*!< TEMP Structure */ __O uint32_t TASKS_START; /*!< Start temperature measurement. */ __O uint32_t TASKS_STOP; /*!< Stop temperature measurement. */ __I uint32_t RESERVED0[62]; __IO uint32_t EVENTS_DATARDY; /*!< Temperature measurement complete, data ready event. */ __I uint32_t RESERVED1[128]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED2[127]; __I int32_t TEMP; /*!< Die temperature in degC, 2's complement format, 0.25 degC pecision. */ __I uint32_t RESERVED3[700]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_TEMP_Type; /* ================================================================================ */ /* ================ RNG ================ */ /* ================================================================================ */ /** * @brief Random Number Generator. (RNG) */ typedef struct { /*!< RNG Structure */ __O uint32_t TASKS_START; /*!< Start the random number generator. */ __O uint32_t TASKS_STOP; /*!< Stop the random number generator. */ __I uint32_t RESERVED0[62]; __IO uint32_t EVENTS_VALRDY; /*!< New random number generated and written to VALUE register. */ __I uint32_t RESERVED1[63]; __IO uint32_t SHORTS; /*!< Shortcuts for the RNG. */ __I uint32_t RESERVED2[64]; __IO uint32_t INTENSET; /*!< Interrupt enable set register */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register */ __I uint32_t RESERVED3[126]; __IO uint32_t CONFIG; /*!< Configuration register. */ __I uint32_t VALUE; /*!< RNG random number. */ __I uint32_t RESERVED4[700]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_RNG_Type; /* ================================================================================ */ /* ================ ECB ================ */ /* ================================================================================ */ /** * @brief AES ECB Mode Encryption. (ECB) */ typedef struct { /*!< ECB Structure */ __O uint32_t TASKS_STARTECB; /*!< Start ECB block encrypt. If a crypto operation is running, this will not initiate a new encryption and the ERRORECB event will be triggered. */ __O uint32_t TASKS_STOPECB; /*!< Stop current ECB encryption. If a crypto operation is running, this will will trigger the ERRORECB event. */ __I uint32_t RESERVED0[62]; __IO uint32_t EVENTS_ENDECB; /*!< ECB block encrypt complete. */ __IO uint32_t EVENTS_ERRORECB; /*!< ECB block encrypt aborted due to a STOPECB task or due to an error. */ __I uint32_t RESERVED1[127]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED2[126]; __IO uint32_t ECBDATAPTR; /*!< ECB block encrypt memory pointer. */ __I uint32_t RESERVED3[701]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_ECB_Type; /* ================================================================================ */ /* ================ AAR ================ */ /* ================================================================================ */ /** * @brief Accelerated Address Resolver. (AAR) */ typedef struct { /*!< AAR Structure */ __O uint32_t TASKS_START; /*!< Start resolving addresses based on IRKs specified in the IRK data structure. */ __I uint32_t RESERVED0; __O uint32_t TASKS_STOP; /*!< Stop resolving addresses. */ __I uint32_t RESERVED1[61]; __IO uint32_t EVENTS_END; /*!< Address resolution procedure completed. */ __IO uint32_t EVENTS_RESOLVED; /*!< Address resolved. */ __IO uint32_t EVENTS_NOTRESOLVED; /*!< Address not resolved. */ __I uint32_t RESERVED2[126]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED3[61]; __I uint32_t STATUS; /*!< Resolution status. */ __I uint32_t RESERVED4[63]; __IO uint32_t ENABLE; /*!< Enable AAR. */ __IO uint32_t NIRK; /*!< Number of Identity root Keys in the IRK data structure. */ __IO uint32_t IRKPTR; /*!< Pointer to the IRK data structure. */ __I uint32_t RESERVED5; __IO uint32_t ADDRPTR; /*!