Diff: public/UUID.h

Revision:

716:11b41f651697

Parent:

715:6d415ac147aa

Child:

717:3129b149a6b2

--- a/public/UUID.h	Thu Jul 02 09:06:11 2015 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,141 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __UUID_H__
-#define __UUID_H__
-
-#include <string.h>
-
-#include "blecommon.h"
-
-class UUID {
-public:
-    enum UUID_Type_t {
-        UUID_TYPE_SHORT = 0,    // Short BLE UUID
-        UUID_TYPE_LONG  = 1     // Full 128-bit UUID
-    };
-
-    static const unsigned LENGTH_OF_LONG_UUID = 16;
-    typedef uint16_t ShortUUIDBytes_t;
-    typedef uint8_t  LongUUIDBytes_t[LENGTH_OF_LONG_UUID];
-
-public:
-    /**
-     * Creates a new 128-bit UUID
-     *
-     * @note   The UUID is a unique 128-bit (16 byte) ID used to identify
-     *         different service or characteristics on the BLE device.
-     *
-     * @param longUUID
-     *          The 128-bit (16-byte) UUID value, MSB first (big-endian).
-     */
-    UUID(const LongUUIDBytes_t longUUID) : type(UUID_TYPE_LONG), baseUUID(), shortUUID(0) {
-        setupLong(longUUID);
-    }
-
-    /**
-     * Creates a new 16-bit UUID
-     *
-     * @note The UUID is a unique 16-bit (2 byte) ID used to identify
-     *       different service or characteristics on the BLE device.
-     *
-     * For efficiency, and because 16 bytes would take a large chunk of the
-     * 27-byte data payload length of the Link Layer, the BLE specification adds
-     * two additional UUID formats: 16-bit and 32-bit UUIDs. These shortened
-     * formats can be used only with UUIDs that are defined in the Bluetooth
-     * specification (i.e., that are listed by the Bluetooth SIG as standard
-     * Bluetooth UUIDs).
-     *
-     * To reconstruct the full 128-bit UUID from the shortened version, insert
-     * the 16-bit short value (indicated by xxxx, including leading zeros) into
-     * the Bluetooth Base UUID:
-     *
-     *  0000xxxx-0000-1000-8000-00805F9B34FB
-     *
-     * @note Shortening is not available for UUIDs that are not derived from the
-     *       Bluetooth Base UUID. Such non-standard UUIDs are commonly called
-     *       vendor-specific UUIDs. In these cases, you’ll need to use the full
-     *       128-bit UUID value at all times.
-     *
-     * @note we don't yet support 32-bit shortened UUIDs.
-     */
-    UUID(ShortUUIDBytes_t shortUUID) : type(UUID_TYPE_SHORT), baseUUID(), shortUUID(shortUUID) {
-        /* empty */
-    }
-
-    UUID(const UUID &source) {
-        type      = source.type;
-        shortUUID = source.shortUUID;
-        memcpy(baseUUID, source.baseUUID, LENGTH_OF_LONG_UUID);
-    }
-
-    UUID(void) : type(UUID_TYPE_SHORT), shortUUID(BLE_UUID_UNKNOWN) {
-        /* empty */
-    }
-
-    /**
-     * Fill in a 128-bit UUID; this is useful when UUID isn't known at the time of object construction.
-     */
-    void setupLong(const LongUUIDBytes_t longUUID) {
-        type      = UUID_TYPE_LONG;
-        memcpy(baseUUID, longUUID, LENGTH_OF_LONG_UUID);
-        shortUUID = (uint16_t)((longUUID[2] << 8) | (longUUID[3]));
-    }
-
-public:
-    UUID_Type_t       shortOrLong(void)  const {return type;     }
-    const uint8_t    *getBaseUUID(void)  const {
-        if (type == UUID_TYPE_SHORT) {
-            return (const uint8_t*)&shortUUID;
-        } else {
-            return baseUUID;
-        }
-    }
-
-    ShortUUIDBytes_t  getShortUUID(void) const {return shortUUID;}
-    uint8_t           getLen(void)       const {
-        return ((type == UUID_TYPE_SHORT) ? sizeof(ShortUUIDBytes_t) : LENGTH_OF_LONG_UUID);
-    }
-
-    bool operator== (const UUID &other) const {
-        if ((this->type == UUID_TYPE_SHORT) && (other.type == UUID_TYPE_SHORT) &&
-            (this->shortUUID == other.shortUUID)) {
-            return true;
-        }
-
-        if ((this->type == UUID_TYPE_LONG) && (other.type == UUID_TYPE_LONG) &&
-            (memcmp(this->baseUUID, other.baseUUID, LENGTH_OF_LONG_UUID) == 0)) {
-            return true;
-        }
-
-        return false;
-    }
-
-    bool operator!= (const UUID &other) const {
-        return !(*this == other);
-    }
-
-private:
-    UUID_Type_t      type;      // UUID_TYPE_SHORT or UUID_TYPE_LONG
-    LongUUIDBytes_t  baseUUID;  /* the base of the long UUID (if
-                            * used). Note: bytes 12 and 13 (counting from LSB)
-                            * are zeroed out to allow comparison with other long
-                            * UUIDs which differ only in the 16-bit relative
-                            * part.*/
-    ShortUUIDBytes_t shortUUID; // 16 bit uuid (byte 2-3 using with base)
-};
-
-#endif // ifndef __UUID_H__
\ No newline at end of file