Wang Xinglu
High level Bluetooth Low Energy API and radio abstraction layer
Fork of
BLE_API
by 
Bluetooth Low Energy
Diff: public/BLE.h
- Revision:
- 710:b2e1a2660ec2
- Parent:
- 709:77f6fc6999cd
- Child:
- 711:ea0c4bf9ec99
--- a/public/BLE.h Fri Jun 19 15:53:06 2015 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,1342 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __BLE_H__
-#define __BLE_H__
-
-#include "blecommon.h"
-#include "Gap.h"
-#include "GattServer.h"
-#include "GattClient.h"
-#include "BLEInstanceBase.h"
-
-/**
- * The base class used to abstract away BLE capable radio transceivers or SOCs,
- * to enable this BLE API to work with any radio transparently.
- */
-class BLE
-{
-public:
- /**
- * Initialize the BLE controller. This should be called before using
- * anything else in the BLE_API.
- *
- * init() hands control to the underlying BLE module to accomplish
- * initialization. This initialization may tacitly depend on other hardware
- * setup (such as clocks or power-modes) which happens early on during
- * system startup. It may not be safe to call init() from global static
- * context where ordering is compiler specific and can't be guaranteed--it
- * is safe to call BLE::init() from within main().
- */
- ble_error_t init();
-
- /**
- * Purge the BLE stack of GATT and GAP state. init() must be called
- * afterwards to re-instate services and GAP state. This API offers a way to
- * repopulate the GATT database with new services and characteristics.
- */
- ble_error_t shutdown(void) {
- clearAdvertisingPayload();
- return transport->shutdown();
- }
-
- /**
- * This call allows the application to get the BLE stack version information.
- *
- * @return A pointer to a const string representing the version.
- * Note: The string is owned by the BLE_API.
- */
- const char *getVersion(void) {
- return transport->getVersion();
- }
-
- /*
- * Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
- * going through this accessor.
- */
- const Gap &gap() const {
- return transport->getGap();
- }
- Gap &gap() {
- return transport->getGap();
- }
-
- /*
- * Accessors to GATT Server. Please refer to GattServer.h. All GATTServer related
- * functionality requires going through this accessor.
- */
- const GattServer& gattServer() const {
- return transport->getGattServer();
- }
- GattServer& gattServer() {
- return transport->getGattServer();
- }
-
- /*
- * Accessors to GATT Client. Please refer to GattClient.h. All GATTClient related
- * functionality requires going through this accessor.
- */
- const GattClient& gattClient() const {
- return transport->getGattClient();
- }
- GattClient& gattClient() {
- return transport->getGattClient();
- }
-
- /*
- * Accessors to Security Manager. Please refer to SecurityManager.h. All
- * SecurityManager related functionality requires going through this
- * accessor.
- */
- const SecurityManager& securityManager() const {
- return transport->getSecurityManager();
- }
- SecurityManager& securityManager() {
- return transport->getSecurityManager();
- }
-
- /**
- * Yield control to the BLE stack or to other tasks waiting for events. This
- * is a sleep function which will return when there is an application
- * specific interrupt, but the MCU might wake up several times before
- * returning (to service the stack). This is not always interchangeable with
- * WFE().
- */
- void waitForEvent(void) {
- transport->waitForEvent();
- }
-
- /*
- * Deprecation alert!
- * All of the following are deprecated and may be dropped in a future
- * release. Documentation should refer to alternative APIs.
- */
-
- /* GAP specific APIs. */
-public:
- /**
- * Set the BTLE MAC address and type.
- * @return BLE_ERROR_NONE on success.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAddress(...) should be replaced with
- * ble.gap().setAddress(...).
- */
- ble_error_t setAddress(Gap::AddressType_t type, const Gap::Address_t address) {
- return gap().setAddress(type, address);
- }
-
- /**
- * Fetch the BTLE MAC address and type.
- * @return BLE_ERROR_NONE on success.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getAddress(...) should be replaced with
- * ble.gap().getAddress(...).
- */
- ble_error_t getAddress(Gap::AddressType_t *typeP, Gap::Address_t address) {
- return gap().getAddress(typeP, address);
- }
-
- /**
- * Set the GAP advertising mode to use for this device.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAdvertisingType(...) should be replaced with
- * ble.gap().setAdvertisingType(...).