< Pointer to the resolvable address (6 bytes). */ __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage during resolution. A minimum of 3 bytes must be reserved. */ __I uint32_t RESERVED6[697]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_AAR_Type; /* ================================================================================ */ /* ================ CCM ================ */ /* ================================================================================ */ /** * @brief AES CCM Mode Encryption. (CCM) */ typedef struct { /*!< CCM Structure */ __O uint32_t TASKS_KSGEN; /*!< Start generation of key-stream. This operation will stop by itself when completed. */ __O uint32_t TASKS_CRYPT; /*!< Start encrypt/decrypt. This operation will stop by itself when completed. */ __O uint32_t TASKS_STOP; /*!< Stop encrypt/decrypt. */ __I uint32_t RESERVED0[61]; __IO uint32_t EVENTS_ENDKSGEN; /*!< Keystream generation completed. */ __IO uint32_t EVENTS_ENDCRYPT; /*!< Encrypt/decrypt completed. */ __IO uint32_t EVENTS_ERROR; /*!< Error happened. */ __I uint32_t RESERVED1[61]; __IO uint32_t SHORTS; /*!< Shortcuts for the CCM. */ __I uint32_t RESERVED2[64]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED3[61]; __I uint32_t MICSTATUS; /*!< CCM RX MIC check result. */ __I uint32_t RESERVED4[63]; __IO uint32_t ENABLE; /*!< CCM enable. */ __IO uint32_t MODE; /*!< Operation mode. */ __IO uint32_t CNFPTR; /*!< Pointer to a data structure holding AES key and NONCE vector. */ __IO uint32_t INPTR; /*!< Pointer to the input packet. */ __IO uint32_t OUTPTR; /*!< Pointer to the output packet. */ __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage during resolution. A minimum of 43 bytes must be reserved. */ __I uint32_t RESERVED5[697]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_CCM_Type; /* ================================================================================ */ /* ================ WDT ================ */ /* ================================================================================ */ /** * @brief Watchdog Timer. (WDT) */ typedef struct { /*!< WDT Structure */ __O uint32_t TASKS_START; /*!< Start the watchdog. */ __I uint32_t RESERVED0[63]; __IO uint32_t EVENTS_TIMEOUT; /*!< Watchdog timeout. */ __I uint32_t RESERVED1[128]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED2[61]; __I uint32_t RUNSTATUS; /*!< Watchdog running status. */ __I uint32_t REQSTATUS; /*!< Request status. */ __I uint32_t RESERVED3[63]; __IO uint32_t CRV; /*!< Counter reload value in number of 32kiHz clock cycles. */ __IO uint32_t RREN; /*!< Reload request enable. */ __IO uint32_t CONFIG; /*!< Configuration register. */ __I uint32_t RESERVED4[60]; __O uint32_t RR[8]; /*!< Reload requests registers. */ __I uint32_t RESERVED5[631]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_WDT_Type; /* ================================================================================ */ /* ================ QDEC ================ */ /* ================================================================================ */ /** * @brief Rotary decoder. (QDEC) */ typedef struct { /*!< QDEC Structure */ __O uint32_t TASKS_START; /*!< Start the quadrature decoder. */ __O uint32_t TASKS_STOP; /*!< Stop the quadrature decoder. */ __O uint32_t TASKS_READCLRACC; /*!< Transfers the content from ACC registers to ACCREAD registers, and clears the ACC registers. */ __I uint32_t RESERVED0[61]; __IO uint32_t EVENTS_SAMPLERDY; /*!< A new sample is written to the sample register. */ __IO uint32_t EVENTS_REPORTRDY; /*!< REPORTPER number of samples accumulated in ACC register, and ACC register different than zero. */ __IO uint32_t EVENTS_ACCOF; /*!< ACC or ACCDBL register overflow. */ __I uint32_t RESERVED1[61]; __IO uint32_t SHORTS; /*!< Shortcuts for the QDEC. */ __I uint32_t RESERVED2[64]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED3[125]; __IO uint32_t ENABLE; /*!< Enable the QDEC. */ __IO uint32_t LEDPOL; /*!