USB device stack
Dependents: mbed-mX-USB-TEST1 USBMSD_SD_HID_HelloWorld HidTest MIDI_usb_bridge ... more
Legacy Warning
This is an mbed 2 library. To learn more about mbed OS 5, visit the docs.
Pull requests against this repository are no longer supported. Please raise against mbed OS 5 as documented above.
Diff: targets/TARGET_Freescale/USBHAL_KL25Z.cpp
- Revision:
- 71:53949e6131f6
diff -r 2c525a50f1b6 -r 53949e6131f6 targets/TARGET_Freescale/USBHAL_KL25Z.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/TARGET_Freescale/USBHAL_KL25Z.cpp Thu Jul 27 12:14:04 2017 +0100 @@ -0,0 +1,507 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#if defined(TARGET_KL25Z) | defined(TARGET_KL43Z) | defined(TARGET_KL46Z) | defined(TARGET_K20D50M) | defined(TARGET_K64F) | defined(TARGET_K22F) | defined(TARGET_TEENSY3_1) + +#if defined(TARGET_KSDK2_MCUS) +#include "fsl_common.h" +#endif +#include "USBHAL.h" + +USBHAL * USBHAL::instance; + +static volatile int epComplete = 0; + +// Convert physical endpoint number to register bit +#define EP(endpoint) (1<<(endpoint)) + +// Convert physical to logical +#define PHY_TO_LOG(endpoint) ((endpoint)>>1) + +// Get endpoint direction +#define IN_EP(endpoint) ((endpoint) & 1U ? true : false) +#define OUT_EP(endpoint) ((endpoint) & 1U ? false : true) + +#define BD_OWN_MASK (1<<7) +#define BD_DATA01_MASK (1<<6) +#define BD_KEEP_MASK (1<<5) +#define BD_NINC_MASK (1<<4) +#define BD_DTS_MASK (1<<3) +#define BD_STALL_MASK (1<<2) + +#define TX 1 +#define RX 0 +#define ODD 0 +#define EVEN 1 +// this macro waits a physical endpoint number +#define EP_BDT_IDX(ep, dir, odd) (((ep * 4) + (2 * dir) + (1 * odd))) + +#define SETUP_TOKEN 0x0D +#define IN_TOKEN 0x09 +#define OUT_TOKEN 0x01 +#define TOK_PID(idx) ((bdt[idx].info >> 2) & 0x0F) + +// for each endpt: 8 bytes +typedef struct BDT { + uint8_t info; // BD[0:7] + uint8_t dummy; // RSVD: BD[8:15] + uint16_t byte_count; // BD[16:32] + uint32_t address; // Addr +} BDT; + +// there are: +// * 4 bidirectionnal endpt -> 8 physical endpt +// * as there are ODD and EVEN buffer -> 8*2 bdt +MBED_ALIGN(512) BDT bdt[NUMBER_OF_PHYSICAL_ENDPOINTS * 2]; // 512 bytes aligned! + +uint8_t * endpoint_buffer[NUMBER_OF_PHYSICAL_ENDPOINTS * 2]; + +static uint8_t set_addr = 0; +static uint8_t addr = 0; + +static uint32_t Data1 = 0x55555555; + +static uint32_t frameNumber() { + return((USB0->FRMNUML | (USB0->FRMNUMH << 8)) & 0x07FF); +} + +uint32_t USBHAL::endpointReadcore(uint8_t endpoint, uint8_t *buffer) { + return 0; +} + +USBHAL::USBHAL(void) { + // Disable IRQ + NVIC_DisableIRQ(USB0_IRQn); + +#if (defined(FSL_FEATURE_SOC_MPU_COUNT) && (FSL_FEATURE_SOC_MPU_COUNT > 0U)) + MPU->CESR=0; +#endif + // fill in callback array + epCallback[0] = &USBHAL::EP1_OUT_callback; + epCallback[1] = &USBHAL::EP1_IN_callback; + epCallback[2] = &USBHAL::EP2_OUT_callback; + epCallback[3] = &USBHAL::EP2_IN_callback; + epCallback[4] = &USBHAL::EP3_OUT_callback; + epCallback[5] = &USBHAL::EP3_IN_callback; + epCallback[6] = &USBHAL::EP4_OUT_callback; + epCallback[7] = &USBHAL::EP4_IN_callback; + +#if defined(TARGET_KL43Z) || defined(TARGET_K22F) || defined(TARGET_K64F) + // enable USBFS clock + CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcIrc48M, 48000000U); +#else + // choose usb src as PLL + SIM->SOPT2 &= ~SIM_SOPT2_PLLFLLSEL_MASK; + SIM->SOPT2 |= (SIM_SOPT2_USBSRC_MASK | (1 << SIM_SOPT2_PLLFLLSEL_SHIFT)); + + // enable OTG clock + SIM->SCGC4 |= SIM_SCGC4_USBOTG_MASK; +#endif + + // Attach IRQ + instance = this; + NVIC_SetVector(USB0_IRQn, (uint32_t)&_usbisr); + NVIC_EnableIRQ(USB0_IRQn); + + // USB Module Configuration + // Set BDT Base Register + USB0->BDTPAGE1 = (uint8_t)((uint32_t)bdt>>8); + USB0->BDTPAGE2 = (uint8_t)((uint32_t)bdt>>16); + USB0->BDTPAGE3 = (uint8_t)((uint32_t)bdt>>24); + + // Clear interrupt flag + USB0->ISTAT = 0xff; + + // USB Interrupt Enablers + USB0->INTEN |= USB_INTEN_TOKDNEEN_MASK | + USB_INTEN_SOFTOKEN_MASK | + USB_INTEN_ERROREN_MASK | + USB_INTEN_USBRSTEN_MASK; + + // Disable weak pull downs + USB0->USBCTRL &= ~(USB_USBCTRL_PDE_MASK | USB_USBCTRL_SUSP_MASK); + + USB0->USBTRC0 |= 0x40; + + /* Allocate control endpoint buffers */ + endpoint_buffer[EP_BDT_IDX(0, TX, ODD)] = (uint8_t *)malloc(MAX_PACKET_SIZE_EP0); + endpoint_buffer[EP_BDT_IDX(0, RX, ODD)] = (uint8_t *)malloc(MAX_PACKET_SIZE_EP0); +} + +USBHAL::~USBHAL(void) { } + +void USBHAL::connect(void) { + // enable USB + USB0->CTL |= USB_CTL_USBENSOFEN_MASK; + // Pull up enable + USB0->CONTROL |= USB_CONTROL_DPPULLUPNONOTG_MASK; + + // Allocate endpoint buffers; do allocate control endpoint buffers + for (int i = 4; i < (NUMBER_OF_PHYSICAL_ENDPOINTS * 2); i++) { + if ((i == EPISO_OUT) || (i == EPISO_IN)) { + endpoint_buffer[i] = (uint8_t *)malloc(MAX_PACKET_SIZE_EPISO); + } else { + endpoint_buffer[i] = (uint8_t *)malloc(MAX_PACKET_SIZE_EPBULK); + } + } +} + +void USBHAL::disconnect(void) { + // disable USB + USB0->CTL &= ~USB_CTL_USBENSOFEN_MASK; + // Pull up disable + USB0->CONTROL &= ~USB_CONTROL_DPPULLUPNONOTG_MASK; + + //Free buffers if required; do not free the control endpoint buffers + for (int i = 4; i < (NUMBER_OF_PHYSICAL_ENDPOINTS * 2); i++) { + free(endpoint_buffer[i]); + endpoint_buffer[i] = NULL; + } +} + +void USBHAL::configureDevice(void) { + // not needed +} + +void USBHAL::unconfigureDevice(void) { + // not needed +} + +void USBHAL::setAddress(uint8_t address) { + // we don't set the address now otherwise the usb controller does not ack + // we set a flag instead + // see usbisr when an IN token is received + set_addr = 1; + addr = address; +} + +bool USBHAL::realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t flags) { + uint32_t handshake_flag = 0; + uint8_t * buf; + + if (endpoint > NUMBER_OF_PHYSICAL_ENDPOINTS - 1) { + return false; + } + + uint32_t log_endpoint = PHY_TO_LOG(endpoint); + + if ((flags & ISOCHRONOUS) == 0) { + handshake_flag = USB_ENDPT_EPHSHK_MASK; + } + + if (IN_EP(endpoint)) { + buf = &endpoint_buffer[EP_BDT_IDX(log_endpoint, TX, ODD)][0]; + } else { + buf = &endpoint_buffer[EP_BDT_IDX(log_endpoint, RX, ODD)][0]; + } + + // IN endpt -> device to host (TX) + if (IN_EP(endpoint)) { + USB0->ENDPOINT[log_endpoint].ENDPT |= handshake_flag | // ep handshaking (not if iso endpoint) + USB_ENDPT_EPTXEN_MASK; // en TX (IN) tran + bdt[EP_BDT_IDX(log_endpoint, TX, ODD )].address = (uint32_t) buf; + bdt[EP_BDT_IDX(log_endpoint, TX, EVEN)].address = 0; + } + // OUT endpt -> host to device (RX) + else { + USB0->ENDPOINT[log_endpoint].ENDPT |= handshake_flag | // ep handshaking (not if iso