- */
- void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
- gap().setAdvertisingType(advType);
- }
-
- /**
- * @param[in] interval
- * Advertising interval in units of milliseconds. Advertising
- * is disabled if interval is 0. If interval is smaller than
- * the minimum supported value, then the minimum supported
- * value is used instead. This minimum value can be discovered
- * using getMinAdvertisingInterval().
- *
- * This field must be set to 0 if connectionMode is equal
- * to ADV_CONNECTABLE_DIRECTED.
- *
- * @note: Decreasing this value will allow central devices to detect a
- * peripheral faster at the expense of more power being used by the radio
- * due to the higher data transmit rate.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAdvertisingInterval(...) should be replaced with
- * ble.gap().setAdvertisingInterval(...).
- *
- * @note: [WARNING] This API previously used 0.625ms as the unit for its
- * 'interval' argument. That required an explicit conversion from
- * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
- * no longer required as the new units are milliseconds. Any application
- * code depending on the old semantics would need to be updated accordingly.
- */
- void setAdvertisingInterval(uint16_t interval) {
- gap().setAdvertisingInterval(interval);
- }
-
- /**
- * @return Minimum Advertising interval in milliseconds.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getMinAdvertisingInterval(...) should be replaced with
- * ble.gap().getMinAdvertisingInterval(...).
- */
- uint16_t getMinAdvertisingInterval(void) const {
- return gap().getMinAdvertisingInterval();
- }
-
- /**
- * @return Minimum Advertising interval in milliseconds for non-connectible mode.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
- * ble.gap().getMinNonConnectableAdvertisingInterval(...).
- */
- uint16_t getMinNonConnectableAdvertisingInterval(void) const {
- return gap().getMinNonConnectableAdvertisingInterval();
- }
-
- /**
- * @return Maximum Advertising interval in milliseconds.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getMaxAdvertisingInterval(...) should be replaced with
- * ble.gap().getMaxAdvertisingInterval(...).
- */
- uint16_t getMaxAdvertisingInterval(void) const {
- return gap().getMaxAdvertisingInterval();
- }
-
- /**
- * @param[in] timeout
- * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
- * and 16383). Use 0 to disable the advertising timeout.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAdvertisingTimeout(...) should be replaced with
- * ble.gap().setAdvertisingTimeout(...).
- */
- void setAdvertisingTimeout(uint16_t timeout) {
- gap().setAdvertisingTimeout(timeout);
- }
-
- /**
- * Setup a particular, user-constructed set of advertisement parameters for
- * the underlying stack. It would be uncommon for this API to be used
- * directly; there are other APIs to tweak advertisement parameters
- * individually (see above).
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAdvertisingParams(...) should be replaced with
- * ble.gap().setAdvertisingParams(...).
- */
- void setAdvertisingParams(const GapAdvertisingParams &advParams) {
- gap().setAdvertisingParams(advParams);
- }
-
- /**
- * @return Read back advertising parameters. Useful for storing and
- * restoring parameters rapidly.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getAdvertisingParams(...) should be replaced with
- * ble.gap().getAdvertisingParams(...).
- */
- const GapAdvertisingParams &getAdvertisingParams(void) const {
- return gap().getAdvertisingParams();
- }
-
- /**
- * Accumulate an AD structure in the advertising payload. Please note that
- * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
- * as an additional 31 bytes if the advertising payload proves to be too
- * small.
- *
- * @param[in] flags
- * The flags to be added. Please refer to
- * GapAdvertisingData::Flags for valid flags. Multiple
- * flags may be specified in combination.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.accumulateAdvertisingPayload(flags) should be replaced with
- * ble.gap().accumulateAdvertisingPayload(flags).
- */
- ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
- return gap().accumulateAdvertisingPayload(flags);
- }
-
- /**
- * Accumulate an AD structure in the advertising payload. Please note that
- * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
- * as an additional 31 bytes if the advertising payload proves to be too
- * small.
- *
- * @param[in] app
- * The appearance of the peripheral.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.accumulateAdvertisingPayload(appearance) should be replaced with
- * ble.gap().accumulateAdvertisingPayload(appearance).
- */
- ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
- return gap().accumulateAdvertisingPayload(app);
- }
-
- /**
- * Accumulate an AD structure in the advertising payload. Please note that
- * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
- * as an additional 31 bytes if the advertising payload proves to be too
- * small.