< LED output pin polarity. */ __IO uint32_t SAMPLEPER; /*!< Sample period. */ __I int32_t SAMPLE; /*!< Motion sample value. */ __IO uint32_t REPORTPER; /*!< Number of samples to generate an EVENT_REPORTRDY. */ __I int32_t ACC; /*!< Accumulated valid transitions register. */ __I int32_t ACCREAD; /*!< Snapshot of ACC register. Value generated by the TASKS_READCLEACC task. */ __IO uint32_t PSELLED; /*!< Pin select for LED output. */ __IO uint32_t PSELA; /*!< Pin select for phase A input. */ __IO uint32_t PSELB; /*!< Pin select for phase B input. */ __IO uint32_t DBFEN; /*!< Enable debouncer input filters. */ __I uint32_t RESERVED4[5]; __IO uint32_t LEDPRE; /*!< Time LED is switched ON before the sample. */ __I uint32_t ACCDBL; /*!< Accumulated double (error) transitions register. */ __I uint32_t ACCDBLREAD; /*!< Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC task. */ __I uint32_t RESERVED5[684]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_QDEC_Type; /* ================================================================================ */ /* ================ LPCOMP ================ */ /* ================================================================================ */ /** * @brief Low power comparator. (LPCOMP) */ typedef struct { /*!< LPCOMP Structure */ __O uint32_t TASKS_START; /*!< Start the comparator. */ __O uint32_t TASKS_STOP; /*!< Stop the comparator. */ __O uint32_t TASKS_SAMPLE; /*!< Sample comparator value. */ __I uint32_t RESERVED0[61]; __IO uint32_t EVENTS_READY; /*!< LPCOMP is ready and output is valid. */ __IO uint32_t EVENTS_DOWN; /*!< Input voltage crossed the threshold going down. */ __IO uint32_t EVENTS_UP; /*!< Input voltage crossed the threshold going up. */ __IO uint32_t EVENTS_CROSS; /*!< Input voltage crossed the threshold in any direction. */ __I uint32_t RESERVED1[60]; __IO uint32_t SHORTS; /*!< Shortcuts for the LPCOMP. */ __I uint32_t RESERVED2[64]; __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED3[61]; __I uint32_t RESULT; /*!< Result of last compare. */ __I uint32_t RESERVED4[63]; __IO uint32_t ENABLE; /*!< Enable the LPCOMP. */ __IO uint32_t PSEL; /*!< Input pin select. */ __IO uint32_t REFSEL; /*!< Reference select. */ __IO uint32_t EXTREFSEL; /*!< External reference select. */ __I uint32_t RESERVED5[4]; __IO uint32_t ANADETECT; /*!< Analog detect configuration. */ __I uint32_t RESERVED6[694]; __IO uint32_t POWER; /*!< Peripheral power control. */ } NRF_LPCOMP_Type; /* ================================================================================ */ /* ================ SWI ================ */ /* ================================================================================ */ /** * @brief SW Interrupts. (SWI) */ typedef struct { /*!< SWI Structure */ __I uint32_t UNUSED; /*!< Unused. */ } NRF_SWI_Type; /* ================================================================================ */ /* ================ NVMC ================ */ /* ================================================================================ */ /** * @brief Non Volatile Memory Controller. (NVMC) */ typedef struct { /*!< NVMC Structure */ __I uint32_t RESERVED0[256]; __I uint32_t READY; /*!< Ready flag. */ __I uint32_t RESERVED1[64]; __IO uint32_t CONFIG; /*!< Configuration register. */ __IO uint32_t ERASEPAGE; /*!< Register for erasing a non-protected non-volatile memory page. */ __IO uint32_t ERASEALL; /*!< Register for erasing all non-volatile user memory. */ __IO uint32_t ERASEPROTECTEDPAGE; /*!< Register for erasing a protected non-volatile memory page. */ __IO uint32_t ERASEUICR; /*!< Register for start erasing User Information Congfiguration Registers. */ } NRF_NVMC_Type; /* ================================================================================ */ /* ================ PPI ================ */ /* ================================================================================ */ /** * @brief PPI controller. (PPI) */ typedef struct { /*!