USB device stack
Dependents: mbed-mX-USB-TEST1 USBMSD_SD_HID_HelloWorld HidTest MIDI_usb_bridge ... more
Legacy Warning
This is an mbed 2 library. To learn more about mbed OS 5, visit the docs.
Pull requests against this repository are no longer supported. Please raise against mbed OS 5 as documented above.
targets/TARGET_RENESAS/TARGET_RZ_A1H/usb0/inc/usb0_function_api.h
- Committer:
- Kojto
- Date:
- 2017-07-27
- Revision:
- 71:53949e6131f6
File content as of revision 71:53949e6131f6:
/******************************************************************************* * DISCLAIMER * This software is supplied by Renesas Electronics Corporation and is only * intended for use with Renesas products. No other uses are authorized. This * software is owned by Renesas Electronics Corporation and is protected under * all applicable laws, including copyright laws. * THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING * THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT * LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE * AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. * TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS * ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE * FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR * ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE * BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. * Renesas reserves the right, without notice, to make changes to this software * and to discontinue the availability of this software. By using this software, * you agree to the additional terms and conditions found by accessing the * following link: * http://www.renesas.com/disclaimer * Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved. *******************************************************************************/ /******************************************************************************* * File Name : usb0_function_api.h * $Rev: 1116 $ * $Date:: 2014-07-09 16:29:19 +0900#$ * Description : RZ/A1H R7S72100 USB Sample Program *******************************************************************************/ #ifndef USB0_FUNCTION_API_H #define USB0_FUNCTION_API_H #ifdef __cplusplus extern "C" { #endif /******************************************************************************* Includes <System Includes> , "Project Includes" *******************************************************************************/ /******************************************************************************* Typedef definitions *******************************************************************************/ /******************************************************************************* Macro definitions *******************************************************************************/ /******************************************************************************* Variable Externs *******************************************************************************/ /******************************************************************************* Exported global variables and functions (to be accessed by other files) *******************************************************************************/ void usb0_api_function_init(uint8_t int_level, uint16_t mode, uint16_t clockmode); uint16_t usb0_api_function_IsConfigured(void); uint16_t usb0_function_GetDeviceState(void); uint16_t usb0_api_function_CtrlReadStart(uint32_t size, uint8_t *data); void usb0_api_function_CtrlWriteStart(uint32_t size, uint8_t *data); uint16_t usb0_api_function_start_send_transfer(uint16_t pipe, uint32_t size, uint8_t *data); uint16_t usb0_api_function_check_pipe_status(uint16_t pipe, uint32_t *size); void usb0_api_function_clear_pipe_status(uint16_t pipe); void usb0_api_function_start_receive_transfer(uint16_t pipe, uint32_t size, uint8_t *data); void usb0_api_function_set_pid_buf(uint16_t pipe); void usb0_api_function_set_pid_nak(uint16_t pipe); void usb0_api_function_set_pid_stall(uint16_t pipe); void usb0_api_function_clear_pid_stall(uint16_t pipe); uint16_t usb0_api_function_get_pid(uint16_t pipe); int32_t usb0_api_function_check_stall(uint16_t pipe); void usb0_api_function_set_sqclr(uint16_t pipe); void usb0_api_function_set_sqset(uint16_t pipe); void usb0_api_function_set_csclr(uint16_t pipe); void usb0_api_function_set_curpipe(uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw); void usb0_api_function_clear_brdy_sts(uint16_t pipe); void usb0_api_function_clear_bemp_sts(uint16_t pipe); void usb0_api_function_clear_nrdy_sts(uint16_t pipe); void usb0_function_ClearFeature(uint16_t type, uint16_t value, uint16_t index, uint16_t length); void usb0_function_SetFeature(uint16_t type, uint16_t value, uint16_t index, uint16_t length); void usb0_function_SetAddress(uint16_t type, uint16_t value, uint16_t index, uint16_t length); void usb0_function_SetDescriptor(uint16_t type, uint16_t value, uint16_t index, uint16_t length); void usb0_function_SetConfiguration(uint16_t type, uint16_t value, uint16_t index, uint16_t length); void usb0_function_SetInterface(uint16_t type, uint16_t value, uint16_t index, uint16_t length); void usb0_function_SynchFrame(uint16_t type, uint16_t value, uint16_t index, uint16_t length); void usb0_function_GetStatus(uint16_t type, uint16_t value, uint16_t index, uint16_t length); void usb0_function_GetDescriptor(uint16_t type, uint16_t value, uint16_t index, uint16_t length); void usb0_function_GetConfiguration(uint16_t type, uint16_t value, uint16_t index, uint16_t length); void usb0_function_GetInterface(uint16_t type, uint16_t value, uint16_t index, uint16_t length); void usb0_function_Resrv_0(uint16_t type, uint16_t value, uint16_t index, uint16_t length); void usb0_function_Resrv_123(uint16_t type, uint16_t value, uint16_t index, uint16_t length); void usb0_function_Resrv_4(uint16_t type, uint16_t value, uint16_t index, uint16_t length); void usb0_function_Resrv_5(uint16_t type, uint16_t value, uint16_t index, uint16_t length); #ifdef __cplusplus } #endif #endif /* USB0_FUNCTION_API_H */ /* End of File */