- *
- * @param[in] app
- * The max transmit power to be used by the controller. This
- * is only a hint.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
- * ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
- */
- ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
- return gap().accumulateAdvertisingPayloadTxPower(power);
- }
-
- /**
- * Accumulate a variable length byte-stream as an AD structure in the
- * advertising payload. Please note that the payload is limited to 31 bytes.
- * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
- * advertising payload proves to be too small.
- *
- * @param type The type which describes the variable length data.
- * @param data data bytes.
- * @param len length of data.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.accumulateAdvertisingPayload(...) should be replaced with
- * ble.gap().accumulateAdvertisingPayload(...).
- */
- ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
- return gap().accumulateAdvertisingPayload(type, data, len);
- }
-
- /**
- * Setup a particular, user-constructed advertisement payload for the
- * underlying stack. It would be uncommon for this API to be used directly;
- * there are other APIs to build an advertisement payload (see above).
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAdvertisingData(...) should be replaced with
- * ble.gap().setAdvertisingPayload(...).
- */
- ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
- return gap().setAdvertisingPayload(advData);
- }
-
- /**
- * @return Read back advertising data. Useful for storing and
- * restoring payload.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getAdvertisingData(...) should be replaced with
- * ble.gap().getAdvertisingPayload()(...).
- */
- const GapAdvertisingData &getAdvertisingData(void) const {
- return gap().getAdvertisingPayload();
- }
-
- /**
- * Reset any advertising payload prepared from prior calls to
- * accumulateAdvertisingPayload(). This automatically propagates the re-
- * initialized adv payload to the underlying stack.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.clearAdvertisingPayload(...) should be replaced with
- * ble.gap().clearAdvertisingPayload(...).
- */
- void clearAdvertisingPayload(void) {
- gap().clearAdvertisingPayload();
- }
-
- /**
- * This API is *deprecated* and resolves to a no-operation. It is left here
- * to allow older code to compile. Please avoid using this API in new code.
- * This API will be dropped in a future release.
- *
- * Formerly, it would be used to dynamically reset the accumulated advertising
- * payload and scanResponse; to do this, the application would clear and re-
- * accumulate a new advertising payload (and scanResponse) before using this
- * API. Updates to the underlying advertisement payload now happen
- * implicitly.
- */
- ble_error_t setAdvertisingPayload(void) {
- return BLE_ERROR_NONE;
- }
-
- /**
- * Accumulate a variable length byte-stream as an AD structure in the
- * scanResponse payload.
- *
- * @param[in] type The type which describes the variable length data.
- * @param[in] data data bytes.
- * @param[in] len length of data.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.accumulateScanResponse(...) should be replaced with
- * ble.gap().accumulateScanResponse(...).
- */
- ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
- return gap().accumulateScanResponse(type, data, len);
- }
-
- /**
- * Reset any scan response prepared from prior calls to
- * accumulateScanResponse().
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.clearScanResponse(...) should be replaced with
- * ble.gap().clearScanResponse(...).
- */
- void clearScanResponse(void) {
- gap().clearScanResponse();
- }
-
- /**
- * Start advertising.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.startAdvertising(...) should be replaced with
- * ble.gap().startAdvertising(...).
- */
- ble_error_t startAdvertising(void) {
- return gap().startAdvertising();
- }
-
- /**
- * Stop advertising.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.stopAdvertising(...) should be replaced with
- * ble.gap().stopAdvertising(...).
- */
- ble_error_t stopAdvertising(void) {
- return gap().stopAdvertising();
- }
-
- /**
- * Setup parameters for GAP scanning--i.e. observer mode.
- * @param[in] interval
- * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
- * @param[in] window
- * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
- * @param[in] timeout
- * Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
- * @param[in] activeScanning
- * Set to True if active-scanning is required. This is used to fetch the
- * scan response from a peer if possible.
- *
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- *
- * @Note: The scan interval and window are recommendations to the BLE stack.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setScanParams(...) should be replaced with
- * ble.gap().setScanParams(...).
- */
- ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
- uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
- uint16_t timeout = 0,
- bool activeScanning = false) {
- return gap().setScanParams(interval, window, timeout, activeScanning);
- }
-
- /**
- * Setup the scanInterval parameter for GAP scanning--i.e. observer mode.
- * @param[in] interval
- * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
- *
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setScanInterval(interval) should be replaced with
- * ble.gap().setScanInterval(interval).
