File content as of revision 579:53297373a894:

/**
  ******************************************************************************
  * @file    stm32l1xx_hal_rcc_ex.c
  * @author  MCD Application Team
  * @version V1.0.0
  * @date    5-September-2014
  * @brief   Extended RCC HAL module driver.
  *    
  *          This file provides firmware functions to manage the following 
  *          functionalities RCC extension peripheral:
  *           + Extended Peripheral Control functions
  *  
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************  
  */ 

/* Includes ------------------------------------------------------------------*/
#include "stm32l1xx_hal.h"

/** @addtogroup STM32L1xx_HAL_Driver
  * @{
  */

/** @defgroup RCCEx RCCEx
  * @brief RCC Extension HAL module driver
  * @{
  */

#ifdef HAL_RCC_MODULE_ENABLED

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/

/** @defgroup RCCEx_Private_Functions RCCEx Exported Functions
  * @{
  */

/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions 
 *  @brief  Extended Peripheral Control functions  
 *
@verbatim   
 ===============================================================================
                ##### Extended Peripheral Control functions  #####
 ===============================================================================  
    [..]
    This subsection provides a set of functions allowing to control the RCC Clocks 
    frequencies.
    [..] 
    (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
        select the RTC clock source; in this case the Backup domain will be reset in  
        order to modify the RTC Clock source, as consequence RTC registers (including 
        the backup registers) and RCC_BDCR register are set to their reset values.
      
@endverbatim
  * @{
  */

/**
  * @brief  Initializes the RCC extended peripherals clocks according to the specified parameters in the
  *         RCC_PeriphCLKInitTypeDef.
  * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
  *         contains the configuration information for the Extended Peripherals clocks(RTC/LCD clock).
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
{
  uint32_t tickstart = 0;   
  uint32_t tmpreg = 0;

  /* Check the parameters */
  assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
  
  /*------------------------------- RTC/LCD Configuration ------------------------*/ 
  if ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) 
#if defined (STM32L100xB) || defined (STM32L100xBA) || defined (STM32L100xC) ||\
    defined(STM32L152xB) || defined(STM32L152xBA) || defined(STM32L152xC) || \
    defined(STM32L162xC) || defined(STM32L152xCA) || defined(STM32L152xD) || \
    defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L152xE) || \
    defined(STM32L162xE)
    || (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LCD) == RCC_PERIPHCLK_LCD)
#endif /* STM32L100xB || STM32L152xBA || ... || STM32L152xE || STM32L162xE */
    )
    {
    /* Enable Power Controller clock */
    __PWR_CLK_ENABLE();
    
    /* Enable write access to Backup domain */
    SET_BIT(PWR->CR, PWR_CR_DBP);

    /* Wait for Backup domain Write protection disable */
    tickstart = HAL_GetTick();
    
    while((PWR->CR & PWR_CR_DBP) == RESET)
    {
      if((HAL_GetTick() - tickstart ) > DBP_TIMEOUT_VALUE)
      {
        return HAL_TIMEOUT;
      }      
    }
    
    tmpreg = (RCC->CSR & RCC_CSR_RTCSEL);
    /* Reset the Backup domain only if the RTC Clock source selection is modified */ 
    if((tmpreg != (PeriphClkInit->RTCClockSelection & RCC_CSR_RTCSEL))
#if defined (STM32L100xB) || defined (STM32L100xBA) || defined (STM32L100xC) ||\
    defined(STM32L152xB) || defined(STM32L152xBA) || defined(STM32L152xC) || \
    defined(STM32L162xC) || defined(STM32L152xCA) || defined(STM32L152xD) || \
    defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L152xE) || \
    defined(STM32L162xE)
    || (tmpreg != (PeriphClkInit->LCDClockSelection & RCC_CSR_RTCSEL))
#endif /* STM32L100xB || STM32L152xBA || ... || STM32L152xE || STM32L162xE */
    )
    {
      /* Store the content of CSR register before the reset of Backup Domain */
      tmpreg = (RCC->CSR & ~(RCC_CSR_RTCSEL));
      /* RTC Clock selection can be changed only if the Backup Domain is reset */
      __HAL_RCC_BACKUPRESET_FORCE();
      __HAL_RCC_BACKUPRESET_RELEASE();
      /* Restore the Content of CSR register */
      RCC->CSR = tmpreg;
    }

