USB device stack
Dependents: mbed-mX-USB-TEST1 USBMSD_SD_HID_HelloWorld HidTest MIDI_usb_bridge ... more
Legacy Warning
This is an mbed 2 library. To learn more about mbed OS 5, visit the docs.
Pull requests against this repository are no longer supported. Please raise against mbed OS 5 as documented above.
Diff: targets/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/src/common/usb1_function_dataio.c
- Revision:
- 71:53949e6131f6
diff -r 2c525a50f1b6 -r 53949e6131f6 targets/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/src/common/usb1_function_dataio.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/src/common/usb1_function_dataio.c Thu Jul 27 12:14:04 2017 +0100 @@ -0,0 +1,2932 @@ +/******************************************************************************* +* DISCLAIMER +* This software is supplied by Renesas Electronics Corporation and is only +* intended for use with Renesas products. No other uses are authorized. This +* software is owned by Renesas Electronics Corporation and is protected under +* all applicable laws, including copyright laws. +* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING +* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT +* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE +* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. +* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS +* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE +* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR +* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE +* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. +* Renesas reserves the right, without notice, to make changes to this software +* and to discontinue the availability of this software. By using this software, +* you agree to the additional terms and conditions found by accessing the +* following link: +* http://www.renesas.com/disclaimer +* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved. +*******************************************************************************/ +/******************************************************************************* +* File Name : usb1_function_dataio.c +* $Rev: 1116 $ +* $Date:: 2014-07-09 16:29:19 +0900#$ +* Device(s) : RZ/A1H +* Tool-Chain : +* OS : None +* H/W Platform : +* Description : RZ/A1H R7S72100 USB Sample Program +* Operation : +* Limitations : +*******************************************************************************/ + + +/******************************************************************************* +Includes <System Includes> , "Project Includes" +*******************************************************************************/ +#include "usb1_function.h" + + +/******************************************************************************* +Typedef definitions +*******************************************************************************/ + + +/******************************************************************************* +Macro definitions +*******************************************************************************/ + + +/******************************************************************************* +Imported global variables and functions (from other files) +*******************************************************************************/ + + +/******************************************************************************* +Exported global variables and functions (to be accessed by other files) +*******************************************************************************/ + + +/******************************************************************************* +Private global variables and functions +*******************************************************************************/ +static uint16_t g_usb1_function_mbw[(USB_FUNCTION_MAX_PIPE_NO + 1)]; + +static void usb1_function_start_receive_trns_c(uint16_t pipe, uint32_t size, uint8_t *data); +static void usb1_function_start_receive_trns_d0(uint16_t pipe, uint32_t size, uint8_t *data); +static void usb1_function_start_receive_trns_d1(uint16_t pipe, uint32_t size, uint8_t *data); +static void usb1_function_start_receive_dma_d0(uint16_t pipe, uint32_t size, uint8_t *data); +static void usb1_function_start_receive_dma_d1(uint16_t pipe, uint32_t size, uint8_t *data); +static uint16_t usb1_function_read_dma_d0(uint16_t pipe); +static uint16_t usb1_function_read_dma_d1(uint16_t pipe); +static uint16_t usb1_function_write_dma_d0(uint16_t pipe); +static uint16_t usb1_function_write_dma_d1(uint16_t pipe); + +static void usb1_function_read_c_fifo(uint16_t pipe, uint16_t count); +static void usb1_function_write_c_fifo(uint16_t Pipe, uint16_t count); +static void usb1_function_read_d0_fifo(uint16_t pipe, uint16_t count); +static void usb1_function_write_d0_fifo(uint16_t pipe, uint16_t count); +static void usb1_function_read_d1_fifo(uint16_t pipe, uint16_t count); +static void usb1_function_write_d1_fifo(uint16_t pipe, uint16_t count); + +static void usb1_function_clear_transaction_counter(uint16_t pipe); +static void usb1_function_set_transaction_counter(uint16_t pipe, uint32_t count); + +static uint32_t usb1_function_com_get_dmasize(uint32_t trncount, uint32_t dtptr); + +static uint16_t usb1_function_set_dfacc_d0(uint16_t mbw, uint32_t count); +static uint16_t usb1_function_set_dfacc_d1(uint16_t mbw, uint32_t count); + + +/******************************************************************************* +* Function Name: usb1_function_start_send_transfer +* Description : Starts the USB data communication using pipe specified by the argument. +* Arguments : uint16_t pipe ; Pipe Number +* : uint32_t size ; Data Size +* : uint8_t *data ; Data Address +* Return Value : DEVDRV_USBF_WRITEEND ; Write end +* : DEVDRV_USBF_WRITESHRT ; short data +* : DEVDRV_USBF_WRITING ; Continue of data write +* : DEVDRV_USBF_WRITEDMA ; Write DMA +* : DEVDRV_USBF_FIFOERROR ; FIFO status +*******************************************************************************/ +uint16_t usb1_function_start_send_transfer (uint16_t pipe, uint32_t size, uint8_t * data) +{ + uint16_t status; + uint16_t usefifo; + uint16_t mbw; + + g_usb1_function_data_count[pipe] = size; + g_usb1_function_data_pointer[pipe] = (uint8_t *)data; + g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT; + + usb1_function_clear_bemp_sts(pipe); + usb1_function_clear_brdy_sts(pipe); + usb1_function_clear_nrdy_sts(pipe); + + mbw = usb1_function_get_mbw(size, (uint32_t)data); + + usefifo = (uint16_t)(g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE); + + switch (usefifo) + { + case USB_FUNCTION_D0FIFO_USE: + case USB_FUNCTION_D0FIFO_DMA: + usefifo = USB_FUNCTION_D0USE; + break; + + case USB_FUNCTION_D1FIFO_USE: + case USB_FUNCTION_D1FIFO_DMA: + usefifo = USB_FUNCTION_D1USE; + break; + + default: + usefifo = USB_FUNCTION_CUSE; + break; + }; + + usb1_function_set_curpipe(USB_FUNCTION_PIPE0, usefifo, DEVDRV_USBF_NO, mbw); + + usb1_function_clear_transaction_counter(pipe); + + usb1_function_aclrm(pipe); + + status = usb1_function_write_buffer(pipe); + + if (status != DEVDRV_USBF_FIFOERROR) + { + usb1_function_set_pid_buf(pipe); + } + + return status; +} + +/******************************************************************************* +* Function Name: usb1_function_write_buffer +* Description : Writes data in the buffer allocated in the pipe specified by +* : the argument. The FIFO for using is set in the pipe definition table. +* Arguments : uint16_t pipe ; Pipe Number +* Return Value : DEVDRV_USBF_WRITEEND ; Write end +* : DEVDRV_USBF_WRITESHRT ; short data +* : DEVDRV_USBF_WRITING ; Continue of data write +* : DEVDRV_USBF_WRITEDMA ; Write DMA +* : DEVDRV_USBF_FIFOERROR ; FIFO status +*******************************************************************************/ +uint16_t usb1_function_write_buffer (uint16_t pipe) +{ + uint16_t status; + uint16_t usefifo; + + g_usb1_function_PipeIgnore[pipe] = 0; + usefifo = (uint16_t)(g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE); + + switch (usefifo) + { + case USB_FUNCTION_D0FIFO_USE: + status = usb1_function_write_buffer_d0(pipe); + break; + + case USB_FUNCTION_D1FIFO_USE: + status = usb1_function_write_buffer_d1(pipe); + break; + + case USB_FUNCTION_D0FIFO_DMA: + status = usb1_function_write_dma_d0(pipe); + break; + + case USB_FUNCTION_D1FIFO_DMA: + status = usb1_function_write_dma_d1(pipe); + break; + + default: + status = usb1_function_write_buffer_c(pipe); + break; + }; + + switch (status) + { + case DEVDRV_USBF_WRITING: /* Continue of data write */ + usb1_function_enable_nrdy_int(pipe); /* Error (NORES or STALL) */ + usb1_function_enable_brdy_int(pipe); /* Enable Ready Interrupt */ + break; + + case DEVDRV_USBF_WRITEEND: /* End of data write */ + case DEVDRV_USBF_WRITESHRT: /* End of data write */ + usb1_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */ + usb1_function_clear_nrdy_sts(pipe); + usb1_function_enable_nrdy_int(pipe); /* Error (NORES or STALL) */ + /* for last transfer */ + usb1_function_enable_bemp_int(pipe); /* Enable Empty Interrupt */ + break; + + case DEVDRV_USBF_WRITEDMA: /* DMA write */ + usb1_function_clear_nrdy_sts(pipe); + usb1_function_enable_nrdy_int(pipe); /* Error (NORES or STALL) */ + break; + + case DEVDRV_USBF_FIFOERROR: /* FIFO access status */ + default: + usb1_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */ + usb1_function_disable_bemp_int(pipe); /* Disable Empty Interrupt */ + g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_FIFOERROR; + break; + } + + return status; /* End or Err or Continue */ +} + +/******************************************************************************* +* Function Name: usb1_function_write_buffer_c +* Description : Writes data in the buffer allocated in the pipe specified in +* : the argument. Writes data by CPU transfer using CFIFO. +* Arguments : uint16_t pipe ; Pipe Number +* Return Value : DEVDRV_USBF_WRITEEND ; Write end +* : DEVDRV_USBF_WRITESHRT ; short data +* : DEVDRV_USBF_WRITING ; Continue of data write +* : DEVDRV_USBF_WRITEDMA ; Write DMA +* : DEVDRV_USBF_FIFOERROR ; FIFO status +*******************************************************************************/ +uint16_t usb1_function_write_buffer_c (uint16_t pipe) +{ + uint32_t count; + uint16_t size; + uint16_t buffer; + uint16_t mxps; + uint16_t status; + uint16_t mbw; + + if (g_usb1_function_CtrZeroLengthFlag == 1) + { + g_usb1_function_CtrZeroLengthFlag = 0; /* Zero Length Packet Flag CLR */ + return DEVDRV_USBF_WRITEEND; + } + + mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]); + if (pipe == USB_FUNCTION_PIPE0) + { + buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_CUSE, USB_FUNCTION_CFIFO_WRITE, mbw); + } + else + { + buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_CUSE, DEVDRV_USBF_NO, mbw); + } + + if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */ + { + return DEVDRV_USBF_FIFOERROR; + } + + size = usb1_function_get_buf_size(pipe); /* Data buffer size */ + mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */ + + if (g_usb1_function_data_count[pipe] <= (uint32_t)size) + { + status = DEVDRV_USBF_WRITEEND; /* write continues */ + count = g_usb1_function_data_count[pipe]; + + if (count == 0) + { + status = DEVDRV_USBF_WRITESHRT; /* Null Packet is end of write */ + } + + if ((count % mxps) != 0) + { + status = DEVDRV_USBF_WRITESHRT; /* Short Packet is end of write */ + } + } + else + { + status = DEVDRV_USBF_WRITING; /* write continues */ + count = (uint32_t)size; + } + + usb1_function_write_c_fifo(pipe, (uint16_t)count); + + if (g_usb1_function_data_count[pipe] < (uint32_t)size) + { + g_usb1_function_data_count[pipe] = 0; + + if (RZA_IO_RegRead_16(&USB201.CFIFOCTR, USB_CFIFOCTR_BVAL_SHIFT, USB_CFIFOCTR_BVAL) == 0) + { + USB201.CFIFOCTR = USB_FUNCTION_BITBVAL; /* Short Packet */ + g_usb1_function_CtrZeroLengthFlag = 1; /* Zero Length Packet Flag */ + } + } + else + { + g_usb1_function_data_count[pipe] -= count; + } + + return status; /* End or Err or Continue */ +} + +/******************************************************************************* +* Function Name: usb1_function_write_buffer_d0 +* Description : Writes data in the buffer allocated in the pipe specified in the argument. +* : Writes data by CPU transfer using D0FIFO. +* Arguments : uint16_t pipe ; Pipe Number +* Return Value : DEVDRV_USBF_WRITEEND ; Write end +* : DEVDRV_USBF_WRITESHRT ; short data +* : DEVDRV_USBF_WRITING ; Continue of data write +* : DEVDRV_USBF_WRITEDMA ; Write DMA +* : DEVDRV_USBF_FIFOERROR ; FIFO status +*******************************************************************************/ +uint16_t usb1_function_write_buffer_d0 (uint16_t pipe) +{ + uint32_t count; + uint16_t size; + uint16_t buffer; + uint16_t mxps; + uint16_t status; + uint16_t mbw; + + mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]); + buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_D0USE, DEVDRV_USBF_NO, mbw); + if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */ + { + return DEVDRV_USBF_FIFOERROR; + } + + size = usb1_function_get_buf_size(pipe); /* Data buffer size */ + mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */ + + if (g_usb1_function_data_count[pipe] <= (uint32_t)size) + { + status = DEVDRV_USBF_WRITEEND; /* write continues */ + count = g_usb1_function_data_count[pipe]; + + if (count == 0) + { + status = DEVDRV_USBF_WRITESHRT; /* Null Packet is end of write */ + } + + if ((count % mxps) != 0) + { + status = DEVDRV_USBF_WRITESHRT; /* Short Packet is end of write */ + } + } + else + { + status = DEVDRV_USBF_WRITING; /* write continues */ + count = (uint32_t)size; + } + + usb1_function_write_d0_fifo(pipe, (uint16_t)count); + + if (g_usb1_function_data_count[pipe] < (uint32_t)size) + { + g_usb1_function_data_count[pipe] = 0; + if (RZA_IO_RegRead_16(&USB201.D0FIFOCTR, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL) == 0) + { + USB201.D0FIFOCTR = USB_FUNCTION_BITBVAL; /* Short Packet */ + } + } + else + { + g_usb1_function_data_count[pipe] -= count; + } + + return status; /* End or Err or Continue */ +} + +/******************************************************************************* +* Function Name: usb1_function_write_buffer_d1 +* Description : Writes data in the buffer allocated in the pipe specified in the argument. +* : Writes data by CPU transfer using D1FIFO. +* Arguments : uint16_t pipe ; Pipe Number +* Return Value : DEVDRV_USBF_WRITEEND ; Write end +* : DEVDRV_USBF_WRITESHRT ; short data +* : DEVDRV_USBF_WRITING ; Continue of data write +* : DEVDRV_USBF_WRITEDMA ; Write DMA +* : DEVDRV_USBF_FIFOERROR ; FIFO status +*******************************************************************************/ +uint16_t usb1_function_write_buffer_d1 (uint16_t pipe) +{ + uint32_t count; + uint16_t size; + uint16_t buffer; + uint16_t mxps; + uint16_t status; + uint16_t mbw; + + mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]); + buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_D1USE, DEVDRV_USBF_NO, mbw); + + if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */ + { + return DEVDRV_USBF_FIFOERROR; + } + + size = usb1_function_get_buf_size(pipe); /* Data buffer size */ + mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */ + + if (g_usb1_function_data_count[pipe] <= (uint32_t)size) + { + status = DEVDRV_USBF_WRITEEND; /* write continues */ + count = g_usb1_function_data_count[pipe]; + + if (count == 0) + { + status = DEVDRV_USBF_WRITESHRT; /* Null Packet is end of write */ + } + + if ((count % mxps) != 0) + { + status = DEVDRV_USBF_WRITESHRT; /* Short Packet is end of write */ + } + } + else + { + status = DEVDRV_USBF_WRITING; /* write continues */ + count = (uint32_t)size; + } + + usb1_function_write_d1_fifo(pipe, (uint16_t)count); + + if (g_usb1_function_data_count[pipe] < (uint32_t)size) + { + g_usb1_function_data_count[pipe] = 0; + + if (RZA_IO_RegRead_16(&USB201.D1FIFOCTR, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL) == 0) + { + USB201.D1FIFOCTR = USB_FUNCTION_BITBVAL; /* Short Packet */ + } + } + else + { + g_usb1_function_data_count[pipe] -= count; + } + + return status; /* End or Err or Continue */ +} + +/******************************************************************************* +* Function Name: usb1_function_write_dma_d0 +* Description : Writes data in the buffer allocated in the pipe specified in the argument. +* : Writes data by DMA transfer using D0FIFO. +* : The DMA-ch for using is specified by Userdef_USB_usb1_function_start_dma(). +* Arguments : uint16_t pipe ; Pipe Number +* Return Value : DEVDRV_USBF_WRITEEND : Write end +* : DEVDRV_USBF_WRITESHRT : short data +* : DEVDRV_USBF_WRITING : Continue of data write +* : DEVDRV_USBF_WRITEDMA : Write DMA +* : DEVDRV_USBF_FIFOERROR : FIFO status +*******************************************************************************/ +static uint16_t usb1_function_write_dma_d0 (uint16_t pipe) +{ + uint32_t count; + uint16_t size; + uint16_t buffer; + uint16_t status; + uint16_t mbw; + uint16_t dfacc = 0; + + mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]); + buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_D0DMA, DEVDRV_USBF_NO, mbw); + + if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */ + { + return DEVDRV_USBF_FIFOERROR; + } + + size = usb1_function_get_buf_size(pipe); /* Data buffer size */ + count = g_usb1_function_data_count[pipe]; + + if (count != 0) + { + g_usb1_function_DmaPipe[USB_FUNCTION_D0FIFO] = pipe; + + if ((count % size) != 0) + { + g_usb1_function_DmaBval[USB_FUNCTION_D0FIFO] = 1; + } + else + { + g_usb1_function_DmaBval[USB_FUNCTION_D0FIFO] = 0; + } + + dfacc = usb1_function_set_dfacc_d0(mbw, count); + + if (mbw == USB_FUNCTION_BITMBW_32) + { + g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 2; /* 32bit transfer */ + } + else if (mbw == USB_FUNCTION_BITMBW_16) + { + g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 1; /* 16bit transfer */ + } + else + { + g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 0; /* 8bit transfer */ + } + + g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].fifo = USB_FUNCTION_D0FIFO_DMA; + g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].dir = USB_FUNCTION_BUF2FIFO; + g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].buffer = (uint32_t)g_usb1_function_data_pointer[pipe]; + g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].bytes = count; + + Userdef_USB_usb1_function_start_dma(&g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO], dfacc); + + usb1_function_set_curpipe2(pipe, USB_FUNCTION_D0DMA, DEVDRV_USBF_NO, mbw, dfacc); + + RZA_IO_RegWrite_16(&USB201.D0FIFOSEL, 1, USB_DnFIFOSEL_DREQE_SHIFT, USB_DnFIFOSEL_DREQE); + + g_usb1_function_data_count[pipe] = 0; + g_usb1_function_data_pointer[pipe] += count; + status = DEVDRV_USBF_WRITEDMA; /* DMA write */ + } + else + { + if (RZA_IO_RegRead_16(&USB201.D0FIFOCTR, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL) == 0) + { + RZA_IO_RegWrite_16(&USB201.D0FIFOCTR, 1, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL); /* Short Packet */ + } + status = DEVDRV_USBF_WRITESHRT; /* Short Packet is end of write */ + } + + return status; /* End or Err or Continue */ +} + +/******************************************************************************* +* Function Name: usb1_function_write_dma_d1 +* Description : Writes data in the buffer allocated in the pipe specified in the argument. +* : Writes data by DMA transfer using D1FIFO. +* : The DMA-ch for using is specified by Userdef_USB_usb1_function_start_dma(). +* Arguments : uint16_t pipe ; Pipe Number +* Return Value : DEVDRV_USBF_WRITEEND : Write end +* : DEVDRV_USBF_WRITESHRT : short data +* : DEVDRV_USBF_WRITING : Continue of data write +* : DEVDRV_USBF_WRITEDMA : Write DMA +* : DEVDRV_USBF_FIFOERROR : FIFO status +*******************************************************************************/ +static uint16_t usb1_function_write_dma_d1 (uint16_t pipe) +{ + uint32_t count; + uint16_t size; + uint16_t buffer; + uint16_t status; + uint16_t mbw; + uint16_t dfacc=0; + + mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]); + buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_D1DMA, DEVDRV_USBF_NO, mbw); + + if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */ + { + return DEVDRV_USBF_FIFOERROR; + } + + size = usb1_function_get_buf_size(pipe); /* Data buffer size */ + count = g_usb1_function_data_count[pipe]; + + if (count != 0) + { + g_usb1_function_DmaPipe[USB_FUNCTION_D1FIFO] = pipe; + if ((count % size) != 0) + { + g_usb1_function_DmaBval[USB_FUNCTION_D1FIFO] = 1; + } + else + { + g_usb1_function_DmaBval[USB_FUNCTION_D1FIFO] = 0; + } + + dfacc = usb1_function_set_dfacc_d1(mbw, count); + + if (mbw == USB_FUNCTION_BITMBW_32) + { + g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 2; /* 32bit transfer */ + } + else if (mbw == USB_FUNCTION_BITMBW_16) + { + g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 1; /* 16bit transfer */ + } + else + { + g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 0; /* 8bit transfer */ + } + + g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].fifo = USB_FUNCTION_D1FIFO_DMA; + g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].dir = USB_FUNCTION_BUF2FIFO; + g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].buffer = (uint32_t)g_usb1_function_data_pointer[pipe]; + g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].bytes = count; + + Userdef_USB_usb1_function_start_dma(&g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO], dfacc); + + usb1_function_set_curpipe2(pipe, USB_FUNCTION_D1DMA, DEVDRV_USBF_NO, mbw, dfacc); + + RZA_IO_RegWrite_16(&USB201.D1FIFOSEL, 1, USB_DnFIFOSEL_DREQE_SHIFT, USB_DnFIFOSEL_DREQE); + + g_usb1_function_data_count[pipe] = 0; + g_usb1_function_data_pointer[pipe] += count; + + status = DEVDRV_USBF_WRITEDMA; /* DMA write */ + } + else + { + if (RZA_IO_RegRead_16(&USB201.D1FIFOCTR, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL) == 0) + { + RZA_IO_RegWrite_16(&USB201.D1FIFOCTR, 1, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL); /* Short Packet */ + } + status = DEVDRV_USBF_WRITESHRT; /* Short Packet is end of write */ + } + + return status; /* End or Err or Continue */ +} + +/******************************************************************************* +* Function Name: usb1_function_start_receive_transfer +* Description : Starts USB data reception using the pipe specified in the argument. +* : The FIFO for using is set in the pipe definition table. +* Arguments : uint16_t pipe ; Pipe Number +* : uint32_t size ; Data Size +* : uint8_t *data ; Data Address +* Return Value : none +*******************************************************************************/ +void usb1_function_start_receive_transfer (uint16_t pipe, uint32_t size, uint8_t * data) +{ + uint16_t usefifo; + + usb1_function_clear_bemp_sts(pipe); + usb1_function_clear_brdy_sts(pipe); + usb1_function_clear_nrdy_sts(pipe); + + usefifo = (uint16_t)(g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE); + + switch (usefifo) + { + case USB_FUNCTION_D0FIFO_USE: + usb1_function_start_receive_trns_d0(pipe, size, data); + break; + + case USB_FUNCTION_D1FIFO_USE: + usb1_function_start_receive_trns_d1(pipe, size, data); + break; + + case USB_FUNCTION_D0FIFO_DMA: + usb1_function_start_receive_dma_d0(pipe, size, data); + break; + + case USB_FUNCTION_D1FIFO_DMA: + usb1_function_start_receive_dma_d1(pipe, size, data); + break; + + default: + usb1_function_start_receive_trns_c(pipe, size, data); + break; + } +} + +/******************************************************************************* +* Function Name: usb1_function_start_receive_trns_c +* Description : Reads data from the buffer allocated in the pipe specified in the argument. +* : Reads data by CPU transfer using CFIFO. +* : When storing data in the buffer allocated in the pipe specified in the +* : argument, BRDY interrupt is generated to read data +* : in the interrupt. +* Arguments : uint16_t pipe ; Pipe Number +* : uint32_t size ; Data Size +* : uint8_t *data ; Data Address +* Return Value : none +*******************************************************************************/ +static void usb1_function_start_receive_trns_c (uint16_t pipe, uint32_t size, uint8_t * data) +{ + uint16_t mbw; + + usb1_function_set_pid_nak(pipe); + g_usb1_function_data_count[pipe] = size; + g_usb1_function_data_pointer[pipe] = (uint8_t *)data; + g_usb1_function_PipeIgnore[pipe] = 0; + + g_usb1_function_PipeDataSize[pipe] = size; + g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT; + + mbw = usb1_function_get_mbw(size, (uint32_t)data); + usb1_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_CUSE, USB_FUNCTION_CFIFO_READ, mbw); + USB201.CFIFOCTR = USB_FUNCTION_BITBCLR; + + usb1_function_set_transaction_counter(pipe, size); + + usb1_function_aclrm(pipe); + + usb1_function_enable_nrdy_int(pipe); + usb1_function_enable_brdy_int(pipe); + + usb1_function_set_pid_buf(pipe); +} + +/******************************************************************************* +* Function Name: usb1_function_start_receive_trns_d0 +* Description : Reads data from the buffer allocated in the pipe specified in the argument. +* : Reads data by CPU transfer using D0FIFO. +* : This function does not read data from the buffer. +* : When storing data in the buffer allocated in the pipe specified +* : in the argument, BRDY interrupt is generated to read data in the +* : interrupt. +* Arguments : uint16_t pipe ; Pipe Number +* : uint32_t size ; Data Size +* : uint8_t *data ; Data Address +* Return Value : none +*******************************************************************************/ +static void usb1_function_start_receive_trns_d0 (uint16_t pipe, uint32_t size, uint8_t * data) +{ + uint16_t mbw; + + usb1_function_set_pid_nak(pipe); + g_usb1_function_data_count[pipe] = size; + g_usb1_function_data_pointer[pipe] = (uint8_t *)data; + g_usb1_function_PipeIgnore[pipe] = 0; + + g_usb1_function_PipeDataSize[pipe] = size; + g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT; + + mbw = usb1_function_get_mbw(size, (uint32_t)data); + usb1_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_D0USE, DEVDRV_USBF_NO, mbw); + + usb1_function_set_transaction_counter(pipe, size); + + usb1_function_aclrm(pipe); + + usb1_function_enable_nrdy_int(pipe); + usb1_function_enable_brdy_int(pipe); + + usb1_function_set_pid_buf(pipe); +} + +/******************************************************************************* +* Function Name: usb1_function_start_receive_trns_d1 +* Description : Reads data from the buffer allocated in the pipe specified in the argument. +* : Reads data by CPU transfer using D1FIFO. +* : This function does not read data from the buffer. +* : When storing data in the buffer allocated in the pipe specified +* : in the argument, BRDY interrupt is generated to read data. +* Arguments : uint16_t pipe ; Pipe Number +* : uint32_t size ; Data Size +* : uint8_t *data ; Data Address +* Return Value : none +*******************************************************************************/ +static void usb1_function_start_receive_trns_d1 (uint16_t pipe, uint32_t size, uint8_t * data) +{ + uint16_t mbw; + + usb1_function_set_pid_nak(pipe); + g_usb1_function_data_count[pipe] = size; + g_usb1_function_data_pointer[pipe] = (uint8_t *)data; + g_usb1_function_PipeIgnore[pipe] = 0; + + g_usb1_function_PipeDataSize[pipe] = size; + g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT; + + mbw = usb1_function_get_mbw(size, (uint32_t)data); + usb1_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_D1USE, DEVDRV_USBF_NO, mbw); + + usb1_function_set_transaction_counter(pipe, size); + + usb1_function_aclrm(pipe); + + usb1_function_enable_nrdy_int(pipe); + usb1_function_enable_brdy_int(pipe); + + usb1_function_set_pid_buf(pipe); +} + +/******************************************************************************* +* Function Name: usb1_function_start_receive_dma_d0 +* Description : Reads data from the buffer allocated in the pipe specified in the argument. +* : Reads data by DMA transfer using D0FIFO. +* : This function does not read data from the buffer. +* : When storing data in the buffer allocated in the pipe specified +* : in the argument, delivered read request to DMAC to read data from +* : the buffer by DMAC. +* Arguments : uint16_t pipe ; Pipe Number +* : uint32_t size ; Data Size +* : uint8_t *data ; Data Address +* Return Value : none +*******************************************************************************/ +static void usb1_function_start_receive_dma_d0 (uint16_t pipe, uint32_t size, uint8_t * data) +{ + uint16_t mbw; + + usb1_function_set_pid_nak(pipe); + g_usb1_function_data_count[pipe] = size; + g_usb1_function_data_pointer[pipe] = (uint8_t *)data; + g_usb1_function_PipeIgnore[pipe] = 0; + + g_usb1_function_PipeDataSize[pipe] = 0; + g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT; + + mbw = usb1_function_get_mbw(size, (uint32_t)data); + usb1_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_D0USE, DEVDRV_USBF_NO, mbw); + + usb1_function_set_transaction_counter(pipe, size); + + usb1_function_aclrm(pipe); + + if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1) + { + usb1_function_read_dma(pipe); + + usb1_function_enable_nrdy_int(pipe); + usb1_function_enable_brdy_int(pipe); + } + else + { + usb1_function_enable_nrdy_int(pipe); + usb1_function_enable_brdy_int(pipe); + } + + usb1_function_set_pid_buf(pipe); +} + +/******************************************************************************* +* Function Name: usb1_function_start_receive_dma_d1 +* Description : Read data from the buffer allocated in the pipe specified in the argument. +* : Reads data by DMA transfer using D0FIFO. +* : This function does not read data from the buffer. +* : When storing data in the buffer allocated in the pipe specified +* : in the argument, delivered read request to DMAC to read data from +* : the buffer by DMAC. +* Arguments : uint16_t pipe ; Pipe Number +* : uint32_t size ; Data Size +* : uint8_t *data ; Data Address +* Return Value : none +*******************************************************************************/ +static void usb1_function_start_receive_dma_d1 (uint16_t pipe, uint32_t size, uint8_t * data) +{ + uint16_t mbw; + + usb1_function_set_pid_nak(pipe); + g_usb1_function_data_count[pipe] = size; + g_usb1_function_data_pointer[pipe] = (uint8_t *)data; + g_usb1_function_PipeIgnore[pipe] = 0; + + g_usb1_function_PipeDataSize[pipe] = 0; + g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT; + + mbw = usb1_function_get_mbw(size, (uint32_t)data); + usb1_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_D1USE, DEVDRV_USBF_NO, mbw); + + usb1_function_set_transaction_counter(pipe, size); + + usb1_function_aclrm(pipe); + + if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1) + { + usb1_function_read_dma(pipe); + + usb1_function_enable_nrdy_int(pipe); + usb1_function_enable_brdy_int(pipe); + } + else + { + usb1_function_enable_nrdy_int(pipe); + usb1_function_enable_brdy_int(pipe); + } + + usb1_function_set_pid_buf(pipe); +} + +/******************************************************************************* +* Function Name: usb1_function_read_buffer +* Description : Reads data from the buffer allocated in the pipe specified +* : in the argument. +* : Uses FIF0 set in the pipe definition table. +* Arguments : uint16_t pipe ; Pipe Number +* Return Value : USB_FUNCTION_READEND ; Read end +* : USB_FUNCTION_READSHRT ; short data +* : USB_FUNCTION_READING ; Continue of data read +* : USB_FUNCTION_READOVER ; buffer over +* : DEVDRV_USBF_FIFOERROR ; FIFO status +*******************************************************************************/ +uint16_t usb1_function_read_buffer (uint16_t pipe) +{ + uint16_t status; + + g_usb1_function_PipeIgnore[pipe] = 0; + + if ((g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D0FIFO_USE) + { + status = usb1_function_read_buffer_d0(pipe); + } + else if ((g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D1FIFO_USE) + { + status = usb1_function_read_buffer_d1(pipe); + } + else + { + status = usb1_function_read_buffer_c(pipe); + } + + switch (status) + { + case USB_FUNCTION_READING: /* Continue of data read */ + break; + + case USB_FUNCTION_READEND: /* End of data read */ + case USB_FUNCTION_READSHRT: /* End of data read */ + usb1_function_disable_brdy_int(pipe); + g_usb1_function_PipeDataSize[pipe] -= g_usb1_function_data_count[pipe]; + g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE; + break; + + case USB_FUNCTION_READOVER: /* buffer over */ + if ((g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D0FIFO_USE) + { + USB201.D0FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */ + } + else if ((g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D1FIFO_USE) + { + USB201.D1FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */ + } + else + { + USB201.CFIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */ + } + usb1_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */ + g_usb1_function_PipeDataSize[pipe] -= g_usb1_function_data_count[pipe]; + g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_FIFOERROR; + break; + + case DEVDRV_USBF_FIFOERROR: /* FIFO access status */ + default: + usb1_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */ + g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_FIFOERROR; + break; + } + + return status; /* End or Err or Continue */ +} + +/******************************************************************************* +* Function Name: usb1_function_read_buffer_c +* Description : Reads data from the buffer allocated in the pipe specified in the argument. +* : Reads data by CPU transfer using CFIFO. +* Arguments : uint16_t pipe ; Pipe Number +* Return Value : USB_FUNCTION_READEND ; Read end +* : USB_FUNCTION_READSHRT ; short data +* : USB_FUNCTION_READING ; Continue of data read +* : USB_FUNCTION_READOVER ; buffer over +* : DEVDRV_USBF_FIFOERROR ; FIFO status +*******************************************************************************/ +uint16_t usb1_function_read_buffer_c (uint16_t pipe) +{ + uint32_t count; + uint32_t dtln; + uint16_t buffer; + uint16_t mxps; + uint16_t status; + uint16_t mbw; + + mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]); + buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_CUSE, DEVDRV_USBF_NO, mbw); + + if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */ + { + return DEVDRV_USBF_FIFOERROR; + } + + dtln = (uint32_t)(buffer & USB_FUNCTION_BITDTLN); + mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */ + + if (g_usb1_function_data_count[pipe] < dtln) /* Buffer Over ? */ + { + status = USB_FUNCTION_READOVER; + usb1_function_set_pid_nak(pipe); /* Set NAK */ + count = g_usb1_function_data_count[pipe]; + } + else if (g_usb1_function_data_count[pipe] == dtln) /* just Receive Size */ + { + status = USB_FUNCTION_READEND; + usb1_function_set_pid_nak(pipe); /* Set NAK */ + count = dtln; + + if (count == 0) + { + status = USB_FUNCTION_READSHRT; /* Null Packet receive */ + } + + if ((count % mxps) != 0) + { + status = USB_FUNCTION_READSHRT; /* Short Packet receive */ + } + } + else /* continue Receive data */ + { + status = USB_FUNCTION_READING; + count = dtln; + + if (count == 0) + { + status = USB_FUNCTION_READSHRT; /* Null Packet receive */ + usb1_function_set_pid_nak(pipe); /* Set NAK */ + } + + if ((count % mxps) != 0) + { + status = USB_FUNCTION_READSHRT; /* Short Packet receive */ + usb1_function_set_pid_nak(pipe); /* Set NAK */ + } + } + + if (count == 0) /* 0 length packet */ + { + USB201.CFIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */ + } + else + { + usb1_function_read_c_fifo(pipe, (uint16_t)count); + } + + g_usb1_function_data_count[pipe] -= count; + + return status; /* End or Err or Continue */ +} + +/******************************************************************************* +* Function Name: usb1_function_read_buffer_d0 +* Description : Reads data from the buffer allocated in the pipe specified in +* : the argument. +* : Reads data by CPU transfer using D0FIFO. +* Arguments : uint16_t pipe ; Pipe Number +* Return Value : USB_FUNCTION_READEND ; Read end +* : USB_FUNCTION_READSHRT ; short data +* : USB_FUNCTION_READING ; Continue of data read +* : USB_FUNCTION_READOVER ; buffer over +* : DEVDRV_USBF_FIFOERROR ; FIFO status +*******************************************************************************/ +uint16_t usb1_function_read_buffer_d0 (uint16_t pipe) +{ + uint32_t count; + uint32_t dtln; + uint16_t buffer; + uint16_t mxps; + uint16_t status; + uint16_t mbw; + uint16_t pipebuf_size; + + mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]); + buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_D0USE, DEVDRV_USBF_NO, mbw); + + if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */ + { + return DEVDRV_USBF_FIFOERROR; + } + + dtln = (uint32_t)(buffer & USB_FUNCTION_BITDTLN); + mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */ + + if (g_usb1_function_data_count[pipe] < dtln) /* Buffer Over ? */ + { + status = USB_FUNCTION_READOVER; + usb1_function_set_pid_nak(pipe); /* Set NAK */ + count = g_usb1_function_data_count[pipe]; + } + else if (g_usb1_function_data_count[pipe] == dtln) /* just Receive Size */ + { + status = USB_FUNCTION_READEND; + usb1_function_set_pid_nak(pipe); /* Set NAK */ + count = dtln; + + if (count == 0) + { + status = USB_FUNCTION_READSHRT; /* Null Packet receive */ + } + + if ((count % mxps) != 0) + { + status = USB_FUNCTION_READSHRT; /* Short Packet receive */ + } + } + else /* continue Receive data */ + { + status = USB_FUNCTION_READING; + count = dtln; + + if (count == 0) + { + status = USB_FUNCTION_READSHRT; /* Null Packet receive */ + usb1_function_set_pid_nak(pipe); /* Set NAK */ + } + + if ((count % mxps) != 0) + { + status = USB_FUNCTION_READSHRT; /* Short Packet receive */ + usb1_function_set_pid_nak(pipe); /* Set NAK */ + } + else + { + pipebuf_size = usb1_function_get_buf_size(pipe); /* Data buffer size */ + + if (count != pipebuf_size) + { + status = USB_FUNCTION_READSHRT; /* Short Packet receive */ + usb1_function_set_pid_nak(pipe); /* Set NAK */ + } + } + } + + if (count == 0) /* 0 length packet */ + { + USB201.D0FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */ + } + else + { + usb1_function_read_d0_fifo(pipe, (uint16_t)count); + } + + g_usb1_function_data_count[pipe] -= count; + + return status; /* End or Err or Continue */ +} + +/******************************************************************************* +* Function Name: usb1_function_read_buffer_d1 +* Description : Reads data from the buffer allocated in the pipe specified +* : in the argument. +* : Reads data by CPU transfer using D1FIFO. +* Arguments : uint16_t pipe ; Pipe Number +* Return Value : USB_FUNCTION_READEND ; Read end +* : USB_FUNCTION_READSHRT ; short data +* : USB_FUNCTION_READING ; Continue of data read +* : USB_FUNCTION_READOVER ; buffer over +* : DEVDRV_USBF_FIFOERROR ; FIFO status +*******************************************************************************/ +uint16_t usb1_function_read_buffer_d1 (uint16_t pipe) +{ + uint32_t count; + uint32_t dtln; + uint16_t buffer; + uint16_t mxps; + uint16_t status; + uint16_t mbw; + uint16_t pipebuf_size; + + mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]); + buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_D1USE, DEVDRV_USBF_NO, mbw); + + if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */ + { + return DEVDRV_USBF_FIFOERROR; + } + + dtln = (uint32_t)(buffer & USB_FUNCTION_BITDTLN); + mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */ + + if (g_usb1_function_data_count[pipe] < dtln) /* Buffer Over ? */ + { + status = USB_FUNCTION_READOVER; + usb1_function_set_pid_nak(pipe); /* Set NAK */ + count = g_usb1_function_data_count[pipe]; + } + else if (g_usb1_function_data_count[pipe] == dtln) /* just Receive Size */ + { + status = USB_FUNCTION_READEND; + usb1_function_set_pid_nak(pipe); /* Set NAK */ + count = dtln; + if (count == 0) + { + status = USB_FUNCTION_READSHRT; /* Null Packet receive */ + } + + if ((count % mxps) != 0) + { + status = USB_FUNCTION_READSHRT; /* Short Packet receive */ + } + } + else /* continue Receive data */ + { + status = USB_FUNCTION_READING; + count = dtln; + if (count == 0) + { + status = USB_FUNCTION_READSHRT; /* Null Packet receive */ + usb1_function_set_pid_nak(pipe); /* Set NAK */ + } + + if ((count % mxps) != 0) + { + status = USB_FUNCTION_READSHRT; /* Short Packet receive */ + usb1_function_set_pid_nak(pipe); /* Set NAK */ + } + else + { + pipebuf_size = usb1_function_get_buf_size(pipe); /* Data buffer size */ + + if (count != pipebuf_size) + { + status = USB_FUNCTION_READSHRT; /* Short Packet receive */ + usb1_function_set_pid_nak(pipe); /* Set NAK */ + } + } + } + + if (count == 0) /* 0 length packet */ + { + USB201.D1FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */ + } + else + { + usb1_function_read_d1_fifo(pipe, (uint16_t)count); + } + + g_usb1_function_data_count[pipe] -= count; + + return status; /* End or Err or Continue */ +} + +/******************************************************************************* +* Function Name: usb1_function_read_dma +* Description : Reads data from the buffer allocated in the pipe specified +* : in the argument. +* : Reads data by DMA transfer using D0FIFO or D1FIFO. +* Arguments : uint16_t pipe ; Pipe Number +* Return Value : USB_FUNCTION_READEND ; Read end +* : USB_FUNCTION_READSHRT ; short data +* : USB_FUNCTION_READING ; Continue of data read +* : USB_FUNCTION_READOVER ; buffer over +* : DEVDRV_USBF_FIFOERROR ; FIFO status +*******************************************************************************/ +uint16_t usb1_function_read_dma (uint16_t pipe) +{ + uint16_t status; + + g_usb1_function_PipeIgnore[pipe] = 0; + if ((g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D0FIFO_DMA) + { + status = usb1_function_read_dma_d0(pipe); + } + else + { + status = usb1_function_read_dma_d1(pipe); + } + + switch (status) + { + case USB_FUNCTION_READING: /* Continue of data read */ + break; + + case USB_FUNCTION_READZERO: /* End of data read */ + usb1_function_disable_brdy_int(pipe); + g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE; + break; + + case USB_FUNCTION_READEND: /* End of data read */ + case USB_FUNCTION_READSHRT: /* End of data read */ + usb1_function_disable_brdy_int(pipe); + + if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1) + { + g_usb1_function_PipeDataSize[pipe] -= g_usb1_function_data_count[pipe]; + } + break; + + case USB_FUNCTION_READOVER: /* buffer over */ + usb1_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */ + + if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1) + { + g_usb1_function_PipeDataSize[pipe] -= g_usb1_function_data_count[pipe]; + } + g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_FIFOERROR; + break; + + case DEVDRV_USBF_FIFOERROR: /* FIFO access status */ + default: + usb1_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */ + g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_FIFOERROR; + break; + } + + return status; /* End or Err or Continue */ +} + +/******************************************************************************* +* Function Name: usb1_function_read_dma_d0 +* Description : Writes data in the buffer allocated in the pipe specified +* : in the argument. +* : Reads data by DMA transfer using D0FIFO. +* Arguments : uint16_t pipe ; Pipe Number +* Return Value : USB_FUNCTION_READEND ; Read end +* : USB_FUNCTION_READSHRT ; short data +* : USB_FUNCTION_READZERO ; zero data +* : USB_FUNCTION_READING ; Continue of data read +* : USB_FUNCTION_READOVER ; buffer over +* : DEVDRV_USBF_FIFOERROR ; FIFO status +*******************************************************************************/ +static uint16_t usb1_function_read_dma_d0 (uint16_t pipe) +{ + uint32_t count; + uint32_t dtln; + uint16_t buffer; + uint16_t mxps; + uint16_t status; + uint16_t mbw; + uint16_t dfacc = 0; + uint16_t pipebuf_size; + + g_usb1_function_DmaStatus[USB_FUNCTION_D0FIFO] = USB_FUNCTION_DMA_READY; + + mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]); + + if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1) + { + count = g_usb1_function_data_count[pipe]; + status = USB_FUNCTION_READING; + } + else + { + buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_D0DMA, DEVDRV_USBF_NO, mbw); + + if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */ + { + return DEVDRV_USBF_FIFOERROR; + } + + dtln = (uint32_t)(buffer & USB_FUNCTION_BITDTLN); + mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */ + + if (g_usb1_function_data_count[pipe] < dtln) /* Buffer Over ? */ + { + status = USB_FUNCTION_READOVER; + count = g_usb1_function_data_count[pipe]; + } + else if (g_usb1_function_data_count[pipe] == dtln) /* just Receive Size */ + { + status = USB_FUNCTION_READEND; + count = dtln; + if (count == 0) + { + status = USB_FUNCTION_READSHRT; /* Null Packet receive */ + } + + if ((count % mxps) != 0) + { + status = USB_FUNCTION_READSHRT; /* Short Packet receive */ + } + } + else /* continue Receive data */ + { + status = USB_FUNCTION_READING; + count = dtln; + + if (count == 0) + { + status = USB_FUNCTION_READSHRT; /* Null Packet receive */ + } + + if ((count % mxps) != 0) + { + status = USB_FUNCTION_READSHRT; /* Short Packet receive */ + } + else + { + pipebuf_size = usb1_function_get_buf_size(pipe); /* Data buffer size */ + if (count != pipebuf_size) + { + status = USB_FUNCTION_READSHRT; /* Short Packet receive */ + } + } + } + } + + if (count == 0) /* 0 length packet */ + { + if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0) + { + USB201.D0FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */ + status = USB_FUNCTION_READZERO; /* Null Packet receive */ + } + else + { + usb1_function_set_curpipe(pipe, USB_FUNCTION_D0DMA, DEVDRV_USBF_NO, mbw); + /* transaction counter No set */ + /* FRDY = 1, DTLN = 0 -> BRDY */ + } + } + else + { + dfacc = usb1_function_set_dfacc_d0(mbw, count); + + if (mbw == USB_FUNCTION_BITMBW_32) + { + g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 2; /* 32bit transfer */ + } + else if (mbw == USB_FUNCTION_BITMBW_16) + { + g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 1; /* 16bit transfer */ + } + else + { + g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 0; /* 8bit transfer */ + } + + g_usb1_function_DmaPipe[USB_FUNCTION_D0FIFO] = pipe; /* not use in read operation */ + g_usb1_function_DmaBval[USB_FUNCTION_D0FIFO] = 0; /* not use in read operation */ + + g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].fifo = USB_FUNCTION_D0FIFO_DMA; + g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].dir = USB_FUNCTION_FIFO2BUF; + g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].buffer = (uint32_t)g_usb1_function_data_pointer[pipe]; + g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].bytes = count; + + if (status == USB_FUNCTION_READING) + { + g_usb1_function_DmaStatus[USB_FUNCTION_D0FIFO] = USB_FUNCTION_DMA_BUSY; + } + else + { + g_usb1_function_DmaStatus[USB_FUNCTION_D0FIFO] = USB_FUNCTION_DMA_BUSYEND; + } + + Userdef_USB_usb1_function_start_dma(&g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO], dfacc); + + usb1_function_set_curpipe2(pipe, USB_FUNCTION_D0DMA, DEVDRV_USBF_NO, mbw, dfacc); + + RZA_IO_RegWrite_16(&USB201.D0FIFOSEL, + 1, + USB_DnFIFOSEL_DREQE_SHIFT, + USB_DnFIFOSEL_DREQE); + } + + if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0) + { + g_usb1_function_data_count[pipe] -= count; + g_usb1_function_data_pointer[pipe] += count; + g_usb1_function_PipeDataSize[pipe] += count; + } + + return status; /* End or Err or Continue */ +} + +/******************************************************************************* +* Function Name: usb1_function_read_dma_d1 +* Description : Reads data from the buffer allocated in the pipe specified in +* : the argument. +* : Reads data by DMA transfer using D1FIFO. +* Arguments : uint16_t pipe ; Pipe Number +* Return Value : USB_FUNCTION_READEND ; Read end +* : USB_FUNCTION_READSHRT ; short data +* : USB_FUNCTION_READZERO ; zero data +* : USB_FUNCTION_READING ; Continue of data read +* : USB_FUNCTION_READOVER ; buffer over +* : DEVDRV_USBF_FIFOERROR ; FIFO status +*******************************************************************************/ +static uint16_t usb1_function_read_dma_d1 (uint16_t pipe) +{ + uint32_t count; + uint32_t dtln; + uint16_t buffer; + uint16_t mxps; + uint16_t status; + uint16_t mbw; + uint16_t dfacc = 0; + uint16_t pipebuf_size; + + g_usb1_function_DmaStatus[USB_FUNCTION_D1FIFO] = USB_FUNCTION_DMA_READY; + + mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]); + + if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1) + { + count = g_usb1_function_data_count[pipe]; + status = USB_FUNCTION_READING; + } + else + { + buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_D1DMA, DEVDRV_USBF_NO, mbw); + if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */ + { + return DEVDRV_USBF_FIFOERROR; + } + + dtln = (uint32_t)(buffer & USB_FUNCTION_BITDTLN); + mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */ + + if (g_usb1_function_data_count[pipe] < dtln) /* Buffer Over ? */ + { + status = USB_FUNCTION_READOVER; + count = g_usb1_function_data_count[pipe]; + } + else if (g_usb1_function_data_count[pipe] == dtln) /* just Receive Size */ + { + status = USB_FUNCTION_READEND; + count = dtln; + if (count == 0) + { + status = USB_FUNCTION_READSHRT; /* Null Packet receive */ + } + + if ((count % mxps) != 0) + { + status = USB_FUNCTION_READSHRT; /* Short Packet receive */ + } + } + else /* continue Receive data */ + { + status = USB_FUNCTION_READING; + count = dtln; + if (count == 0) + { + status = USB_FUNCTION_READSHRT; /* Null Packet receive */ + } + + if ((count % mxps) != 0) + { + status = USB_FUNCTION_READSHRT; /* Short Packet receive */ + } + else + { + pipebuf_size = usb1_function_get_buf_size(pipe); /* Data buffer size */ + if (count != pipebuf_size) + { + status = USB_FUNCTION_READSHRT; /* Short Packet receive */ + } + } + } + } + + if (count == 0) /* 0 length packet */ + { + if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0) + { + USB201.D1FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */ + status = USB_FUNCTION_READZERO; /* Null Packet receive */ + } + else + { + usb1_function_set_curpipe(pipe, USB_FUNCTION_D1DMA, DEVDRV_USBF_NO, mbw); + /* transaction counter No set */ + /* FRDY = 1, DTLN = 0 -> BRDY */ + } + } + else + { + dfacc = usb1_function_set_dfacc_d1(mbw, count); + + if (mbw == USB_FUNCTION_BITMBW_32) + { + g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 2; /* 32bit transfer */ + } + else if (mbw == USB_FUNCTION_BITMBW_16) + { + g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 1; /* 16bit transfer */ + } + else + { + g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 0; /* 8bit transfer */ + } + + g_usb1_function_DmaPipe[USB_FUNCTION_D1FIFO] = pipe; /* not use in read operation */ + g_usb1_function_DmaBval[USB_FUNCTION_D1FIFO] = 0; /* not use in read operation */ + + g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].fifo = USB_FUNCTION_D1FIFO_DMA; + g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].dir = USB_FUNCTION_FIFO2BUF; + g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].buffer = (uint32_t)g_usb1_function_data_pointer[pipe]; + g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].bytes = count; + + if (status == USB_FUNCTION_READING) + { + g_usb1_function_DmaStatus[USB_FUNCTION_D1FIFO] = USB_FUNCTION_DMA_BUSY; + } + else + { + g_usb1_function_DmaStatus[USB_FUNCTION_D1FIFO] = USB_FUNCTION_DMA_BUSYEND; + } + + Userdef_USB_usb1_function_start_dma(&g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO], dfacc); + + usb1_function_set_curpipe2(pipe, USB_FUNCTION_D1DMA, DEVDRV_USBF_NO, mbw, dfacc); + + RZA_IO_RegWrite_16(&USB201.D1FIFOSEL, + 1, + USB_DnFIFOSEL_DREQE_SHIFT, + USB_DnFIFOSEL_DREQE); + } + + if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0) + { + g_usb1_function_data_count[pipe] -= count; + g_usb1_function_data_pointer[pipe] += count; + g_usb1_function_PipeDataSize[pipe] += count; + } + + return status; /* End or Err or Continue */ +} + +/******************************************************************************* +* Function Name: usb1_function_change_fifo_port +* Description : Allocates FIF0 specified by the argument in the pipe assigned +* : by the argument. After allocating FIF0, waits in the software +* : till the corresponding pipe becomes ready. +* Arguments : uint16_t pipe ; Pipe Number +* : uint16_t fifosel ; Select FIFO +* : uint16_t isel ; FIFO Access Direction +* : uint16_t mbw ; FIFO Port Access Bit Width +* Return Value : DEVDRV_USBF_FIFOERROR ; Error +* : Others ; CFIFOCTR/D0FIFOCTR/D1FIFOCTR Register Value +*******************************************************************************/ +uint16_t usb1_function_change_fifo_port (uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw) +{ + uint16_t buffer; + uint32_t loop; + volatile uint32_t loop2; + + usb1_function_set_curpipe(pipe, fifosel, isel, mbw); + + for (loop = 0; loop < 4; loop++) + { + switch (fifosel) + { + case USB_FUNCTION_CUSE: + buffer = USB201.CFIFOCTR; + break; + + case USB_FUNCTION_D0USE: + case USB_FUNCTION_D0DMA: + buffer = USB201.D0FIFOCTR; + break; + + case USB_FUNCTION_D1USE: + case USB_FUNCTION_D1DMA: + buffer = USB201.D1FIFOCTR; + break; + + default: + buffer = 0; + break; + } + + if ((buffer & USB_FUNCTION_BITFRDY) == USB_FUNCTION_BITFRDY) + { + return buffer; + } + + loop2 = 25; + while (loop2-- > 0) + { + /* wait */ + } + } + + return DEVDRV_USBF_FIFOERROR; +} + +/******************************************************************************* +* Function Name: usb1_function_set_curpipe +* Description : Allocates FIF0 specified by the argument in the pipe assigned +* : by the argument. +* Arguments : uint16_t pipe ; Pipe Number +* : uint16_t fifosel ; Select FIFO +* : uint16_t isel ; FIFO Access Direction +* : uint16_t mbw ; FIFO Port Access Bit Width +* Return Value : none +*******************************************************************************/ +void usb1_function_set_curpipe (uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw) +{ + uint16_t buffer; + uint32_t loop; + volatile uint32_t loop2; + + g_usb1_function_mbw[pipe] = mbw; + + switch (fifosel) + { + case USB_FUNCTION_CUSE: + buffer = USB201.CFIFOSEL; + buffer &= (uint16_t)~(USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE); + buffer |= (uint16_t)(~isel & USB_FUNCTION_BITISEL); + USB201.CFIFOSEL = buffer; + + for (loop = 0; loop < 4; loop++) + { + if ((USB201.CFIFOSEL & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)) == + (buffer & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE))) + { + break; + } + + loop2 = 100; + + while (loop2-- > 0) + { + /* wait */ + } + } + buffer &= (uint16_t)~(USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW); + buffer |= (uint16_t)(isel | pipe | mbw); + USB201.CFIFOSEL = buffer; + + for (loop = 0; loop < 4; loop++) + { + if ((USB201.CFIFOSEL & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)) == + (buffer & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE))) + { + break; + } + + loop2 = 100; + + while (loop2-- > 0) + { + /* wait */ + } + } + break; + + case USB_FUNCTION_D0DMA: + case USB_FUNCTION_D0USE: + buffer = USB201.D0FIFOSEL; + buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE); + USB201.D0FIFOSEL = buffer; + + for (loop = 0; loop < 4; loop++) + { + if ((USB201.D0FIFOSEL & USB_FUNCTION_BITCURPIPE) == + (buffer & USB_FUNCTION_BITCURPIPE)) + { + break; + } + + loop2 = 100; + + while (loop2-- > 0) + { + /* wait */ + } + } + buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW); + buffer |= (uint16_t)(pipe | mbw); + USB201.D0FIFOSEL = buffer; + + for (loop = 0; loop < 4; loop++) + { + if ((USB201.D0FIFOSEL & USB_FUNCTION_BITCURPIPE) == + (buffer & USB_FUNCTION_BITCURPIPE)) + { + break; + } + + loop2 = 100; + while (loop2-- > 0) + { + /* wait */ + } + } + break; + + case USB_FUNCTION_D1DMA: + case USB_FUNCTION_D1USE: + buffer = USB201.D1FIFOSEL; + buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE); + USB201.D1FIFOSEL = buffer; + + for (loop = 0; loop < 4; loop++) + { + if ((USB201.D1FIFOSEL & USB_FUNCTION_BITCURPIPE) == + (buffer & USB_FUNCTION_BITCURPIPE)) + { + break; + } + + loop2 = 100; + + while (loop2-- > 0) + { + /* wait */ + } + } + buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW); + buffer |= (uint16_t)(pipe | mbw); + USB201.D1FIFOSEL = buffer; + + for (loop = 0; loop < 4; loop++) + { + if ((USB201.D1FIFOSEL & USB_FUNCTION_BITCURPIPE) == + (buffer & USB_FUNCTION_BITCURPIPE)) + { + break; + } + + loop2 = 100; + + while (loop2-- > 0) + { + /* wait */ + } + } + break; + + default: + break; + } + + /* Cautions !!! + * Depending on the external bus speed of CPU, you may need to wait for 450ns here. + * For details, please look at the data sheet. */ + loop2 = 100; + + while (loop2-- > 0) + { + /* wait */ + } +} + +/******************************************************************************* +* Function Name: usb1_function_set_curpipe2 +* Description : Allocates FIF0 specified by the argument in the pipe assigned +* : by the argument. +* Arguments : uint16_t pipe ; Pipe Number +* : uint16_t fifosel ; Select FIFO +* : uint16_t isel ; FIFO Access Direction +* : uint16_t mbw ; FIFO Port Access Bit Width +* : uint16_t dfacc ; DFACC Access mode +* Return Value : none +*******************************************************************************/ +void usb1_function_set_curpipe2 (uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw, uint16_t dfacc) +{ + uint16_t buffer; + uint32_t loop; +#ifdef __USB_FUNCTION_DF_ACC_ENABLE__ + uint32_t dummy; +#endif + volatile uint32_t loop2; + + g_usb1_function_mbw[pipe] = mbw; + + switch (fifosel) + { + case USB_FUNCTION_CUSE: + buffer = USB201.CFIFOSEL; + buffer &= (uint16_t)~(USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE); + buffer |= (uint16_t)(~isel & USB_FUNCTION_BITISEL); + USB201.CFIFOSEL = buffer; + + for (loop = 0; loop < 4; loop++) + { + if ((USB201.CFIFOSEL & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)) == + (buffer & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE))) + { + break; + } + + loop2 = 100; + while (loop2-- > 0) + { + /* wait */ + } + } + buffer &= (uint16_t)~(USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW); + buffer |= (uint16_t)(isel | pipe | mbw); + USB201.CFIFOSEL = buffer; + + for (loop = 0; loop < 4; loop++) + { + if ((USB201.CFIFOSEL & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)) == + (buffer & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE))) + { + break; + } + + loop2 = 100; + + while (loop2-- > 0) + { + /* wait */ + } + } + break; + + case USB_FUNCTION_D0DMA: + case USB_FUNCTION_D0USE: + buffer = USB201.D0FIFOSEL; +#ifdef __USB_FUNCTION_DF_ACC_ENABLE__ + buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW); + + if (dfacc != 0) + { + buffer |= (uint16_t)(USB_FUNCTION_BITMBW_32); + } +#else + buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE); +#endif + USB201.D0FIFOSEL = buffer; + + for (loop = 0; loop < 4; loop++) + { + if ((USB201.D0FIFOSEL & USB_FUNCTION_BITCURPIPE) == (buffer & USB_FUNCTION_BITCURPIPE)) + { + break; + } + + loop2 = 100; + + while (loop2-- > 0) + { + /* wait */ + } + } + +#ifdef __USB_FUNCTION_DF_ACC_ENABLE__ + if (dfacc != 0) + { + dummy = USB201.D0FIFO.UINT32; + } +#endif + buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW); + buffer |= (uint16_t)(pipe | mbw); + USB201.D0FIFOSEL = buffer; + + for (loop = 0; loop < 4; loop++) + { + if ((USB201.D0FIFOSEL & USB_FUNCTION_BITCURPIPE) == (buffer & USB_FUNCTION_BITCURPIPE)) + { + break; + } + + loop2 = 100; + + while (loop2-- > 0) + { + /* wait */ + } + } + break; + + case USB_FUNCTION_D1DMA: + case USB_FUNCTION_D1USE: + buffer = USB201.D1FIFOSEL; +#ifdef __USB_FUNCTION_DF_ACC_ENABLE__ + buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW); + + if (dfacc != 0) + { + buffer |= (uint16_t)(USB_FUNCTION_BITMBW_32); + } +#else + buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE); +#endif + USB201.D1FIFOSEL = buffer; + + for (loop = 0; loop < 4; loop++) + { + if ((USB201.D1FIFOSEL & USB_FUNCTION_BITCURPIPE) == (buffer & USB_FUNCTION_BITCURPIPE)) + { + break; + } + + loop2 = 100; + + while (loop2-- > 0) + { + /* wait */ + } + } +#ifdef __USB_FUNCTION_DF_ACC_ENABLE__ + if (dfacc != 0) + { + dummy = USB201.D1FIFO.UINT32; + loop = dummy; // avoid warning. + } +#endif + buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW); + buffer |= (uint16_t)(pipe | mbw); + USB201.D1FIFOSEL = buffer; + + for (loop = 0; loop < 4; loop++) + { + if ((USB201.D1FIFOSEL & USB_FUNCTION_BITCURPIPE) == (buffer & USB_FUNCTION_BITCURPIPE)) + { + break; + } + + loop2 = 100; + + while (loop2-- > 0) + { + /* wait */ + } + } + break; + + default: + break; + } + + /* Cautions !!! + * Depending on the external bus speed of CPU, you may need to wait for 450ns here. + * For details, please look at the data sheet. */ + loop2 = 100; + + while (loop2-- > 0) + { + /* wait */ + } +} + +/******************************************************************************* +* Function Name: usb1_function_write_c_fifo +* Description : Writes data in CFIFO. +* : Writes data by BYTE/WORD/LONG according to access size +* : to the pipe specified by the arguments. +* : Before executing this function, allocating CFIF0 in the specified pipe +* : should be completed. +* : Before executing this function, access size to the specified pipe +* : should be fixed and set in g_usb1_function_mbw[]. +* Arguments : uint16_t pipe ; Pipe Number +* : uint16_t count ; Data Size(Byte) +* Return Value : none +*******************************************************************************/ +static void usb1_function_write_c_fifo (uint16_t pipe, uint16_t count) +{ + uint16_t even; + + if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_8) + { + for (even = count; even; --even) + { + USB201.CFIFO.UINT8[HH] = *g_usb1_function_data_pointer[pipe]; + g_usb1_function_data_pointer[pipe] += 1; + } + } + else if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_16) + { + for (even = (uint16_t)(count / 2); even; --even) + { + USB201.CFIFO.UINT16[H] = *((uint16_t *)g_usb1_function_data_pointer[pipe]); + g_usb1_function_data_pointer[pipe] += 2; + } + } + else + { + for (even = (uint16_t)(count / 4); even; --even) + { + USB201.CFIFO.UINT32 = *((uint32_t *)g_usb1_function_data_pointer[pipe]); + g_usb1_function_data_pointer[pipe] += 4; + } + } +} + +/******************************************************************************* +* Function Name: usb1_function_read_c_fifo +* Description : Reads data from CFIFO. +* : Reads data by BYTE/WORD/LONG according to access size +* : to the pipe specified by the arguments. +* : Before executing this function, allocating CFIF0 in the specified pipe +* : should be completed. +* : Before executing this function, access size to the specified pipe +* : should be fixed and set in g_usb1_function_mbw[]. +* Arguments : uint16_t pipe ; Pipe Number +* : uint16_t count ; Data Size(Byte) +* Return Value : none +*******************************************************************************/ +static void usb1_function_read_c_fifo (uint16_t pipe, uint16_t count) +{ + uint16_t even; + + if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_8) + { + for (even = count; even; --even) + { + *g_usb1_function_data_pointer[pipe] = USB201.CFIFO.UINT8[HH]; + g_usb1_function_data_pointer[pipe] += 1; + } + } + else if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_16) + { + for (even = (uint16_t)((count + 1) / 2); even; --even) + { + *((uint16_t *)g_usb1_function_data_pointer[pipe]) = USB201.CFIFO.UINT16[H]; + g_usb1_function_data_pointer[pipe] += 2; + } + } + else + { + for (even = (uint16_t)((count + 3) / 4); even; --even) + { + *((uint32_t *)g_usb1_function_data_pointer[pipe]) = USB201.CFIFO.UINT32; + g_usb1_function_data_pointer[pipe] += 4; + } + } +} + +/******************************************************************************* +* Function