- */
- ble_error_t setScanInterval(uint16_t interval) {
- return gap().setScanInterval(interval);
- }
-
- /**
- * Setup the scanWindow parameter for GAP scanning--i.e. observer mode.
- * @param[in] window
- * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
- *
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setScanWindow(window) should be replaced with
- * ble.gap().setScanWindow(window).
- */
- ble_error_t setScanWindow(uint16_t window) {
- return gap().setScanWindow(window);
- }
-
- /**
- * Setup parameters for GAP scanning--i.e. observer mode.
- * @param[in] timeout
- * Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
- *
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- *
- * @Note: The scan interval and window are recommendations to the BLE stack.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setScanTimeout(...) should be replaced with
- * ble.gap().setScanTimeout(...).
- */
- ble_error_t setScanTimeout(uint16_t timeout) {
- return gap().setScanTimeout(timeout);
- }
-
- /**
- * Setup parameters for GAP scanning--i.e. observer mode.
- * @param[in] activeScanning
- * Set to True if active-scanning is required. This is used to fetch the
- * scan response from a peer if possible.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setActiveScan(...) should be replaced with
- * ble.gap().setActiveScanning(...).
- */
- void setActiveScan(bool activeScanning) {
- gap().setActiveScanning(activeScanning);
- }
-
- /**
- * Start scanning (Observer Procedure) based on the parameters currently in
- * effect.
- *
- * @param[in] callback
- * The application specific callback to be invoked upon
- * receiving every advertisement report. This can be passed in
- * as NULL, in which case scanning may not be enabled at all.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.startScan(callback) should be replaced with
- * ble.gap().startScan(callback).
- */
- ble_error_t startScan(void (*callback)(const Gap::AdvertisementCallbackParams_t *params)) {
- return gap().startScan(callback);
- }
-
- /**
- * Same as above, but this takes an (object, method) pair for a callback.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.startScan(callback) should be replaced with
- * ble.gap().startScan(object, callback).
- */
- template<typename T>
- ble_error_t startScan(T *object, void (T::*memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
-
- /**
- * Stop scanning. The current scanning parameters remain in effect.
- *
- * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.stopScan() should be replaced with
- * ble.gap().stopScan().
- */
- ble_error_t stopScan(void) {
- return gap().stopScan();
- }
-
- /**
- * Create a connection (GAP Link Establishment).
- * @param peerAddr
- * 48-bit address, LSB format.
- * @param peerAddrType
- * Address type of the peer.
- * @param connectionParams
- * Connection parameters.
- * @param scanParams
- * Paramters to be used while scanning for the peer.
- * @return BLE_ERROR_NONE if connection establishment procedure is started
- * successfully. The onConnection callback (if set) will be invoked upon
- * a connection event.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.connect(...) should be replaced with
- * ble.gap().connect(...).
- */
- ble_error_t connect(const Gap::Address_t peerAddr,
- Gap::AddressType_t peerAddrType = Gap::ADDR_TYPE_RANDOM_STATIC,
- const Gap::ConnectionParams_t *connectionParams = NULL,
- const GapScanningParams *scanParams = NULL) {
- return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
- }
-
- /**
- * This call initiates the disconnection procedure, and its completion will
- * be communicated to the application with an invocation of the
- * onDisconnection callback.
- *
- * @param[in] connectionHandle
- * @param[in] reason
- * The reason for disconnection to be sent back to the peer.
- */
- ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
- return gap().disconnect(connectionHandle, reason);
- }
-
- /**
- * This call initiates the disconnection procedure, and its completion will
- * be communicated to the application with an invocation of the
- * onDisconnection callback.
- *
- * @param reason
- * The reason for disconnection to be sent back to the peer.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.disconnect(reason) should be replaced with
- * ble.gap().disconnect(reason).
- *
- * @note: this version of disconnect() doesn't take a connection handle. It
- * will work reliably only for stacks which are limited to a single
- * connection. This API should be considered *deprecated* in favour of the
- * alternative which takes a connection handle. It will be dropped in the future.
- */
- ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
- return gap().disconnect(reason);
- }
-
- /**
- * Returns the current GAP state of the device using a bitmask which
- * describes whether the device is advertising and/or connected.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getGapState() should be replaced with
- * ble.gap().getState().
- */
- Gap::GapState_t getGapState(void) const {
- return gap().getState();
- }
-
- /**
- * Get the GAP peripheral preferred connection parameters. These are the
- * defaults that the peripheral would like to have in a connection. The
- * choice of the connection parameters is eventually up to the central.