    /* If LSE is selected as RTC clock source, wait for LSE reactivation */
    if ((PeriphClkInit->RTCClockSelection == RCC_RTCCLKSOURCE_LSE)
#if defined (STM32L100xB) || defined (STM32L100xBA) || defined (STM32L100xC) ||\
    defined(STM32L152xB) || defined(STM32L152xBA) || defined(STM32L152xC) || \
    defined(STM32L162xC) || defined(STM32L152xCA) || defined(STM32L152xD) || \
    defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L152xE) || \
    defined(STM32L162xE)
    || (PeriphClkInit->LCDClockSelection == RCC_RTCCLKSOURCE_LSE)
#endif /* STM32L100xB || STM32L152xBA || ... || STM32L152xE || STM32L162xE */
      )
    {
      /* Get timeout */   
      tickstart = HAL_GetTick();
      
      /* Wait till LSE is ready */  
      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
      {
        if((HAL_GetTick() - tickstart ) > LSE_TIMEOUT_VALUE)
        {
          return HAL_TIMEOUT;
        }      
      }  
    }

    __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
  }

  return HAL_OK;
}

/**
  * @brief  Get the PeriphClkInit according to the internal
  * RCC configuration registers.
  * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that 
  *         returns the configuration information for the Extended Peripherals clocks(RTC/LCD clocks).
  * @retval None
  */
void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
{
  uint32_t srcclk = 0;
  
  /* Set all possible values for the extended clock type parameter------------*/
  PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_RTC;
#if defined (STM32L100xB) || defined (STM32L100xBA) || defined (STM32L100xC) ||\
    defined(STM32L152xB) || defined(STM32L152xBA) || defined(STM32L152xC) || \
    defined(STM32L162xC) || defined(STM32L152xCA) || defined(STM32L152xD) || \
    defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L152xE) || \
    defined(STM32L162xE)
  PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_LCD;
#endif /* STM32L100xB || STM32L152xBA || ... || STM32L152xE || STM32L162xE */

  /* Get the RTC/LCD configuration -----------------------------------------------*/
  srcclk = __HAL_RCC_GET_RTC_SOURCE();
  if (srcclk != RCC_RTCCLKSOURCE_HSE_DIV2)
  {
    /* Source clock is LSE or LSI*/
    PeriphClkInit->RTCClockSelection = srcclk;
  }
  else
  {
    /* Source clock is HSE. Need to get the prescaler value*/
    PeriphClkInit->RTCClockSelection = srcclk | (READ_BIT(RCC->CR, RCC_CR_RTCPRE));
  }
#if defined (STM32L100xB) || defined (STM32L100xBA) || defined (STM32L100xC) ||\
    defined(STM32L152xB) || defined(STM32L152xBA) || defined(STM32L152xC) || \
    defined(STM32L162xC) || defined(STM32L152xCA) || defined(STM32L152xD) || \
    defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L152xE) || \
    defined(STM32L162xE)
  PeriphClkInit->LCDClockSelection = PeriphClkInit->RTCClockSelection;
#endif /* STM32L100xB || STM32L152xBA || ... || STM32L152xE || STM32L162xE */
}

#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || \
    defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || \
    defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || \
    defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE)

/**
  * @brief  Enables the LSE Clock Security System.
  * @note   If a failure is detected on the external 32 kHz oscillator, the LSE clock is no longer supplied
  *         to the RTC but no hardware action is made to the registers.
  *         In Standby mode a wakeup is generated. In other modes an interrupt can be sent to wakeup
  *         the software (see Section 5.3.4: Clock interrupt register (RCC_CIR) on page 104).
  *         The software MUST then disable the LSECSSON bit, stop the defective 32 kHz oscillator
  *         (disabling LSEON), and can change the RTC clock source (no clock or LSI or HSE, with
  *         RTCSEL), or take any required action to secure the application.  
  * @note   LSE CSS available only for high density and medium+ devices
  * @retval None
  */
void HAL_RCCEx_EnableLSECSS(void)
{
  *(__IO uint32_t *) CSR_LSECSSON_BB = (uint32_t)ENABLE;
}

/**
  * @brief  Disables the LSE Clock Security System.
  * @note   Once enabled this bit cannot be disabled, except after an LSE failure detection 
  *         (LSECSSD=1). In that case the software MUST disable the LSECSSON bit.
  *         Reset by power on reset and RTC software reset (RTCRST bit).
  * @note   LSE CSS available only for high density and medium+ devices
  * @retval None
  */
void HAL_RCCEx_DisableLSECSS(void)
{
  *(__IO uint32_t *) CSR_LSECSSON_BB = (uint32_t)DISABLE;
}
#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */
  
/**
  * @}
  */

/**
  * @}
  */

#endif /* HAL_RCC_MODULE_ENABLED */
/**
  * @}
  */

/**
  * @}
  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/