< PPI Structure */ PPI_TASKS_CHG_Type TASKS_CHG[4]; /*!< Channel group tasks. */ __I uint32_t RESERVED0[312]; __IO uint32_t CHEN; /*!< Channel enable. */ __IO uint32_t CHENSET; /*!< Channel enable set. */ __IO uint32_t CHENCLR; /*!< Channel enable clear. */ __I uint32_t RESERVED1; PPI_CH_Type CH[16]; /*!< PPI Channel. */ __I uint32_t RESERVED2[156]; __IO uint32_t CHG[4]; /*!< Channel group configuration. */ } NRF_PPI_Type; /* ================================================================================ */ /* ================ FICR ================ */ /* ================================================================================ */ /** * @brief Factory Information Configuration. (FICR) */ typedef struct { /*!< FICR Structure */ __I uint32_t RESERVED0[4]; __I uint32_t CODEPAGESIZE; /*!< Code memory page size in bytes. */ __I uint32_t CODESIZE; /*!< Code memory size in pages. */ __I uint32_t RESERVED1[4]; __I uint32_t CLENR0; /*!< Length of code region 0 in bytes. */ __I uint32_t PPFC; /*!< Pre-programmed factory code present. */ __I uint32_t RESERVED2; __I uint32_t NUMRAMBLOCK; /*!< Number of individualy controllable RAM blocks. */ union { __I uint32_t SIZERAMBLOCK[4]; /*!< Deprecated array of size of RAM block in bytes. This name is kept for backward compatinility purposes. Use SIZERAMBLOCKS instead. */ __I uint32_t SIZERAMBLOCKS; /*!< Size of RAM blocks in bytes. */ }; __I uint32_t RESERVED3[5]; __I uint32_t CONFIGID; /*!< Configuration identifier. */ __I uint32_t DEVICEID[2]; /*!< Device identifier. */ __I uint32_t RESERVED4[6]; __I uint32_t ER[4]; /*!< Encryption root. */ __I uint32_t IR[4]; /*!< Identity root. */ __I uint32_t DEVICEADDRTYPE; /*!< Device address type. */ __I uint32_t DEVICEADDR[2]; /*!< Device address. */ __I uint32_t OVERRIDEEN; /*!< Radio calibration override enable. */ __I uint32_t NRF_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for NRF_1Mbit mode. */ __I uint32_t RESERVED5[10]; __I uint32_t BLE_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for BLE_1Mbit mode. */ FICR_INFO_Type INFO; /*!< Device info */ } NRF_FICR_Type; /* ================================================================================ */ /* ================ UICR ================ */ /* ================================================================================ */ /** * @brief User Information Configuration. (UICR) */ typedef struct { /*!< UICR Structure */ __IO uint32_t CLENR0; /*!< Length of code region 0. */ __IO uint32_t RBPCONF; /*!< Readback protection configuration. */ __IO uint32_t XTALFREQ; /*!< Reset value for CLOCK XTALFREQ register. */ __I uint32_t RESERVED0; __I uint32_t FWID; /*!< Firmware ID. */ __IO uint32_t BOOTLOADERADDR; /*!< Bootloader start address. */ } NRF_UICR_Type; /* ================================================================================ */ /* ================ GPIO ================ */ /* ================================================================================ */ /** * @brief General purpose input and output. (GPIO) */ typedef struct { /*!< GPIO Structure */ __I uint32_t RESERVED0[321]; __IO uint32_t OUT; /*!< Write GPIO port. */ __IO uint32_t OUTSET; /*!< Set individual bits in GPIO port. */ __IO uint32_t OUTCLR; /*!< Clear individual bits in GPIO port. */ __I uint32_t IN; /*!< Read GPIO port. */ __IO uint32_t DIR; /*!< Direction of GPIO pins. */ __IO uint32_t DIRSET; /*!< DIR set register. */ __IO uint32_t DIRCLR; /*!< DIR clear register. */ __I uint32_t RESERVED1[120]; __IO uint32_t PIN_CNF[32]; /*!