- *
- * @param[out] params
- * The structure where the parameters will be stored. Memory
- * for this is owned by the caller.
- *
- * @return BLE_ERROR_NONE if the parameters were successfully filled into
- * the given structure pointed to by params.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getPreferredConnectionParams() should be replaced with
- * ble.gap().getPreferredConnectionParams().
- */
- ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
- return gap().getPreferredConnectionParams(params);
- }
-
- /**
- * Set the GAP peripheral preferred connection parameters. These are the
- * defaults that the peripheral would like to have in a connection. The
- * choice of the connection parameters is eventually up to the central.
- *
- * @param[in] params
- * The structure containing the desired parameters.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setPreferredConnectionParams() should be replaced with
- * ble.gap().setPreferredConnectionParams().
- */
- ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
- return gap().setPreferredConnectionParams(params);
- }
-
- /**
- * Update connection parameters while in the peripheral role.
- * @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
- * the central to perform the procedure.
- * @param[in] handle
- * Connection Handle
- * @param[in] params
- * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
- * the parameters in the PPCP characteristic of the GAP service will be used instead.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.updateConnectionParams() should be replaced with
- * ble.gap().updateConnectionParams().
- */
- ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
- return gap().updateConnectionParams(handle, params);
- }
-
- /**
- * Set the device name characteristic in the GAP service.
- * @param[in] deviceName
- * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setDeviceName() should be replaced with
- * ble.gap().setDeviceName().
- */
- ble_error_t setDeviceName(const uint8_t *deviceName) {
- return gap().setDeviceName(deviceName);
- }
-
- /**
- * Get the value of the device name characteristic in the GAP service.
- * @param[out] deviceName
- * Pointer to an empty buffer where the UTF-8 *non NULL-
- * terminated* string will be placed. Set this
- * value to NULL in order to obtain the deviceName-length
- * from the 'length' parameter.
- *
- * @param[in/out] lengthP
- * (on input) Length of the buffer pointed to by deviceName;
- * (on output) the complete device name length (without the
- * null terminator).
- *
- * @note If the device name is longer than the size of the supplied buffer,
- * length will return the complete device name length, and not the
- * number of bytes actually returned in deviceName. The application may
- * use this information to retry with a suitable buffer size.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getDeviceName() should be replaced with
- * ble.gap().getDeviceName().
- */
- ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
- return gap().getDeviceName(deviceName, lengthP);
- }
-
- /**
- * Set the appearance characteristic in the GAP service.
- * @param[in] appearance
- * The new value for the device-appearance.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAppearance() should be replaced with
- * ble.gap().setAppearance().
- */
- ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
- return gap().setAppearance(appearance);
- }
-
- /**
- * Get the appearance characteristic in the GAP service.
- * @param[out] appearance
- * The new value for the device-appearance.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getAppearance() should be replaced with
- * ble.gap().getAppearance().
- */
- ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
- return gap().getAppearance(appearanceP);
- }
-
- /**
- * Set the radio's transmit power.
- * @param[in] txPower Radio transmit power in dBm.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setTxPower() should be replaced with
- * ble.gap().setTxPower().
- */
- ble_error_t setTxPower(int8_t txPower) {
- return gap().setTxPower(txPower);
- }
-
- /**
- * Query the underlying stack for permitted arguments for setTxPower().
- *
- * @param[out] valueArrayPP
- * Out parameter to receive the immutable array of Tx values.
- * @param[out] countP
- * Out parameter to receive the array's size.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getPermittedTxPowerValues() should be replaced with
- * ble.gap().getPermittedTxPowerValues().
- */
- void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
- gap().getPermittedTxPowerValues(valueArrayPP, countP);
- }
-
- /**
- * Add a service declaration to the local server ATT table. Also add the
- * characteristics contained within.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.addService() should be replaced with
- * ble.gattServer().addService().
- */
- ble_error_t addService(GattService &service) {
- return gattServer().addService(service);
- }
-
- /**
- * Read the value of a characteristic from the local GattServer
- * @param[in] attributeHandle
- * Attribute handle for the value attribute of the characteristic.
- * @param[out] buffer
- * A buffer to hold the value being read.