endpoint) + USB_ENDPT_EPRXEN_MASK; // en RX (OUT) tran. + bdt[EP_BDT_IDX(log_endpoint, RX, ODD )].byte_count = maxPacket; + bdt[EP_BDT_IDX(log_endpoint, RX, ODD )].address = (uint32_t) buf; + bdt[EP_BDT_IDX(log_endpoint, RX, ODD )].info = BD_OWN_MASK | BD_DTS_MASK; + bdt[EP_BDT_IDX(log_endpoint, RX, EVEN)].info = 0; + } + + Data1 |= (1 << endpoint); + + return true; +} + +// read setup packet +void USBHAL::EP0setup(uint8_t *buffer) { + uint32_t sz; + endpointReadResult(EP0OUT, buffer, &sz); +} + +void USBHAL::EP0readStage(void) { + Data1 &= ~1UL; // set DATA0 + bdt[0].info = (BD_DTS_MASK | BD_OWN_MASK); +} + +void USBHAL::EP0read(void) { + uint32_t idx = EP_BDT_IDX(PHY_TO_LOG(EP0OUT), RX, 0); + bdt[idx].byte_count = MAX_PACKET_SIZE_EP0; +} + +uint32_t USBHAL::EP0getReadResult(uint8_t *buffer) { + uint32_t sz; + endpointReadResult(EP0OUT, buffer, &sz); + return sz; +} + +void USBHAL::EP0write(uint8_t *buffer, uint32_t size) { + endpointWrite(EP0IN, buffer, size); +} + +void USBHAL::EP0getWriteResult(void) { +} + +void USBHAL::EP0stall(void) { + stallEndpoint(EP0OUT); +} + +EP_STATUS USBHAL::endpointRead(uint8_t endpoint, uint32_t maximumSize) { + endpoint = PHY_TO_LOG(endpoint); + uint32_t idx = EP_BDT_IDX(endpoint, RX, 0); + bdt[idx].byte_count = maximumSize; + return EP_PENDING; +} + +EP_STATUS USBHAL::endpointReadResult(uint8_t endpoint, uint8_t * buffer, uint32_t *bytesRead) { + uint32_t n, sz, idx, setup = 0; + uint8_t not_iso; + uint8_t * ep_buf; + + uint32_t log_endpoint = PHY_TO_LOG(endpoint); + + if (endpoint > NUMBER_OF_PHYSICAL_ENDPOINTS - 1) { + return EP_INVALID; + } + + // if read on a IN endpoint -> error + if (IN_EP(endpoint)) { + return EP_INVALID; + } + + idx = EP_BDT_IDX(log_endpoint, RX, 0); + sz = bdt[idx].byte_count; + not_iso = USB0->ENDPOINT[log_endpoint].ENDPT & USB_ENDPT_EPHSHK_MASK; + + //for isochronous endpoint, we don't wait an interrupt + if ((log_endpoint != 0) && not_iso && !(epComplete & EP(endpoint))) { + return EP_PENDING; + } + + if ((log_endpoint == 0) && (TOK_PID(idx) == SETUP_TOKEN)) { + setup = 1; + } + + ep_buf = endpoint_buffer[idx]; + + for (n = 0; n < sz; n++) { + buffer[n] = ep_buf[n]; + } + + if (((Data1 >> endpoint) & 1) == ((bdt[idx].info >> 6) & 1)) { + if (setup && (buffer[6] == 0)) // if no setup data stage, + Data1 &= ~1UL; // set DATA0 + else + Data1 ^= (1 << endpoint); + } + + if (((Data1 >> endpoint) & 1)) { + bdt[idx].info = BD_DTS_MASK | BD_DATA01_MASK | BD_OWN_MASK; + } + else { + bdt[idx].info = BD_DTS_MASK | BD_OWN_MASK; + } + + USB0->CTL &= ~USB_CTL_TXSUSPENDTOKENBUSY_MASK; + *bytesRead = sz; + + epComplete &= ~EP(endpoint); + return EP_COMPLETED; +} + +EP_STATUS USBHAL::endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size) { + uint32_t idx, n; + uint8_t * ep_buf; + + if (endpoint > NUMBER_OF_PHYSICAL_ENDPOINTS - 1) { + return EP_INVALID; + } + + // if write on a OUT endpoint -> error + if (OUT_EP(endpoint)) { + return EP_INVALID; + } + + idx = EP_BDT_IDX(PHY_TO_LOG(endpoint), TX, 0); + bdt[idx].byte_count = size; + + ep_buf = endpoint_buffer[idx]; + + for (n = 0; n < size; n++) { + ep_buf[n] = data[n]; + } + + if ((Data1 >> endpoint) & 1) { + bdt[idx].info = BD_OWN_MASK | BD_DTS_MASK; + } else { + bdt[idx].info = BD_OWN_MASK | BD_DTS_MASK | BD_DATA01_MASK; + } + + Data1 ^= (1 << endpoint); + + return EP_PENDING; +} + +EP_STATUS USBHAL::endpointWriteResult(uint8_t endpoint) { + if (epComplete & EP(endpoint)) { + epComplete &= ~EP(endpoint); + return EP_COMPLETED; + } + + return EP_PENDING; +} + +void USBHAL::stallEndpoint(uint8_t endpoint) { + USB0->ENDPOINT[PHY_TO_LOG(endpoint)].ENDPT |= USB_ENDPT_EPSTALL_MASK; +} + +void USBHAL::unstallEndpoint(uint8_t endpoint) { + USB0->ENDPOINT[PHY_TO_LOG(endpoint)].ENDPT &= ~USB_ENDPT_EPSTALL_MASK; +} + +bool USBHAL::getEndpointStallState(uint8_t endpoint) { + uint8_t stall = (USB0->ENDPOINT[PHY_TO_LOG(endpoint)].ENDPT & USB_ENDPT_EPSTALL_MASK); + return (stall) ? true : false; +} + +void USBHAL::remoteWakeup(void) { + // [TODO] +} + + +void USBHAL::_usbisr(void) { + instance->usbisr(); +} + + +void USBHAL::usbisr(void) { + uint8_t i; + uint8_t istat = USB0->ISTAT; + + // reset interrupt + if (istat & USB_ISTAT_USBRST_MASK) { + // disable all endpt + for(i = 0; i < 16; i++) { + USB0->ENDPOINT[i].ENDPT = 0x00; + } + + // enable control endpoint + realiseEndpoint(EP0OUT, MAX_PACKET_SIZE_EP0, 0); + realiseEndpoint(EP0IN, MAX_PACKET_SIZE_EP0, 0); + + Data1 = 0x55555555; + USB0->CTL |= USB_CTL_ODDRST_MASK; + + USB0->ISTAT = 0xFF; // clear all interrupt status flags + USB0->ERRSTAT = 0xFF; // clear all error flags + USB0->ERREN = 0xFF; // enable error interrupt sources + USB0->ADDR = 0x00; // set default address + + // reset bus for USBDevice layer + busReset(); + + return; + } + + // resume interrupt + if (istat & USB_ISTAT_RESUME_MASK) { + USB0->ISTAT = USB_ISTAT_RESUME_MASK; + } + + // SOF interrupt + if (istat & USB_ISTAT_SOFTOK_MASK) { + USB0->ISTAT = USB_ISTAT_SOFTOK_MASK; + // SOF event, read frame number + SOF(frameNumber()); + } + + // stall interrupt + if (istat & 1<<7) { + if (USB0->ENDPOINT[0].ENDPT & USB_ENDPT_EPSTALL_MASK) + USB0->ENDPOINT[0].ENDPT &= ~USB_ENDPT_EPSTALL_MASK; + USB0->ISTAT |= USB_ISTAT_STALL_MASK; + } + + // token interrupt + if (istat & 1<<3) { + uint32_t num = (USB0->STAT >> 4) & 0x0F; + uint32_t dir = (USB0->STAT >> 3) & 0x01; + uint32_t ev_odd = (USB0->STAT >> 2) & 0x01; + int endpoint = (num << 1) | dir; + + // setup packet + if ((num == 0) && (TOK_PID((EP_BDT_IDX(num, dir, ev_odd))) == SETUP_TOKEN)) { + Data1 &= ~0x02; + bdt[EP_BDT_IDX(0, TX, EVEN)].info &= ~BD_OWN_MASK; + bdt[EP_BDT_IDX(0, TX, ODD)].info &= ~BD_OWN_MASK; + + // EP0 SETUP event (SETUP data received) + EP0setupCallback(); + + } else { + // OUT packet + if (TOK_PID((EP_BDT_IDX(num, dir, ev_odd))) == OUT_TOKEN) { + if (num == 0) + EP0out(); + else { + epComplete |= EP(endpoint); + if ((instance->*(epCallback[endpoint - 2]))()) { + epComplete &= ~EP(endpoint); + } + } + } + + // IN packet + if (TOK_PID((EP_BDT_IDX(num, dir, ev_odd))) == IN_TOKEN) { + if (num == 0) { + EP0in(); + if (set_addr == 1) { + USB0->ADDR = addr & 0x7F; + set_addr = 0; + } + } + else { + epComplete |= EP(endpoint); + if ((instance->*(epCallback[endpoint - 2]))()) { + epComplete &= ~EP(endpoint); + } + } + } + } + + USB0->ISTAT = USB_ISTAT_TOKDNE_MASK; + } + + // sleep interrupt + if (istat & 1<<4) { + USB0->ISTAT |= USB_ISTAT_SLEEP_MASK; + } + + // error interrupt + if (istat & USB_ISTAT_ERROR_MASK) { + USB0->ERRSTAT = 0xFF; + USB0->ISTAT |= USB_ISTAT_ERROR_MASK; + } +} + + +#endif