Name: usb1_function_write_d0_fifo +* Description : Writes data in D0FIFO. +* : Writes data by BYTE/WORD/LONG according to access size +* : to the pipe specified by the arguments. +* : Before executing this function, allocating CFIF0 in the specified pipe +* : should be completed. +* : Before executing this function, access size to the specified pipe +* : should be fixed and set in g_usb1_function_mbw[]. +* Arguments : uint16_t pipe ; Pipe Number +* : uint16_t count ; Data Size(Byte) +* Return Value : none +*******************************************************************************/ +static void usb1_function_write_d0_fifo (uint16_t pipe, uint16_t count) +{ + uint16_t even; + + if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_8) + { + for (even = count; even; --even) + { + USB201.D0FIFO.UINT8[HH] = *g_usb1_function_data_pointer[pipe]; + g_usb1_function_data_pointer[pipe] += 1; + } + } + else if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_16) + { + for (even = (uint16_t)(count / 2); even; --even) + { + USB201.D0FIFO.UINT16[H] = *((uint16_t *)g_usb1_function_data_pointer[pipe]); + g_usb1_function_data_pointer[pipe] += 2; + } + } + else + { + for (even = (uint16_t)(count / 4); even; --even) + { + USB201.D0FIFO.UINT32 = *((uint32_t *)g_usb1_function_data_pointer[pipe]); + g_usb1_function_data_pointer[pipe] += 4; + } + } +} + +/******************************************************************************* +* Function Name: usb1_function_read_d0_fifo +* Description : Reads data from D0FIFO. +* : Reads data by BYTE/WORD/LONG according to access size +* : to the pipe specified by the arguments. +* : Before executing this function, allocating DOFIF0 in the specified pipe +* : should be completed. +* : Before executing this function, access size to the specified pipe +* : should be fixed and set in g_usb1_function_mbw[]. +* Arguments : uint16_t pipe ; Pipe Number +* : uint16_t count ; Data Size(Byte) +* Return Value : none +*******************************************************************************/ +static void usb1_function_read_d0_fifo (uint16_t pipe, uint16_t count) +{ + uint16_t even; + + if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_8) + { + for (even = count; even; --even) + { + *g_usb1_function_data_pointer[pipe] = USB201.D0FIFO.UINT8[HH]; + g_usb1_function_data_pointer[pipe] += 1; + } + } + else if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_16) + { + for (even = (uint16_t)((count + 1) / 2); even; --even) + { + *((uint16_t *)g_usb1_function_data_pointer[pipe]) = USB201.D0FIFO.UINT16[H]; + g_usb1_function_data_pointer[pipe] += 2; + } + } + else + { + for (even = (uint16_t)((count + 3) / 4); even; --even) + { + *((uint32_t *)g_usb1_function_data_pointer[pipe]) = USB201.D0FIFO.UINT32; + g_usb1_function_data_pointer[pipe] += 4; + } + } +} + +/******************************************************************************* +* Function Name: usb1_function_write_d1_fifo +* Description : Writes data in D1FIFO. +* : Writes data by BYTE/WORD/LONG according to access size +* : to the pipe specified by the arguments. +* : Before executing this function, allocating D1FIF0 in the specified pipe +* : should be completed. +* : Before executing this function, access size to the specified pipe +* : should be fixed and set in g_usb1_function_mbw[]. +* Arguments : uint16_t pipe ; Pipe Number +* : uint16_t count ; Data Size(Byte) +* Return Value : none +*******************************************************************************/ +static void usb1_function_write_d1_fifo (uint16_t pipe, uint16_t count) +{ + uint16_t even; + + if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_8) + { + for (even = count; even; --even) + { + USB201.D1FIFO.UINT8[HH] = *g_usb1_function_data_pointer[pipe]; + g_usb1_function_data_pointer[pipe] += 1; + } + } + else if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_16) + { + for (even = (uint16_t)(count / 2); even; --even) + { + USB201.D1FIFO.UINT16[H] = *((uint16_t *)g_usb1_function_data_pointer[pipe]); + g_usb1_function_data_pointer[pipe] += 2; + } + } + else + { + for (even = (uint16_t)(count / 4); even; --even) + { + USB201.D1FIFO.UINT32 = *((uint32_t *)g_usb1_function_data_pointer[pipe]); + g_usb1_function_data_pointer[pipe] += 4; + } + } +} + +/******************************************************************************* +* Function Name: usb1_function_read_d1_fifo +* Description : Reads data from D1FIFO. +* : Reads data by BYTE/WORD/LONG according to access size +* : to the pipe specified by the arguments. +* : Before executing this function, allocating D1FIF0 in the specified pipe +* : should be completed. +* : Before executing this function, access size to the specified pipe +* : should be fixed and set in g_usb1_function_mbw[]. +* Arguments : uint16_t pipe ; Pipe Number +* : uint16_t count ; Data Size(Byte) +* Return Value : none +*******************************************************************************/ +static void usb1_function_read_d1_fifo (uint16_t pipe, uint16_t count) +{ + uint16_t even; + + if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_8) + { + for (even = count; even; --even) + { + *g_usb1_function_data_pointer[pipe] = USB201.D1FIFO.UINT8[HH]; + g_usb1_function_data_pointer[pipe] += 1; + } + } + else if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_16) + { + for (even = (uint16_t)((count + 1) / 2); even; --even) + { + *((uint16_t *)g_usb1_function_data_pointer[pipe]) = USB201.D1FIFO.UINT16[H]; + g_usb1_function_data_pointer[pipe] += 2; + } + } + else + { + for (even = (uint16_t)((count + 3) / 4); even; --even) + { + *((uint32_t *)g_usb1_function_data_pointer[pipe]) = USB201.D1FIFO.UINT32; + g_usb1_function_data_pointer[pipe] += 4; + } + } +} + +/******************************************************************************* +* Function Name: usb1_function_com_get_dmasize +* Description : Calculates access width of DMA transfer by the argument to +* : return as the Return Value. +* Arguments : uint32_t trncount : transfer byte +* : uint32_t dtptr : transfer data pointer +* Return Value : DMA transfer size : 0 8bit +* : : 1 16bit +* : : 2 32bit +*******************************************************************************/ +static uint32_t usb1_function_com_get_dmasize (uint32_t trncount, uint32_t dtptr) +{ + uint32_t size; + + if (((trncount & 0x0001) != 0) || ((dtptr & 0x00000001) != 0)) + { + /* When transfer byte count is odd */ + /* or transfer data area is 8-bit alignment */ + size = 0; /* 8bit */ + } + else if (((trncount & 0x0003) != 0) || ((dtptr & 0x00000003) != 0)) + { + /* When the transfer byte count is multiples of 2 */ + /* or the transfer data area is 16-bit alignment */ + size = 1; /* 16bit */ + } + else + { + /* When the transfer byte count is multiples of 4 */ + /* or the transfer data area is 32-bit alignment */ + size = 2; /* 32bit */ + } + + return size; +} + +/******************************************************************************* +* Function Name: usb1_function_get_mbw +* Description : Calculates access width of DMA to return the value set in MBW. +* Arguments : uint32_t trncount : transfer byte +* : uint32_t dtptr : transfer data pointer +* Return Value : FIFO transfer size : USB_FUNCTION_BITMBW_8 8bit +* : : USB_FUNCTION_BITMBW_16 16bit +* : : USB_FUNCTION_BITMBW_32 32bit +*******************************************************************************/ +uint16_t usb1_function_get_mbw (uint32_t trncount, uint32_t dtptr) +{ + uint32_t size; + uint16_t mbw; + + size = usb1_function_com_get_dmasize(trncount, dtptr); + + if (size == 0) + { + /* 8bit */ + mbw = USB_FUNCTION_BITMBW_8; + } + else if (size == 1) + { + /* 16bit */ + mbw = USB_FUNCTION_BITMBW_16; + } + else + { + /* 32bit */ + mbw = USB_FUNCTION_BITMBW_32; + } + + return mbw; +} + +/******************************************************************************* +* Function Name: usb1_function_set_transaction_counter +* Description : Sets transaction counter by the argument(PIPEnTRN). +* : Clears transaction before setting to enable transaction counter setting. +* Arguments : uint16_t pipe ; Pipe number +* : uint32_t bsize : Data transfer size +* Return Value : none +*******************************************************************************/ +static void usb1_function_set_transaction_counter (uint16_t pipe, uint32_t bsize) +{ + uint16_t mxps; + uint16_t cnt; + + if (bsize == 0) + { + return; + } + + mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */ + + if ((bsize % mxps) == 0) + { + cnt = (uint16_t)(bsize / mxps); + } + else + { + cnt = (uint16_t)((bsize / mxps) + 1); + } + + switch (pipe) + { + case USB_FUNCTION_PIPE1: + RZA_IO_RegWrite_16(&USB201.PIPE1TRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + USB201.PIPE1TRN = cnt; + RZA_IO_RegWrite_16(&USB201.PIPE1TRE, + 1, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + break; + + case USB_FUNCTION_PIPE2: + RZA_IO_RegWrite_16(&USB201.PIPE2TRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + USB201.PIPE2TRN = cnt; + RZA_IO_RegWrite_16(&USB201.PIPE2TRE, + 1, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + break; + + case USB_FUNCTION_PIPE3: + RZA_IO_RegWrite_16(&USB201.PIPE3TRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + USB201.PIPE3TRN = cnt; + RZA_IO_RegWrite_16(&USB201.PIPE3TRE, + 1, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + break; + + case USB_FUNCTION_PIPE4: + RZA_IO_RegWrite_16(&USB201.PIPE4TRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + USB201.PIPE4TRN = cnt; + RZA_IO_RegWrite_16(&USB201.PIPE4TRE, + 1, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + break; + + case USB_FUNCTION_PIPE5: + RZA_IO_RegWrite_16(&USB201.PIPE5TRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + USB201.PIPE5TRN = cnt; + RZA_IO_RegWrite_16(&USB201.PIPE5TRE, + 1, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + break; + + case USB_FUNCTION_PIPE9: + RZA_IO_RegWrite_16(&USB201.PIPE9TRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + USB201.PIPE9TRN = cnt; + RZA_IO_RegWrite_16(&USB201.PIPE9TRE, + 1, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + break; + + case USB_FUNCTION_PIPEA: + RZA_IO_RegWrite_16(&USB201.PIPEATRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + USB201.PIPEATRN = cnt; + RZA_IO_RegWrite_16(&USB201.PIPEATRE, + 1, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + break; + + case USB_FUNCTION_PIPEB: + RZA_IO_RegWrite_16(&USB201.PIPEBTRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + USB201.PIPEBTRN = cnt; + RZA_IO_RegWrite_16(&USB201.PIPEBTRE, + 1, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + break; + + case USB_FUNCTION_PIPEC: + RZA_IO_RegWrite_16(&USB201.PIPECTRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + USB201.PIPECTRN = cnt; + RZA_IO_RegWrite_16(&USB201.PIPECTRE, + 1, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + break; + + case USB_FUNCTION_PIPED: + RZA_IO_RegWrite_16(&USB201.PIPEDTRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + USB201.PIPEDTRN = cnt; + RZA_IO_RegWrite_16(&USB201.PIPEDTRE, + 1, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + break; + + case USB_FUNCTION_PIPEE: + RZA_IO_RegWrite_16(&USB201.PIPEETRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + USB201.PIPEETRN = cnt; + RZA_IO_RegWrite_16(&USB201.PIPEETRE, + 1, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + break; + + case USB_FUNCTION_PIPEF: + RZA_IO_RegWrite_16(&USB201.PIPEFTRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + USB201.PIPEFTRN = cnt; + RZA_IO_RegWrite_16(&USB201.PIPEFTRE, + 1, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + break; + + default: + break; + } +} + +/******************************************************************************* +* Function Name: usb1_function_clear_transaction_counter +* Description : Clears the transaction counter by the argument. +* : After executing this function, the transaction counter is invalid. +* Arguments : uint16_t pipe ; Pipe number +* Return Value : none +*******************************************************************************/ +void usb1_function_clear_transaction_counter (uint16_t pipe) +{ + switch (pipe) + { + case USB_FUNCTION_PIPE1: + RZA_IO_RegWrite_16(&USB201.PIPE1TRE, + 0, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + RZA_IO_RegWrite_16(&USB201.PIPE1TRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + break; + + case USB_FUNCTION_PIPE2: + RZA_IO_RegWrite_16(&USB201.PIPE2TRE, + 0, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + RZA_IO_RegWrite_16(&USB201.PIPE2TRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + break; + + case USB_FUNCTION_PIPE3: + RZA_IO_RegWrite_16(&USB201.PIPE3TRE, + 0, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + RZA_IO_RegWrite_16(&USB201.PIPE3TRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + break; + + case USB_FUNCTION_PIPE4: + RZA_IO_RegWrite_16(&USB201.PIPE4TRE, + 0, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + RZA_IO_RegWrite_16(&USB201.PIPE4TRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + break; + + case USB_FUNCTION_PIPE5: + RZA_IO_RegWrite_16(&USB201.PIPE5TRE, + 0, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + RZA_IO_RegWrite_16(&USB201.PIPE5TRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + break; + + case USB_FUNCTION_PIPE9: + RZA_IO_RegWrite_16(&USB201.PIPE9TRE, + 0, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + RZA_IO_RegWrite_16(&USB201.PIPE9TRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + break; + + case USB_FUNCTION_PIPEA: + RZA_IO_RegWrite_16(&USB201.PIPEATRE, + 0, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + RZA_IO_RegWrite_16(&USB201.PIPEATRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + break; + + case USB_FUNCTION_PIPEB: + RZA_IO_RegWrite_16(&USB201.PIPEBTRE, + 0, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + RZA_IO_RegWrite_16(&USB201.PIPEBTRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + break; + + case USB_FUNCTION_PIPEC: + RZA_IO_RegWrite_16(&USB201.PIPECTRE, + 0, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + RZA_IO_RegWrite_16(&USB201.PIPECTRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + break; + + case USB_FUNCTION_PIPED: + RZA_IO_RegWrite_16(&USB201.PIPEDTRE, + 0, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + RZA_IO_RegWrite_16(&USB201.PIPEDTRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + break; + + case USB_FUNCTION_PIPEE: + RZA_IO_RegWrite_16(&USB201.PIPEETRE, + 0, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + RZA_IO_RegWrite_16(&USB201.PIPEETRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + break; + + case USB_FUNCTION_PIPEF: + RZA_IO_RegWrite_16(&USB201.PIPEFTRE, + 0, + USB_PIPEnTRE_TRENB_SHIFT, + USB_PIPEnTRE_TRENB); + RZA_IO_RegWrite_16(&USB201.PIPEFTRE, + 1, + USB_PIPEnTRE_TRCLR_SHIFT, + USB_PIPEnTRE_TRCLR); + break; + + default: + break; + } +} + +/******************************************************************************* +* Function Name: usb1_function_stop_transfer +* Description : Stops the USB transfer in the pipe specified by the argument. +* : After stopping the USB transfer, clears the buffer allocated in +* : the pipe. +* : After executing this function, allocation in FIF0 becomes USB_FUNCTION_PIPE0; +* : invalid. After executing this function, BRDY/NRDY/BEMP interrupt +* : in the corresponding pipe becomes invalid. Sequence bit is also +* : cleared. +* Arguments : uint16_t pipe ; Pipe Number +* Return Value : none +*******************************************************************************/ +void usb1_function_stop_transfer (uint16_t pipe) +{ + uint16_t usefifo; + uint32_t remain; + uint16_t fifo; + + usb1_function_set_pid_nak(pipe); + + usefifo = (uint16_t)(g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE); + switch (usefifo) + { + case USB_FUNCTION_D0FIFO_USE: + usb1_function_clear_transaction_counter(pipe); + USB201.D0FIFOCTR = USB_FUNCTION_BITBCLR; /* Buffer Clear */ + fifo = USB_FUNCTION_D0USE; + break; + + case USB_FUNCTION_D1FIFO_USE: + usb1_function_clear_transaction_counter(pipe); + USB201.D1FIFOCTR = USB_FUNCTION_BITBCLR; /* Buffer Clear */ + fifo = USB_FUNCTION_D1USE; + break; + + case USB_FUNCTION_D0FIFO_DMA: + remain = Userdef_USB_usb1_function_stop_dma0(); + usb1_function_dma_stop_d0(pipe, remain); + usb1_function_clear_transaction_counter(pipe); + USB201.D0FIFOCTR = USB_FUNCTION_BITBCLR; /* Buffer Clear */ + fifo = USB_FUNCTION_D0DMA; + break; + + case USB_FUNCTION_D1FIFO_DMA: + remain = Userdef_USB_usb1_function_stop_dma1(); + usb1_function_dma_stop_d1(pipe, remain); + usb1_function_clear_transaction_counter(pipe); + USB201.D1FIFOCTR = USB_FUNCTION_BITBCLR; /* Buffer Clear */ + fifo = USB_FUNCTION_D1DMA; + break; + + default: + usb1_function_clear_transaction_counter(pipe); + USB201.CFIFOCTR = USB_FUNCTION_BITBCLR; /* Buffer Clear */ + fifo = USB_FUNCTION_CUSE; + break; + } + + usb1_function_set_curpipe(USB_FUNCTION_PIPE0, fifo, DEVDRV_USBF_NO, USB_FUNCTION_BITMBW_16); + + /* Interrupt of pipe set is disabled */ + usb1_function_disable_brdy_int(pipe); + usb1_function_disable_nrdy_int(pipe); + usb1_function_disable_bemp_int(pipe); + + usb1_function_aclrm(pipe); + usb1_function_set_csclr(pipe); + + if ( g_usb1_function_pipe_status[pipe] == DEVDRV_USBF_PIPE_WAIT ) + { + g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_NORES; + } +} + +/******************************************************************************* +* Function Name: usb1_function_set_dfacc_d0 +* Description : Sets the DFACC setting value in D0FIFO using the transfer size. +* Arguments : uint16_t mbw ; MBW +* : uint16_t count ; data count +* Return Value : DFACC Access mode +*******************************************************************************/ +static uint16_t usb1_function_set_dfacc_d0 (uint16_t mbw, uint32_t count) +{ + uint16_t dfacc = 0; + +#ifndef __USB_FUNCTION_DF_ACC_ENABLE__ + RZA_IO_RegWrite_16(&USB201.D0FBCFG, + 0, + USB_DnFBCFG_DFACC_SHIFT, + USB_DnFBCFG_DFACC); + RZA_IO_RegWrite_16(&USB201.D0FBCFG, + 0, + USB_DnFBCFG_TENDE_SHIFT, + USB_DnFBCFG_TENDE); + dfacc = 0; +#else + if (mbw == USB_FUNCTION_BITMBW_32) + { + if ((count % 32) == 0) + { + /* 32byte transfer */ + RZA_IO_RegWrite_16(&USB201.D0FBCFG, + 2, + USB_DnFBCFG_DFACC_SHIFT, + USB_DnFBCFG_DFACC); + RZA_IO_RegWrite_16(&USB201.D0FBCFG, + 0, + USB_DnFBCFG_TENDE_SHIFT, + USB_DnFBCFG_TENDE); + dfacc = 2; + } + else if ((count % 16) == 0) + { + /* 16byte transfer */ + RZA_IO_RegWrite_16(&USB201.D0FBCFG, + 1, + USB_DnFBCFG_DFACC_SHIFT, + USB_DnFBCFG_DFACC); + RZA_IO_RegWrite_16(&USB201.D0FBCFG, + 0, + USB_DnFBCFG_TENDE_SHIFT, + USB_DnFBCFG_TENDE); + dfacc = 1; + } + else + { + RZA_IO_RegWrite_16(&USB201.D0FBCFG, + 0, + USB_DnFBCFG_DFACC_SHIFT, + USB_DnFBCFG_DFACC); + RZA_IO_RegWrite_16(&USB201.D0FBCFG, + 0, + USB_DnFBCFG_TENDE_SHIFT, + USB_DnFBCFG_TENDE); + dfacc = 0; + } + } + else if (mbw == USB_FUNCTION_BITMBW_16) + { + RZA_IO_RegWrite_16(&USB201.D0FBCFG, + 0, + USB_DnFBCFG_DFACC_SHIFT, + USB_DnFBCFG_DFACC); + RZA_IO_RegWrite_16(&USB201.D0FBCFG, + 0, + USB_DnFBCFG_TENDE_SHIFT, + USB_DnFBCFG_TENDE); + dfacc = 0; + } + else + { + RZA_IO_RegWrite_16(&USB201.D0FBCFG, + 0, + USB_DnFBCFG_DFACC_SHIFT, + USB_DnFBCFG_DFACC); + RZA_IO_RegWrite_16(&USB201.D0FBCFG, + 0, + USB_DnFBCFG_TENDE_SHIFT, + USB_DnFBCFG_TENDE); + dfacc = 0; + } +#endif + return dfacc; +} + +/******************************************************************************* +* Function Name: usb1_function_set_dfacc_d1 +* Description : Set the DFACC setting value in D1FIFO using the transfer size. +* Arguments : uint16_t mbw ; MBW +* : uint16_t count ; data count +* Return Value : DFACC Access mode +*******************************************************************************/ +static uint16_t usb1_function_set_dfacc_d1 (uint16_t mbw, uint32_t count) +{ + uint16_t dfacc = 0; + +#ifndef __USB_FUNCTION_DF_ACC_ENABLE__ + RZA_IO_RegWrite_16(&USB201.D1FBCFG, + 0, + USB_DnFBCFG_DFACC_SHIFT, + USB_DnFBCFG_DFACC); + RZA_IO_RegWrite_16(&USB201.D1FBCFG, + 0, + USB_DnFBCFG_TENDE_SHIFT, + USB_DnFBCFG_TENDE); + dfacc = 0; +#else + if (mbw == USB_FUNCTION_BITMBW_32) + { + if ((count % 32) == 0) + { + /* 32byte transfer */ + RZA_IO_RegWrite_16(&USB201.D1FBCFG, + 2, + USB_DnFBCFG_DFACC_SHIFT, + USB_DnFBCFG_DFACC); + RZA_IO_RegWrite_16(&USB201.D1FBCFG, + 0, + USB_DnFBCFG_TENDE_SHIFT, + USB_DnFBCFG_TENDE); + dfacc = 2; + } + else if ((count % 16) == 0) + { + /* 16byte transfer */ + RZA_IO_RegWrite_16(&USB201.D1FBCFG, + 1, + USB_DnFBCFG_DFACC_SHIFT, + USB_DnFBCFG_DFACC); + RZA_IO_RegWrite_16(&USB201.D1FBCFG, + 0, + USB_DnFBCFG_TENDE_SHIFT, + USB_DnFBCFG_TENDE); + dfacc = 1; + } + else + { + RZA_IO_RegWrite_16(&USB201.D1FBCFG, + 0, + USB_DnFBCFG_DFACC_SHIFT, + USB_DnFBCFG_DFACC); + RZA_IO_RegWrite_16(&USB201.D1FBCFG, + 0, + USB_DnFBCFG_TENDE_SHIFT, + USB_DnFBCFG_TENDE); + dfacc = 0; + } + } + else if (mbw == USB_FUNCTION_BITMBW_16) + { + RZA_IO_RegWrite_16(&USB201.D1FBCFG, + 0, + USB_DnFBCFG_DFACC_SHIFT, + USB_DnFBCFG_DFACC); + RZA_IO_RegWrite_16(&USB201.D1FBCFG, + 0, + USB_DnFBCFG_TENDE_SHIFT, + USB_DnFBCFG_TENDE); + dfacc = 0; + } + else + { + RZA_IO_RegWrite_16(&USB201.D1FBCFG, + 0, + USB_DnFBCFG_DFACC_SHIFT, + USB_DnFBCFG_DFACC); + RZA_IO_RegWrite_16(&USB201.D1FBCFG, + 0, + USB_DnFBCFG_TENDE_SHIFT, + USB_DnFBCFG_TENDE); + dfacc = 0; + } +#endif + + return dfacc; +} + +/* End of File */