- * @param[in/out] lengthP
- * Length of the buffer being supplied. If the attribute
- * value is longer than the size of the supplied buffer,
- * this variable will hold upon return the total attribute value length
- * (excluding offset). The application may use this
- * information to allocate a suitable buffer size.
- *
- * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.readCharacteristicValue() should be replaced with
- * ble.gattServer().read().
- */
- ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
- return gattServer().read(attributeHandle, buffer, lengthP);
- }
-
- /**
- * Read the value of a characteristic from the local GattServer
- * @param[in] connectionHandle
- * Connection Handle.
- * @param[in] attributeHandle
- * Attribute handle for the value attribute of the characteristic.
- * @param[out] buffer
- * A buffer to hold the value being read.
- * @param[in/out] lengthP
- * Length of the buffer being supplied. If the attribute
- * value is longer than the size of the supplied buffer,
- * this variable will hold upon return the total attribute value length
- * (excluding offset). The application may use this
- * information to allocate a suitable buffer size.
- *
- * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
- *
- * @note This API is a version of above with an additional connection handle
- * parameter to allow fetches for connection-specific multivalued
- * attribtues (such as the CCCDs).
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.readCharacteristicValue() should be replaced with
- * ble.gattServer().read().
- */
- ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
- return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
- }
-
- /**
- * Update the value of a characteristic on the local GattServer.
- *
- * @param[in] attributeHandle
- * Handle for the value attribute of the Characteristic.
- * @param[in] value
- * A pointer to a buffer holding the new value
- * @param[in] size
- * Size of the new value (in bytes).
- * @param[in] localOnly
- * Should this update be kept on the local
- * GattServer regardless of the state of the
- * notify/indicate flag in the CCCD for this
- * Characteristic? If set to true, no notification
- * or indication is generated.
- *
- * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.updateCharacteristicValue() should be replaced with
- * ble.gattServer().write().
- */
- ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
- const uint8_t *value,
- uint16_t size,
- bool localOnly = false) {
- return gattServer().write(attributeHandle, value, size, localOnly);
- }
-
- /**
- * Update the value of a characteristic on the local GattServer. A version
- * of the same as above with connection handle parameter to allow updates
- * for connection-specific multivalued attribtues (such as the CCCDs).
- *
- * @param[in] connectionHandle
- * Connection Handle.
- * @param[in] attributeHandle
- * Handle for the value attribute of the Characteristic.
- * @param[in] value
- * A pointer to a buffer holding the new value
- * @param[in] size
- * Size of the new value (in bytes).
- * @param[in] localOnly
- * Should this update be kept on the local
- * GattServer regardless of the state of the
- * notify/indicate flag in the CCCD for this
- * Characteristic? If set to true, no notification
- * or indication is generated.
- *
- * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.updateCharacteristicValue() should be replaced with
- * ble.gattServer().write().
- */
- ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
- GattAttribute::Handle_t attributeHandle,
- const uint8_t *value,
- uint16_t size,
- bool localOnly = false) {
- return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
- }
-
- /**
- * Enable the BLE stack's Security Manager. The Security Manager implements
- * the actual cryptographic algorithms and protocol exchanges that allow two
- * devices to securely exchange data and privately detect each other.
- * Calling this API is a prerequisite for encryption and pairing (bonding).
- *
- * @param[in] enableBonding Allow for bonding.
- * @param[in] requireMITM Require protection for man-in-the-middle attacks.
- * @param[in] iocaps To specify IO capabilities of this peripheral,
- * such as availability of a display or keyboard to
- * support out-of-band exchanges of security data.
- * @param[in] passkey To specify a static passkey.
- *
- * @return BLE_ERROR_NONE on success.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.initializeSecurity(...) should be replaced with
- * ble.securityManager().init(...).
- */
- ble_error_t initializeSecurity(bool enableBonding = true,
- bool requireMITM = true,
- SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
- const SecurityManager::Passkey_t passkey = NULL) {
- return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
- }
-
- /**
- * Get the security status of a connection.
- *
- * @param[in] connectionHandle Handle to identify the connection.
- * @param[out] securityStatusP security status.
- *
- * @return BLE_SUCCESS Or appropriate error code indicating reason for failure.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.getLinkSecurity(...) should be replaced with
- * ble.securityManager().getLinkSecurity(...).
- */
- ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
- return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
- }
-
- /**
- * Delete all peer device context and all related bonding information from
- * the database within the security manager.
- *
- * @retval BLE_ERROR_NONE On success, else an error code indicating reason for failure.