< Configuration of GPIO pins. */ } NRF_GPIO_Type; /* -------------------- End of section using anonymous unions ------------------- */ #if defined(__CC_ARM) #pragma pop #elif defined(__ICCARM__) /* leave anonymous unions enabled */ #elif defined(__GNUC__) /* anonymous unions are enabled by default */ #elif defined(__TMS470__) /* anonymous unions are enabled by default */ #elif defined(__TASKING__) #pragma warning restore #else #warning Not supported compiler type #endif /* ================================================================================ */ /* ================ Peripheral memory map ================ */ /* ================================================================================ */ #define NRF_POWER_BASE 0x40000000UL #define NRF_CLOCK_BASE 0x40000000UL #define NRF_MPU_BASE 0x40000000UL #define NRF_PU_BASE 0x40000000UL #define NRF_AMLI_BASE 0x40000000UL #define NRF_RADIO_BASE 0x40001000UL #define NRF_UART0_BASE 0x40002000UL #define NRF_SPI0_BASE 0x40003000UL #define NRF_TWI0_BASE 0x40003000UL #define NRF_SPI1_BASE 0x40004000UL #define NRF_TWI1_BASE 0x40004000UL #define NRF_SPIS1_BASE 0x40004000UL #define NRF_SPIM1_BASE 0x40004000UL #define NRF_GPIOTE_BASE 0x40006000UL #define NRF_ADC_BASE 0x40007000UL #define NRF_TIMER0_BASE 0x40008000UL #define NRF_TIMER1_BASE 0x40009000UL #define NRF_TIMER2_BASE 0x4000A000UL #define NRF_RTC0_BASE 0x4000B000UL #define NRF_TEMP_BASE 0x4000C000UL #define NRF_RNG_BASE 0x4000D000UL #define NRF_ECB_BASE 0x4000E000UL #define NRF_AAR_BASE 0x4000F000UL #define NRF_CCM_BASE 0x4000F000UL #define NRF_WDT_BASE 0x40010000UL #define NRF_RTC1_BASE 0x40011000UL #define NRF_QDEC_BASE 0x40012000UL #define NRF_LPCOMP_BASE 0x40013000UL #define NRF_SWI_BASE 0x40014000UL #define NRF_NVMC_BASE 0x4001E000UL #define NRF_PPI_BASE 0x4001F000UL #define NRF_FICR_BASE 0x10000000UL #define NRF_UICR_BASE 0x10001000UL #define NRF_GPIO_BASE 0x50000000UL /* ================================================================================ */ /* ================ Peripheral declaration ================ */ /* ================================================================================ */ #define NRF_POWER ((NRF_POWER_Type *) NRF_POWER_BASE) #define NRF_CLOCK ((NRF_CLOCK_Type *) NRF_CLOCK_BASE) #define NRF_MPU ((NRF_MPU_Type *) NRF_MPU_BASE) #define NRF_PU ((NRF_PU_Type *) NRF_PU_BASE) #define NRF_AMLI ((NRF_AMLI_Type *) NRF_AMLI_BASE) #define NRF_RADIO ((NRF_RADIO_Type *) NRF_RADIO_BASE) #define NRF_UART0 ((NRF_UART_Type *) NRF_UART0_BASE) #define NRF_SPI0 ((NRF_SPI_Type *) NRF_SPI0_BASE) #define NRF_TWI0 ((NRF_TWI_Type *) NRF_TWI0_BASE) #define NRF_SPI1 ((NRF_SPI_Type *) NRF_SPI1_BASE) #define NRF_TWI1 ((NRF_TWI_Type *) NRF_TWI1_BASE) #define NRF_SPIS1 ((NRF_SPIS_Type *) NRF_SPIS1_BASE) #define NRF_SPIM1 ((NRF_SPIM_Type *) NRF_SPIM1_BASE) #define NRF_GPIOTE ((NRF_GPIOTE_Type *) NRF_GPIOTE_BASE) #define NRF_ADC ((NRF_ADC_Type *) NRF_ADC_BASE) #define NRF_TIMER0 ((NRF_TIMER_Type *) NRF_TIMER0_BASE) #define NRF_TIMER1 ((NRF_TIMER_Type *) NRF_TIMER1_BASE) #define NRF_TIMER2 ((NRF_TIMER_Type *) NRF_TIMER2_BASE) #define NRF_RTC0 ((NRF_RTC_Type *) NRF_RTC0_BASE) #define NRF_TEMP ((NRF_TEMP_Type *) NRF_TEMP_BASE) #define NRF_RNG ((NRF_RNG_Type *) NRF_RNG_BASE) #define NRF_ECB ((NRF_ECB_Type *) NRF_ECB_BASE) #define NRF_AAR ((NRF_AAR_Type *) NRF_AAR_BASE) #define NRF_CCM ((NRF_CCM_Type *) NRF_CCM_BASE) #define NRF_WDT ((NRF_WDT_Type *) NRF_WDT_BASE) #define NRF_RTC1 ((NRF_RTC_Type *) NRF_RTC1_BASE) #define NRF_QDEC ((NRF_QDEC_Type *) NRF_QDEC_BASE) #define NRF_LPCOMP ((NRF_LPCOMP_Type *) NRF_LPCOMP_BASE) #define NRF_SWI ((NRF_SWI_Type *) NRF_SWI_BASE) #define NRF_NVMC ((NRF_NVMC_Type *) NRF_NVMC_BASE) #define NRF_PPI ((NRF_PPI_Type *) NRF_PPI_BASE) #define NRF_FICR ((NRF_FICR_Type *) NRF_FICR_BASE) #define NRF_UICR ((NRF_UICR_Type *) NRF_UICR_BASE) #define NRF_GPIO ((NRF_GPIO_Type *) NRF_GPIO_BASE) /** @} */ /* End of group Device_Peripheral_Registers */ /** @} */ /* End of group nRF51 */ /** @} */ /* End of group Nordic Semiconductor */ #ifdef __cplusplus } #endif #endif /* nRF51_H */