- * @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization and/or
- * application registration.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.purgeAllBondingState() should be replaced with
- * ble.securityManager().purgeAllBondingState().
- */
- ble_error_t purgeAllBondingState(void) {
- return securityManager().purgeAllBondingState();
- }
-
- /**
- * Setup a callback for timeout events. Refer to Gap::TimeoutSource_t for
- * possible event types.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onTimeout(callback) should be replaced with
- * ble.gap().onTimeout(callback).
- */
- void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
- gap().onTimeout(timeoutCallback);
- }
-
- /**
- * Setup a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onConnection(callback) should be replaced with
- * ble.gap().onConnection(callback).
- */
- void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
- gap().onConnection(connectionCallback);
- }
-
- /**
- * Used to setup a callback for GAP disconnection.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onDisconnection(callback) should be replaced with
- * ble.gap().onDisconnection(callback).
- */
- void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
- gap().onDisconnection(disconnectionCallback);
- }
-
- /**
- * Append to a chain of callbacks to be invoked upon disconnection; these
- * callbacks receive no context and are therefore different from the
- * onDisconnection callback.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.addToDisconnectionCallchain(...) should be replaced with
- * ble.gap().addToDisconnectionCallchain(...).
- */
- template<typename T>
- void addToDisconnectionCallChain(T *tptr, void (T::*mptr)(void)) {
- gap().addToDisconnectionCallChain(tptr, mptr);
- }
-
- /**
- * Radio Notification is a feature that enables ACTIVE and INACTIVE
- * (nACTIVE) signals from the stack that notify the application when the
- * radio is in use. The signal is sent using software interrupt.
- *
- * The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
- * signal is sent at the end of the Radio Event. These signals can be used
- * by the application programmer to synchronize application logic with radio
- * activity. For example, the ACTIVE signal can be used to shut off external
- * devices to manage peak current drawn during periods when the radio is on,
- * or to trigger sensor data collection for transmission in the Radio Event.
- *
- * @param callback
- * The application handler to be invoked in response to a radio
- * ACTIVE/INACTIVE event.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onRadioNotification(...) should be replaced with
- * ble.gap().onRadioNotification(...).
- */
- void onRadioNotification(Gap::RadioNotificationEventCallback_t callback) {
- gap().onRadioNotification(callback);
- }
-
- /**
- * Add a callback for the GATT event DATA_SENT (which is triggered when
- * updates are sent out by GATT in the form of notifications).
- *
- * @Note: it is possible to chain together multiple onDataSent callbacks
- * (potentially from different modules of an application) to receive updates
- * to characteristics.
- *
- * @Note: it is also possible to setup a callback into a member function of
- * some object.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onDataSent(...) should be replaced with
- * ble.gattServer().onDataSent(...).
- */
- void onDataSent(void (*callback)(unsigned count)) {
- gattServer().onDataSent(callback);
- }
- template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
- gattServer().onDataSent(objPtr, memberPtr);
- }
-
- /**
- * Setup a callback for when an attribute has its value updated by or at the
- * connected peer. For a peripheral, this callback triggered when the local
- * GATT server has an attribute updated by a write command from the peer.
- * For a Central, this callback is triggered when a response is received for
- * a write request.
- *
- * @Note: it is possible to chain together multiple onDataWritten callbacks
- * (potentially from different modules of an application) to receive updates
- * to characteristics. Many services, such as DFU and UART add their own
- * onDataWritten callbacks behind the scenes to trap interesting events.
- *
- * @Note: it is also possible to setup a callback into a member function of
- * some object.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onDataWritten(...) should be replaced with
- * ble.gattServer().onDataWritten(...).
- */
- void onDataWritten(void (*callback)(const GattWriteCallbackParams *eventDataP)) {
- gattServer().onDataWritten(callback);
- }
- template <typename T> void onDataWritten(T * objPtr, void (T::*memberPtr)(const GattWriteCallbackParams *context)) {
- gattServer().onDataWritten(objPtr, memberPtr);
- }
-
- /**
- * Setup a callback to be invoked on the peripheral when an attribute is
- * being read by a remote client.
- *
- * @Note: this functionality may not be available on all underlying stacks.
- * You could use GattCharacteristic::setReadAuthorizationCallback() as an
- * alternative.
- *
- * @Note: it is possible to chain together multiple onDataRead callbacks
- * (potentially from different modules of an application) to receive updates
- * to characteristics. Services may add their own onDataRead callbacks
- * behind the scenes to trap interesting events.
- *
- * @Note: it is also possible to setup a callback into a member function of
- * some object.
- *
- * @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
- * else BLE_ERROR_NONE.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onDataRead(...) should be replaced with
- * ble.gattServer().onDataRead(...).
- */
- ble_error_t onDataRead(void (*callback)(const GattReadCallbackParams *eventDataP)) {
- return gattServer().onDataRead(callback);
- }
- template <typename T> ble_error_t onDataRead(T * objPtr, void (T::*memberPtr)(const GattReadCallbackParams *context)) {
- return gattServer().onDataRead(objPtr, memberPtr);
- }
-
- /**
- * Setup a callback for when notifications/indications are enabled for a
- * characteristic on the local GattServer.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onUpdatesEnabled(callback) should be replaced with
- * ble.gattServer().onUpdatesEnabled(callback).
- */
- void onUpdatesEnabled(GattServer::EventCallback_t callback) {
- gattServer().onUpdatesEnabled(callback);
- }
-
- /**
- * Setup a callback for when notifications/indications are disabled for a
- * characteristic on the local GattServer.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onUpdatesEnabled(callback) should be replaced with
- * ble.gattServer().onUpdatesEnabled(callback).
- */
- void onUpdatesDisabled(GattServer::EventCallback_t callback) {
- gattServer().onUpdatesDisabled(callback);
- }
-
- /**
- * Setup a callback for when the GATT server receives a response for an
- * indication event sent previously.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onConfirmationReceived(callback) should be replaced with
- * ble.gattServer().onConfirmationReceived(callback).
- */
- void onConfirmationReceived(GattServer::EventCallback_t callback) {
- gattServer().onConfirmationReceived(callback);
- }
-
- /**
- * Setup a callback for when the security setup procedure (key generation
- * and exchange) for a link has started. This will be skipped for bonded
- * devices. The callback is passed in parameters received from the peer's
- * security request: bool allowBonding, bool requireMITM, and
- * SecurityIOCapabilities_t.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.onSecuritySetupInitiated(callback) should be replaced with
- * ble.securityManager().onSecuritySetupInitiated(callback).
- */
- void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
- securityManager().onSecuritySetupInitiated(callback);
- }
-
- /**
- * Setup a callback for when the security setup procedure (key generation
- * and exchange) for a link has completed. This will be skipped for bonded
- * devices. The callback is passed in the success/failure status of the
- * security setup procedure.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.onSecuritySetupCompleted(callback) should be replaced with
- * ble.securityManager().onSecuritySetupCompleted(callback).
- */
- void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
- securityManager().onSecuritySetupCompleted(callback);
- }
-
- /**
- * Setup a callback for when a link with the peer is secured. For bonded
- * devices, subsequent reconnections with bonded peer will result only in
- * this callback when the link is secured and setup procedures will not
- * occur unless the bonding information is either lost or deleted on either
- * or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
- * to the level of security in effect for the secured link.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.onLinkSecured(callback) should be replaced with
- * ble.securityManager().onLinkSecured(callback).
- */
- void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
- securityManager().onLinkSecured(callback);
- }
-
- /**
- * Setup a callback for successful bonding; i.e. that link-specific security
- * context is stored persistently for a peer device.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.onSecurityContextStored(callback) should be replaced with
- * ble.securityManager().onSecurityContextStored(callback).
- */
- void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
- securityManager().onSecurityContextStored(callback);
- }
-
- /**
- * Setup a callback for when the passkey needs to be displayed on a
- * peripheral with DISPLAY capability. This happens when security is
- * configured to prevent Man-In-The-Middle attacks, and a PIN (or passkey)
- * needs to be exchanged between the peers to authenticate the connection
- * attempt.
- *
- * @note: This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.onPasskeyDisplay(callback) should be replaced with
- * ble.securityManager().onPasskeyDisplay(callback).
- */
- void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
- return securityManager().onPasskeyDisplay(callback);
- }
-
-public:
- BLE() : transport(createBLEInstance()) {
- /* empty */
- }
-
-private:
- BLEInstanceBase *const transport; /* the device specific backend */
-};
-
-typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
- * code. Will be dropped at some point soon.*/
-
-#endif // ifndef __BLE_H__
\ No newline at end of file